summaryrefslogtreecommitdiff
path: root/drivers/clk/qcom
AgeCommit message (Collapse)Author
2018-12-14Merge branch 'clk-fixes' into clk-nextStephen Boyd
* clk-fixes: clk: qcom: qcs404: Fix gpll0_out_main parent clk: zynqmp: Off by one in zynqmp_is_valid_clock() clk: mmp: Off by one in mmp_clk_add() clk: mvebu: Off by one bugs in cp110_of_clk_get() arm64: dts: qcom: sdm845-mtp: Mark protected gcc clocks clk: zynqmp: handle fixed factor param query error clk: qcom: gcc: Fix board clock node name clk: meson: axg: mark fdiv2 and fdiv3 as critical clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICAL clk: fixed-factor: fix of_node_get-put imbalance
2018-12-14Merge branch 'clk-qcom-8998-resets' into clk-nextStephen Boyd
- Add resets and make Qualcomm MSM8998 GCC driver more functional * clk-qcom-8998-resets: clk: qcom: Drop unused 8998 clock clk: qcom: Leave mmss noc on for 8998 clk: qcom: Add missing msm8998 resets clk: qcom: gcc-msm8998: Add clkref clocks clk: qcom: gcc-msm8998: Disable halt check of UFS clocks clk: qcom: gcc-msm8998: Drop hmss_dvm and lpass_at clk: qcom: Enumerate remaining msm8998 resets clk: qcom: Add xo dummy clk on msm8998 clk: qcom: Fix MSM8998 resets
2018-12-14clk: qcom: Drop unused 8998 clockJeffrey Hugo
gcc_lpass_trig_clk is not used downstream, therefore there is no reason to expect it to be needed for clients. Let's remove it because messing with the clock has been observed to cause Linux hangs when the qdss_clk is initialized by rpmcc. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support) Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14clk: qcom: Leave mmss noc on for 8998Jeffrey Hugo
Similar to other qcom targets, gcc_mmss_noc_cfg_ahb_clk should not be disabled. Any mmss access depends on this clock, and its been observed that enabling mmssnoc_axi_rpm_clk with rpmcc results in an implicit access to mmss and will crash the system if gcc_mmss_noc_cfg_ahb_clk is disabled. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support) Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14Merge branches 'clk-managed-registration', 'clk-spdx', 'clk-remove-basic' ↵Stephen Boyd
and 'clk-ops-const' into clk-next - Make devm_of_clk_add_hw_provider() use parent dt node if necessary - Various SPDX taggings - Mark clk_ops const when possible * clk-managed-registration: clk: bd718x7: Initial support for ROHM bd71837/bd71847 PMIC clock clk: apcs-msm8916: simplify probe cleanup by using devm clk: clk-twl6040: Free of_provider at remove clk: rk808: use managed version of of_provider registration clk: clk-hi655x: Free of_provider at remove clk: of-provider: look at parent if registered device has no provider info clk: Add kerneldoc to managed of-provider interfaces * clk-spdx: clk: Tag basic clk types with SPDX clk: Tag clk core files with SPDX clk: bcm2835: Switch to SPDX identifier * clk-remove-basic: clk: Loongson1: Remove usage of CLK_IS_BASIC clk: samsung: s3c2410: Remove usage of CLK_IS_BASIC clk: versatile: sp810: Remove usage of CLK_IS_BASIC clk: hisilicon: Remove usage of CLK_IS_BASIC clk: h8300: Remove usage of CLK_IS_BASIC clk: axm5516: Remove usage of CLK_IS_BASIC clk: st: Remove usage of CLK_IS_BASIC clk: renesas: Remove usage of CLK_IS_BASIC * clk-ops-const: clk: s2mps11: constify clk_ops structure clk: pxa: constify clk_ops structures clk: pistachio: constify clk_ops structures clk: palmas: constify clk_ops structure clk: max77686: constify clk_ops structure
2018-12-14Merge branch 'clk-qcom-sdm845-lpass' into clk-nextStephen Boyd
- Qualcomm SDM845 audio subsystem clks * clk-qcom-sdm845-lpass: clk: qcom: Add lpass clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM LPASS clock bindings dt-bindings: clock: Update GCC bindings for protected-clocks
2018-12-14Merge branches 'clk-qcom-kconfig', 'clk-qcom-gpucc', 'clk-qcom-qcs404-rpm', ↵Stephen Boyd
'clk-qcom-spi' and 'clk-qcom-videocc-binding' into clk-next - Qualcomm SDM845 GPU clock controllers - Qualcomm QCS404 RPM clk support * clk-qcom-kconfig: clk: qcom: Move to menuconfig and reduce lines * clk-qcom-gpucc: dt-bindings: clock: qcom: Fix the xo parent in gpucc example clk: qcom: gpu_cc_gmu_clk_src has 5 parents, not 6 clk: qcom: Add a dummy enable function for GX gdsc clk: qcom: gdsc: Don't override existing gdsc pd functions clk: qcom: Add graphics clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Graphics clock bindings * clk-qcom-qcs404-rpm: clk: qcom: smd: Add support for QCS404 rpm clocks * clk-qcom-spi: clk: qcom: msm8916: Additional clock rates for spi * clk-qcom-videocc-binding: dt-bindings: clock: Require #reset-cells in sdm845-videocc
