summaryrefslogtreecommitdiff
path: root/drivers/dma/fsldma.h
AgeCommit message (Collapse)Author
2011-03-11fsldma: fix controller lockupsIra Snyder
Enabling poisoning in the dmapool API quickly showed that the DMA controller was fetching descriptors that should not have been in use. This has caused intermittent controller lockups during testing. I have been unable to figure out the exact set of conditions which cause this to happen. However, I believe it is related to the driver using the hardware registers to track whether the controller is busy or not. The code can incorrectly decide that the hardware is idle due to lag between register writes and the hardware actually becoming busy. To fix this, the driver has been reworked to explicitly track the state of the hardware, rather than try to guess what it is doing based on the register values. This has passed dmatest with 10 threads per channel, 100000 iterations per thread several times without error. Previously, this would fail within a few seconds. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-03-11fsldma: minor codingstyle and consistency fixesIra Snyder
This fixes some minor violations of the coding style. It also changes the style of the device_prep_dma_*() function definitions so they are identical. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-03-11fsldma: use channel name in printk outputIra Snyder
This makes debugging the driver much easier when multiple channels are running concurrently. In addition, you can see how much descriptor memory each channel has allocated via the dmapool API in sysfs. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-12-13fsldma: fix issue of slow dmaForrest Shi
Fixed fsl dma slow issue by initializing dma mode register with bandwidth control. It boosts dma performance and should works with 85xx board. Signed-off-by: Forrest Shi <b29237@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02fsldma: major cleanups and fixesIra Snyder
Fix locking. Use two queues in the driver, one for pending transacions, and one for transactions which are actually running on the hardware. Call dma_run_dependencies() on descriptor cleanup so that the async_tx API works correctly. There are a number of places throughout the code where lists of descriptors are freed in a loop. Create functions to handle this, and use them instead of open-coding the loop each time. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02fsldma: clean up the OF subsystem routinesIra Snyder
This fixes some errors in the cleanup paths of the OF subsystem, including missing checks for ioremap failing. Also, some variables were renamed for brevity. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02fsldma: rename dest to dst for uniformityIra Snyder
Most functions in the standard library use "dst" as a parameter, rather than "dest". This renames all use of "dest" to "dst" to match the usual convention. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02fsldma: rename struct fsl_dma_chan to struct fsldma_chanIra Snyder
This is the beginning of a cleanup which will change all instances of "fsl_dma" to "fsldma" to match the name of the driver itself. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02fsldma: remove unused structure membersIra Snyder
Remove some unused members from the fsldma data structures. A few trivial uses of struct resource were converted to use the stack rather than keeping the memory allocated for the lifetime of the driver. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08fsldma: split apart external pause and request count featuresIra Snyder
When using the Freescale DMA controller in external control mode, both the request count and external pause bits need to be setup correctly. This was being done with the same function. The 83xx controller lacks the external pause feature, but has a similar feature called external start. This feature requires that the request count bits be setup correctly. Split the function into two parts, to make it possible to use the external start feature on the 83xx controller. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08fsldma: implement a private tx_listDan Williams
Drop fsldma's use of tx_list from struct dma_async_tx_descriptor in preparation for removal of this field. Cc: Li Yang <leoli@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-06-16fsldma: use PCI Read Multiple commandIra W. Snyder
By default, the Freescale 83xx DMA controller uses the PCI Read Line command when reading data over the PCI bus. Setting the controller to use the PCI Read Multiple command instead allows the controller to read much larger bursts of data, which provides a drastic speed increase. The slowdown due to using PCI Read Line was only observed when a PCI-to-PCI bridge was between the devices trying to communicate. A simple test driver showed an increase from 4MB/sec to 116MB/sec when performing DMA over the PCI bus. Using DMA to transfer between blocks of local SDRAM showed no change in performance with this patch. The dmatest driver was also used to verify the correctness of the transfers, and showed no errors. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-09-26fsldma: allow Freescale Elo DMA driver to be compiled as a moduleTimur Tabi
Modify the Freescale Elo / Elo Plus DMA driver so that it can be compiled as a module. The primary change is to stop treating the DMA controller as a bus, and the DMA channels as devices on the bus. This is because the Open Firmware (OF) kernel code does not allow busses to be removed, so although we can call of_platform_bus_probe() to probe the DMA channels, there is no of_platform_bus_remove(). Instead, the DMA channels are manually probed, similar to what fsl_elbc_nand.c does. Cc: Scott Wood <scottwood@freescale.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-03-30fix the broken annotations in fsldmaAl Viro
a) every bitwise declaration will give a unique type; use typedefs. b) no need to bother with the stuff pointed to by iomem pointers, unless it's accessed directly. noderef will force us to use helpers anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-18fsldma: Fix the DMA halt when using DMA_INTERRUPT async_tx transfer.Zhang Wei
The DMA_INTERRUPT async_tx is a NULL transfer, thus the BCR(count register) is 0. When the transfer started with a byte count of zero, the DMA controller will triger a PE(programming error) event and halt, not a normal interrupt. I add special codes for PE event and DMA_INTERRUPT async_tx testing. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-03-04dmaengine: add driver for Freescale MPC85xx DMA controllerZhang Wei
The driver implements DMA engine API for Freescale MPC85xx DMA controller, which could be used by devices in the silicon. The driver supports the Basic mode of Freescale MPC85xx DMA controller. The MPC85xx processors supported include MPC8540/60, MPC8555, MPC8548, MPC8641 and so on. The MPC83xx(MPC8349, MPC8360) are also supported. [kamalesh@linux.vnet.ibm.com: build fix] [dan.j.williams@intel.com: merge mm fixes, rebase on async_tx-2.6.25] Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> Acked-by: Kumar Gala <galak@gate.crashing.org> Cc: Shannon Nelson <shannon.nelson@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>