summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC device tree conversions from Arnd Bergmann: "These are device tree conversions for a number of platforms, with the intention of turning code from board files into device tree descriptions. Notable changes are: - davinci bindings for pinctrl, MTD, RTC, watchdog and i2c - nomadik bindings for all devices, removing the board files - bcm2835 bindings for mmc and i2c - tegra bindings for hdmi, keyboard, audio, as well as some updates - at91 bindings for hardware ecc and for devices on RM9200 - mxs bindings for cfa100xx - sunxi support for Miniand Hackberry board" * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits) Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree" Revert "sunxi: a13-olinuxino: Add user LED to the device tree" clk: tegra: initialise parent of uart clocks ARM: tegra: remove clock-frequency properties from serial nodes clk: tegra: fix driver to match DT binding clk: tegra: local arrays should be static clk: tegra: Add missing spinlock for hclk and pclk clk: tegra: Implement locking for super clock clk: tegra: fix wrong clock index between se to sata_cold sunxi: a13-olinuxino: Add user LED to the device tree ARM: davinci: da850 DT: add support for machine reboot ARM: davinci: da850: add wdt DT node ARM: davinci: da850: add DT node for I2C0 ARM: at91: at91sam9n12: add DT parameters to enable PMECC ARM: at91: at91sam9x5: add DT parameters to enable PMECC ARM: at91: add EMAC bindings to RM9200 DT ARM: at91: add SSC bindings to RM9200 DT ARM: at91: add MMC bindings to RM9200 DT ARM: at91: Animeo IP: enable watchdog support ARM: nomadik: fix OF compilation regression ...
2013-02-21Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
2013-02-21Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC driver specific changes from Arnd Bergmann: - Updates to the ux500 cpufreq code - Moving the u300 DMA controller driver to drivers/dma - Moving versatile express drivers out of arch/arm for sharing with arch/arm64 - Device tree bindings for the OMAP General Purpose Memory Controller * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: OMAP2+: gpmc: Add device tree documentation for elm handle ARM: OMAP2+: gpmc: add DT bindings for OneNAND ARM: OMAP2+: gpmc-onenand: drop __init annotation mtd: omap-onenand: pass device_node in platform data ARM: OMAP2+: Prevent potential crash if GPMC probe fails ARM: OMAP2+: gpmc: Remove unneeded of_node_put() arm: Move sp810.h to include/linux/amba/ ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs ARM: OMAP: gpmc-nand: drop __init annotation mtd: omap-nand: pass device_node in platform data ARM: OMAP: gpmc: don't create devices from initcall on DT dma: coh901318: cut down on platform data abstraction dma: coh901318: merge header files dma: coh901318: push definitions into driver dma: coh901318: push header down into the DMA subsystem dma: coh901318: skip hard-coded addresses dma: coh901318: remove hardcoded target addresses dma: coh901318: push platform data into driver dma: coh901318: create a proper platform data file ...
2013-02-20Merge tag 'pm+acpi-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: - Rework of the ACPI namespace scanning code from Rafael J. Wysocki with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg, Toshi Kani, and Yinghai Lu. - ACPI power resources handling and ACPI device PM update from Rafael J Wysocki. - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner. - Support for Intel Lynxpoint LPSS from Mika Westerberg. - cpuidle update from Len Brown including Intel Haswell support, C1 state for intel_idle, removal of global pm_idle. - cpuidle fixes and cleanups from Daniel Lezcano. - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with contributions from Stratos Karafotis and Rickard Andersson. - Intel P-states driver for Sandy Bridge processors from Dirk Brandewie. - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn. - cpufreq fixes related to ordering issues between acpi-cpufreq and powernow-k8 from Borislav Petkov and Matthew Garrett. - cpufreq support for Calxeda Highbank processors from Mark Langsdorf and Rob Herring. - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update from Shawn Guo. - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat, and Inderpal Singh. - Support for "lightweight suspend" from Zhang Rui. - Removal of the deprecated power trace API from Paul Gortmaker. - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki Ishimatsu. * tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle cpufreq / intel_pstate: Add kernel command line option disable intel_pstate. cpufreq / intel_pstate: Change to disallow module build tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E ACPI / hotplug: Fix concurrency issues and memory leaks ...
