summaryrefslogtreecommitdiff
path: root/drivers/clk/rockchip/clk.h
AgeCommit message (Collapse)Author
2019-09-05clk: rockchip: Add clock controller for the rk3308Finley Xiao
Add the clock tree definition for the new RK3308 SoC. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-07-17Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-06-14clk: rockchip: add a type from SGRF-controlled gate clocksHeiko Stuebner
Some clk gates on Rockchip SoCs are part of the SGRF (secure general register files) and thus only controllable from secure mode, with the most prominent example being the watchdog. In most cases we still want to define this as a real clock though, to have complete clock tree and not reference the generic base-clock from the devicetree. So far we've just defined this as factor-1-1 clocks in the clock init, so define a special clock-type for it so that this definition can be part of the general tree-definition and save some boilerplate code. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-12clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-typeFinley Xiao
The div offset of some clocks are different from their mux offset and the COMPOSITE clock-type require that div and mux offset are the same, so add a new COMPOSITE_DIV_OFFSET clock-type to handle that. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-06clk: rockchip: add clock controller for px30Elaine Zhang
Add the clock tree definition for the new px30 SoC. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-06clk: rockchip: add support for half dividerElaine Zhang
The new Rockchip socs have optional half divider: The formula is shown as: freq_out = 2*freq_in / (2*div + 3) Is this the same for all of new SoCs. So we use "branch_half_divider" + "COMPOSITE_NOMUX_HALFDIV \ DIV_HALF \ COMPOSITE_HALFDIV \ CMPOSITE_NOGATE_HALFDIV" to hook that special divider clock-type into our clock-tree. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-03-22clk: rockchip: rename RK1108 to RV1108Andy Yan
Rockchip finally named the SOC as RV1108, so change it. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [include rename in rk1108.dtsi to prevent compile errors] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-05clk: rockchip: add clock controller for rk3328Elaine Zhang
Add the clock tree definition for the new rk3328 SoC. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-02clk: rockchip: add new pll-type for rk3328Elaine Zhang
The rk3328's pll and clock are similar with rk3036's, it different with pll_mode_mask, the rk3328 soc pll mode only one bit(rk3036 soc have two bits) so these should be independent and separate from the series of rk3328s. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-02clk: rockchip: add a clock-type for muxes based in the grfHeiko Stuebner
Rockchip socs often have some tiny number of muxes not controlled from the core clock controller but through bits set in the general register files. Add a clock-type that can control these as well, so that we don't need to work around them being absent. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-16clk: rockchip: add clock controller for rk1108Shawn Lin
Add the clock tree definition and driver for rk1108 SoC. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Jacob Chen <jacob2.chen@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-09-01clk: rockchip: add new clock-type for the ddrclkLin Huang
Changing the rate of the DDR clock needs special care, as the DDR is of course in use and will react badly if the rate changes under it. Over time different approaches to handle that were used. Past SoCs like the rk3288 and before would store some code in SRAM while the rk3368 used a SCPI variant and let a coprocessor handle that. New rockchip platforms like the rk3399 have a dcf controller to do ddr frequency scaling, and support for this controller will be implemented in the arm-trusted-firmware. This new clock-type should over time handle all these methods for handling DDR rate changes, but right now it will concentrate on the SIP interface used to talk to ARM trusted firmware. The SIP interface counterpart was merged from pull-request #684 [0] into the upstream arm-trusted-firmware codebase. [0] https://github.com/ARM-software/arm-trusted-firmware/pull/684 Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-08clk: rockchip: use general clock flag when registering pllHeiko Stübner
Add the general flags the pll list already contains to the clock init, so that needed clock flags can be used for plls. Signed-off-by: Heiko Stübner <heiko@sntech.de>
