summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)Author
2007-10-03Merge branch 'linux-2.6' into for-2.6.24Paul Mackerras
2007-10-01[TCP]: secure_tcp_sequence_number() should not use a too fast clockEric Dumazet
TCP V4 sequence numbers are 32bits, and RFC 793 assumed a 250 KHz clock. In order to follow network speed increase, we can use a faster clock, but we should limit this clock so that the delay between two rollovers is greater than MSL (TCP Maximum Segment Lifetime : 2 minutes) Choosing a 64 nsec clock should be OK, since the rollovers occur every 274 seconds. Problem spotted by Denys Fedoryshchenko [ This bug was introduced by f85958151900f9d30fa5ff941b0ce71eaa45a7de ] Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-01VT ioctl race fixSamuel Ortiz
When calling the RELDISP VT ioctl, we are reading vt_newvt while the console workqueue could be messing with it (through change_console()). We fix this race by taking the console semaphore before reading vt_newvt. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Acked-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-29fix console change race exposed by CFSJan Lübbe
The new behaviour of CFS exposes a race which occurs if a switch is requested when vt_mode.mode is VT_PROCESS. The process with vc->vt_pid is signaled before vc->vt_newvt is set. This causes the switch to fail when triggered by the monitoing process because the target is still -1. [ If the signal sending fails, the subsequent "reset_vc(vc)" will then reset vt_newvt to -1, so this works for that case too. - Linus ] Signed-off-by: Jan Lübbe <jluebbe@lasnet.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-27i915: make vbl interrupts work properly on i965g/gm hw.Dave Airlie
This code is ported from the DRM git tree and allows the vblank interrupts to function on the i965 hw. It also requires a change in Mesa's 965 driver to actually use them. [ Without this patch, my 965GM drops vblank interrupts - Jesse ] Signed-off-by: Dave Airlie <airlied@linux.ie> Acked-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-26Silent drivers/char/hpet.c build warnings on i386S.Çağlar Onur
Following patch silents; ... drivers/char/hpet.c:72: warning: 'clocksource_hpet' defined but not used drivers/char/hpet.c:81: warning: 'hpet_clocksource' defined but not used ... build warnings on i386, they appeared after commit 3b2b64fd311c92f2137eb7cee7025794cd854057 Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> -- drivers/char/hpet.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
2007-09-26Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: hpet: ACPI Error (utglobal-0126): Unknown exception code: 0xFFFFFFF0 ACPI: CONFIG_ACPI_SLEEP=n power off regression in 2.6.23-rc8 (NOT in rc7) ACPI: suspend: build-fix for CONFIG_SUSPEND=n and CONFIG_HIBERNATION=y
2007-09-25ACPI: hpet: ACPI Error (utglobal-0126): Unknown exception code: 0xFFFFFFF0Zhao Yakui
If hpet has been initialized before registering hpet driver, the callback function of hpet_resources will return the status code of -EBUSY, which is not defined in the ACPI exception table. So when ACPI checks the status code of callback function, it will report the unknown exception code. So the status code in ACPI is used instead of the generic error code in the ACPI callback function of hpet_resources. For example: -EBUSY is replaced by AE_ALREADY_EXISTS -EINVAL is replaced by AE_NO_MEMORY http://bugzilla.kernel.org/show_bug.cgi?id=8630 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-25fix "mspec: handle shrinking virtual memory areas"Cliff Wickman
The vma_data structure may be shared by vma's from multiple tasks, with no way of knowing which areas are shared or not shared, so release/clear pages only when the refcount (of vma's) goes to zero. Signed-off-by: Cliff Wickman <cpw@sgi.com> Cc: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-20Merge branch 'linux-2.6'Paul Mackerras
2007-09-19intel-agp: Fix i830 mask variable that changed with G33 supportDave Airlie
The mask on i830 should be 0x70 always, later chips 0xF0 should be okay. Signed-off-by: Dave Airlie <airlied@linux.ie> Acked-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Cc: Michael Haas <laga@laga.ath.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19pci: fix unterminated pci_device_id listsKees Cook
