summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2011-04-11Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: dt/fsldma: fix build warning caused by of_platform_device changes spi: Fix race condition in stop_queue() gpio/pch_gpio: Fix output value of pch_gpio_direction_output() gpio/ml_ioh_gpio: Fix output value of ioh_gpio_direction_output() gpio/pca953x: fix error handling path in probe() call
2011-03-31gpio/pch_gpio: Fix output value of pch_gpio_direction_output()Peter Tyser
The pch_gpio_direction_output() function was missing a write to set the desired output value. The function would properly set the GPIO direction, but not the output value. The value would have to manually be set with a follow up call to pch_gpio_set(). Add the missing write so that pch_gpio_direction_output() sets both the GPIO direction and value. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-31gpio/ml_ioh_gpio: Fix output value of ioh_gpio_direction_output()Peter Tyser
The ioh_gpio_direction_output() function was missing a write to set the desired output value. The function would properly set the GPIO direction, but not the output value. The value would have to manually be set with a follow up call to ioh_gpio_set(). Add the missing write so that ioh_gpio_direction_output() sets both the GPIO direction and value. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-30gpio/pca953x: fix error handling path in probe() callBen Dooks
If the device fails to respond, then the error path tries to remove an interrupt that never got registered, which causes an backtrace from the interrupt handling code. Fix this by ensuring that the cleanup path has two labels and use the correct path as needed. fixes the following error: WARNING: at kernel/irq/manage.c:908 __free_irq+0x80/0x160() Trying to free already-free IRQ 0 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-29gpio: ab8500: Mark brokenThomas Gleixner
This driver is broken in several aspects. 1) old style irq_chip functions. Sigh 2) Abuse of the unlock callback. That's not supposed to be a state machine for evrything and some more. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28gpio: driver for 42 AB8500 GPIO pinsBibek Basu
To get rid of port expanders, the free GPIOs of ab8500 can be used. There are 42 GPIO pins. Out of which 16 are interrupt capable.This patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> [Renamed header file as per MFD structure] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-25Merge branch 'irq-cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (23 commits) genirq: Expand generic show_interrupts() gpio: Fold irq_set_chip/irq_set_handler to irq_set_chip_and_handler gpio: Cleanup genirq namespace arm: ep93xx: Add basic interrupt info arm/gpio: Remove three copies of broken and racy debug code xtensa: Use generic show_interrupts() xtensa: Convert genirq namespace xtensa: Use generic IRQ Kconfig and set GENERIC_HARDIRQS_NO_DEPRECATED xtensa: Convert s6000 gpio irq_chip to new functions xtensa: Convert main irq_chip to new functions um: Use generic show_interrupts() um: Convert genirq namespace m32r: Use generic show_interrupts() m32r: Convert genirq namespace h8300: Use generic show_interrupts() h8300: Convert genirq namespace avr32: Cleanup eic_set_irq_type() avr32: Use generic show_interrupts() avr: Cleanup genirq namespace avr32: Use generic IRQ config, enable GENERIC_HARDIRQS_NO_DEPRECATED ... Fix up trivial conflict in drivers/gpio/timbgpio.c
2011-03-25gpio: Fold irq_set_chip/irq_set_handler to irq_set_chip_and_handlerThomas Gleixner
Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> LKML-Reference: <20110324212509.118888535@linutronix.de>
2011-03-25gpio: Cleanup genirq namespaceThomas Gleixner
Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> LKML-Reference: <20110324212509.025730689@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25arm/gpio: Remove three copies of broken and racy debug codeThomas Gleixner
gpiolib plus two gpio implementations in arm fiddle in the guts of irq_desc in a racy and buggy way. Remove the stuff. I already told the gpio folks that we can provide that information in a proper way if necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> LKML-Reference: <20110324212508.931638262@linutronix.de>
2011-03-23gpio: Add Tunnel Creek support to sch_gpioDenis Turischev
Almost the same driver for both Poulsbo and Tunnel Creek. The difference is in quantity of GPIOs powered by the core power rail and by suspend power supply, default values for some GPIOs, etc. Detect actual hardware by platform device ID assigned in lpc_sch and set configuration accordingly. Signed-off-by: Denis Turischev <denis@compulab.co.il> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23rdc321x-southbridge: Use mfd_data instead of driver_dataAndres Salomon
Use mfd_data for passing information from mfd drivers to soc clients. The mfd_cell's driver_data field is being phased out. Clients that were using driver_data now access .mfd_data via mfd_get_data(). Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: mfd_cell is now implicitly available to janz driversAndres Salomon