2016-05-09clk: rockchip: simplify GRF handling in pll clocksHeiko Stuebner
With the previous commit, the clock drivers now know at init time if the GRF regmap is available. That means if it isn't available then, it also won't become available later and we can therefore switch PLLs, that need the GRF for the lock-status, to read-only mode - similar behaviour as the aborting of rate changes we did before. This saves some conditionals on every rate change and we can also drop the rockchip_clk_get_grf function completely. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-04-20clk: rockchip: fix checkpatch warning in core codeHeiko Stuebner
We seem to have accumulated a bunch of checkpatch warnings, with mainly overlong lines and two unnecessary allocation error messages. Most were introduced with the recent multi-controller-support but some were quite a bit older. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-04-19clk: rockchip: drop unnecessary header commentHeiko Stuebner
The internal clk header did contain a comment indicating that some of the defined registers were shared over multiple clock controller variants. In recent times, it was simply extended all the time and stopped providing any meaningful information, so drop it and it's overlong line. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-28clk: rockchip: add clock controller for the RK3399Xing Zheng
Add the clock tree definition for the new RK3399 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-27clk: rockchip: fix warning reported by kernel-docShawn Lin
./scripts/kernel-doc -man -v drivers/clk/rockchip/clk.h > /dev/null drivers/clk/rockchip/clk.h:133: warning: missing initial short description on line: * struct rockchip_clk_provider: information about clock provider drivers/clk/rockchip/clk.h:133: info: Scanning doc for struct drivers/clk/rockchip/clk.h:164: warning: missing initial short description on line: * struct rockchip_pll_clock: information about pll clock drivers/clk/rockchip/clk.h:164: info: Scanning doc for struct drivers/clk/rockchip/clk.h:194: warning: No description found for parameter 'parent_names' drivers/clk/rockchip/clk.h:194: warning: No description found for parameter 'num_parents' drivers/clk/rockchip/clk.h:194: warning: Excess struct/union/enum/typedef member 'parent_name' description in 'rockchip_pll_clock' drivers/clk/rockchip/clk.h:235: warning: missing initial short description on line: * struct rockchip_cpuclk_reg_data: describes register offsets and masks of the cpuclock Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-27clk: rockchip: remove mux_core_reg from rockchip_cpuclk_reg_dataShawn Lin
mux_core_reg isn't been used anywhere, let's remove it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-27clk: rockchip: add new pll-type for rk3399 and similar socsXing Zheng
The rk3399's pll and clock are similar with rk3036's, it different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-27clk: rockchip: Add support for multiple clock providersXing Zheng
There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-27clk: rockchip: allow varying mux parameters for cpuclk pll-sourcesXing Zheng
Thers are only two parent PLLs that APLL and GPLL for core on the previous SoCs (RK3066/RK3188/RK3288/RK3368). Hence, we set fixed GPLL as alternate parent when core is switching freq. Since RK3399 big.LITTLE architecture, we need to select and adapt more PLLs (ALPLL/ABPLL/DPLL/GPLL) sources. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-27clk: rockchip: add a COMPOSITE_FRACMUX_NOGATE typeXing Zheng
Because there are some frac clock mux nodes don't have a gate node on the RK3399. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-02-04clk: rockchip: add a factor clock typeHeiko Stuebner
Add a clock type for fixed factor clocks. This allows us to define fixed factor clocks where they appear in the clock hierarchy instead of in the init function. The additional factor_gate type, finally allows us to model some last parts of the clock tree correctly. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-01-02Merge branch 'clk-rockchip' into clk-nextMichael Turquette
2016-01-02clk: rockchip: fix section mismatches with new child-clocksHeiko Stübner
To model the muxes downstream of fractional dividers we introduced the child property, allowing to describe a direct child clock. The first implementation seems to cause section warnings, as the core clock-tree is marked as initdata while the data pointed to from the child element is not. While there may be some way to also set that missing property in the inline notation I didn't find it, so to actually fix the issue for now move the sub-definitions into separate declarations that can have their own __initdata properties. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-23Merge branch 'clk-rockchip' into clk-nextMichael Turquette
