summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
AgeCommit message (Collapse)Author
2011-10-03drivers/cpufreq/pcc-cpufreq.c: avoid NULL pointer dereferenceNaga Chumbalkar
commit e71f5cc402ecb42b407ae52add7b173bf1c53daa upstream. per_cpu(processors, n) can be NULL, resulting in: Loading CPUFreq modules[ 437.661360] BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0434314>] pcc_cpufreq_cpu_init+0x74/0x220 [pcc_cpufreq] It's better to avoid the oops by failing the driver, and allowing the system to boot. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-10[CPUFREQ] fix cpumask memory leak in acpi-cpufreq on cpu hotplug.Luming Yu
I came across a memory leak during a cyclic cpu-online-offline test. Signed-off-by: Yu Luming <luming.yu@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2011-06-16[CPUFREQ] powernow-k8: Don't try to transition if the pstate is incorrectKonrad Rzeszutek Wilk
This patch augments the pstate transition code to error out (instead of returning 0) when an incorrect pstate is provided. Suggested-by: Borislav Petkov <bp@alien8.de> CC: andre.przywara@amd.com CC: Mark.Langsdorf@amd.com Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Jones <davej@redhat.com>
2011-06-16[CPUFREQ] powernow-k8: Don't notify of successful transition if we failed ↵Konrad Rzeszutek Wilk
(vid case). Before this patch if we failed the vid transition would still try to submit the "new" frequencies to cpufreq. That is incorrect - also we could submit a non-existing frequency value which would cause cpufreq to crash. The ultimate fix is in cpufreq to deal with incorrect values, but this patch improves the error recovery in the AMD powernowk8 driver. The failure that was reported was as follows: powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0x2 (1000 MHz), vid 0x12 powernow-k8: fid 0xa (1800 MHz), vid 0xa powernow-k8: fid 0xc (2000 MHz), vid 0x8 powernow-k8: fid 0xe (2200 MHz), vid 0x8 Marking TSC unstable due to cpufreq changes powernow-k8: fid trans failed, fid 0x2, curr 0x0 BUG: unable to handle kernel paging request at ffff880807e07b78 IP: [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5b ... And transition fails and data->currfid ends up with 0. Since the machine does not support 800Mhz value when the calculation is done ('find_khz_freq_from_fid(data->currfid);') it reports the new frequency as 800000 which is bogus. This patch fixes the issue during target setting. The patch however does not fix the issue in 'powernowk8_cpu_init' where the pol->cur can also be set with the 800000 value: pol->cur = find_khz_freq_from_fid(data->currfid); dprintk("policy current frequency %d kHz\n", pol->cur); /* min/max the cpu is capable of */ if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) { The fix for that looks to update cpufreq_frequency_table_cpuinfo to check pol->cur.... but that would cause an regression in how the acpi-cpufreq driver works (it sets cpu->cur after calling cpufreq_frequency_table_cpuinfo). Instead the fix will be to let cpufreq gracefully handle bogus data (another patch). Acked-by: Borislav Petkov <bp@alien8.de> CC: andre.przywara@amd.com CC: Mark.Langsdorf@amd.com Reported-by: Tobias Diedrich <ranma+xen@tdiedrich.de> Tested-by: Tobias Diedrich <ranma+xen@tdiedrich.de> [v1: Rebased on v3.0-rc2, reduced patch to deal with vid case] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Jones <davej@redhat.com>
2011-06-16[CPUFREQ] Don't set stat->last_index to -1 if the pol->cur has incorrect value.Konrad Rzeszutek Wilk
If the driver submitted an non-existing pol>cur value (say it used the default initialized value of zero), when the cpufreq stats tries to setup its initial values it incorrectly sets stat->last_index to -1 (or 0xfffff...). And cpufreq_stats_update tries to update at that index location and fails. This can be caused by: stat->last_index = freq_table_get_index(stat, policy->cur); not finding the appropiate frequency in the table (b/c the policy->cur is wrong) and we end up crashing. The fix however is concentrated in the 'cpufreq_stats_update' as the last_index (and old_index) are updated there. Which means it can reset the last_index to -1 again and on the next iteration cause a