2018-12-11clk: qcom: Add missing msm8998 resetsJeffrey Hugo
commit c0cb7c7e7164 ("clk: qcom: Enumerate remaining msm8998 resets") missed two USB2 resets. Add them. Fixes: c0cb7c7e7164 ("clk: qcom: Enumerate remaining msm8998 resets") Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: qcom: Move to menuconfig and reduce linesStephen Boyd
We duplicate the 'depends on' in almost every Kconfig here, and it's getting out of hand now that we have tens of options for various SoC drivers here. Let's clean it up a little by making a menuconfig for a submenu and adding an if wrapper around the driver section. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: qcom: qcs404: Fix gpll0_out_main parentSrinivas Kandagatla
gpll0_out_main parent is cxo so fix it. Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-05clk: qcom: gcc-msm8998: Add clkref clocksBjorn Andersson
Add clkref clocks for usb3, hdmi, ufs, pcie, and usb2. They are all sourced off CXO_IN, so parent them off "xo" until a proper link to the rpmcc can be described in DT. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-05clk: qcom: gcc-msm8998: Disable halt check of UFS clocksBjorn Andersson
Drop the halt check of the UFS symbol clocks, in accordance with other platforms. This makes clk_disable_unused() happy and makes it possible to turn the clocks on again without an error. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-05clk: qcom: gcc-msm8998: Drop hmss_dvm and lpass_atBjorn Andersson
Disabling gcc_hmss_dvm_bus_clk and gcc_lpass_at_clk causes the board to lock up, and by that preventing the kernel to boot without clk_ignore_unused. gcc_hmss_dvm_bus_clk is marked always-on downstream, but not referenced, and gcc_lpass_at_clk isn't mentioned. So let's remove them until they are needed by some client. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-05clk: qcom: Enumerate remaining msm8998 resetsJeffrey Hugo
The current list of defined resets is incomplete compared to what the hardware implements. Enumerate the remaining resets according to the hardware documentation. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-05clk: qcom: Add xo dummy clk on msm8998Stephen Boyd
We have this dummy factor clk in place to workaround a missing rpm clk driver that can manage the XO clk state. Add it in to match what we do on msm8996. Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Tested-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-05clk: apcs-msm8916: simplify probe cleanup by using devmMatti Vaittinen
use devm variant for of_provider registration. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> [sboyd@kernel.org: Drop unused parent pointer] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-03clk: qcom: Fix MSM8998 resetsJeffrey Hugo
The offsets for the defined BCR reset registers does not match the hardware documentation. Update the values to match the hardware documentation. Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver) Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-03clk: qcom: Add lpass clock controller driver for SDM845Taniya Das
Add support for the lpass clock controller found on SDM845 based devices. This would allow lpass peripheral loader drivers to control the clocks to bring the subsystem out of reset. LPASS clocks present on the global clock controller would be registered with the clock framework based on the protected-clock flag. Also do not gate these clocks if they are left unused, as the lpass clocks require the global clock controller lpass clocks to be enabled before they are accessed. Mark the GCC lpass clocks as CRITICAL, for the LPASS clock access. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-30clk: qcom: msm8916: Additional clock rates for spiLoic Poulain
Add SPI friendly clock rates to the spi freq table. Today it's not possible to use SPI at lower than 960Khz. This patch adds 100/250/500/1000 kHz configs to the table. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-28clk: qcom: gpu_cc_gmu_clk_src has 5 parents, not 6Douglas Anderson