The cell's platform_data is now accessed with a helper function; change clients to use that, and remove the now-unused data_size. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: mfd_cell is now implicitly available to timberdale driversAndres Salomon
The cell's platform_data is now accessed with a helper function; change clients to use that, and remove the now-unused data_size. Note that the mfd's platform_data is marked __devinitdata. This is still correct in all cases except for the timbgpio driver, whose remove hook has been changed to no longer reference the pdata. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-18Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: (34 commits) spi/dw_spi: move dw_spi.h into drivers/spi spi/dw_spi: Fix missing header gpio/langwell: Clear edge bit before handling gpio/langwell: Simplify demux loop gpio/langwell: Convert irq name space gpio/langwell: Fix broken irq_eoi change. gpio; Make Intel chipset gpio drivers depend on x86 gpio/cs5535-gpio: Fix section mismatch spi/rtc-{ds1390,ds3234,m41t94}: Use spi_get_drvdata() for SPI devices spi/davinci: Support DMA transfers larger than 65535 words spi/davinci: Use correct length parameter to dma_map_single calls gpio: Use __devexit at necessary places gpio: add MODULE_DEVICE_TABLE to pch_gpio and ml_ioh_gpio gpio/mcp23s08: support mcp23s17 variant of_mmc_spi: add card detect irq support spi/omap_mcspi: catch xfers of non-multiple SPI word size spi/omap_mcspi: Off-by-one error in finding the right divisor gpio/pca953x: Fix wrong pointer type spi/pl022: rid dangling labels spi: add support for SuperH SPI ...
2011-03-17gpio/langwell: Clear edge bit before handlingThomas Gleixner
I don't have the specs for this beast, but it looks a lot like the PXA GPIO block. Though I bet it's the same IP and the driver should have reused the PXA code. Acknowleding the edge detect status after handling one or more gpio interrupts looks wrong. We might lose an edge which came in while we handled the previous one. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Alek Du <alek.du@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-17Merge branches 'defcfg', 'drivers' and 'cyberpro-next' of ↵Linus Torvalds
master.kernel.org:/home/rmk/linux-2.6-arm * 'defcfg' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6647/1: add Versatile Express defconfig ARM: 6644/1: mach-ux500: update the U8500 defconfig * 'drivers' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6764/1: pl011: factor out FIFO to TTY code ARM: 6763/1: pl011: add optional RX DMA to PL011 v2 ARM: 6758/1: amba: support pm ops ARM: amba: make amba_driver id_table const ARM: amba: make internal ID table handling const ARM: amba: make probe() functions take const id tables ARM: 6662/1: amba: make amba_bustype non-static ARM: mmci: add dmaengine-based DMA support ARM: mmci: no need for separate host->data_xfered ARM: mmci: avoid unnecessary switch to data available PIO interrupts ARM: mmci: no need to call flush_dcache_page() with sg_miter API ARM: mmci: avoid reporting too many completed bytes on fifo overrun ALSA: AACI: make fifo variables more explanitory ALSA: AACI: no need to call snd_pcm_period_elapsed() for each period ALSA: AACI: use snd_pcm_lib_period_bytes() ALSA: AACI: clean up AACI announcement printk ALSA: AACI: fix channel mask selection ALSA: AACI: fix number of channels for record ALSA: AACI: fix multiple IRQ claiming * 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm: VIDEO: cyberpro: remove unused cyber2000fb_get_fb_var() VIDEO: cyberpro: remove useless function extreg pointers VIDEO: cyberpro: update handling of device structures VIDEO: cyberpro: add support for video capture I2C VIDEO: cyberpro: make 'reg_b0_lock' always present VIDEO: cyberpro: add I2C support VIDEO: cyberpro: select lowest multipler/divisor for PLL
2011-03-17gpio/langwell: Simplify demux loopThomas Gleixner
Use __ffs() to find the pending interrupt source instead of looping 32 times. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Alek Du <alek.du@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-17gpio/langwell: Convert irq name spaceThomas Gleixner
Convert to the new irq function names. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Alek Du <alek.du@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-17gpio/langwell: Fix broken irq_eoi change.Thomas Gleixner
commit 0766d20fd (langwell_gpio: modify EOI handling following change of kernel irq subsystem) changes - desc->chip->eoi(irq); + + if (desc->chip->irq_eoi) + desc->chip->irq_eoi(irq_get_irq_data(irq)); + else + dev_warn(pg->chip.dev, "missing EOI handler for irq %d\n", irq); With the following explanation: "Latest kernel has many changes in IRQ subsystem and its interfaces, like adding irq_eoi" for struct irq_chip, this patch will make it support both the new and old interface." This is completely bogus. #1) The changelog does not match the patch at all #2) This driver relies on the assumption that it sits behind an eoi capable interrupt line. If the implementation of the underlying chip changes from eoi to irq_eoi then this driver has to follow that change and not add a total bogosity. #3) Just mechanically changing eoi to irq_eoi without checking the background of that change is sloppy at best. Remove the sillyness and retrieve the interrupt data from irq_desc directly. No need to go through a sparse irq lookup. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Alek Du <alek.du@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-17gpio; Make Intel chipset gpio drivers depend on x86Thomas Gleixner
