summaryrefslogtreecommitdiff
path: root/drivers/extcon
AgeCommit message (Collapse)Author
2021-11-08Merge remote-tracking branch 'fscl/5.4-2.3.x-imx' into toradex_5.4-2.3.x-imxDenys Drozdov
2021-07-19extcon: intel-mrfld: Sync hardware and software state on initFerry Toth
commit ecb5bdff901139850fb3ca3ae2d0cccac045bc52 upstream. extcon driver for Basin Cove PMIC shadows the switch status used for dwc3 DRD to detect a change in the switch position. This change initializes the status at probe time. Cc: stable@vger.kernel.org Fixes: 492929c54791 ("extcon: mrfld: Introduce extcon driver for Basin Cove PMIC") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-15extcon: arizona: Fix various races on driver unbindHans de Goede
[ Upstream commit e5b499f6fb17bc95a813e85d0796522280203806 ] We must free/disable all interrupts and cancel all pending works before doing further cleanup. Before this commit arizona_extcon_remove() was doing several register writes to shut things down before disabling the IRQs and it was cancelling only 1 of the 3 different works used. Move all the register-writes shutting things down to after the disabling of the IRQs and add the 2 missing cancel_delayed_work_sync() calls. This fixes various possible races on driver unbind. One of which would always trigger on devices using the mic-clamp feature for jack detection. The ARIZONA_MICD_CLAMP_MODE_MASK update was done before disabling the IRQs, causing: 1. arizona_jackdet() to run 2. detect a jack being inserted (clamp disabled means jack inserted) 3. call arizona_start_mic() which: 3.1 Enables the MICVDD regulator 3.2 takes a pm_runtime_reference And this was all happening after the ARIZONA_MICD_ENA bit clearing, which would undo 3.1 and 3.2 because the ARIZONA_MICD_CLAMP_MODE_MASK update was being done after the ARIZONA_MICD_ENA bit clearing. So this means that arizona_extcon_remove() would exit with 1. MICVDD enabled and 2. The pm_runtime_reference being unbalanced. MICVDD still being enabled caused the following oops when the regulator is released by the devm framework: [ 2850.745757] ------------[ cut here ]------------ [ 2850.745827] WARNING: CPU: 2 PID: 2098 at drivers/regulator/core.c:2123 _regulator_put.part.0+0x19f/0x1b0 [ 2850.745835] Modules linked in: extcon_arizona ... ... [ 2850.746909] Call Trace: [ 2850.746932] regulator_put+0x2d/0x40 [ 2850.746946] release_nodes+0x22a/0x260 [ 2850.746984] __device_release_driver+0x190/0x240 [ 2850.747002] driver_detach+0xd4/0x120 ... [ 2850.747337] ---[ end trace f455dfd7abd9781f ]--- Note this oops is just one of various theoretically possible races caused by the wrong ordering inside arizona_extcon_remove(), this fixes the ordering fixing all possible races, including the reported oops. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-15extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has ↵Hans de Goede
been unplugged [ Upstream commit c309a3e8793f7e01c4a4ec7960658380572cb576 ] When the jack is partially inserted and then removed again it may be removed while the hpdet code is running. In this case the following may happen: 1. The "JACKDET rise" or ""JACKDET fall" IRQ triggers 2. arizona_jackdet runs and takes info->lock 3. The "HPDET" IRQ triggers 4. arizona_hpdet_irq runs, blocks on info->lock 5. arizona_jackdet calls arizona_stop_mic() and clears info->hpdet_done 6. arizona_jackdet releases info->lock 7. arizona_hpdet_irq now can continue running and: 7.1 Calls arizona_start_mic() (if a mic was detected) 7.2 sets info->hpdet_done Step 7 is undesirable / a bug: 7.1 causes the device to stay in a high power-state (with MICVDD enabled) 7.2 causes hpdet to not run on the next jack insertion, which in turn causes the EXTCON_JACK_HEADPHONE state to never get set This fixes both issues by skipping these 2 steps when arizona_hpdet_irq runs after the jack has been unplugged. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14extcon: max8997: Add missing modalias stringMarek Szyprowski
[ Upstream commit dc11fc2991e9efbceef93912b83e333d2835fb19 ] The platform device driver name is "max8997-muic", so advertise it properly in the modalias string. This fixes automated module loading when this driver is compiled as a module. Fixes: b76668ba8a77 ("Extcon: add MAX8997 extcon driver") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14extcon: sm5502: Drop invalid register write in sm5502_reg_dataStephan Gerhold