In an earlier version of commit 453361cdd757 ("clk: qcom: Add graphics clock controller driver for SDM845") there were 6 listed parents for "gpu_cc_gmu_clk_src". In the version that landed there were 5. ...but "num_parents" was still left at 6. On my system this goes boom at bootup. Fixes: 453361cdd757 ("clk: qcom: Add graphics clock controller driver for SDM845") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-27Merge branch 'clk-protected-binding' into clk-fixesStephen Boyd
* clk-protected-binding: clk: qcom: Support 'protected-clocks' property dt-bindings: clk: Introduce 'protected-clocks' property
2018-11-27clk: qcom: Add a dummy enable function for GX gdscJordan Crouse
Most of the time the CPU should not be touching the GX domain on the GPU except for a very special use case when the CPU needs to force the GX headswitch off. Add a dummy enable function for the GX gdsc to simulate success so that the pm_runtime reference counting is correct. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-27clk: qcom: gdsc: Don't override existing gdsc pd functionsJordan Crouse
In extreme cases an individual gdsc may wish to override the power domain enable or disable callback functions for their own purposes. Only set the generic gdsc callback if the function pointers are not already set. Acked-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-27clk: qcom: Add graphics clock controller driver for SDM845Amit Nischal
Add support for the graphics clock controller found on SDM845 based devices. This would allow graphics drivers to probe and control their clocks. Signed-off-by: Amit Nischal <anischal@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> [sboyd@kernel.org: Collapse return in probe into less lines] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-21clk: qcom: Support 'protected-clocks' propertyStephen Boyd
Certain firmware configurations "protect" clks and cause the entire system to reboot when a non-secure OS such as Linux tries to read or write protected clk registers. But other firmware configurations allow reading or writing the same registers, and they may actually require that the OS use the otherwise locked down clks. Support the 'protected-clocks' property by never registering these protected clks with the common clk framework. This way, when firmware is protecting these clks we won't have the chance to ever read or write these registers and take down the entire system. Cc: Taniya Das <tdas@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-09clk: qcom: gcc: Fix board clock node nameVinod Koul
Device tree node name are not supposed to have "_" in them so fix the node name use of xo_board to xo-board Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404") Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-06clk: qcom: smd: Add support for QCS404 rpm clocksTaniya Das
Add rpm smd clocks, PMIC and bus clocks which are required on QCS404 for clients to vote on. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Anu Ramanathan <anur@codeaurora.org> [bjorn: Dropped cxo, voter clocks and static initialization] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-18Merge branches 'clk-fixed-rate-remove' and 'clk-qcom-cleanup' into clk-nextStephen Boyd
* clk-fixed-rate-remove: clk: fixed-rate: fix of_node_get-put imbalance * clk-qcom-cleanup: clk: qcom: Remove unused arrays in SDM845 GCC
2018-10-18Merge branches 'clk-imx6-mmdc', 'clk-qcom-krait', 'clk-rockchip' and ↵Stephen Boyd
'clk-smp2s11-match' into clk-next - iMX6 MMDC clks - Qualcomm Krait CPU clk support * clk-imx6-mmdc: clk: imx6q: add mmdc0 ipg clock clk: imx6sl: add mmdc ipg clocks clk: imx6sll: add mmdc1 ipg clock clk: imx6sx: add mmdc1 ipg clock clk: imx6ul: add mmdc1 ipg clock * clk-qcom-krait: clk: qcom: Add safe switch hook for krait mux clocks dt-bindings: clock: Document qcom,krait-cc clk: qcom: Add Krait clock controller driver dt-bindings: arm: Document qcom,kpss-gcc clk: qcom: Add KPSS ACC/GCC driver clk: qcom: Add support for Krait clocks clk: qcom: Add IPQ806X's HFPLLs clk: qcom: Add MSM8960/APQ8064's HFPLLs dt-bindings: clock: Document qcom,hfpll clk: qcom: Add HFPLL driver clk: qcom: Add support for High-Frequency PLLs (HFPLLs) ARM: Add Krait L2 register accessor functions * clk-rockchip: clk: rockchip: Fix static checker warning in rockchip_ddrclk_get_parent call clk: rockchip: use the newly added clock-id for hdmi on RK3066 clk: rockchip: add clock-id for HCLK_HDMI on rk3066 clk: rockchip: fix wrong mmc sample phase shift for rk3328 clk: rockchip: improve rk3288 pll rates for better hdmi output * clk-smp2s11-match: clk: s2mps11: Add used attribute to s2mps11_dt_match clk: s2mps11: Fix matching when built as module and DT node contains compatible