Nothing outside of x86 can use that code. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-17gpio/cs5535-gpio: Fix section mismatchNikanth Karthikesan
Fix section mismatch by annotating using variable name suffix. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-13gpio: add MODULE_DEVICE_TABLEAxel Lin
The device table is required to load modules based on modaliases. After adding MODULE_DEVICE_TABLE, below entries will be added to modules.pcimap: pch_gpio 0x00008086 0x00008803 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0 ml_ioh_gpio 0x000010db 0x0000802e 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0 Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-12gpio: Use __devexit at necessary placesAxel Lin
The function gen_74x164_remove and mc33880_remove are used only wrapped by __devexit_p so define it using __devexit. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-12gpio: add MODULE_DEVICE_TABLE to pch_gpio and ml_ioh_gpioAxel Lin
The device table is required to load modules based on modaliases. After adding MODULE_DEVICE_TABLE, below entries will be added to modules.pcimap: pch_gpio 0x00008086 0x00008803 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0 ml_ioh_gpio 0x000010db 0x0000802e 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-12gpio/mcp23s08: support mcp23s17 variantPeter Korsgaard
mpc23s17 is very similar to the mcp23s08, except that registers are 16bit wide, so extend the interface to work with both variants. The s17 variant also has an additional address pin, so adjust platform data structure to support up to 8 devices per SPI chipselect. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-12Merge commit 'v2.6.38-rc8' into spi/nextGrant Likely
Conflicts: drivers/spi/pxa2xx_spi_pci.c
2011-02-24gpio/pca953x: Fix wrong pointer typeDirk Eibach
pca953x_get_alt_pdata() uses uint16_t* as result type for of_get_property(), but numeric of values are __be32. Checking for negative values is bogus because of-property values are unsigned by definition. Instead check for proper property size. v3: - assume big-endian properties - check property size v2: - removed bogus check for negative property values Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23ARM: amba: make probe() functions take const id tablesRussell King
Make Primecell driver probe functions take a const pointer to their ID tables. Drivers should never modify their ID tables in their probe handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-22gpio/sx150x: Do not access I2C from mask/unmask functionsThomas Gleixner
irq_chip->irq_mask/unmask are called with interrupts disabled and irq_desc->lock held. So we cannot access i2c from this context. That's what irq_bus_sync_unlock() is for. Store the masked information in the chip data structure and update the i2c bus from the irq_bus_sync_unlock() callback. This does not need a while(pending) loop because the update to this is always serialized via the bus lock, so we never have more than one pin update pending. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Gregory Bean <gbean@codeaurora.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-11drivers/gpio/pca953x.c: add a mutex to fix race conditionRoland Stigge
Add a mutex to register communication and handling. Without the mutex, GPIOs didn't switch as expected when toggled in a fast sequence of status changes of multiple outputs. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Marc Zyngier <maz@misterjones.org> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-26langwell_gpio: modify EOI handling following change of kernel irq subsystemFeng Tang
Latest kernel has many changes in IRQ subsystem and its interfaces, like adding "irq_eoi" for struct irq_chip, this patch is a follow up change for that. Also remove the unnecessary cast for a "void *". Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Alek Du <alek.du@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) mfd: ab8500-core chip version cut 2.0 support mfd: Flag WM831x /IRQ as a wake source mfd: Convert WM831x away from legacy I2C PM operations regulator: Support MAX8998/LP3974 DVS-GPIO mfd: Support LP3974 RTC i2c: Convert SCx200 driver from using raw PCI to platform device x86: OLPC: convert olpc-xo1 driver from pci device to platform device mfd: MAX8998/LP3974 hibernation support mfd/ab8500: remove spi support mfd: Remove ARCH_U8500 dependency from AB8500 misc: Make AB8500_PWM driver depend on U8500 due to PWM breakage mfd: Add __devexit annotation for vx855_remove mfd: twl6030 irq_data conversion. gpio: Fix cs5535 printk warnings misc: Fix cs5535 printk warnings mfd: Convert Wolfson MFD drivers to use irq_data accessor function mfd: Convert TWL4030 to new irq_ APIs mfd: Convert tps6586x driver to new irq_ API mfd: Convert tc6393xb driver to new irq_ APIs mfd: Convert t7166xb driver to new irq_ API ...