[ Upstream commit d25b224f8e5507879b36a769a6d1324cf163466c ] When sm5502_init_dev_type() iterates over sm5502_reg_data to initialize the registers it is limited by ARRAY_SIZE(sm5502_reg_data). There is no need to add another empty element to sm5502_reg_data. Having the additional empty element in sm5502_reg_data will just result in writing 0xff to register 0x00, which does not really make sense. Fixes: 914b881f9452 ("extcon: sm5502: Add support new SM5502 extcon device driver") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14extcon: extcon-max8997: Fix IRQ freeing at error pathMatti Vaittinen
[ Upstream commit 610bdc04830a864115e6928fc944f1171dfff6f3 ] If reading MAX8997_MUIC_REG_STATUS1 fails at probe the driver exits without freeing the requested IRQs. Free the IRQs prior returning if reading the status fails. Fixes: 3e34c8198960 ("extcon: max8997: Avoid forcing UART path on drive probe") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/27ee4a48ee775c3f8c9d90459c18b6f2b15edc76.1623146580.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11extcon: arizona: Fix various races on driver unbindHans de Goede
[ Upstream commit e5b499f6fb17bc95a813e85d0796522280203806 ] We must free/disable all interrupts and cancel all pending works before doing further cleanup. Before this commit arizona_extcon_remove() was doing several register writes to shut things down before disabling the IRQs and it was cancelling only 1 of the 3 different works used. Move all the register-writes shutting things down to after the disabling of the IRQs and add the 2 missing cancel_delayed_work_sync() calls. This fixes various possible races on driver unbind. One of which would always trigger on devices using the mic-clamp feature for jack detection. The ARIZONA_MICD_CLAMP_MODE_MASK update was done before disabling the IRQs, causing: 1. arizona_jackdet() to run 2. detect a jack being inserted (clamp disabled means jack inserted) 3. call arizona_start_mic() which: 3.1 Enables the MICVDD regulator 3.2 takes a pm_runtime_reference And this was all happening after the ARIZONA_MICD_ENA bit clearing, which would undo 3.1 and 3.2 because the ARIZONA_MICD_CLAMP_MODE_MASK update was being done after the ARIZONA_MICD_ENA bit clearing. So this means that arizona_extcon_remove() would exit with 1. MICVDD enabled and 2. The pm_runtime_reference being unbalanced. MICVDD still being enabled caused the following oops when the regulator is released by the devm framework: [ 2850.745757] ------------[ cut here ]------------ [ 2850.745827] WARNING: CPU: 2 PID: 2098 at drivers/regulator/core.c:2123 _regulator_put.part.0+0x19f/0x1b0 [ 2850.745835] Modules linked in: extcon_arizona ... ... [ 2850.746909] Call Trace: [ 2850.746932] regulator_put+0x2d/0x40 [ 2850.746946] release_nodes+0x22a/0x260 [ 2850.746984] __device_release_driver+0x190/0x240 [ 2850.747002] driver_detach+0xd4/0x120 ... [ 2850.747337] ---[ end trace f455dfd7abd9781f ]--- Note this oops is just one of various theoretically possible races caused by the wrong ordering inside arizona_extcon_remove(), this fixes the ordering fixing all possible races, including the reported oops. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-11extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has ↵Hans de Goede
been unplugged [ Upstream commit c309a3e8793f7e01c4a4ec7960658380572cb576 ] When the jack is partially inserted and then removed again it may be removed while the hpdet code is running. In this case the following may happen: 1. The "JACKDET rise" or ""JACKDET fall" IRQ triggers 2. arizona_jackdet runs and takes info->lock 3. The "HPDET" IRQ triggers 4. arizona_hpdet_irq runs, blocks on info->lock 5. arizona_jackdet calls arizona_stop_mic() and clears info->hpdet_done 6. arizona_jackdet releases info->lock 7. arizona_hpdet_irq now can continue running and: 7.1 Calls arizona_start_mic() (if a mic was detected) 7.2 sets info->hpdet_done Step 7 is undesirable / a bug: 7.1 causes the device to stay in a high power-state (with MICVDD enabled) 7.2 causes hpdet to not run on the next jack insertion, which in turn causes the EXTCON_JACK_HEADPHONE state to never get set This fixes both issues by skipping these 2 steps when arizona_hpdet_irq runs after the jack has been unplugged. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-05Merge commit '28910e01c43d9735f06fddbeaa42df3e112d1b3e' into ↵Marcel Ziswiler
