summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2013-12-20gpio: moxart: add missing .owner to struct gpio_chipWei Yongjun
Add missing .owner of struct gpio_chip. This prevents the module from being removed from underneath its users. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20gpio: add GPIO support for SMSC SCH311xBruno Randolf
This patch adds support for the GPIOs found on the SMSC "Super I/ SCH311x. The chip detection and I/O functions are copied from sch311x_wdt. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12gpio / ACPI: return -ENOENT when no mapping existsMika Westerberg
Doing this allows drivers to distinguish between a real error case (if there was an error when we tried to resolve the GPIO) and when the optional GPIO line was not available. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12gpio: msm: Add module device table and mark table constStephen Boyd
This allows the module to be loaded automatically. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12gpiolib: return -ENOENT if no GPIO mapping existsAlexandre Courbot
Some devices drivers make use of optional GPIO parameters. For such drivers, it is important to discriminate between the case where no GPIO mapping has been defined for the function they are requesting, and the case where a mapping exists but an error occured while resolving it or when acquiring the GPIO. This patch changes the family of gpiod_get() functions such that they will return -ENOENT if and only if no GPIO mapping is defined for the requested function. Other error codes are used when an actual error occured during the GPIO resolution. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12gpio: driver for Xtensa GPIO32Baruch Siach
GPIO32 is a standard optional extension to the Xtensa architecture core that provides preconfigured output and input ports for intra SoC signaling. The GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE) output state called EXPSTATE, and 32bit input wire called IMPWIRE. This driver treats input and output states as two distinct devices. v3: * Use BUG() in xtensa_impwire_set_value() to indicate that it should never be called (Linus Walleij) v2: * Address the comments of Linus Walleij: - Add a few comments - Expand commit log message - Use the BIT() macro for bit offsets - Rewrite CPENABLE handling as static inlines - Use device_initcall() * Depend on !SMP for reason explained in the comments (Marc Gauthier) * Use XCHAL_CP_ID_XTIOP to enable/disable GPIO32 only Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12gpio: 74x164: Driver cleanupAlexander Shiyan
- Removed excess "spi" field from private data. - Removed excess check for spi_get_drvdata() in remove(). - Removed unneeded message in remove(). - Simplify error path in probe(). - Fixed warnings by scripts/checkfile.pl. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12gpio: 74x164: Remove non-DT supportAlexander Shiyan
Commit 20bc4d5d565159eb2b942bf4b7fae86fba94e32c (gpio: 74x164: Add support for the daisy-chaining) introduce check for DT for the driver, so driver cannot be used without DT. There are no in-tree users of this driver, so remove non-DT support completely. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-11gpio: tegra: add missing error handling to probeStephen Warren
The call to gpiochip_add() is not currently error-checked. Add the missing checking. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-09gpiolib: update inline documentation of gpiod_get_index()Andy Shevchenko
The patch just accents that @dev could be NULL. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-09gpiolib: introduce chip_* to print with chip->label prefixAndy Shevchenko
In several places we are printing messages with prefix based on chip->label. Introduced macros help us to do this easier and in uniform way. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-09gpiolib: unify pr_* messages formatAndy Shevchenko
This patch includes the following amendments: 1) use "?" as a label when the last one is not defined in gpiod_*; 2) whenever it's possible gpiod_* are used; 3) print a function name, if it's already used in other messages. Additionally it fixes an indentation in few places. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-09gpio: better lookup method for platform GPIOsAlexandre Courbot