2018-10-18Merge branch 'clk-qcom-qcs404' into clk-nextStephen Boyd
- Qualcomm QCS404 GCC support * clk-qcom-qcs404: clk: qcom: gcc: Add global clock controller driver for QCS404 clk: qcom: Export clk_alpha_pll_configure()
2018-10-18Merge branch 'clk-qcom-sdm660' into clk-nextStephen Boyd
- Qualcomm SDM660 GCC support * clk-qcom-sdm660: clk: qcom: gcc-sdm660: Add MODULE_LICENSE clk: qcom: Add Global Clock controller (GCC) driver for SDM660
2018-10-18Merge branches 'clk-qcom-sdm845-camcc' and 'clk-mtk-unused' into clk-nextStephen Boyd
- Qualcomm SDM845 camera clock controller * clk-qcom-sdm845-camcc: clk: qcom: Add camera clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Camera clock bindings * clk-mtk-unused: clk: mediatek: remove unused array audio_parents
2018-10-18Merge branches 'clk-dt-name', 'clk-ti-of-node' and 'clk-sa' into clk-nextStephen Boyd
- Use updated printk format for OF node names - Fix TI code to only search DT subnodes - Various static analysis finds * clk-dt-name: clk: Convert to using %pOFn instead of device_node.name * clk-ti-of-node: clk: ti: fix OF child-node lookup * clk-sa: clk: mvebu: armada-37xx-tbg: Switch to clk_get and balance it in probe reset: hisilicon: fix potential NULL pointer dereference clk: cdce925: release child device nodes clk: qcom: clk-branch: Use true and false for boolean values
2018-10-18Merge branches 'clk-spdx', 'clk-qcom-dfs', 'clk-smp2s11-include', ↵Stephen Boyd
'clk-qcom-8996-missing' and 'clk-qcom-qspi' into clk-next - Tag various drivers with SPDX license tags - Support dynamic frequency switching (DFS) on qcom SDM845 GCC - Only use s2mps11 dt-binding defines instead of redefining them in the driver - Add some more missing clks to qcom MSM8996 GCC - Quad SPI clks on qcom SDM845 * clk-spdx: clk: mvebu: use SPDX-License-Identifier clk: renesas: Convert to SPDX identifiers clk: renesas: use SPDX identifier for Renesas drivers clk: s2mps11,s3c64xx: Add SPDX license identifiers clk: max77686: Add SPDX license identifiers * clk-qcom-dfs: clk: qcom: Allocate space for NULL terimation in DFS table clk: qcom: gcc: Register QUPv3 RCGs for DFS on SDM845 clk: qcom: Add support for RCG to register for DFS * clk-smp2s11-include: clk: s2mps11: Use existing defines from bindings for clock IDs * clk-qcom-8996-missing: clk: qcom: Add some missing gcc clks for msm8996 * clk-qcom-qspi: clk: qcom: Add qspi (Quad SPI) clocks for sdm845 clk: qcom: Add qspi (Quad SPI) clock defines for sdm845 to header
2018-10-18clk: qcom: Remove unused arrays in SDM845 GCCEvan Green
This change removes a parent map and parent name array that appear to be completely unreferenced. Signed-off-by: Evan Green <evgreen@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-18clk: qcom: gcc-sdm660: Add MODULE_LICENSEStephen Boyd
Add a module license to match the license at the top of this file and silence a build warning. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add safe switch hook for krait mux clocksSricharan R
When the Hfplls are reprogrammed during the rate change, the primary muxes which are sourced from the same hfpll for higher frequencies, needs to be switched to the 'safe secondary mux' as the parent for that small window. This is done by registering a clk notifier for the muxes and switching to the safe parent in the PRE_RATE_CHANGE notifier and back to the original parent in the POST_RATE_CHANGE notifier. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add Krait clock controller driverStephen Boyd
The Krait CPU clocks are made up of a primary mux and secondary mux for each CPU and the L2, controlled via cp15 accessors. For Kraits within KPSSv1 each secondary mux accepts a different aux source, but on KPSSv2 each secondary mux accepts the same aux source. Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add KPSS ACC/GCC driverStephen Boyd