crash. Without this patch, the following crash is observed: powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0x2 (1000 MHz), vid 0x12 powernow-k8: fid 0xa (1800 MHz), vid 0xa powernow-k8: fid 0xc (2000 MHz), vid 0x8 powernow-k8: fid 0xe (2200 MHz), vid 0x8 Marking TSC unstable due to cpufreq changes powernow-k8: fid trans failed, fid 0x2, curr 0x0 BUG: unable to handle kernel paging request at ffff880807e07b78 IP: [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5b .. snip.. Pid: 1, comm: swapper Not tainted 3.0.0-rc2 #45 MICRO-STAR INTERNATIONAL CO., LTD MS-7094/MS-7094 ..snip.. Call Trace: [<ffffffff81479248>] cpufreq_stat_notifier_trans+0x48/0x7c [<ffffffff81095d68>] notifier_call_chain+0x32/0x5e [<ffffffff81095e6b>] __srcu_notifier_call_chain+0x47/0x63 [<ffffffff81095e96>] srcu_notifier_call_chain+0xf/0x11 [<ffffffff81477e7a>] cpufreq_notify_transition+0x111/0x134 [<ffffffff8147b0d4>] powernowk8_target+0x53b/0x617 [<ffffffff8147723a>] __cpufreq_driver_target+0x2e/0x30 [<ffffffff8147a127>] cpufreq_governor_dbs+0x339/0x356 [<ffffffff81477394>] __cpufreq_governor+0xa8/0xe9 [<ffffffff81477525>] __cpufreq_set_policy+0x132/0x13e [<ffffffff8147848d>] cpufreq_add_dev_interface+0x272/0x28c Reported-by: Tobias Diedrich <ranma+xen@tdiedrich.de> Tested-by: Tobias Diedrich <ranma+xen@tdiedrich.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Jones <davej@redhat.com>
2011-06-12[CPUFREQ] Remove cpufreq_stats sysfs entries on module unload.Dave Jones
cpufreq_stats leaves behind its sysfs entries, which causes a panic when something stumbled across them. (Discovered by unloading cpufreq_stats while powertop was loaded). Signed-off-by: Dave Jones <davej@redhat.com> Cc: stable@kernel.org
2011-05-24cpufreq: make DB8500 cpufreq driver compileLinus Walleij
Concluding interface update and movement of the driver by making the DB8500 cpufreq driver compile in the cpufreq subsystem. Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24cpufreq: update DB8500 cpufreq driverLinus Walleij
This updates the ux500 cpufreq driver to the new interface from the updated DB8500 PRCMU Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: move CPUfreq driver to cpufreq subsystemLinus Walleij
As part of the ARM arch subsystem migration, move the DB8500 cpufreq driver to drivers/cpufreq as discussed with Dave Jones. The Makefile is not updated in order to avoid cross-subsystem conflicts for this file in merges. Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-19Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, cpu: Fix detection of Celeron Covington stepping A1 and B0 Documentation, ABI: Update L3 cache index disable text x86, AMD, cacheinfo: Fix L3 cache index disable checks x86, AMD, cacheinfo: Fix fallout caused by max3 conversion x86, cpu: Change NOP selection for certain Intel CPUs x86, cpu: Clean up and unify the NOP selection infrastructure x86, percpu: Use ASM_NOP4 instead of hardcoding P6_NOP4 x86, cpu: Move AMD Elan Kconfig under "Processor family" Fix up trivial conflicts in alternative handling (commit dc326fca2b64 "x86, cpu: Clean up and unify the NOP selection infrastructure" removed some hacky 5-byte instruction stuff, while commit d430d3d7e646 "jump label: Introduce static_branch() interface" renamed HAVE_JUMP_LABEL to CONFIG_JUMP_LABEL in the code that went away)
2011-05-19[CPUFREQ] Move x86 drivers to drivers/cpufreq/Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com>
2011-05-04[CPUFREQ] remove redundant sprintf from request_module call.Kees Cook
Since format string handling is part of request_module, there is no need to construct the module name. As such, drop the redundant sprintf and heap usage. Signed-off-by: Kees Cook <kees.cook@canonical.com> Signed-off-by: Dave Jones <davej@redhat.com>
2011-05-04[CPUFREQ] cpufreq_stats.c: Fixed brace coding style issueKarthigan Srinivasan
Fixed brace coding style issue. Signed-off-by: Karthigan Srinivasan <karthigan.srinivasan@hp.com> Signed-off-by: Dave Jones <davej@redhat.com>
2011-05-04[CPUFREQ] Fix memory leak in cpufreq_statsteven finney