toradex_5.4-2.3.x-imx This basically contains NXP BSP Patch L5.4.70_2.3.2 plus kernel.org v5.4.115 from https://github.com/Freescale/linux-fslc/tree/5.4-2.3.x-imx. Related-to: ELB-3958 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-04-07extcon: Fix error handling in extcon_dev_registerDinghao Liu
[ Upstream commit d3bdd1c3140724967ca4136755538fa7c05c2b4e ] When devm_kcalloc() fails, we should execute device_unregister() to unregister edev->dev from system. Fixes: 046050f6e623e ("extcon: Update the prototype of extcon_register_notifier() with enum extcon") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-27extcon: usb-gpio: increase debounce timeMarcel Ziswiler
Testing on Colibri Evaluation board V3.x has shown even 50 ms not being enough to avoid unloading and immediately reloading the EHCI USB host controller driver upon OTG cable removal which is of course suboptimal. This patch increases it to 100 ms which should leave enough safety margin. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit fc11c312c493c262a5f8a60d13e539862db3efd1) (cherry picked from commit cec9878838472ce8fedad917b949a6cc8843af4c) (cherry picked from commit 5e460b560a6cff3db91324ca6cec1244ed85fadd)
2020-12-30extcon: max77693: Fix modalias stringMarek Szyprowski
[ Upstream commit e1efdb604f5c9903a5d92ef42244009d3c04880f ] The platform device driver name is "max77693-muic", so advertise it properly in the modalias string. This fixes automated module loading when this driver is compiled as a module. Fixes: db1b9037424b ("extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05extcon: ptn5150: Fix usage of atomic GPIO with sleeping GPIO chipsKrzysztof Kozlowski
commit 6aaad58c872db062f7ea2761421ca748bd0931cc upstream. The driver uses atomic version of gpiod_set_value() without any real reason. It is called in a workqueue under mutex so it could sleep there. Changing it to "can_sleep" flavor allows to use the driver with all GPIO chips. Fixes: 4ed754de2d66 ("extcon: Add support for ptn5150 extcon driver") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Vijai Kumar K <vijaikumar.kanagarajan@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'Christophe JAILLET
[ Upstream commit bc84cff2c92ae5ccb2c37da73756e7174b1b430f ] In some error handling paths, a call to 'iio_channel_get()' is not balanced by a corresponding call to 'iio_channel_release()'. This can be achieved easily by using the devm_ variant of 'iio_channel_get()'. This has the extra benefit to simplify the remove function. Fixes: 19939860dcae ("extcon: adc_jack: adc-jack driver to support 3.5 pi or simliar devices") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-08extcon: axp288: Add wakeup supportHans de Goede
commit 9c94553099efb2ba873cbdddfd416a8a09d0e5f1 upstream. On devices with an AXP288, we need to wakeup from suspend when a charger is plugged in, so that we can do charger-type detection and so that the axp288-charger driver, which listens for our extcon events, can configure the input-current-limit accordingly. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-01extcon-intel-cht-wc: Don't reset USB data connection at probeYauhen Kharuzhy
[ Upstream commit e81b88932985c9134d410f4eaaaa9b81a3b4bd0c ] Intel Cherry Trail Whiskey Cove extcon driver connect USB data lines to PMIC at driver probing for further charger detection. This causes reset of USB data sessions and removing all devices from bus. If system was booted from Live CD or USB dongle, this makes system unusable. Check if USB ID pin is floating and re-route data lines in this case only, don't touch otherwise. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> [cw00.choi: Clean-up the minor coding style] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31extcon: sm5502: Reset registers during initializationStephan Gerhold
[ Upstream commit 6942635032cfd3e003e980d2dfa4e6323a3ce145 ] On some devices (e.g. Samsung Galaxy A5 (2015)), the bootloader seems to keep interrupts enabled for SM5502 when booting Linux. Changing the cable state (i.e. plugging in a cable) - until the driver is loaded - will therefore produce an interrupt that is never read. In this situation, the cable state will be stuck forever on the initial state because SM5502 stops sending interrupts. This can be avoided by clearing those pending interrupts after the driver has been loaded. One way to do this is to reset all registers to default state by writing to SM5502_REG_RESET. This ensures that we start from a clean state, with