2013-02-20Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull clock framework update from Michael Turquette: "The common clock framework changes for 3.9 are almost entirely fixes. None are dire enough to be Cc'd to stable which may be interpreted to mean that users of the framework are reaching stability. Lots of new adoption of this framework is via DeviceTree data and that comes through the respective architecture and platform trees instead of through the clk framework tree. Two new features are improved debugfs output and an improvement to how DT clocks are initialized by reusing a common method." * tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (25 commits) clk: sunxi: remove stale Makefile entry clk: vexpress: Use common of_clk_init() function clk: zynq: Use common of_clk_init() function clk: vt8500: Use common of_clk_init() function clk: highbank: Use common of_clk_init() function clk: sunxi: Use common of_clk_init() function clk: add common of_clk_init() function clk: Deduplicate exit code in clk_set_rate clk: beautify Makefile clk-divider: fix macros clk: prima2: enable dt-binding clkdev mapping clk: mxs: Index is always positive clk: max77686: Avoid double free at remove time clk: remove exported function from __init section clk: vt8500: Add support for WM8750/WM8850 PLL clocks clk: vt8500: Fix division-by-0 when requested rate=0 clk: vt8500: Fix device clock divisor calculations clk: vt8500: Fix error in PLL calculations on non-exact match. clk: max77686: Remove unnecessary NULL checking for container_of() clk: JSON debugfs clock tree summary ...
2013-02-19Merge tag 'tegra-for-3.9-soc-ccf-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/dt ARM: tegra: common clock framework fixes A number of small fixes are included to the new Tegra common clock driver. These are: Missing locking, definition of device tree clock IDs not matching the binding, a static cleanup, missing initialization of some UART clocks. This branch is based on Tegra's previous pull request tegra-for-3.9-dt. This dependency is caused by the one patch that edits the device tree. If this causes a problem, I can drop the final two patches in this pull request for now, and rebase it onto previous tegra-for-3.9-soc-ccf instead. * tag 'tegra-for-3.9-soc-ccf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: clk: tegra: initialise parent of uart clocks ARM: tegra: remove clock-frequency properties from serial nodes clk: tegra: fix driver to match DT binding clk: tegra: local arrays should be static clk: tegra: Add missing spinlock for hclk and pclk clk: tegra: Implement locking for super clock clk: tegra: fix wrong clock index between se to sata_cold (applied to next/dt branch rather than next/soc because of the dependency) Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-15Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (55 commits) cpufreq / intel_pstate: Fix 32 bit build cpufreq: conservative: Fix typos in comments cpufreq: ondemand: Fix typos in comments cpufreq: exynos: simplify .init() for setting policy->cpus cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs cpufreq/x86: Add P-state driver for sandy bridge. cpufreq_stats: do not remove sysfs files if frequency table is not present cpufreq: Do not track governor name for scaling drivers with internal governors. cpufreq: Only call cpufreq_out_of_sync() for driver that implement cpufreq_driver.target() cpufreq: Retrieve current frequency from scaling drivers with internal governors cpufreq: Fix locking issues cpufreq: Create a macro for unlock_policy_rwsem{read,write} cpufreq: Remove unused HOTPLUG_CPU code cpufreq: governors: Fix WARN_ON() for multi-policy platforms cpufreq: ondemand: Replace down_differential tuner with adj_up_threshold cpufreq / stats: Get rid of CPUFREQ_STATDEVICE_ATTR cpufreq: Don't check cpu_online(policy->cpu) cpufreq: add imx6q-cpufreq driver cpufreq: Don't remove sysfs link for policy->cpu cpufreq: Remove unnecessary use of policy->shared_type ...