When a CPU is taken offline in an SMP system, cpufreq_remove_dev() nulls out the per-cpu policy before cpufreq_stats_free_table() can make use of it. cpufreq_stats_free_table() then skips the call to sysfs_remove_group(), leaving about 100 bytes of sysfs-related memory unclaimed each time a CPU-removal occurs. Break up cpu_stats_free_table into sysfs and table portions, and call the sysfs portion early. Signed-off-by: Steven Finney <steven.finney@palm.com> Signed-off-by: Dave Jones <davej@redhat.com> Cc: stable@kernel.org
2011-05-04[CPUFREQ] use dynamic debug instead of custom infrastructureDominik Brodowski
With dynamic debug having gained the capability to report debug messages also during the boot process, it offers a far superior interface for debug messages than the custom cpufreq infrastructure. As a first step, remove the old cpufreq_debug_printk() function and replace it with a call to the generic pr_debug() function. How can dynamic debug be used on cpufreq? You need a kernel which has CONFIG_DYNAMIC_DEBUG enabled. To enabled debugging during runtime, mount debugfs and $ echo -n 'module cpufreq +p' > /sys/kernel/debug/dynamic_debug/control for debugging the complete "cpufreq" module. To achieve the same goal during boot, append ddebug_query="module cpufreq +p" as a boot parameter to the kernel of your choice. For more detailled instructions, please see Documentation/dynamic-debug-howto.txt Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dave Jones <davej@redhat.com>
2011-05-04[CPUFREQ] CPU hotplug, re-create sysfs directory and symlinksJacob Shin
When we discover CPUs that are affected by each other's frequency/voltage transitions, the first CPU gets a sysfs directory created, and rest of the siblings get symlinks. Currently, when we hotplug off only the first CPU, all of the symlinks and the sysfs directory gets removed. Even though rest of the siblings are still online and functional, they are orphaned, and no longer governed by cpufreq. This patch, given the above scenario, creates a sysfs directory for the first sibling and symlinks for the rest of the siblings. Please note the recursive call, it was rather too ugly to roll it out. And the removal of redundant NULL setting (it is already taken care of near the top of the function). Signed-off-by: Jacob Shin <jacob.shin@amd.com> Acked-by: Mark Langsdorf <mark.langsdorf@amd.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com> Cc: stable@kernel.org
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-23cpufreq: Use syscore_ops for boot CPU suspend/resume (v2)Rafael J. Wysocki
The cpufreq subsystem uses sysdev suspend and resume for executing cpufreq_suspend() and cpufreq_resume(), respectively, during system suspend, after interrupts have been switched off on the boot CPU, and during system resume, while interrupts are still off on the boot CPU. In both cases the other CPUs are off-line at the relevant point (either they have been switched off via CPU hotplug during suspend, or they haven't been switched on yet during resume). For this reason, although it may seem that cpufreq_suspend() and cpufreq_resume() are executed for all CPUs in the system, they are only called for the boot CPU in fact, which is quite confusing. To remove the confusion and to prepare for elimiating sysdev suspend and resume operations from the kernel enirely, convernt cpufreq to using a struct syscore_ops object for the boot CPU suspend and resume and rename the callbacks so that their names reflect their purpose. In addition, put some explanatory remarks into their kerneldoc comments. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-03-16[CPUFREQ] Remove the pm_message_t argument from driver suspendRafael J. Wysocki
None of the existing cpufreq drivers uses the second argument of its .suspend() callback (which isn't useful anyway), so remove it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Dave Jones <davej@redhat.com>
2011-03-16[CPUFREQ] Remove unneeded locksThomas Renninger
There cannot be any concurrent access to these through different cpu sysfs files anymore, because these tunables are now all global (not per cpu). I still have some doubts whether some of these locks were needed at all. Anyway, let's get rid of them. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com> CC: cpufreq@vger.kernel.org