all interrupts disabled. Suggested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-19Merge tag 'tag-chrome-platform-for-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "CrOS EC / MFD Migration: - Move cros_ec core driver from mfd into chrome platform. Wilco EC: - Add batt_ppid_info command to Wilco telemetry driver. CrOS EC: - cros_ec_rpmsg : Add support to inform EC of suspend/resume status - cros_ec_rpmsg : Fix race condition on probe failed - cros_ec_chardev : Add a poll handler to receive MKBP events Misc: - bugfixes in cros_usbpd_logger and cros_ec_ishtp" * tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed platform/chrome: chromeos_tbmc: Report wake events mfd: cros_ec: Use mfd_add_hotplug_devices() helper mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper mfd / platform: cros_ec: Reorganize platform and mfd includes mfd / platform: cros_ec: Rename config to a better name mfd: cros_ec: Switch to use the new cros-ec-chardev driver mfd / platform: cros_ec: Miscellaneous character device to talk with the EC mfd / platform: cros_ec: Move cros-ec core driver out from MFD mfd / platform: cros_ec: Handle chained ECs as platform devices platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support platform/chrome: chromeos_laptop: drop checks of NULL-safe functions platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver
2019-09-02mfd / platform: cros_ec: Reorganize platform and mfd includesEnric Balletbo i Serra
There is a bit of mess between cros-ec mfd includes and platform includes. For example, we have a linux/mfd/cros_ec.h include that exports the interface implemented in platform/chrome/cros_ec_proto.c. Or we have a linux/mfd/cros_ec_commands.h file that is non related to the multifunction device (in the sense that is not exporting any function of the mfd device). This causes crossed includes between mfd and platform/chrome subsystems and makes the code difficult to read, apart from creating 'curious' situations where a platform/chrome driver includes a linux/mfd/cros_ec.h file just to get the exported functions that are implemented in another platform/chrome driver. In order to have a better separation on what the cros-ec multifunction driver does and what the cros-ec core provides move and rework the affected includes doing: - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c driver from include/linux/mfd/cros_ec.h to a new file include/linux/platform_data/cros_ec_proto.h - Update all the drivers with the new includes, so - Drivers that only need to know about the protocol include - linux/platform_data/cros_ec_proto.h - linux/platform_data/cros_ec_commands.h - Drivers that need to know about the cros-ec mfd device also include - linux/mfd/cros_ec.h Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Series changes: 3 - Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp) Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02mfd / platform: cros_ec: Move cros-ec core driver out from MFDEnric Balletbo i Serra
Now, the ChromeOS EC core driver has nothing related to an MFD device, so move that driver from the MFD subsystem to the platform/chrome subsystem. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-31extcon: adc-jack: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. Signed-off-by: Stephen Boyd <swboyd@chromium.org> [cw00.choi: Edit patch title and description for readability] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-29extcon: axp288: Use for_each_set_bit() in axp288_extcon_log_rsi()Andy Shevchenko
This simplifies and standardizes axp288_extcon_log_rsi() by using for_each_set_bit() library function. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-29extcon: axp288: Add missed error checkAndy Shevchenko
It seems from the very beginning the error check has been missed in axp288_extcon_log_rsi(). Add it here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24extcon: sm5502: Add IRQ_ONESHOTVasyl Gomonovych
Do not fire irq again until thread done Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24extcon: gpio: Request reasonable interruptsLinus Walleij
The only thing that makes sense is to request a falling edge interrupt if the line is active low and a rising edge interrupt if the line is active high, so just do that and get rid of the assignment from platform data. The GPIO descriptor knows if the line is active high or low. Also make irq a local variable in probe(), it's not used anywhere else. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [cw00.choi: Fix build error of data->irq_flags] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24extcon: fsa9480: Support the FSA880 variantLinus Walleij