2013-02-14clk: sunxi: remove stale Makefile entryArnd Bergmann
Patch 85a18198 "clk: sunxi: Use common of_clk_init() function" removed the clk-sunxi.c file but left the Makefile entry, which causes a build error in multi_v7_defconfig: make[4]: *** No rule to make target `drivers/clk/clk-sunxi.o', needed by `drivers/clk/built-in.o'. The obvious fix is to remove the extraneous line from the Makefile. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Maxime Ripard <maxime.ripard@anandra.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-02-13clk: tegra: initialise parent of uart clocksLaxman Dewangan
Initialise the parent of UARTs to PLLP and disabling clock by default. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13clk: tegra: fix driver to match DT bindingStephen Warren
enum tegra*_clk is intended to match the IDs listed in the Tegra clock bindings. There are a few mismatches, which this patch fixes: 1) pll_s and cop were left out of the Tegra20 enum. 2) spdif_in and spdif_out were swapped relative to the Tegra30 binding. 3) i2cslow was misnamed as i2c_slow, and a duplicate i2cslow clock added to the Tegra30 enum. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-02-12clk: tegra: local arrays should be staticPeter De Schrijver
cclk_g_parents, cclk_lp_parents and sclk_parents are only accessed from within clk-tegra30.c. Declare them static to avoid namespace polution. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12clk: tegra: Add missing spinlock for hclk and pclkPeter De Schrijver
The hclk and pclk clocks are controlled by the same register. Hence a lock is required to avoid corruption. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12clk: tegra: Implement locking for super clockPeter De Schrijver
Although tegra_clk_register_super_mux() has a lock parameter, the lock is not actually used by the code. Fixed with this patch. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-12clk: tegra: fix wrong clock index between se to sata_coldJoseph Lo
The index of se should be 127. And the previous clock index was 125. So we need to set up the index for se to get the correct index between se to sata_cold. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-11Merge branch 'acpi-lpss'Rafael J. Wysocki
* acpi-lpss: ACPI / platform: create LPSS clocks if Lynxpoint devices are found during scan clk: x86: add support for Lynxpoint LPSS clocks x86: add support for Intel Low Power Subsystem ACPI / platform: fix comment about the platform device name ACPI: add support for CSRT table
2013-02-09Merge tag 'mxs-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into next/soc From Shawn Guo: mxs soc changes for 3.9 - A couple of optimization on timer - Some updates on mxs_defconfig * tag 'mxs-soc-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ARM: mxs: Update mxs_defconfig
2013-02-09cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCsAndrew Lunn
The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-05Merge tag 'tegra-for-3.9-soc-cpuidle' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc From Stephen Warren: ARM: tegra: cpuidle enhancements This pull request implements a new "LP2" cpuidle state for Tegra20, which makes use of the couple cpuidle feature. It is based on (most of) the previous pull request, with tag tegra-for-3.9-soc-usb. * tag 'tegra-for-3.9-soc-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra20: cpuidle: apply coupled cpuidle for powered-down mode ARM: tegra20: flowctrl: add support for cpu_suspend_enter/exit clk: tegra20: Implementing CPU low-power function for tegra_cpu_car_ops ARM: tegra20: cpuidle: add powered-down state for secondary CPU ARM: tegra: add pending SGI checking API Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-05Merge tag 'tegra-for-3.9-soc-ccf' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc From Stephen Warren: ARM: tegra: Common Clock Framework rework Tegra already supports the common clock framework, but had issues: 1) The clock driver was located in arch/arm/mach-tegra/ rather than drivers/clk/. 2) A single "Tegra clock" type was implemented, rather than separate clock types for PLL, mux, divider, ... type in HW. 3) Clock lookups by device drivers were still driven by device name and connection ID, rather than through device tree. This pull request solves all three issues. This required some DT changes to add clocks properties, and driver changes to request clocks more "correctly". Finally, this rework allows all AUXDATA to be removed from Tegra board files, and various duplicate clock lookup entries to be removed from the driver. This pull request is based on the previous pull request, with tag tegra-for-3.9-cleanup. * tag 'tegra-for-3.9-soc-ccf' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (31 commits) clk: tegra30: remove unused TEGRA_CLK_DUPLICATE()s clk: tegra20: remove unused TEGRA_CLK_DUPLICATE()s ARM: tegra30: remove auxdata ARM: tegra20: remove auxdata ASoC: tegra: remove auxdata staging: nvec: remove use of clk_get_sys ARM: tegra: paz00: add clock information to DT ARM: tegra: add clock properties to Tegra30 DT ARM: tegra: add clock properties to Tegra20 DT spi: tegra: do not use clock name to get clock ARM: tegra: remove legacy clock code ARM: tegra: migrate to new clock code clk: tegra: add clock support for Tegra30 clk: tegra: add clock support for Tegra20 clk: tegra: add Tegra specific clocks ARM: tegra: define Tegra30 CAR binding ARM: tegra: define Tegra20 CAR binding ARM: tegra: move tegra_cpu_car.h to linux/clk/tegra.h ARM: tegra: add function to read chipid ARM: tegra: fix compile error when disable CPU_IDLE ... Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-tegra/board-dt-tegra20.c arch/arm/mach-tegra/board-dt-tegra30.c arch/arm/mach-tegra/common.c arch/arm/mach-tegra/platsmp.c drivers/clocksource/Makefile
