summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2012-01-09ENGR00141391-2 PMIC: porting da9053 to i.mx platformZhou Jingyu
Fix da9053 backlight Kconfig error porting da9052 regulator driver Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com>
2012-01-09ENGR00141391-1 PMIC: Add DA9053 source code from DialogZhou Jingyu
Add DA9053 original source code Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com>
2011-07-15gpio: wm831x: add a missing break in wm831x_gpio_dbg_showAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-08gpio/langwell_gpio: ack the correct bit for langwell gpio interruptsMathias Nyman
The wrong bit was masked when acking langwell gpio interrupts. Reason for maskig the wrong bit was probably because__ffs() and ffs() functions return bit indexes differently (0..31 vs 1..32) This fixes langwell based devices from hanging when a gpio interrupt is triggered and undoes the breakage which occurred in change set 732063b92bb727b27e61580ce278dddefe31c6ad Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-05gpio: tps65910: add missing breaks in tps65910_gpio_initAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-16gpio/omap4: Fix missing interrupts during device wakeup due to IOPAD.Ambresh K
If gpio pins from bank[2-5] are marked as wakeup enable and if the wake is through gpio IO pad wakeup, then that wakeup gpio interrupt is lost. In the current implementation, GPIO driver stores the context of DATAIN of all the gpio in the bank. During GPIO resuming, it checks DATAIN with wakeup enabled pins of gpio bank. If there is status change, then manually toggle GPIO_LEVELDETECT to generate pseudo interrupt. Reported-by: Philippe Mazet <p-mazet@ti.com> Tested-by: Philippe Mazet <p-mazet@ti.com> Signed-off-by: Ambresh K <ambresh@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-09gpio/nomadik: fix sleepmode for elder NomadikLinus Walleij
The mach-nomadik machine did not compile properly due to bad ux500-specific functions being called. Introduce new state variables to fix this up. Reported-by: Axel Lin <axel.lin@gmail.com> Cc: Alessandro Rubini <rubini@unipv.it> Cc: Prafulla Wadaskar <prafulla.wadaskar@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-08Merge branch 'for_3.0/gpio-fixes' of ↵Grant Likely
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into gpio/merge
2011-06-07gpio/samsung: make Kconfig options def_boolH Hartley Sweeten
The Samsung GPIO drivers are always built-in when the relevant platform is selected.  Change the Kconfig symbol to def_bool y dependant on the platform. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-07gpio/exynos4: Fix incorrect mapping of gpio pull-up macro to register settingThomas Abraham
The S3C_GPIO_PULL_UP macro value incorrectly maps to a reserved setting of GPIO pull up/down registers on Exynos4 platform. Fix this incorrect mapping by adding wrappers to the s3c_gpio_setpull_updown and s3c_gpio_getpull_updown functions. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06GPIO: OMAP: add locking around calls to _set_gpio_triggeringColin Cross
_set_gpio_triggering uses read-modify-write on bank registers, lock bank->lock around all calls to it to prevent register corruption if two cpus access gpios in the same bank at the same time. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-06GPIO: OMAP: fix setting IRQWAKEN bits for OMAP4Colin Cross
Setting the IRQWAKEN bit was overwriting previous IRQWAKEN bits, causing only the last bit set to take effect, resulting in lost wakeups when the GPIO controller is in idle. Replace direct writes to IRQWAKEN with MOD_REG_BIT calls to perform a read-modify-write on the register. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-06GPIO: OMAP: fix section mismatch warningsRussell King
WARNING: arch/arm/plat-omap/built-in.o(.devinit.text+0x46c): Section mismatch in reference from the function omap_gpio_probe() to the function .init.text:omap_gpio_chip_init() The function __devinit omap_gpio_probe() references a function __init omap_gpio_chip_init(). If omap_gpio_chip_init is only used by omap_gpio_probe then annotate omap_gpio_chip_init with a matching annotation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-29gpio: Fix gpio-exynos4 build fails in mainlineKyungmin Park
After the GPIO driver move, some symbols became selectable when they shouldn't be. Tighten the dependencies. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-29arm gpio drivers: make them 'depends on ARM'Linus Torvalds
We had a few drivers move from arch/arm into drivers/gpio, but they don't actually compile without the ARM platform headers etc. As a result they were messing up allyesconfig on x86. Make them depend on ARM. Reported-by: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-28Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: gpio/pch_gpio: Support new device ML7223 gpio: make gpio_{request,free}_array gpio array parameter const GPIO: OMAP: move to drivers/gpio GPIO: OMAP: move register offset defines into <plat/gpio.h> gpio: Convert gpio_is_valid to return bool gpio: Move the s5pc100 GPIO to drivers/gpio gpio: Move the s5pv210 GPIO to drivers/gpio gpio: Move the exynos4 GPIO to drivers/gpio gpio: Move to Samsung common GPIO library to drivers/gpio gpio/nomadik: add function to read GPIO pull down status gpio/nomadik: show all pins in debug gpio: move Nomadik GPIO driver to drivers/gpio gpio: move U300 GPIO driver to drivers/gpio langwell_gpio: add runtime pm support gpio/pca953x: Add support for pca9574 and pca9575 devices gpio/cs5535: Show explicit dependency between gpio_cs5535 and mfd_cs5535
