summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-it87.c
AgeCommit message (Collapse)Author
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 300Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program see the file copying if not write to the free software foundation 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141902.366626771@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-10gpio: it87: Add support for IT8613Leonid Bloch
This was tested on actual hardware and found to work fine, but currently the official specifications of this chip could not be obtained to confirm the numbers. Signed-off-by: Leonid Bloch <lbloch@janustech.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10gpio: it87: add support for IT8718F Super I/O.Ivan Podovalov
The DIO connector on the WAFER-945GSE is interfaced to GPIO ports on the ITE IT8718F Super I/O chipset. From the datasheet of ITE IT8718F, the GPIO interface is identical to IT8728, so just add it to the same case as the other chip. Signed-off-by: Ivan Podovalov <ipodovalov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-30gpio-it87: add support for IT8786E Super I/OVincent Prince
From the datasheet, the GPIO interface is identical to IT8728 (same description), so just add it to the same case as the other chip. Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19gpio: it87: Include the right headerLinus Walleij
This driver is a pure GPIO driver and should only include <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: it87: fix mojibake in module metadataAdam Borowski
It had twice-encoded Unicode. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: it87: add support for IT8772F Super I/O.Diego Elio Pettenò
From the datasheet, the GPIO interface is identical to IT8728 (same description), so just add it to the same case as the other chip. Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13gpio: constify gpio_chip structuresJulia Lawall
These structures are only used to copy into other structures, so declare them as const. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct gpio_chip i@p = { ... }; @ok@ identifier r.i; expression e; position p; @@ e = i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct gpio_chip e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct gpio_chip i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31gpio: gpio-it87: Add support for IT8620 and IT8628Martin Blumenstingl
These chips seem to have a 9th GPIO block (thus supporting 72 GPIOs) which is configured through SuperIO register 0xd2 (output enable) and 0xd3 (simple I/O). This is also the reason why io_size is larger than on IT8728 / IT8732. Unfortunately I don't have hardware to test this 9th GPIO block. I am also not sure about not configuring the Simple I/O registers as the hardware I have only uses GPIO block 8. Reading back the values of 0xc0-0xc7 (as configured by the BIOS/EFI on my board) shows that all have 0xff set. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: it87: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Diego Elio Pettenò <flameeyes@flameeyes.eu> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: add GPIO support for IT87xx, replacing gpio-it8761eDiego Elio Pettenò
This patch adds support for the GPIOs found on the ITE super-I/O chips IT87xx. Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu> Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>