2013-02-04Merge tag 'v3.8-rc6' into next/socOlof Johansson
Linux 3.8-rc6
2013-02-05ARM: mxs: use apbx bus clock to drive the timers on timrotv2Torben Hohn
timer resolution of ~32us is pretty low. v2 has 32bits resolution, so we have quite some headroom, and can use the 24MHz clock. v1 has only 16bits, so we only increase v2. So we just exchange the timrot clock in imx28. On imx23 we have timrotv1 and everything stays the same. Signed-off-by: Torben Hohn <torbenh@linutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-02clk / highbank: Prevent glitches in non-bypass reset modeMark Langsdorf
The highbank clock will glitch with the current code if the clock rate is reset without relocking the PLL. Program the PLL correctly to prevent glitches. Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-30arm: Move sp810.h to include/linux/amba/Catalin Marinas
Since it is now used by code under drivers/clk/ it makes sense for this file to be in a more generic location. This is required for building vexpress support on arm64. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2013-01-28clk: tegra20: Implementing CPU low-power function for tegra_cpu_car_opsJoseph Lo
Implementing suspend, resume and rail_off_ready API for tegra_cpu_car_ops. These functions were used for CPU powered-down state maintenance. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28clk: tegra30: remove unused TEGRA_CLK_DUPLICATE()sPrashant Gaikwad
With device tree support added for Tegra clocks look up is done from device tree, remove unused TEGRA_CLK_DUPLICATE()s. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28clk: tegra20: remove unused TEGRA_CLK_DUPLICATE()sPrashant Gaikwad
With device tree support added for Tegra clocks look up is done from device tree, remove unused TEGRA_CLK_DUPLICATE()s. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28ARM: tegra: migrate to new clock codePrashant Gaikwad
Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28clk: tegra: add clock support for Tegra30Prashant Gaikwad
Add Tegra30 clock support based on common clock framework. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: ensure all OF lookups return valid cookies i.e. an explicit error pointer or valid pointer not NULL, adapt to renames in earlier patches, fixed some checkpatch issues.] Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28clk: tegra: add clock support for Tegra20Prashant Gaikwad
Add Tegra20 clock support based on common clock framework. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: s/1GHz/100MHz/ in call to tegra_clk_plle() to fix PCIe, implemented KBC clock, ensure all OF lookups return valid cookies i.e. an explicit error pointer or valid pointer not NULL, adapt to renames in earlier patches, fixed some checkpatch issues.] Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28clk: tegra: add Tegra specific clocksPrashant Gaikwad
Add Tegra specific clocks, pll, pll_out, peripheral, frac_divider, super. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: alloc sizeof(*foo) not sizeof(struct foo), add comments re: storing pointers to stack variables, make a timeout loop more idiomatic, use _clk_pll_disable() not clk_disable_pll() from _program_pll() to avoid redundant lock operations, unified tegra_clk_periph() and tegra_clk_periph_nodiv(), unified tegra_clk_pll{,e}, rename all clock registration functions so they don't have the same name as the clock structs, return -EINVAL from clk_plle_enable when matching table rate not found, pass ops to _tegra_clk_register_pll rather than a bool.] Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-24clk: vexpress: Use common of_clk_init() functionPrashant Gaikwad
Use common of_clk_init() function for clock initialization. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Tested-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-24clk: zynq: Use common of_clk_init() functionPrashant Gaikwad
Use common of_clk_init() function for clock initialization. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Reviewed-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-24clk: vt8500: Use common of_clk_init() functionPrashant Gaikwad
Use common of_clk_init() function for clock initialization. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Tested-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: added entry for wm8750-pll-clock] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-24clk: highbank: Use common of_clk_init() functionPrashant Gaikwad
Use common of_clk_init() function for clocks initialization. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Tested-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-24clk: sunxi: Use common of_clk_init() functionPrashant Gaikwad
Use common of_clk_init() function to initialize clocks. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Maxime Ripard <maxime.ripard@anandra.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-24clk: add common of_clk_init() functionPrashant Gaikwad