The older compatible variant of this chip is called FSA880 and works the same way, if we need some quirks in the future, it is good to let it have its own compatible string. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24extcon: extcon-max77843: convert to i2c_new_dummy_deviceWolfram Sang
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24extcon: arizona: Switch to use device_property_count_u32()Andy Shevchenko
Use use device_property_count_u32() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-01Merge tag 'extcon-next-for-5.3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Update extcon for 5.3 Detailed description for this pull request: 1. Add new extcon-fsa9480 extcon provider driver - It is extcon provide driver for Fairchild Semiconductor FSA9480 microUSB switch and accessory detector chip which detects the kind of external connector like usb, charger, audio, video and so on. 2. - Add the exception handling code for extcon-arizona.c when using the regmap interface. * tag 'extcon-next-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: extcon: fsa9480: Fix Kconfig warning and build errors extcon: Add fsa9480 extcon driver dt-bindings: extcon: Add support for fsa9480 switch extcon: arizona: Correct error handling on regmap_update_bits_check
2019-06-26extcon: fsa9480: Fix Kconfig warning and build errorsRandy Dunlap
Fix Kconfig dependency warning and subsequent build errors caused by the Kconfig entry for EXTCON-FSA9480. It should not select REGMAP_I2C unless I2C is already set/enabled. WARNING: unmet direct dependencies detected for REGMAP_I2C Depends on [n]: I2C [=n] Selected by [y]: - EXTCON_FSA9480 [=y] && EXTCON [=y] && INPUT [=y] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> [cw00.choi: adjust the patch title and remove the long warning messages] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-06-22extcon: Add fsa9480 extcon driverTomasz Figa
This patch adds extcon driver for Fairchild Semiconductor FSA9480 microUSB switch. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 233Thomas Gleixner
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 6 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.720704315@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30extcon: arizona: Correct error handling on regmap_update_bits_checkCharles Keepax
Ensure the case when regmap_update_bits_check fails and the change variable is not updated is handled correctly. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge tag 'char-misc-5.2-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc update part 2 from Greg KH: "Here is the "real" big set of char/misc driver patches for 5.2-rc1 Loads of different driver subsystem stuff in here, all over the places: - thunderbolt driver updates - habanalabs driver updates - nvmem driver updates - extcon driver updates - intel_th driver updates - mei driver updates - coresight driver updates - soundwire driver cleanups and updates - fastrpc driver updates - other minor driver updates - chardev minor fixups Feels like this tree is getting to be a dumping ground of "small driver subsystems" these days. Which is fine with me, if it makes things easier for those subsystem maintainers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) intel_th: msu: Add current window tracking intel_th: msu: Add a sysfs attribute to trigger window switch intel_th: msu: Correct the block wrap detection intel_th: Add switch triggering support intel_th: gth: Factor out trace start/stop intel_th: msu: Factor out pipeline draining intel_th: msu: Switch over to scatterlist intel_th: msu: Replace open-coded list_{first,last,next}_entry variants intel_th: Only report useful IRQs to subdevices intel_th: msu: Start handling IRQs intel_th: pci: Use MSI interrupt signalling intel_th: Communicate IRQ via resource intel_th: Add "rtit" source device intel_th: Skip subdevices if their MMIO is missing intel_th: Rework resource passing between glue layers and core intel_th: SPDX-ify the documentation intel_th: msu: Fix single mode with IOMMU coresight: funnel: Support static funnel dt-bindings: arm: coresight: Unify funnel DT binding coresight: replicator: Add new device id for static replicator ...