2011-03-16[CPUFREQ] Remove old, deprecated per cpu ondemand/conservative sysfs filesThomas Renninger
Marked deprecated for quite a whilte now... Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com> CC: cpufreq@vger.kernel.org
2011-03-16[CPUFREQ] Remove deprecated sysfs file sampling_rate_maxThomas Renninger
Marked deprecated for quite a while now... Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com> CC: cpufreq@vger.kernel.org
2011-03-16[CPUFREQ] calculate delay after dbs_check_cpuVincent Guittot
calculate ondemand delay after dbs_check_cpu call because it can modify rate_mult value use freq_lo_jiffies value for the sub sample period of powersave_bias mode Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Dave Jones <davej@redhat.com>
2011-03-16[CPUFREQ] drivers/cpufreq: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dave Jones <davej@redhat.com>
2011-03-16Merge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix build failure introduced by s/freezeable/freezable/ workqueue: add system_freezeable_wq rds/ib: use system_wq instead of rds_ib_fmr_wq net/9p: replace p9_poll_task with a work net/9p: use system_wq instead of p9_mux_wq xfs: convert to alloc_workqueue() reiserfs: make commit_wq use the default concurrency level ocfs2: use system_wq instead of ocfs2_quota_wq ext4: convert to alloc_workqueue() scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path scsi/be2iscsi,qla2xxx: convert to alloc_workqueue() misc/iwmc3200top: use system_wq instead of dedicated workqueues i2o: use alloc_workqueue() instead of create_workqueue() acpi: kacpi*_wq don't need WQ_MEM_RECLAIM fs/aio: aio_wq isn't used in memory reclaim path input/tps6507x-ts: use system_wq instead of dedicated workqueue cpufreq: use system_wq instead of dedicated workqueues wireless/ipw2x00: use system_wq instead of dedicated workqueues arm/omap: use system_wq in mailbox workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
2011-03-01[CPUFREQ] fix BUG on cpufreq policy init failureJiri Slaby
cpufreq_register_driver sets cpufreq_driver to a structure owned (and placed) in the caller's memory. If cpufreq policy fails in its ->init function, sysdev_driver_register returns nonzero in cpufreq_register_driver. Now, cpufreq_register_driver returns an error without setting cpufreq_driver back to NULL. Usually cpufreq policy modules are unloaded because they propagate the error to the module init function and return that. So a later access to any member of cpufreq_driver causes bugs like: BUG: unable to handle kernel paging request at ffffffffa00270a0 IP: [<ffffffff8145eca3>] cpufreq_cpu_get+0x53/0xe0 PGD 1805067 PUD 1809063 PMD 1c3f90067 PTE 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/net/tun0/statistics/collisions CPU 0 Modules linked in: ... Pid: 5677, comm: thunderbird-bin Tainted: G W 2.6.38-rc4-mm1_64+ #1389 To be filled by O.E.M./To Be Filled By O.E.M. RIP: 0010:[<ffffffff8145eca3>] [<ffffffff8145eca3>] cpufreq_cpu_get+0x53/0xe0 RSP: 0018:ffff8801aec37d98 EFLAGS: 00010086 RAX: 0000000000000202 RBX: 0000000000000000 RCX: 0000000000000001 RDX: ffffffffa00270a0 RSI: 0000000000001000 RDI: ffffffff8199ece8 ... Call Trace: [<ffffffff8145f490>] cpufreq_quick_get+0x10/0x30 [<ffffffff8103f12b>] show_cpuinfo+0x2ab/0x300 [<ffffffff81136292>] seq_read+0xf2/0x3f0 [<ffffffff8126c5d3>] ? __strncpy_from_user+0x33/0x60 [<ffffffff8116850d>] proc_reg_read+0x6d/0xa0 [<ffffffff81116e53>] vfs_read+0xc3/0x180 [<ffffffff81116f5c>] sys_read+0x4c/0x90 [<ffffffff81030dbb>] system_call_fastpath+0x16/0x1b ... It's all cause by weird fail path handling in cpufreq_register_driver. To fix that, shuffle the code to do proper handling with gotos. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Dave Jones <davej@redhat.com>
2011-01-26cpufreq: use system_wq instead of dedicated workqueuesTejun Heo
With cmwq, there's no reason for cpufreq drivers to use separate workqueues. Remove the dedicated workqueues from cpufreq_conservative and cpufreq_ondemand and use system_wq instead. The work items are already sync canceled on stop, so it's already guaranteed that no work is running on module exit. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dave Jones <davej@redhat.com> Cc: cpufreq@vger.kernel.org