Change the format of the platform GPIO lookup tables to make them less confusing and improve lookup efficiency. The previous format was a single linked-list that required to compare the device name and function ID of every single GPIO defined for each lookup. Switch that to a list of per-device tables, so that the lookup can be done in two steps, omitting the GPIOs that are not relevant for a particular device. The matching rules are now defined as follows: - The device name must match *exactly*, and can be NULL for GPIOs not assigned to a particular device, - If the function ID in the lookup table is NULL, the con_id argument of gpiod_get() will not be used for lookup. However, if it is defined, it must match exactly. - The index must always match. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-09Merge tag 'v3.13-rc3' into develLinus Walleij
Linux 3.13-rc3
2013-12-04Merge branch 'mark-irqs' into develLinus Walleij
Conflicts: drivers/gpio/gpio-em.c
2013-12-04gpio: lynxpoint: lock IRQs when starting themLinus Walleij
This uses the new API for tagging GPIO lines as in use by IRQs. This enforces a few semantic checks on how the underlying GPIO line is used. Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-04gpio: intel-mid: lock IRQs when starting themLinus Walleij
This uses the new API for tagging GPIO lines as in use by IRQs. This enforces a few semantic checks on how the underlying GPIO line is used. ChangeLog v1->v2: - Explicitly call the - empty - mask/unmask functions from the startup/shutdown hooks. These are currently empty, but maybe they will not be that forever, so better be safe than sorry. Acked-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-04gpio: em: lock IRQs when starting themLinus Walleij
This uses the new API for tagging GPIO lines as in use by IRQs. This enforces a few semantic checks on how the underlying GPIO line is used. Also assign the gpio_chip.dev pointer to be used for error messages. ChangeLog v1->v2: - Satisfy implicit semantics by calling .enable and .disable callbacks in the startup/shutdown callbacks. Cc: Ian Molton <ian.molton@codethink.co.uk> Cc: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-04gpio: bcm-kona: lock IRQs when starting themLinus Walleij
This uses the new API for tagging GPIO lines as in use by IRQs. This enforces a few semantic checks on how the underlying GPIO line is used. Cc: Christian Daudt <csd@broadcom.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Tested-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-04gpio: lock adnp IRQs when enabling themLinus Walleij
This uses the new API for tagging GPIO lines as in use by IRQs. This enforces a few semantic checks on how the underlying GPIO line is used. Only compile tested on the lpc32xx. ChangeLog v2->v3: - Switch to using the startup()/shutdown() callbacks again. Still satisfy the mask/unmask semantics. ChangeLog v1->v2: - Use the .enable() callback from the irq_chip - Call .unmask() from the .enable() callback to satisfy semantics. Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-04gpio/pinctrl: make gpio_chip members typed booleanLinus Walleij
This switches the two members of struct gpio_chip that were defined as unsigned foo:1 to bool, because that is indeed what they are. Switch all users in the gpio and pinctrl subsystems to assign these values with true/false instead of 0/1. The users outside these subsystems will survive since true/false is 1/0, atleast we set some kind of more strict typing example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-04gpio: rewrite gpiochip_offset_to_desc()Alexandre Courbot
gpiochip_offset_to_desc() was using gpio_to_desc(), which directly addresses the global GPIO array we are hoping to get rid of someday. Reimplement it using the descriptor array of the chip itself, after checking the requested offset is within the valid bounds of the chip. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-04gpio: MOXA ART: rename moxart_gpio_base to baseJonas Jensen
Renaming "moxart_gpio_base" to "base" allows better fit, remove line breaks in moxart_gpio_get(). While doing trivial cleanup, also remove fields initialized with zero in moxart_template_chip. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpio: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpiolib: change a warning to debug message when failing to get gpiogpio-v3.13-3Heikki Krogerus
It's the drivers responsibility to react on failure to get the gpio descriptors and not the frameworks. Since there are some common peripherals that may or may not have certain pins connected to gpio lines, depending on the platform, printing the warning there may end up generating useless bug reports. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03powerpc/gpio: Fix the wrong GPIO input data on MPC8572/MPC8536Liu Gang