2019-05-06Merge branches 'acpi-utils', 'acpi-video', 'acpi-soc' and 'acpi-button'Rafael J. Wysocki
* acpi-utils: gpio: merrifield: Fix build err without CONFIG_ACPI ACPI / utils: Remove deprecated function since no user left ASoC: Intel: cht_bsw_rt5672: Convert to use acpi_dev_get_first_match_dev() ASoC: Intel: cht_bsw_rt5645: Convert to use acpi_dev_get_first_match_dev() ASoC: Intel: bytcr_rt5651: Convert to use acpi_dev_get_first_match_dev() ASoC: Intel: bytcr_rt5640: Convert to use acpi_dev_get_first_match_dev() ASoC: Intel: bytcht_es8316: Convert to use acpi_dev_get_first_match_dev() ASoC: Intel: bytcht_da7213: Convert to use acpi_dev_get_first_match_dev() gpio: merrifield: Convert to use acpi_dev_get_first_match_dev() extcon: axp288: Convert to use acpi_dev_get_first_match_dev() ACPI / utils: Introduce acpi_dev_get_first_match_dev() helper * acpi-video: ACPI: video: Use vendor backlight on Sony VPCEH3U1E * acpi-soc: ACPI / LPSS: Use acpi_lpss_* instead of acpi_subsys_* functions for hibernate * acpi-button: ACPI: button: reinitialize button state upon resume
2019-04-12extcon: arizona: Disable mic detect if running when driver is removedCharles Keepax
Microphone detection provides the button detection features on the Arizona CODECs as such it will be running if the jack is currently inserted. If the driver is unbound whilst the jack is still inserted this will cause warnings from the regulator framework as the MICVDD regulator is put but was never disabled. Correct this by disabling microphone detection on driver removal and if the microphone detection was running disable the regulator and put the runtime reference that was currently held. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-04-12extcon: axp288: Add a depends on ACPI to the Kconfig entryYueHaibing
As Hans de Goede pointed, using this driver without ACPI makes little sense, so add ACPI dependency to Kconfig entry to fix a build error while CONFIG_ACPI is not set. drivers/extcon/extcon-axp288.c: In function 'axp288_extcon_probe': drivers/extcon/extcon-axp288.c:363:20: error: dereferencing pointer to incomplete type put_device(&adev->dev); Fixes: 0cf064db948a ("extcon: axp288: Convert to use acpi_dev_get_first_match_dev()") Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-04-05extcon: mrfld: Introduce extcon driver for Basin Cove PMICAndy Shevchenko
On Intel Merrifield the Basin Cove PMIC provides a feature to detect the USB connection type. This driver utilizes the feature in order to support the USB dual role detection. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-04-05extcon: intel: Split out some definitions to a common headerAndy Shevchenko
We are going to use some definitions in the other Intel extcon drivers, thus, split out them to a common header file. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-04-05extcon: Fix build warning for extcon_unregister_notifier commentValdis Klētnieks
Give the line the asterisk it wanted to fix the build warning. [Build warning message] Building with W=1 reports: CC drivers/extcon/devres.o drivers/extcon/devres.c:208: warning: bad line: - Resource-managed extcon_unregister_notifier() Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> [cw00.choi: Edit the patch subject and description] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-04-05extcon: intel-cht-wc: Enable external chargerYauhen Kharuzhy
In some configuration external charger "#charge enable" signal is connected to PMIC. Enable it at device probing to allow charging. Save CHGRCTRL0 and CHGDISCTR registers at driver probing and restore them at driver unbind to re-enable hardware charging control if it was enabled before. Tested at Lenovo Yoga Book (YB1-X91L). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-04-05extcon: intel-cht-wc: Make charger detection co-existed with OTG host modeYauhen Kharuzhy
Whiskey Cove Cherry Trail PMIC requires disabling OTG host mode before of charger detection procedure. Do this by manipulationg of CHGRCTRL1 register. Source: APCI DSDT code of Lenovo Yoga Book YB1-X91L and open-sourced Intel's drivers. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-04-05extcon: ptn5150: fix COMPILE_TEST dependenciesArnd Bergmann
The PTN5150 dependencies look like they were meant to do the right thing, but they actually should not allow building without I2C for compile testing, as that results in a Kconfig warning and subsequent build failure: WARNING: unmet direct dependencies detected for REGMAP_I2C Depends on [m]: I2C [=m] Selected by [y]: - EXTCON_PTN5150 [=y] && EXTCON [=y] && (I2C [=m] && GPIOLIB [=y] || COMPILE_TEST [=y]) Selected by [m]: - EEPROM_AT24 [=m] && I2C [=m] && SYSFS [=y] - KEYBOARD_CAP11XX [=m] && !UML && INPUT [=y] && INPUT_KEYBOARD [=y] && OF [=y] && I2C [=m] - INPUT_DRV260X_HAPTICS [=m] && !UML && INPUT_MISC [=y] && INPUT [=y] && I2C [=m] && (GPIOLIB [=y] || COMPILE_TEST [=y]) - ... [many others] Add parentheses around the expression so we can compile-test without GPIOLIB but not without I2C. Fixes: 4ed754de2d66 ("extcon: Add support for ptn5150 extcon driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-11 00:17:27 +0000