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-04perf: Clean up power events by introducing new, more generic onesThomas Renninger
Add these new power trace events: power:cpu_idle power:cpu_frequency power:machine_suspend The old C-state/idle accounting events: power:power_start power:power_end Have now a replacement (but we are still keeping the old tracepoints for compatibility): power:cpu_idle and power:power_frequency is replaced with: power:cpu_frequency power:machine_suspend is newly introduced. Jean Pihet has a patch integrated into the generic layer (kernel/power/suspend.c) which will make use of it. the type= field got removed from both, it was never used and the type is differed by the event type itself. perf timechart userspace tool gets adjusted in a separate patch. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: rjw@sisk.pl LKML-Reference: <1294073445-14812-3-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
2010-10-22[CPUFREQ] add sampling_down_factor tunable to improve ondemand performanceDavid C Niemi
Adds a new global tunable, sampling_down_factor. Set to 1 it makes no changes from existing behavior, but set to greater than 1 (e.g. 100) it acts as a multiplier for the scheduling interval for reevaluating load when the CPU is at its top speed due to high load. This improves performance by reducing the overhead of load evaluation and helping the CPU stay at its top speed when truly busy, rather than shifting back and forth in speed. This tunable has no effect on behavior at lower speeds/lower CPU loads. This patch is against 2.6.36-rc6. This patch should help solve kernel bug 19672 "ondemand is slow". Signed-off-by: David Niemi <dniemi@verisign.com> Acked-by: Venkatesh Pallipadi <venki@google.com> CC: Daniel Hollocher <danielhollocher@gmail.com> CC: <cpufreq-list@vger.kernel.org> CC: <linux-kernel@vger.kernel.org> Signed-off-by: Dave Jones <davej@redhat.com>
2010-10-22[CPUFREQ] drivers/cpufreq: Adjust confusing if indentationJulia Lawall
Indent the body of for_each_cpu. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03[CPUFREQ] fix brace coding style issue.Neal Buckendahl
This patch fixes up a brace warning found by the checkpatch.pl tool Signed-off-by: Neal Buckendahl <nealb001@tbcnet.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03[CPUFREQ] x86 cpufreq: Make trace_power_frequency cpufreq driver independentThomas Renninger
and fix the broken case if a core's frequency depends on others. trace_power_frequency was only implemented in a rather ungeneric way in acpi-cpufreq driver's target() function only. -> Move the call to trace_power_frequency to cpufreq.c:cpufreq_notify_transition() where CPUFREQ_POSTCHANGE notifier is triggered. This will support power frequency tracing by all cpufreq drivers trace_power_frequency did not trace frequency changes correctly when the userspace governor was used or when CPU cores' frequency depend on each other. -> Moving this into the CPUFREQ_POSTCHANGE notifier and pass the cpu which gets switched automatically fixes this. Robert Schoene provided some important fixes on top of my initial quick shot version which are integrated in this patch: - Forgot some changes in power_end trace (TP_printk/variable names) - Variable dummy in power_end must now be cpu_id - Use static 64 bit variable instead of unsigned int for cpu_id Signed-off-by: Thomas Renninger <trenn@suse.de> CC: davej@redhat.com CC: arjan@infradead.org CC: linux-kernel@vger.kernel.org CC: robert.schoene@tu-dresden.de Tested-by: robert.schoene@tu-dresden.de Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03[CPUFREQ] ondemand: don't synchronize sample rate unless multiple cpus presentJocelyn Falempe
For UP systems this is not required, and results in a more consistent sample interval. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jocelyn Falempe <jocelyn.falempe@motorola.com> Signed-off-by: Mike Chan <mike@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03[CPUFREQ] unexport (un)lock_policy_rwsem* functionsAmerigo Wang
lock_policy_rwsem_* and unlock_policy_rwsem_* functions are scheduled to be unexported when 2.6.33. Now there are no other callers of them out of cpufreq.c, unexport them and make them static. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03[CPUFREQ] ondemand: Refactor frequency increase codeMike Chan