Fix a couple drivers that do not correctly terminate their pci_device_id lists. This results in garbage being spewed into modules.pcimap when the module happens to not have 28 NULL bytes following the table, and/or the last PCI ID is actually truncated from the table when calculating the modules.alias PCI aliases, cause those unfortunate device IDs to not auto-load. Signed-off-by: Kees Cook <kees@ubuntu.com> Acked-by: Corey Minyard <minyard@acm.org> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19mspec: handle shrinking virtual memory areasCliff Wickman
The shrinking of a virtual memory area that is mmap(2)'d to a memory special file (device drivers/char/mspec.c) can cause a panic. If the mapped size of the vma (vm_area_struct) is very large, mspec allocates a large vma_data structure with vmalloc(). But such a vma can be shrunk by an munmap(2). The current driver uses the current size of each vma to deduce whether its vma_data structure was allocated by kmalloc() or vmalloc(). So if the vma was shrunk it appears to have been allocated by kmalloc(), and mspec attempts to free it with kfree(). This results in a panic. This patch avoids the panic (by preserving the type of the allocation) and also makes mspec work correctly as the vma is split into pieces by the munmap(2)'s. All vma's derived from such a split vma share the same vma_data structure that represents all the pages mapped into this set of vma's. The mpec driver must be made capable of using the right portion of the structure for each member vma. In other words, it must index into the array of page addresses using the portion of the array that represents the current vma. This is enabled by storing the vma group's vm_start in the vma_data structure. The shared vma_data's are not protected by mm->mmap_sem in the fork() case so the reference count is left as atomic_t. Signed-off-by: Cliff Wickman <cpw@sgi.com> Acked-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-15sparc64 (and others): fix tty_ioctl.c buildTony Breeds
Add Guards around TIOCSLCKTRMIOS and TIOCGLCKTRMIOS. Several architectures are still broken. Put temporary-for-2.6.23 ifdef guards around the offending code. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-14Merge branch 'linux-2.6' into for-2.6.24Paul Mackerras
2007-09-11intel_agp: fix GTT map size on G33Zhenyu Wang
G33 has 1MB GTT table range. Fix GTT mapping in case like 512MB aperture size. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11intel_agp: fix stolen mem range on G33Zhenyu Wang
G33 GTT stolen memory is below graphics data stolen memory and be seperate, so don't subtract it in stolen mem counting. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11tty: termios locking functions break with new termios typeDavid Miller
I ran into a few problems. n_tty_ioctl() for instance: drivers/char/tty_ioctl.c:799: error: $,1rxstruct termios$,1ry has no member named $,1rxc_ispeed$,1ry This is calling the copy interface that is supposed to be using a termios2 when the new interfaces are defined, however: case TIOCGLCKTRMIOS: if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked)) return -EFAULT; return 0; This is going to write over the end of the userspace structure by a few bytes, and wasn't caught by you yet because the i386 implementation is simply copy_to_user() which does zero type checking. Signed-off-by: Alan Cox <alan@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31Do not use the ia64 clocksource on non-ia64 architecturesLinus Torvalds
The HPET clocksource in drivers/char/hpet.c was written as generic code for ia64, but it is not yet ready to replace the native HPET clocksource implementations that the i386/x86-64 architectures use. On x86[-64], trying to register this clocksource results in potentially multiple hpet-based clocksources being registered, and if the ia64 one is chosen on x86_64 some users have experienced hangs. Eventually all three architectures may end up using the same code, but that is not the case right now. Cc: John Stultz <johnstul@us.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Paolo Ornati <ornati@fastwebnet.it> Cc: Bob Picco <bob.picco@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-28Merge branch 'linux-2.6' into for-2.6.24Paul Mackerras
2007-08-27[MIPS] Delete duplicate inclusion of <linux/delay.h>.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-25Merge branch 'agp-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6 * 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp: balance ioremap checks agp: Add device id for P4M900 to via-agp module efficeon-agp leaks 'struct agp_bridge_data' in error paths of agp_efficeon_probe()