2015-12-23clk: rockchip: handle mux dependency of fractional dividersHeiko Stuebner
The fractional dividers of Rockchip SoCs contain an "auto-gating-feature" that requires the downstream mux to actually point to the fractional divider and the fractional divider gate to be enabled, for it to really accept changes to the divider ratio. The downstream muxes themselfs are not generic enough to include them directly into the fractional divider, as they have varying sources of parent clocks including not only clocks related to the fractional dividers but other clocks as well. To solve this, allow our clock branches to specify direct child clock- branches in the new child property, let the fractional divider register its downstream mux through this and add a clock notifier that temporarily switches the mux setting when it notices rate changes to the fractional divider. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-12-21clk: rockchip: only enter pll slow-mode directly before reboots on rk3288Heiko Stuebner
As commit 1d33929e2a2b ("clk: rockchip: switch PLLs to slow mode before reboot for rk3288") states, switching the PLLs to slow-mode is only necessary when rebooting using the soft-reset done through the CRU. The dwc2 controllers used create really big number of interrupts in special constellations involving usb-hubs and their number is so high, it can even overwhelm the interrupt handler if the cpu-speed os to low. Right now the PLLs are put into slow-mode in a shutdown syscore_ops callback which means it happens on all reboots (not only the soft-reset ones) and even on poweroff actions. This can result in the system not powering off and getting stuck instead, so we should move the slow-mode change nearer to the actual reboot action. For this we introduce the possiblity to also set a callback that gets called from the restart-handler directly prior to restarting the system and move the shutdown-callback to this new option. With this the slow-mode switch is done only on the necessary reboots and also has a smaller possibility of causing artifacts. Fixes: 1d33929e2a2b ("clk: rockchip: switch PLLs to slow mode before reboot for rk3288") Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2015-12-12clk: rockchip: add clock controller for rk3228Jeffy Chen
Add the clock tree definition for the new rk3228 SoC. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-23clk: rockchip: add clock controller for rk3036Xing Zheng
Add the clock tree definition for the new rk3036 SoC. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-23clk: rockchip: add new pll-type for rk3036 and similar socsXing Zheng
The rk3036's pll and clock are different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-07-28clk: rockchip: Fix PLL bandwidthDouglas Anderson
In the TRM we see that BWADJ is "a 12-bit bus that selects the values 1-4096 for the bandwidth divider (NB)": NB = BWADJ[11:0] + 1 The recommended setting of NB: NB = NF / 2. So: NB = NF / 2 BWADJ[11:0] + 1 = NF / 2 BWADJ[11:0] = NF / 2 - 1 Right now, we have: { \ .rate = _rate##U, \ .nr = _nr, \ .nf = _nf, \ .no = _no, \ .bwadj = (_nf >> 1), \ } That means we set bwadj to NF / 2, not NF / 2 - 1 All of this is a bit confusing because we specify "NR" (the 1-based value), "NF" (the 1-based value), "NO" (the 1-based value), but "BWADJ" (the 0-based value) instead of "NB" (the 1-based value). Let's change to working with "NB" and fix the off by one error. This may affect PLL jitter in a small way (hopefully for the better). Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28Merge branch 'cleanup-clk-h-includes' into clk-nextStephen Boyd
* cleanup-clk-h-includes: (62 commits) clk: Remove clk.h from clk-provider.h clk: h8300: Remove clk.h and clkdev.h includes clk: at91: Include clk.h and slab.h clk: ti: Switch clk-provider.h include to clk.h clk: pistachio: Include clk.h clk: ingenic: Include clk.h clk: si570: Include clk.h clk: moxart: Include clk.h clk: cdce925: Include clk.h clk: Include clk.h in clk.c clk: zynq: Include clk.h clk: ti: Include clk.h clk: sunxi: Include clk.h and remove unused clkdev.h includes clk: st: Include clk.h clk: qcom: Include clk.h clk: highbank: Include clk.h clk: bcm: Include clk.h clk: versatile: Remove clk.h and clkdev.h includes clk: ux500: Remove clk.h and clkdev.h includes clk: tegra: Properly include clk.h ...