Make simpler to read and call. *** v3 - Always call when powersave_bias is enabled. Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Mike Chan <mike@android.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03[CPUFREQ] fix memory leak in cpufreq_add_devXiaotian Feng
We didn't free policy->related_cpus in error path err_unlock_policy. This is catched by following kmemleak report: unreferenced object 0xffff88022a0b96d0 (size 512): comm "modprobe", pid 886, jiffies 4294689177 (age 780.694s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8111ebe5>] create_object+0x186/0x281 [<ffffffff814fad4f>] kmemleak_alloc+0x60/0xa7 [<ffffffff8111127a>] kmem_cache_alloc_node_notrace+0x120/0x142 [<ffffffff81262e4f>] alloc_cpumask_var_node+0x2c/0xd7 [<ffffffff81262f0b>] alloc_cpumask_var+0x11/0x13 [<ffffffff81262f1c>] zalloc_cpumask_var+0xf/0x11 [<ffffffff8140fac0>] cpufreq_add_dev+0x11f/0x547 [<ffffffff81334bda>] sysdev_driver_register+0xc2/0x11d [<ffffffff8140e334>] cpufreq_register_driver+0xcb/0x1b8 [<ffffffffa032e040>] 0xffffffffa032e040 [<ffffffff810021ba>] do_one_initcall+0x5e/0x15c [<ffffffff81087f94>] sys_init_module+0xa6/0x1e6 [<ffffffff81009bc2>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03[CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call ↵Andrej Gelenberg
(second call site)" 395913d0b1db37092ea3d9d69b832183b1dd84c5 ("[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)") is not needed, because there is no rwsem lock in cpufreq_ondemand and cpufreq_conservative anymore. Lock should not be released until the work done. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=1594 Signed-off-by: Andrej Gelenberg <andrej.gelenberg@udo.edu> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-05-18Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hypervisor: add missing <linux/module.h> Modify the VMware balloon driver for the new x86_hyper API x86, hypervisor: Export the x86_hyper* symbols x86: Clean up the hypervisor layer x86, HyperV: fix up the license to mshyperv.c x86: Detect running on a Microsoft HyperV system x86, cpu: Make APERF/MPERF a normal table-driven flag x86, k8: Fix build error when K8_NB is disabled x86, cacheinfo: Disable index in all four subcaches x86, cacheinfo: Make L3 cache info per node x86, cacheinfo: Reorganize AMD L3 cache structure x86, cacheinfo: Turn off L3 cache index disable feature in virtualized environments x86, cacheinfo: Unify AMD L3 cache index disable checking cpufreq: Unify sysfs attribute definition macros powernow-k8: Fix frequency reporting x86, cpufreq: Add APERF/MPERF support for AMD processors x86: Unify APERF/MPERF support powernow-k8: Add core performance boost support x86, cpu: Add AMD core boosting feature flag to /proc/cpuinfo Fix up trivial conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c and drivers/cpufreq/cpufreq_ondemand.c
2010-05-09ondemand: Make the iowait-is-busy time a sysfs tunableArjan van de Ven
Pavel Machek pointed out that not all CPUs have an efficient idle at high frequency. Specifically, older Intel and various AMD cpus would get a higher powerusage when copying files from USB. Mike Chan pointed out that the same is true for various ARM chips as well. Thomas Renninger suggested to make this a sysfs tunable with a reasonable default. This patch adds a sysfs tunable for the new behavior, and uses a very simple function to determine a reasonable default, depending on the CPU vendor/type. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: davej@redhat.com LKML-Reference: <20100509082651.46914d04@infradead.org> [ minor tidyup ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-09ondemand: Solve a big performance issue by counting IOWAIT time as busyArjan van de Ven