The ACC and GCC regions present in KPSSv1 contain registers to control clocks and power to each Krait CPU and L2. For CPUfreq purposes probe these devices and expose a mux clock that chooses between PXO and PLL8. Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add support for Krait clocksStephen Boyd
The Krait clocks are made up of a series of muxes and a divider that choose between a fixed rate clock and dedicated HFPLLs for each CPU. Instead of using mmio accesses to remux parents, the Krait implementation exposes the remux control via cp15 registers. Support these clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> [sboyd@kernel.org: Move hidden config to top outside of the visible qcom config zone so that menuconfig looks nice] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add IPQ806X's HFPLLsStephen Boyd
Describe the HFPLLs present on IPQ806X devices. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add MSM8960/APQ8064's HFPLLsStephen Boyd
Describe the HFPLLs present on MSM8960 and APQ8064 devices. Acked-by: Rob Herring <robh@kernel.org> (bindings) Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add HFPLL driverStephen Boyd
On some devices (MSM8974 for example), the HFPLLs are instantiated within the Krait processor subsystem as separate register regions. Add a driver for these PLLs so that we can provide HFPLL clocks for use by the system. Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: qcom: Add support for High-Frequency PLLs (HFPLLs)Stephen Boyd
HFPLLs are the main frequency source for Krait CPU clocks. Add support for changing the rate of these PLLs. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16clk: qcom: gcc: Add global clock controller driver for QCS404Shefali Jain
Add the clocks supported in global clock controller which clock the peripherals like BLSPs, SDCC, USB, MDSS etc. Register all the clocks to the clock framework for the clients to be able to request for them. Signed-off-by: Shefali Jain <shefjain@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Co-developed-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Anu Ramanathan <anur@codeaurora.org> [bamse, vkoul: rebase and tidyup for upstream] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Acked-by: Rob Herring <robh@kernel.org> [sboyd@kernel.org: Lowercase hex] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16clk: qcom: Export clk_alpha_pll_configure()Bjorn Andersson
This is used by the QCS404 GCC driver, export it to allow that driver to be compiled as a module.. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16clk: qcom: Add Global Clock controller (GCC) driver for SDM660Taniya Das
Add support for the global clock controller found on SDM660 based devices. This should allow most non-multimedia device drivers to probe and control their clocks. Based on CAF implementation. Signed-off-by: Taniya Das <tdas@codeaurora.org> [craig: rename parents to fit upstream, and other cleanups] Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> Acked-by: Rob Herring <robh@kernel.org> [sboyd@kernel.org: Rename gcc_660 to gcc_sdm660 and fix numbering of defines to avoid duplicates] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-30clk: qcom: Add camera clock controller driver for SDM845Amit Nischal
Add support for the camera clock controller found on SDM845 based devices. This would allow camera drivers to probe and control their clocks. Signed-off-by: Amit Nischal <anischal@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-30clk: qcom: clk-branch: Use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-30clk: qcom: Allocate space for NULL terimation in DFS tableDouglas Anderson
The table allocated in clk_rcg2_dfs_populate_freq_table() is eventually iterated over by qcom_find_freq() which assumes that the table is NULL terminated. Allocate one extra space in the array for the NULL termination. Initting of the NULL termination is implicit due to kcalloc(). Fixes: cc4f6944d0e3 ("clk: qcom: Add support for RCG to register for DFS") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-02-01 07:35:48 +0000