| Age | Commit message (Collapse) | Author |
|---|
|
Use devm_kmemdup_array() to avoid multiplication or possible overflows.
Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add True Random Number Generator(TRNG) driver for Versal
platform.
Co-developed-by: Mounika Botcha <mounika.botcha@amd.com>
Signed-off-by: Mounika Botcha <mounika.botcha@amd.com>
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since SEV or SNP may already be initialized in the previous kernel,
attempting to initialize them again in the kdump kernel can result
in SNP initialization failures, which in turn lead to IOMMU
initialization failures. Moreover, SNP/SEV guests are not run under a
kdump kernel, so there is no need to initialize SEV or SNP during
kdump boot.
Skip SNP and SEV INIT if doing kdump boot.
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/d884eff5f6180d8b8c6698a6168988118cf9cba1.1756157913.git.ashish.kalra@amd.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Loongson's Random Number Generator is found inside Loongson Security
Engine chip.
Co-developed-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20250705072045.1067-3-zhaoqunqin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
As noted in the kernel documentation [1], open-coded multiplication in
allocator arguments is discouraged because it can lead to integer overflow.
Use devm_kcalloc() to gain built-in overflow protection, making memory
allocation safer when calculating allocation size compared to explicit
multiplication.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments #1
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As noted in the kernel documentation [1], open-coded multiplication in
allocator arguments is discouraged because it can lead to integer overflow.
Use kcalloc() to gain built-in overflow protection, making memory
allocation safer when calculating allocation size compared to explicit
multiplication. Similarly, use size_add() instead of explicit addition
for 'uobj_chunk_num + sobj_chunk_num'.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments #1
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In stream mode, the hardware needs to combine the length of the
previous literal to calculate the length of the current literal.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The device interrupt vector 3 is an error interrupt for
physical function and a reserved interrupt for virtual function.
However, the driver has not registered the reserved interrupt for
virtual function. When allocating interrupts, the number of interrupts
is allocated based on powers of two, which includes this interrupt.
When the system enables GICv4 and the virtual function passthrough
to the virtual machine, releasing the interrupt in the driver
triggers a warning.
The WARNING report is:
WARNING: CPU: 62 PID: 14889 at arch/arm64/kvm/vgic/vgic-its.c:852 its_free_ite+0x94/0xb4
Therefore, register a reserved interrupt for VF and set the
IRQF_NO_AUTOEN flag to avoid that warning.
Fixes: 3536cc55cada ("crypto: hisilicon/qm - support get device irq information from hardware registers")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
same device
Function rate limiting is set through physical function driver.
Users configure by providing function information and rate limit values.
Before configuration, it is necessary to check whether the
provided function and PF belong to the same device.
Fixes: 22d7a6c39cab ("crypto: hisilicon/qm - add pci bdf number check")
Signed-off-by: Zhushuai Yin <yinzhushuai@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
address prefetch
After enabling address prefetch, check the sva module status. If all
previous prefetch requests from the sva module are not completed, then
disable the address prefetch to ensure normal execution of new task
operations. After disabling address prefetch, check if all requests
from the sva module have been completed.
Fixes: a5c164b195a8 ("crypto: hisilicon/qm - support address prefetching")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When the device resumes from a suspended state, it will revert to its
initial state and requires re-enabling. Currently, the address prefetch
function is not re-enabled after device resuming. Move the address prefetch
enable to the initialization process. In this way, the address prefetch
can be enabled when the device resumes by calling the initialization
process.
Fixes: 607c191b371d ("crypto: hisilicon - support runtime PM for accelerator device")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
mode configurations
When configuring the high-performance mode register, there is no
need to verify whether the register has been successfully
enabled, as there is no possibility of a write failure for this
register.
Fixes: a9864bae1806 ("crypto: hisilicon/zip - add zip comp high perf mode configuration")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Logging messages that show some type of "out of memory" error are generally
unnecessary as there is a generic message and a stack dump done by the
memory subsystem. These messages generally increase kernel size without
much added value[1].
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value
instead.