The ondemand cpufreq governor uses CPU busy time (e.g. not-idle time) as a measure for scaling the CPU frequency up or down. If the CPU is busy, the CPU frequency scales up, if it's idle, the CPU frequency scales down. Effectively, it uses the CPU busy time as proxy variable for the more nebulous "how critical is performance right now" question. This algorithm falls flat on its face in the light of workloads where you're alternatingly disk and CPU bound, such as the ever popular "git grep", but also things like startup of programs and maildir using email clients... much to the chagarin of Andrew Morton. This patch changes the ondemand algorithm to count iowait time as busy, not idle, time. As shown in the breakdown cases above, iowait is performance critical often, and by counting iowait, the proxy variable becomes a more accurate representation of the "how critical is performance" question. The problem and fix are both verified with the "perf timechar" tool. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100509082606.3d9f00d0@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-08Merge commit 'v2.6.34-rc6' into x86/cpuH. Peter Anvin
2010-04-24Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] use max load in conservative governor [CPUFREQ] fix a lockdep warning
2010-04-09cpufreq: Unify sysfs attribute definition macrosBorislav Petkov
Multiple modules used to define those which are with identical functionality and were needlessly replicated among the different cpufreq drivers. Push them into the header and remove duplication. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <1270065406-1814-7-git-send-email-bp@amd64.org> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-03-31[CPUFREQ] use max load in conservative governorDominik Brodowski
Instead of using the load of the last CPU in a package, use the maximum load of all CPUs in a package. Reported-by: Jean-Christian Goussard <jeanchristian.goussard@sfr.fr> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dave Jones <davej@redhat.com>
2010-03-31[CPUFREQ] fix a lockdep warningAmerigo Wang
There is no need to do sysfs_remove_link() or kobject_put() etc. when policy_rwsem_write is held, move them after releasing the lock. This fixes the lockdep warning: halt/4071 is trying to acquire lock: (s_active){++++.+}, at: [<c0000000001ef868>] .sysfs_addrm_finish+0x58/0xc0 but task is already holding lock: (&per_cpu(cpu_policy_rwsem, cpu)){+.+.+.}, at: [<c0000000004cd6ac>] .lock_policy_rwsem_write+0x84/0xf4 Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-07Driver core: Constify struct sysfs_ops in struct kobj_typeEmese Revfy
Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: Emese Revfy <re.emese@gmail.com> Acked-by: David Teigland <teigland@redhat.com> Acked-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-13[CPUFREQ] Fix ondemand to not request targets outside policy limitsNagananda.Chumbalkar@hp.com
Dominik said: target_freq cannot be below policy->min or above policy->max. If it were, the whole cpufreq subsystem is broken. But (answer): I think the "ondemand" governor can ask for a target frequency that is below policy->min. ... A patch such as below may be needed to sanitize the target frequency requested by "ondemand". The "conservative" governor already has this check: Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com> # diff -bur x/drivers/cpufreq/cpufreq_ondemand.c.orig y/drivers/cpufreq/cpufreq_ondemand.c
2009-12-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits) m68k: rename global variable vmalloc_end to m68k_vmalloc_end percpu: add missing per_cpu_ptr_to_phys() definition for UP percpu: Fix kdump failure if booted with percpu_alloc=page percpu: make misc percpu symbols unique percpu: make percpu symbols in ia64 unique percpu: make percpu symbols in powerpc unique percpu: make percpu symbols in x86 unique percpu: make percpu symbols in xen unique percpu: make percpu symbols in cpufreq unique percpu: make percpu symbols in oprofile unique percpu: make percpu symbols in tracer unique percpu: make percpu symbols under kernel/ and mm/ unique percpu: remove some sparse warnings percpu: make alloc_percpu() handle array types vmalloc: fix use of non-existent percpu variable in put_cpu_var() this_cpu: Use this_cpu_xx in trace_functions_graph.c this_cpu: Use this_cpu_xx for ftrace this_cpu: Use this_cpu_xx in nmi handling this_cpu: Use this_cpu operations in RCU this_cpu: Use this_cpu ops for VM statistics ... Fix up trivial (famous last words) global per-cpu naming conflicts in arch/x86/kvm/svm.c mm/slab.c