2007-08-25Merge branch 'drm-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: ioremap return value checks drm/via: Fix dmablit when blit queue is full drm_rmmap_ioctl(): remove dead code
2007-08-25drm: ioremap return value checksScott Thompson
Signed-off-by: Scott Thompson <postfail <at> hushmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-25agp: balance ioremap checksScott Thompson
patchset against 2.6.23-rc3. corrects missing ioremap return checks and balancing on iounmap calls, integrated changes per list recommendations on the original set of patches.. Signed-off-by: Scott Thompson <postfail <at> hushmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-25agp: Add device id for P4M900 to via-agp moduleXavier Bachelot
Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-25Pull events into release branchLen Brown
Conflicts: drivers/acpi/video.c Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-23tty: dont needlessly cast kmalloc() return valueJesper Juhl
kmalloc() hands us a void pointer, we don't need to cast it. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-23ACPI: Schedule /proc/acpi/event for removalLen Brown
Schedule /proc/acpi/event for removal in 6 months. Re-name acpi_bus_generate_event() to acpi_bus_generate_proc_event() to make sure there is no confusion that it is for /proc/acpi/event only. Add CONFIG_ACPI_PROC_EVENT to allow removal of /proc/acpi/event. There is no functional change if CONFIG_ACPI_PROC_EVENT=y Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-22synclink_gt fix module referencePaul Fulghum
Get module reference on open() by generic HDLC to prevent module from unloading while interface is active. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22IPMI: fix warning in ipmi_si_intf.cMijo Safradin
trivial change: fix warning Signed-off-by: Mijo Safradin <safradin@de.ibm.com> Acked-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22m68k/mac: Make mac_hid_mouse_emulate_buttons() declaration visibleGeert Uytterhoeven
m68k/mac: Make mac_hid_mouse_emulate_buttons() declaration visible drivers/char/keyboard.c: In function 'kbd_keycode': drivers/char/keyboard.c:1142: error: implicit declaration of function 'mac_hid_mouse_emulate_buttons' The forward declaration of mac_hid_mouse_emulate_buttons() is not visible on m68k because it's hidden in the middle of a big #ifdef block. Move it to <linux/kbd_kern.h>, correct the type of the second parameter, and include <linux/kbd_kern.h> where needed. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22tpmdd maintainersKent Yoder
Fix up the maintainers info in the tpm drivers. Kylene will be out for some time, so copying the sourceforge list is the best way to get some attention. Cc: Marcel Selhorst <tpm@selhorst.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-17[POWERPC] Use of_get_property in ipmi codeStephen Rothwell
get_property has been renamed to of_get_property. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17[POWERPC] Init markings for hvc_beatIshizaki Kou
Fix warnings about section mismatch. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-16[WATCHDOG] Add support for 1533 bridge to alim1535_wdtAndrey Borzenkov
From: Andrey Borzenkov <arvidjaar@mail.ru> They are apparently pretty close (even lspci combines them). The patch adds support for 0x1533 bridge in addition to 0x1535. Tested on Toshiba Portege 4000 with 00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533] 00:08.0 Bridge [0680]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101] with result [ 2090.906736] PCI: Enabling device 0000:00:08.0 (0000 -> 0001) [ 2090.914034] ALi_M1535: initialized. timeout=3D60 sec (nowayout=3D0) Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-08-16[WATCHDOG] Eurotechwdt.c - clean-up commentsWim Van Sebroeck
Clean-up history and add a comment about the fact that the watchdog is actually part of the SMSC FDC 37B782 super I/O chipset. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-08-12pull asus sony thinkpad into release branchLen Brown
2007-08-11lguest files should explicitly include asm/paravirt.hJes Sorensen
Files using bits from paravirt.h should explicitly include it rather than relying on it being pulled in by something else. Signed-off-by: Jes Sorensen <jes@sgi.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11fix serial buffer memory leakAlan Cox