[1]: https://lore.kernel.org/lkml/1402419340.30479.18.camel@joe-AO725/
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Logging messages that show some type of "out of memory" error are generally
unnecessary as there is a generic message and a stack dump done by the
memory subsystem. These messages generally increase kernel size without
much added value[1].
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value
instead.
[1]: https://lore.kernel.org/lkml/1402419340.30479.18.camel@joe-AO725/
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for ECB and CBC modes in the AES Engine of the DTHE V2
hardware cryptography engine.
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reimplement crypto/md5.c on top of the new MD5 library functions. Also
add support for HMAC-MD5, again just wrapping the library functions.
This closely mirrors crypto/sha1.c.
Link: https://lore.kernel.org/r/20250805222855.10362-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
The function "psp_poulate_hsti" was misspelled. This patch corrects
the typo to "psp_populate_hsti" in both the function definition and
its call site within psp_init_hsti().
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>> ---
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In otx2_cpt_dl_custom_egrp_create(), strscpy() is called with the length
of the source string rather than the size of the destination buffer.
This is fine as long as the destination buffer is larger than the source
string, but we should still use the destination buffer size instead to
call strscpy() as intended. And since 'tmp_buf' is a fixed-size buffer,
we can safely omit the size argument and let strscpy() infer it using
sizeof().
Fixes: d9d7749773e8 ("crypto: octeontx2 - add apis for custom engine groups")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the redundant __GFP_ZERO flag from kzalloc() since kzalloc()
inherently zeroes memory.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The SNP_VLEK_LOAD IOCTL currently fails due to sev_cmd_buffer_len()
returning the default expected buffer length of 0 instead of the correct
value, which would be sizeof(struct sev_user_data_snp_vlek_load). Add
specific handling for SNP_VLEK_LOAD so the correct expected size is
returned.
Reported-by: Diego GonzalezVillalobos <Diego.GonzalezVillalobos@amd.com>
Cc: Diego GonzalezVillalobos <Diego.GonzalezVillalobos@amd.com>
Fixes: 332d2c1d713e ("crypto: ccp: Add the SNP_VLEK_LOAD command")
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
sg_nents_for_len() returns an int which is negative in case of error.
Fixes: 472b04444cd3 ("crypto: keembay - Add Keem Bay OCS HCU driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add slice-specific command queue counters for QAT GEN6 devices to monitor
utilization metrics, including wait time, execution duration, and release
events.
Update the documentation to reflect the new command queue counter
functionality.
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a new performance counter that measures the average ring buffer idle
duration.
This metric is now included in the telemetry counters exposed via
debugfs for QAT GEN6 devices.
Update the documentation to reflect the new idle duration counter
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is a spelling mistake in the module description text. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Maxime Méré <maxime.mere@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To enable ciphertext hiding, it must be specified in the SNP_INIT_EX
command as part of SNP initialization.
Modify the sev_platform_init_args structure, which is used as input to
sev_platform_init(), to include a field that, when non-zero,
indicates that ciphertext hiding should be enabled and specifies the
maximum ASID that can be used for an SEV-SNP guest.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
hiding feature
Implement an API that checks the overall feature support for SEV-SNP
ciphertext hiding.
This API verifies both the support of the SEV firmware for the feature
and its enablement in the platform's BIOS.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The FEATURE_INFO command provides hypervisors with a programmatic means
to learn about the supported features of the currently loaded firmware.
This command mimics the CPUID instruction relative to sub-leaf input and
the four unsigned integer output values. To obtain information
regarding the features present in the currently loaded SEV firmware,
use the SNP_FEATURE_INFO command.
Cache the SNP platform status and feature information from CPUID
0x8000_0024 in the sev_device structure. If SNP is enabled, utilize
this cached SNP platform status for the API major, minor and build
version.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Cache the SEV platform status into sev_device structure and use this
cached SEV platform status for api_major/minor/build.
The platform state is unique between SEV and SNP and hence needs to be
tracked independently.