2011-05-27Merge branch 'for_2.6.40/gpio-move' of ↵Grant Likely
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into gpio/next
2011-05-27gpio/pch_gpio: Support new device ML7223Tomoya MORINAGA
Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub). The ML7223 IOH is for MP(Media Phone) use. The ML7223 is companion chip for Intel Atom E6xx series. The ML7223 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-27gpio: make gpio_{request,free}_array gpio array parameter constLars-Peter Clausen
gpio_{request,free}_array should not (and do not) modify the passed gpio array, so make the parameter const. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-27GPIO: OMAP: move to drivers/gpioKevin Hilman
Move OMAP GPIO driver to drivers/gpio. Builds whenever CONFIG_ARCH_OMAP=y. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-05-27TPS65911: Add support for added GPIO linesJorge Eduardo Candelaria
GPIO 1 to 8 are added for TPS65911 chip version. The gpio driver now handles more than one gpio lines. Subsequent versions of the chip family can add new GPIO lines with minimal driver changes. Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27GPIO: TPS65910: Move driver to drivers/gpio/Jorge Eduardo Candelaria
The GPIO driver should reside in drivers/gpio/ for better organization. Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-26gpio: Move the s5pc100 GPIO to drivers/gpioKyungmin Park
Move the Samsung s5pc100 SoC GPIO driver to drivers/gpio Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio: Move the s5pv210 GPIO to drivers/gpioKyungmin Park
Move the Samsung s5pv210 SoC GPIO driver to drivers/gpio Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio: Move the exynos4 GPIO to drivers/gpioKyungmin Park
Move the Samsung Exynos4 series SoCs GPIO driver to drivers/gpio Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio: Move to Samsung common GPIO library to drivers/gpioKyungmin Park
It's common gpiolib for recent Samsung SoCs. Move to drivers/gpio Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio/nomadik: add function to read GPIO pull down statusRickard Andersson
Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Martin Persson <martin.persson@stericsson.com> [Split off from larger patch] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio/nomadik: show all pins in debugRabin Vincent
Useful to check the status of the runtime pin muxing. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> [Squashed, modified to use chip-internal IRQ trigger state] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio: move Nomadik GPIO driver to drivers/gpioGrant Likely
This moves the Nomadik GPIO driver out of arch/arm/plat-nomadik and into the desired location indicated by the subsystem maintainer. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [grant.likely: squashed with kconfig fixup] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio: move U300 GPIO driver to drivers/gpioLinus Walleij
This moves the U300 GPIO driver out of arch/arm/mach-u300 and into the desired location indicated by the subsystem maintainer. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26langwell_gpio: add runtime pm supportKristen Carlson Accardi
While this is essentially a no-op for this driver, it has the side effect of letting the PMU driver snoop D3 requests from the PCI core for this driver. This is only for langwell, not for whitney point. Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio/pca953x: Add support for pca9574 and pca9575 devicesHaojian Zhuang
PCA957x is i2c gpio expander, and similar to PCA953x. Although register configurations are different between PCA957x and PCA953x. They can share a lot of components, such as IRQ handling, GPIO IN/OUT. So updating PCA953x driver to support PCA957x chips. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio/cs5535: Show explicit dependency between gpio_cs5535 and mfd_cs5535Ed Wildgoose
cs5535-gpio.c has been split into two, with various setup moved into cs5535-mfd.c. Given that cs5535-gpio will not load without the -mfd part, lets make that dependency explicit in Kconfig Signed-off-by: Ed Wildgoose <kernel@wildgooses.com> Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: gpio/via: rename VIA local config struct basic_mmio_gpio: split into a gpio library and platform device gpio: remove some legacy comments in build files gpio: add trace events for setting direction and value gpio/pca953x: Use handle_simple_irq instead of handle_edge_irq gpiolib: export gpiochip_find gpio: remove redundant Kconfig depends on GPIOLIB basic_mmio_gpio: convert to non-__raw* accessors basic_mmio_gpio: support direction registers basic_mmio_gpio: support different input/output registers basic_mmio_gpio: detect output method at probe time basic_mmio_gpio: request register regions basic_mmio_gpio: allow overriding number of gpio basic_mmio_gpio: convert to platform_{get,set}_drvdata() basic_mmio_gpio: remove runtime width/endianness evaluation