2015-07-20clk: rockchip: Properly include clk.hStephen Boyd
Clock provider drivers generally shouldn't include clk.h because it's the consumer API. Only include clk.h if it's actually used. Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06clk: rockchip: add rk3368 clock controllerHeiko Stuebner
Describe the clock tree and software resets of the rk3368 ARM64 SoC Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06clk: rockchip: add support for phase invertersHeiko Stuebner
Most Rockchip socs have optional phase inverters connected to some clocks that move the clock-phase by 180 degrees. Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Dropped lazy part of commit text] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06clk: rockchip: add COMPOSITE_NOGATE_DIVTBL variantHeiko Stuebner
A clock branch consisting of a mux and divider with non-standard divider values. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06clk: rockchip: protect register macros against multipart valuesHeiko Stuebner
The macros calculate the correct offset from the id in the parameter. If this parameter does not consist of a single number, the calculation will return wrong registers in the best case or create unaligned accesses in the worst case. So protect the calculations against such values. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04clk: make several parent names constUwe Kleine-König
Since commit 2893c379461a ("clk: make strings in parent name arrays const") the name of parent clocks can be const. So add more const in several clock drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-12clk: don't use __initconst for non-const arraysUwe Kleine-König
The statement static const char *name[]; defines a modifiable array of pointers to constant chars. That is *name[0] = 'f'; is forbidden, but name[0] = "f"; is not. So marking an array that is defined as above with __initconst is wrong. Either an additional const must be added such that the whole definition reads: static const char *const name[] __initconst; or where this is not possible __initdata must be used. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-11-28clk: rockchip: Add support for the mmc clock phases using the frameworkAlexandru M Stan
This patch adds the 2 physical clocks for the mmc (drive and sample). They're mostly there for the phase properties, but they also show the true clock (by dividing by RK3288_MMC_CLKGEN_DIV). The drive and sample phases are generated by dividing an upstream parent clock by 2, this allows us to adjust the phase by 90 deg. There's also an option to have up to 255 delay elements (40-80 picoseconds long). This driver uses those elements (under the assumption that they're 60 ps long) to generate approximate 22.5 degrees options. 67.5 (22.5*3) might be as high as 90 deg if the delay elements are as big as 80 ps, so a finer division (smaller than 22.5) was not picked because the phase might not be monotonic anymore. Suggested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-25clk: rockchip: add optional sync to pll rate parametersHeiko Stuebner
In some cases firmware brings up plls with different parameters than the ones noted in the rate table for the specific frequency. These firmware-selected parameters are worse than the tested ones in the pll rate tables but cannot be changed by a simple clk_set_rate call when the rate stays the same. Therefore add a ROCKCHIP_PLL_SYNC_RATE flag and implement an init callback that checks the runtime-parameters against the matching rate table entry and adjusts them to the table-ones if necessary. If no rate table is set or the current rate does not match any rate-table entry no changes are made. Being able to limit this adjustment to specific plls is necessary to not touch the ones supplying core components like the apll and dpll supplying the armcores and dram. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-25clk: rockchip: add ability to specify pll-specific flagsHeiko Stuebner
This adds a flag parameter to plls that allows us to create special flags to tweak the behaviour of the plls if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-10-29clk: rockchip: change PLL setting for better clock jitterKever Yang
dclk_vop0/1 is the source of HDMI TMDS clock in rk3288, usually we use 594MHz for clock source of dclk_vop0/1. HDMI CTS 7-9 require TMDS Clock jitter is lower than 0.25*Tbit: TMDS clock(MHz) CTS require jitter (ps) 297 84.2 148.5 168 74.25 336 27 1247 PLL BW and VCO frequency effects the jitter of PLL output clock, clock jitter is better if BW is lower or VCO frequency is higher. If PLL use default setting of RK3066_PLL_RATE( 594000000, 2, 198, 4), the TMDS Clock jitter is higher than 250ps, which means we can't pass the test when TMDS clock is 297MHz or 148.5MHz. If we use RK3066_PLL_RATE_BWADJ(594000000, 1, 198, 8, 1), the TMDS Clock jitter is about 60ps and we can pass all test case. So we need this patch to make hdmi si test pass. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-10-01clk: rockchip: add restart handlerHeiko Stübner
Add infrastructure to write the correct value to the restart register and register the restart notifier for both rk3188 (including rk3066) and rk3288. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-09-27clk: rockchip: add new clock-type for the cpuclkHeiko Stuebner
When changing the armclk on Rockchip SoCs it is supposed to be reparented to an alternate parent before changing the underlying pll and back after the change. Additionally there exist clocks that are very tightly bound to the armclk whose divider values are set according to the armclk rate. Add a special clock-type to handle all that. The rate table and divider values will be supplied from the soc-specific clock controllers. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> On a rk3288-board: Tested-by: Doug Anderson <dianders@chromium.org>
2014-09-02clk: rockchip: protect critical clocks from getting disabledHeiko Stübner
The clock-tree contains clocks that should never get disabled automatically. One example are the base ACLKs, the base supplies for all peripherals. Therefore add a structure similar to the sunxi clock-tree to protect these special clocks from being disabled. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Doug Anderson <dianders@chromium.org> Tested-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-13clk: rockchip: add clock controller for rk3288Heiko Stübner
Add the clock tree definition for the new rk3288 SoC. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-12 16:49:33 +0000