Remove the state field from sev_device structure and instead track SEV
state from the cached SEV platform status.
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Allow hash drivers without fallbacks (e.g., hardware key)
Algorithms:
- Add hmac hardware key support (phmac) on s390
- Re-enable sha384 in FIPS mode
- Disable sha1 in FIPS mode
- Convert zstd to acomp
Drivers:
- Lower priority of qat skcipher and aead
- Convert aspeed to partial block API
- Add iMX8QXP support in caam
- Add rate limiting support for GEN6 devices in qat
- Enable telemetry for GEN6 devices in qat
- Implement full backlog mode for hisilicon/sec2"
* tag 'v6.17-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: keembay - Use min() to simplify ocs_create_linked_list_from_sg()
crypto: hisilicon/hpre - fix dma unmap sequence
crypto: qat - make adf_dev_autoreset() static
crypto: ccp - reduce stack usage in ccp_run_aes_gcm_cmd
crypto: qat - refactor ring-related debug functions
crypto: qat - fix seq_file position update in adf_ring_next()
crypto: qat - fix DMA direction for compression on GEN2 devices
crypto: jitter - replace ARRAY_SIZE definition with header include
crypto: engine - remove {prepare,unprepare}_crypt_hardware callbacks
crypto: engine - remove request batching support
crypto: qat - flush misc workqueue during device shutdown
crypto: qat - enable rate limiting feature for GEN6 devices
crypto: qat - add compression slice count for rate limiting
crypto: qat - add get_svc_slice_cnt() in device data structure
crypto: qat - add adf_rl_get_num_svc_aes() in rate limiting
crypto: qat - relocate service related functions
crypto: qat - consolidate service enums
crypto: qat - add decompression service for rate limiting
crypto: qat - validate service in rate limiting sysfs api
crypto: hisilicon/sec2 - implement full backlog mode for sec
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC code
It now lives in lib/crc/$(SRCARCH)/ rather than arch/$(SRCARCH)/lib/,
and it is no longer artificially split into separate generic and arch
modules. This allows better inlining and dead code elimination
The generic CRC code is also no longer exported, simplifying the API.
(This mirrors the similar changes to SHA-1 and SHA-2 in lib/crypto/,
which can be found in the "Crypto library updates" pull request)
- Improve crc32c() performance on newer x86_64 CPUs on long messages by
enabling the VPCLMULQDQ optimized code
- Simplify the crypto_shash wrappers for crc32_le() and crc32c()
Register just one shash algorithm for each that uses the (fully
optimized) library functions, instead of unnecessarily providing
direct access to the generic CRC code
- Remove unused and obsolete drivers for hardware CRC engines
- Remove CRC-32 combination functions that are no longer used
- Add kerneldoc for crc32_le(), crc32_be(), and crc32c()
- Convert the crc32() macro to an inline function
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (26 commits)
lib/crc: x86/crc32c: Enable VPCLMULQDQ optimization where beneficial
lib/crc: x86: Reorganize crc-pclmul static_call initialization
lib/crc: crc64: Add include/linux/crc64.h to kernel-api.rst
lib/crc: crc32: Change crc32() from macro to inline function and remove cast
nvmem: layouts: Switch from crc32() to crc32_le()
lib/crc: crc32: Document crc32_le(), crc32_be(), and crc32c()
lib/crc: Explicitly include <linux/export.h>
lib/crc: Remove ARCH_HAS_* kconfig symbols
lib/crc: x86: Migrate optimized CRC code into lib/crc/
lib/crc: sparc: Migrate optimized CRC code into lib/crc/
lib/crc: s390: Migrate optimized CRC code into lib/crc/
lib/crc: riscv: Migrate optimized CRC code into lib/crc/
lib/crc: powerpc: Migrate optimized CRC code into lib/crc/
lib/crc: mips: Migrate optimized CRC code into lib/crc/
lib/crc: loongarch: Migrate optimized CRC code into lib/crc/
lib/crc: arm64: Migrate optimized CRC code into lib/crc/
lib/crc: arm: Migrate optimized CRC code into lib/crc/
lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/
lib/crc: Move files into lib/crc/
lib/crc32: Remove unused combination support
...
|
|
Use min() to simplify ocs_create_linked_list_from_sg() and improve its
readability.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Perform DMA unmapping operations before processing data.