Patch c5c34d4862e18ef07c1276d233507f540fb5a532 (tty: flush flip buffer on ldisc input queue flush) introduces a race condition which can lead to memory leaks. The problem can be triggered when tcflush() is called when data are being pushed to the line discipline driver by flush_to_ldisc(). flush_to_ldisc() releases tty->buf.lock when calling the line discipline receive_buf function. At that poing tty_buffer_flush() kicks in and sets both tty->buf.head and tty->buf.tail to NULL. When flush_to_ldisc() finishes, it restores tty->buf.head but doesn't touch tty->buf.tail. This corrups the buffer queue, and the next call to tty_buffer_request_room() will allocate a new buffer and overwrite tty->buf.head. The previous buffer is then lost forever without being released. (Thanks to Laurent for the above text, for finding, disgnosing and reporting the bug) - Use tty->flags bits for the flush status. - Wait for the flag to clear again before returning - Fix the doc error noted - Fix flush of empty queue leaving stale flushpending [akpm@linux-foundation.org: cleanup] Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Paul Fulghum <paulkf@microgate.com> Cc: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11drivers/char/pcmcia/cm40x0_cs.c: fix release function callDaniel Ritz
cm4000_cs.c and cm4040_cs.c call the internal release function with an argument of wrong type. this fixes bug #8485 Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Bill McConnaughey <mcconnau@biochem.wustl.edu> Cc: Natalie Protasevich <protasnb@gmail.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-06drm/i915: Fix i965 secured batchbuffer usageDave Airlie
This 965G and above chipsets moved the batch buffer non-secure bits to another place. This means that previous drm's allowed in-secure batchbuffers to be submitted to the hardware from non-privileged users who are logged into X and and have access to direct rendering. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-06efficeon-agp leaks 'struct agp_bridge_data' in error paths of ↵Jesper Juhl
agp_efficeon_probe() (This is a resend of a patch originally submitted on 24-Jul-2007 00:14) Ok, this is something the coverity checker found (CID: 1813). I'm not at all intimate with this code, so I'm not sure if this attempt at a fix is correct (but at least it compiles). Please look it over and NACK if bad or merge if good ;-) Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-03sonypi: fix ids member of struct acpi_driverEugene Teo
ids member of struct acpi_driver is of type struct acpi_device_id, not a character array. Signed-off-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (28 commits) [WATCHDOG] Fix pcwd_init_module crash [WATCHDOG] ICH9 support for iTCO_wdt [WATCHDOG] 631xESB/632xESB support for iTCO_wdt - add all LPC bridges [WATCHDOG] 631xESB/632xESB support for iTCO_wdt [WATCHDOG] omap_wdt.c - default error for IOCTL is -ENOTTY [WATCHDOG] Return value of nonseekable_open [WATCHDOG] mv64x60_wdt: Rework the timeout register manipulation [WATCHDOG] mv64x60_wdt: disable watchdog timer when driver is probed [WATCHDOG] mv64x60_wdt: Support the WDIOF_MAGICCLOSE feature [WATCHDOG] mv64x60_wdt: Add a module parameter to change nowayout setting [WATCHDOG] mv64x60_wdt: Add WDIOC_SETOPTIONS ioctl support [WATCHDOG] mv64x60_wdt: Support for WDIOC_SETTIMEOUT ioctl [WATCHDOG] mv64x60_wdt: Fix WDIOC_GETTIMEOUT return value [WATCHDOG] mv64x60_wdt: Check return value of nonseekable_open [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support [WATCHDOG] mv64x60_wdt: Get register address from platform data [WATCHDOG] mv64x60_wdt: set up platform_device in platform code [WATCHDOG] ensure mouse and keyboard ignored in w83627hf_wdt [WATCHDOG] s3c2410_wdt: fixup after arch include moves [WATCHDOG] git-watchdog-typo ...
2007-07-31ip2main warning fixAndrew Morton
CONFIG_PCI=n: drivers/char/ip2/ip2main.c: In function `ip2_loadmain': drivers/char/ip2/ip2main.c:503: warning: unused variable `status' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31ipmi: Fix mem leak in try_init_dmi()Jesper Juhl