2011-05-26mfd: Use mfd cell platform_data for janz cells platform bitsSamuel Ortiz
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for rdc321x cells platform bitsSamuel Ortiz
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for timberdale cells platform bitsSamuel Ortiz
With the addition of a device platform mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Acked-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-25drivers/gpio/ml_ioh_gpio.c needs slab.hAndrew Morton
alpha allmodconfig: drivers/gpio/ml_ioh_gpio.c: In function 'ioh_gpio_probe': drivers/gpio/ml_ioh_gpio.c:205: error: implicit declaration of function 'kzalloc' drivers/gpio/ml_ioh_gpio.c:205: warning: assignment makes pointer from integer without a cast also fix this: drivers/gpio/ml_ioh_gpio.c:145: warning: 'ioh_gpio_save_reg_conf' defined but not used drivers/gpio/ml_ioh_gpio.c:154: warning: 'ioh_gpio_restore_reg_conf' defined but not used Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25drivers/gpio/vx855_gpio.c needs slab.hAndrew Morton
alpha allmodconfig: drivers/gpio/vx855_gpio.c: In function 'vx855gpio_probe': drivers/gpio/vx855_gpio.c:233: error: implicit declaration of function 'kzalloc' drivers/gpio/vx855_gpio.c:233: warning: assignment makes pointer from integer without a cast Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-20basic_mmio_gpio: split into a gpio library and platform deviceJamie Iles
Allow GPIO_BASIC_MMIO_CORE to be used to provide an accessor library for implementing GPIO drivers whilst abstracting the register access detail. Based on a patch from Anton Vorontsov[1] and adapted to allow bgpio_chip to be embedded in another structure. Changes since v1: - Register the gpio_chip in the platform device probe 1. https://lkml.org/lkml/2011/4/19/401 Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-20gpio: remove some legacy comments in build filesLinus Walleij
The build files for drivers/gpio has some wording and comments about the directory being reserved exclusively for GPIO expanders (according to the gpio.txt file these are on external busses) and this has been false for some time. We already have PL061 and Xilinx drivers which are in silicon and now I'm moving more silicon drivers here, so delete this and reword it a bit. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-20gpio: add trace events for setting direction and valueUwe Kleine-König
This patch allows to trace gpio operations using ftrace Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-20gpio/pca953x: Use handle_simple_irq instead of handle_edge_irqErik Botö
Make pca953x driver use the simple irq handler since no hardware control is necessary and the driver lacks an irq_ack function. handle_edge_irq() calls chip->irq_ack() which crashes since this function does not exist. Signed-off-by: Erik Botö <erik.boto@pelagicore.com> Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-20gpiolib: export gpiochip_findJean Delvare
Export function gpiochip_find so that modules can use it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-20gpio: remove redundant Kconfig depends on GPIOLIBH Hartley Sweeten
Since all the drivers are in a 'if GPIOLIB/endif block', the depends on GPIOLIB is redundant so remove them. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-20basic_mmio_gpio: convert to non-__raw* accessorsJamie Iles
The __raw_* accessors don't include memory barriers and can cause problems when writes get stuck in write buffers. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-20basic_mmio_gpio: support direction registersJamie Iles
Most controllers require the direction of a GPIO to be set by writing to a direction register. Add support for either an input direction register or an output direction register. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-20basic_mmio_gpio: support different input/output registersJamie Iles
Some controllers have separate input and output registers. For these controllers, use "set" for the output and "dat" for the input. Changes since v2: reuse "set" for output and "dat" for input rather than adding a new "in" register. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-20basic_mmio_gpio: detect output method at probe timeJamie Iles
Rather than detecting the output method each time in the .set() callback, do it at probe time and set the appropriate callback. Changes since v2: moved the reg_dat initialization into bgpio_setup_io(). Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-20basic_mmio_gpio: request register regionsJamie Iles
Make sure that we get the register regions with request_mem_region() before ioremap() to make sure we have exclusive access. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 20:24:16 +0000