Otherwise, there may be unsynchronized data accessed by
the CPU when the SWIOTLB is enabled.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The function adf_dev_autoreset() is only used within adf_aer.c and does
not need to be exposed outside the compilation unit. Make it static and
remove it from the header adf_common_drv.h.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A number of functions in this file have large structures on the stack,
ccp_run_aes_gcm_cmd() being the worst, in particular when KASAN
is enabled on gcc:
drivers/crypto/ccp/ccp-ops.c: In function 'ccp_run_sha_cmd':
drivers/crypto/ccp/ccp-ops.c:1833:1: error: the frame size of 1136 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
drivers/crypto/ccp/ccp-ops.c: In function 'ccp_run_aes_gcm_cmd':
drivers/crypto/ccp/ccp-ops.c:914:1: error: the frame size of 1632 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Avoid the issue by using dynamic memory allocation in the worst one
of these.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Refactor the functions `adf_ring_start()` and `adf_ring_next()` to
improve readability.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The `adf_ring_next()` function in the QAT debug transport interface
fails to correctly update the position index when reaching the end of
the ring elements. This triggers the following kernel warning when
reading ring files, such as
/sys/kernel/debug/qat_c6xx_<D:B:D:F>/transport/bank_00/ring_00:
[27725.022965] seq_file: buggy .next function adf_ring_next [intel_qat] did not update position index
Ensure that the `*pos` index is incremented before returning NULL when
after the last element in the ring is found, satisfying the seq_file API
requirements and preventing the warning.
Fixes: a672a9dc872e ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
QAT devices perform an additional integrity check during compression by
decompressing the output. Starting from QAT GEN4, this verification is
done in-line by the hardware. However, on GEN2 devices, the hardware
reads back the compressed output from the destination buffer and performs
a decompression operation using it as the source.
In the current QAT driver, destination buffers are always marked as
write-only. This is incorrect for QAT GEN2 compression, where the buffer
is also read during verification. Since commit 6f5dc7658094
("iommu/vt-d: Restore WO permissions on second-level paging entries"),
merged in v6.16-rc1, write-only permissions are strictly enforced, leading
to DMAR errors when using QAT GEN2 devices for compression, if VT-d is
enabled.
Mark the destination buffers as DMA_BIDIRECTIONAL. This ensures
compatibility with GEN2 devices, even though it is not required for
QAT GEN4 and later.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Fixes: cf5bb835b7c8 ("crypto: qat - fix DMA transfer direction")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc8).
Conflicts:
drivers/net/ethernet/microsoft/mana/gdma_main.c
9669ddda18fb ("net: mana: Fix warnings for missing export.h header inclusion")
755391121038 ("net: mana: Allocate MSI-X vectors dynamically")
https://lore.kernel.org/20250711130752.23023d98@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/icssg/icssg_prueth.h
6e86fb73de0f ("net: ti: icssg-prueth: Fix buffer allocation for ICSSG")
ffe8a4909176 ("net: ti: icssg-prueth: Read firmware-names from device tree")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove request batching support from crypto_engine, as there are no
drivers using this feature and it doesn't really work that well.
Instead of doing batching based on backlog, a more optimal approach
would be for the user to handle the batching (similar to how IPsec
can hook into GSO to get 64K of data each time or how block encryption
can use unit sizes much greater than 4K).
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Repeated loading and unloading of a device specific QAT driver, for
example qat_4xxx, in a tight loop can lead to a crash due to a
use-after-free scenario. This occurs when a power management (PM)
interrupt triggers just before the device-specific driver (e.g.,
qat_4xxx.ko) is unloaded, while the core driver (intel_qat.ko) remains
loaded.