This is only called at init time and only happens if the BIOS screws something up, so the leak is slight and it is probably not worth sending to 2.6.22.x. The driver would not initialize the interface in the case, and I have no reports of this happening. I have booted and run tests on a system with this patch. Note that the original patch was munged by the mailer, here's a new one. If we ever hit the "default:" case in the switch in try_init_dmi(), then we'll leak the storage allocated with kzalloc() and assigned to 'info'. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31synclink_gt: fix transmit DMA stallPaul Fulghum
Fix transmit DMA stall when write() called in window after previous transmit DMA completes but before previous serial transmission completes. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29Remove fs.h from mm.hAlexey Dobriyan
Remove fs.h from mm.h. For this, 1) Uninline vma_wants_writenotify(). It's pretty huge anyway. 2) Add back fs.h or less bloated headers (err.h) to files that need it. As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files rebuilt down to 3444 (-12.3%). Cross-compile tested without regressions on my two usual configs and (sigh): alpha arm-mx1ads mips-bigsur powerpc-ebony alpha-allnoconfig arm-neponset mips-capcella powerpc-g5 alpha-defconfig arm-netwinder mips-cobalt powerpc-holly alpha-up arm-netx mips-db1000 powerpc-iseries arm arm-ns9xxx mips-db1100 powerpc-linkstation arm-assabet arm-omap_h2_1610 mips-db1200 powerpc-lite5200 arm-at91rm9200dk arm-onearm mips-db1500 powerpc-maple arm-at91rm9200ek arm-picotux200 mips-db1550 powerpc-mpc7448_hpc2 arm-at91sam9260ek arm-pleb mips-ddb5477 powerpc-mpc8272_ads arm-at91sam9261ek arm-pnx4008 mips-decstation powerpc-mpc8313_rdb arm-at91sam9263ek arm-pxa255-idp mips-e55 powerpc-mpc832x_mds arm-at91sam9rlek arm-realview mips-emma2rh powerpc-mpc832x_rdb arm-ateb9200 arm-realview-smp mips-excite powerpc-mpc834x_itx arm-badge4 arm-rpc mips-fulong powerpc-mpc834x_itxgp arm-carmeva arm-s3c2410 mips-ip22 powerpc-mpc834x_mds arm-cerfcube arm-shannon mips-ip27 powerpc-mpc836x_mds arm-clps7500 arm-shark mips-ip32 powerpc-mpc8540_ads arm-collie arm-simpad mips-jazz powerpc-mpc8544_ds arm-corgi arm-spitz mips-jmr3927 powerpc-mpc8560_ads arm-csb337 arm-trizeps4 mips-malta powerpc-mpc8568mds arm-csb637 arm-versatile mips-mipssim powerpc-mpc85xx_cds arm-ebsa110 i386 mips-mpc30x powerpc-mpc8641_hpcn arm-edb7211 i386-allnoconfig mips-msp71xx powerpc-mpc866_ads arm-em_x270 i386-defconfig mips-ocelot powerpc-mpc885_ads arm-ep93xx i386-up mips-pb1100 powerpc-pasemi arm-footbridge ia64 mips-pb1500 powerpc-pmac32 arm-fortunet ia64-allnoconfig mips-pb1550 powerpc-ppc64 arm-h3600 ia64-bigsur mips-pnx8550-jbs powerpc-prpmc2800 arm-h7201 ia64-defconfig mips-pnx8550-stb810 powerpc-ps3 arm-h7202 ia64-gensparse mips-qemu powerpc-pseries arm-hackkit ia64-sim mips-rbhma4200 powerpc-up arm-integrator ia64-sn2 mips-rbhma4500 s390 arm-iop13xx ia64-tiger mips-rm200 s390-allnoconfig arm-iop32x ia64-up mips-sb1250-swarm s390-defconfig arm-iop33x ia64-zx1 mips-sead s390-up arm-ixp2000 m68k mips-tb0219 sparc arm-ixp23xx m68k-amiga mips-tb0226 sparc-allnoconfig arm-ixp4xx m68k-apollo mips-tb0287 sparc-defconfig arm-jornada720 m68k-atari mips-workpad sparc-up arm-kafa m68k-bvme6000 mips-wrppmc sparc64 arm-kb9202 m68k-hp300 mips-yosemite sparc64-allnoconfig arm-ks8695 m68k-mac parisc sparc64-defconfig arm-lart m68k-mvme147 parisc-allnoconfig sparc64-up arm-lpd270 m68k-mvme16x parisc-defconfig um-x86_64 arm-lpd7a400 m68k-q40 parisc-up x86_64 arm-lpd7a404 m68k-sun3 powerpc x86_64-allnoconfig arm-lubbock m68k-sun3x powerpc-cell x86_64-defconfig arm-lusl7200 mips powerpc-celleb x86_64-up arm-mainstone mips-atlas powerpc-chrp32 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29[WATCHDOG] Fix pcwd_init_module crashWim Van Sebroeck
Fix for the problem detected by Ingo Molnar: enabling CONFIG_PCWATCHDOG=y crashes bzImage bootup. The reason for this can be found in drivers/makefile We first do: obj-y += char/ and later we do: obj-y += base/ block/ misc/ mfd/ net/ media/ So if we put a platform or isa or usb bus driver in char/watchdog (which is called from the Makefile in drivers/char/Makefile) then we didn't have the different device drivers initialized yet (they are in drivers/base and drivers/usb and ...) This fix makes sure that we compile the watchdog drivers after drivers/base, drivers/misc, drivers/pci and drivers/usb. We also do the compile after hwmon because in the future the watchdog temperature support will use the hwmon system. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-25 20:11:29 +0000