Modify of_clk_init function so that it will determine which driver to initialize based on device tree instead of each driver registering to it. Based on a similar patch for drivers/irqchip by Thomas Petazzoni and drivers/clocksource by Stephen Warren. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Tested-by: Tony Prisk <linux@prisktech.co.nz> Tested-by: Pawel Moll <pawel.moll@arm.com> Tested-by: Rob Herring <rob.herring@calxeda.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com> Reviewed-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Maxime Ripard <maxime.ripard@anandra.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: merge conflict from missing CLKSRC_OF_TABLES()] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-23Merge tag 'mvebu_fixes_for_v3.8-rc5' of ↵Olof Johansson
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: mvebu fixes for v3.8-rc5 - fix memory leak in mvebu/clk-cpu.c - use devm_ to correct/simplify error paths in mvsdio - add missing #interrupt-cells property in kirkwood * tag 'mvebu_fixes_for_v3.8-rc5' of git://git.infradead.org/users/jcooper/linux: ARM: kirkwood: fix missing #interrupt-cells property mmc: mvsdio: use devm_ API to simplify/correct error paths. clk: mvebu/clk-cpu.c: fix memory leakage
2013-01-23clk: x86: add support for Lynxpoint LPSS clocksMika Westerberg
Intel Lynxpoint Low Power Subsystem hosts peripherals like UART, I2C and SPI controllers. For most of these there is a configuration register that allows software to enable and disable the functional clock. Disabling the clock while the peripheral is not used saves power. In order to take advantage of this we add a new clock gate of type lpss_gate that just re-uses the ordinary clk_gate but in addition is able to enumerate the base address register of the device using ACPI. We then create a clock tree that models the Lynxpoint LPSS clocks using these gates and fixed clocks so that we can pass clock rate to the drivers as well. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-23clk: mvebu/clk-cpu.c: fix memory leakageCong Ding
the variable cpuclk and clk_name should be properly freed when error happens. Signed-off-by: Cong Ding <dinggnu@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-21clk: Deduplicate exit code in clk_set_rateNestor Ovroy
On non-out case 'return ret;' is equivalent to 'return 0;' as the ret variable is initialized at 0 and never changed. Signed-off-by: Nestor Ovroy <novroy@riseup.net>
2013-01-18clk: beautify MakefileMike Turquette
The list of common clock types was getting a bit unmanageable. This patch puts only one file on each line and reorders the object files alphabetically. Also a newline is added to separate the sections. Reported-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-18clk-divider: fix macrosJames Hogan
The macro is_power_of_two() in clk-divider.c was defined as !(i & ~i) which is always true. Instead use is_power_of_2() from log2.h. Also add brackets around the macro arguments in div_mask to avoid any future operator precedence problems. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: use log2.h per Joe Perches; update changelog]
2013-01-18clk: prima2: enable dt-binding clkdev mappingBarry Song
this patche deletes hard code that registers clkdev by things like: clk_register_clkdev(clk, NULL, "b0030000.nand"); clk_register_clkdev(clk, NULL, "b0040000.audio"); clk_register_clkdev(clk, NULL, "b0080000.usp"); prima2 clock controller becomes a clock provider and every dt node just declares its clock sources by dt prop. it also makes us easier to extend this driver to support both prima2 and marco as marco has different address mapping with prima2. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-15clk: mxs: Index is always positiveFabio Estevam
Fix the following warnings when building with W=1 option: drivers/clk/mxs/clk-imx23.c: In function 'mx23_clocks_init': drivers/clk/mxs/clk-imx23.c:149:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/clk/mxs/clk-imx23.c:165:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] ... drivers/clk/mxs/clk-imx28.c: In function 'mx28_clocks_init': drivers/clk/mxs/clk-imx28.c:227:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/clk/mxs/clk-imx28.c:244:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-15clk: max77686: Avoid double free at remove timeLaurent Pinchart
The clk_lookup entry is dropped at remove time by a call to clkdev_drop(). That function frees the entry, which is also freed by the driver core as it has been allocated through devm_kzalloc(). This results in a double free. Use kzalloc() instead of devm_kzalloc() to fix this. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-15clk: remove exported function from __init sectionDenis Efremov
The symbol of_fixed_clk_setup is exported and annotated __init. This looks like section mismatch. Fix this by removing the __init annotation of of_fixed_clk_setup. Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-15clk: vt8500: Add support for WM8750/WM8850 PLL clocksTony Prisk
This patch adds support for the new PLL module found in WM8750 and WM8850 SoCs. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-15clk: vt8500: Fix division-by-0 when requested rate=0Tony Prisk
A request to vt8500_dclk_(round_rate/set_rate) with rate=0 results in a division-by-0 in the kernel. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-15clk: vt8500: Fix device clock divisor calculationsTony Prisk
When calculating device clock divisor values in set_rate and round_rate, we do a simple integer divide. If parent_rate / rate has a fraction, this is dropped which results in the device clock being set too high. This patch corrects the problem by adding 1 to the calculated divisor if the division would have had a decimal result. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Mike Turquette <mturquette@linaro.org>