2011-01-14gpio: timbgpio: Fix up irq_data conversion breakage.Lennert Buytenhek
Commit a1f5f22adc3206c47e70652c12671666c65b579f ("gpio: timbgpio: irq_data conversion") was slightly too enthusiastic in converting timbgpio_irq() over to take an irq_data * argument instead of an unsigned int irq argument, as it is a flow handler, which still take IRQ numbers for now. (And on top of that, it was using the wrong accessors.) This fixes it up, and seems to build without warnings. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Richard Röjfors <richard.rojfors@mocean-labs.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14gpio: Fix cs5535 printk warningsJoe Perches
drivers/gpio/cs5535-gpio.c: In function 'cs5535_gpio_probe': drivers/gpio/cs5535-gpio.c:269: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t' drivers/gpio/cs5535-gpio.c:269: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t' Use vsprintf extension %pR to format resource. Original-patch-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14gpio/misc: Add MODULE_ALIAS entries for CS5535 functionsAndres Salomon
This adds MODULE_ALIAS entries to the various cs5535 subdevice modules; this allows the modules to automatically be loaded when cs5535-mfd loads. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14gpio: Convert cs5535 from pci device to platform deviceAndres Salomon
The cs5535-mfd driver now takes care of the PCI BAR handling; this simplifies the gpio driver a lot. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (348 commits) ALSA: hda - Fix NULL-derefence with a single mic in STAC auto-mic detection ALSA: hda - Add missing NID 0x19 fixup for Sony VAIO ALSA: hda - Fix ALC275 enable hardware EQ for SONY VAIO ALSA: oxygen: fix Xonar DG input ALSA: hda - Fix EAPD on Lenovo NB ALC269 to low ALSA: hda - Fix missing EAPD for Acer 4930G ALSA: hda: Disable 4/6 channels on some NVIDIA GPUs. ALSA: hda - Add static_hdmi_pcm option to HDMI codec parser ALSA: hda - Don't refer ELD when unplugged ASoC: tpa6130a2: Fix compiler warning ASoC: tlv320dac33: Add DAPM selection for LOM invert ASoC: DMIC codec: Adding a generic DMIC codec ALSA: snd-usb-us122l: Fix missing NULL checks ALSA: snd-usb-us122l: Fix MIDI output ASoC: soc-cache: Fix invalid memory access during snd_soc_lzo_cache_sync() ASoC: Fix section mismatch in wm8995.c ALSA: oxygen: add S/PDIF source selection for Claro cards ALSA: oxygen: fix CD/MIDI for X-Meridian (2G) ASoC: fix migor audio build ALSA: include delay.h for msleep in Xonar DG support ...
2011-01-13gpio/ml_ioh_gpio: ML7213 GPIO driverTomoya MORINAGA
ML7213 is a companion chip for Intel Atom E6xx series. This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output Hub) which is for IVI(In-Vehicle Infotainment) use. This driver can access the IOH's GPIO device. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Marc Zyngier <maz@misterjones.org> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13GPIO_VX855: eliminate kconfig dependency warningRandy Dunlap
Fix kconfig dependency warning to satisfy dependencies: warning: (GPIO_VX855 && GPIOLIB) selects MFD_VX855 which has unmet direct dependencies (MFD_SUPPORT && PCI) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13GPIO_RDC321X: select MFD_SUPPORT to squelch kconfig warningRandy Dunlap
Fix kconfig dependency warning to satisfy dependencies: warning: (GPIO_RDC321X && PCI && GPIOLIB) selects MFD_RDC321X which has unmet direct dependencies (MFD_SUPPORT && PCI) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: vr41xx_giu: irq_data conversionLennert Buytenhek
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Cc: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: timbgpio: irq_data conversionLennert Buytenhek
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Cc: Richard Röjfors <richard.rojfors@mocean-labs.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: tc35892-gpio: irq_data conversionLennert Buytenhek
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: sx150x: irq_data conversionLennert Buytenhek
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Cc: Gregory Bean <gbean@codeaurora.org> Tested-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: stmpe-gpio: irq_data conversionLennert Buytenhek
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Luotao Fu <l.fu@pengutronix.de> Cc: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: pl061: irq_data conversionLennert Buytenhek
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: pca953x: irq_data conversionLennert Buytenhek
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Cc: Alek Du <alek.du@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13gpio: max732x: irq_data conversionLennert Buytenhek
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Marc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>