Since the driver uses a shared workqueue (`qat_misc_wq`) across all
devices and owned by intel_qat.ko, a deferred routine from the
device-specific driver may still be pending in the queue. If this
routine executes after the driver is unloaded, it can dereference freed
memory, resulting in a page fault and kernel crash like the following:
BUG: unable to handle page fault for address: ffa000002e50a01c
#PF: supervisor read access in kernel mode
RIP: 0010:pm_bh_handler+0x1d2/0x250 [intel_qat]
Call Trace:
pm_bh_handler+0x1d2/0x250 [intel_qat]
process_one_work+0x171/0x340
worker_thread+0x277/0x3a0
kthread+0xf0/0x120
ret_from_fork+0x2d/0x50
To prevent this, flush the misc workqueue during device shutdown to
ensure that all pending work items are completed before the driver is
unloaded.
Note: This approach may slightly increase shutdown latency if the
workqueue contains jobs from other devices, but it ensures correctness
and stability.
Fixes: e5745f34113b ("crypto: qat - enable power management for QAT GEN4")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for enabling rate limiting(RL) feature for QAT GEN6 by
initializing the rl_data member in adf_hw_device_data structure.
Implement init_num_svc_aes() for GEN6 which will populate the number of
AEs associated with the RL service type.
Implement adf_gen6_get_svc_slice_cnt() for GEN6 which will return
the slice count that can support the RL service type.
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In QAT GEN4 devices, the compression slice count was tracked using the
dcpr_cnt field.
Introduce a new cpr_cnt field in the rate limiting (RL) infrastructure to
track the compression (CPR) slice count independently. The cpr_cnt value is
populated via the RL_INIT admin message.
The existing dcpr_cnt field will now be used exclusively to cache the
decompression slice count, ensuring a clear separation between compression
and decompression tracking.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enhance the adf_hw_device_data structure by introducing a new callback
function get_svc_slice_cnt(), which provides a mechanism to query the
total number of accelerator available on the device for a specific
service.
Implement adf_gen4_get_svc_slice_cnt() for QAT GEN4 devices to support this
new interface. This function returns the total accelerator count for a
specific service.
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enhance the rate limiting (RL) infrastructure by adding
adf_rl_get_num_svc_aes() which can be used to fetch the number of engines
associated with the service type. Expand the structure adf_rl_hw_data
with an array that contains the number of AEs per service.
Implement adf_gen4_init_num_svc_aes() for QAT GEN4 devices to calculate
the total number of acceleration engines dedicated to a specific service.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Rename (1) is_service_enabled() to adf_is_service_enabled(), and
(2) srv_to_cfg_svc_type() to adf_srv_to_cfg_svc_type(), and move them to
adf_cfg_services.c which is the appropriate place for configuration-related
service logic. This improves code organization and modularity by grouping
related service configuration logic in a single location.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The enums `adf_base_services` (used in rate limiting) and `adf_services`
define the same values, resulting in code duplication.
To improve consistency across the QAT driver: (1) rename `adf_services`
to `adf_base_services` in adf_cfg_services.c to better reflect its role
in defining core services (those with dedicated accelerators),
(2) introduce a new `adf_extended_services` enum starting from
`SVC_BASE_COUNT`, and move `SVC_DCC` into it, as it represents an
extended service (DC with chaining), and (3) remove the redundant
`adf_base_services` enum from the rate limiting implementation.
This does not introduce any functional change.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a new base service type ADF_SVC_DECOMP to the QAT rate limiting (RL)
infrastructure. This enables RL support for the decompression (DECOMP)
service type, allowing service-level agreements (SLAs) to be enforced
when decompression is configured.
The new service is exposed in the sysfs RL service list for visibility.
Note that this support is applicable only to devices that provide the
decompression service, such as QAT GEN6 devices.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The sysfs interface 'qat_rl/srv' currently allows all valid services,
even if a service is not configured for the device. This leads to a failure
when attempting to add the SLA using 'qat_rl/sla_op'.
Add a check using is_service_enabled() to ensure the requested service is
enabled. If not, return -EINVAL to prevent invalid configurations.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