For MPC8572/MPC8536, the status of GPIOs defined as output cannot be determined by reading GPDAT register, so the code use shadow data register instead. But the code may give the wrong status of GPIOs defined as input under some scenarios: 1. If some pins were configured as inputs and were asserted high before booting the kernel, the shadow data has been initialized with those pin values. 2. Some pins have been configured as output first and have been set to the high value, then reconfigured as input. The above cases will make the shadow data for those input pins to be set to high. Then reading the pin status will always return high even if the actual pin status is low. The code should eliminate the effects of the shadow data to the input pins, and the status of those pins should be read directly from GPDAT. Cc: stable@vger.kernel.org Acked-by: Scott Wood <scottwood@freescale.com> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpiolib: use platform GPIO mappings as fallbackAlexandre Courbot
For platforms that use device tree or ACPI as the standard way to look GPIOs up, allow the platform-defined GPIO mappings to be used as a fallback. This may be useful for platforms that need extra GPIOs mappings not defined by the firmware. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpiolib: fix lookup of platform-mapped GPIOsAlexandre Courbot
A typo resulted in GPIO lookup failing unconditionally. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reported-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpio: Add MOXA ART GPIO driverJonas Jensen
Add GPIO driver for MOXA ART SoCs. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpio: rcar: Support both edge trigger with DTLaurent Pinchart
Some versions of the R-Car GPIO controller support triggering on both edges of the input signal. Whether this capability is supported is currently specified in platform data. R-Car GPIO devices instantiated from the device tree have the capability turned off even when the hardware supports it. To fix this, add DT match data support to the driver, initialize both edge trigger support from match data and enable both edge trigger in r8a7790 and r8a7791 match data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpio-lynxpoint: Allow building as a moduleJean Delvare
Change CONFIG_GPIO_LYNXPOINT from bool to tristate so that the gpio-lynxpoint driver can be built as a module. Add the required glue: an exit function to unregister the driver, and module information. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03ARM: lpc32xx: move custom GPIO headerLinus Walleij
Move <mach/gpio-lpc32xx.h> to <linux/platform_data/gpio-lpc32xx.h>. Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03gpio: drop users of irq_set_chip_and_handler_name()Linus Walleij
Switch all users of irq_set_chip_and_handler_name() to simply use irq_set_chip_and_handler(), all just provide a boilerplate name like "demux" or "mux" - a fact which is anyway obvious from the hwirq number from the irqdomain now present in e.g. /proc/interrupts. Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: David Cohen <david.a.cohen@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-28Merge tag 'gpio-v3.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here us a bunch of patches for the v3.13 series. Most important stuff is related to fixes and documentation for the new GPIO descriptor API. If the diffstat is scary you'll notice most of it is to Documentation/*: - A big slew of documentation for the gpiod transition that happened in the merge window, no semantic effect, but we should provide proper documentation with the new API. - Fix flags related to the new API. - Fix to the find_chip_by_name() lookup function related to the new API. - Fix of_find_gpio() when not using device tree. - Bug fix for the TB10x direction setting. - Error path fixes from Dan Carpenter. - Nasty IRQdomain bug relating to taking an unitialized spinlock. - Minor fixes here and there" * tag 'gpio-v3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: bcm281xx: Fix return value of bcm_kona_gpio_get() gpio: pl061: move irqdomain initialization gpio: ucb1400: Add MODULE_ALIAS gpiolib: fix of_find_gpio() when OF not defined gpio: fix memory leak in error path gpio: rcar: NULL dereference on error in probe() gpio: msm: make msm_gpio.summary_irq signed for error handling gpio: mvebu: make mvchip->irqbase signed for error handling gpiolib: use dedicated flags for GPIO properties gpiolib: fix find_chip_by_name() Documentation: gpiolib: document new interface gpio: tb10x: Set output value before setting direction to output
2013-11-27gpio: bcm281xx: Fix return value of bcm_kona_gpio_get()gpio-v3.13-2Markus Mayer
We need to return the corresponding bit for a particular GPIO. This bit contains shift not mask. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-27gpio: pl061: move irqdomain initializationLinus Walleij
The PL061 driver had the irqdomain initialization in an unfortunate place: when used with device tree (and thus passing the base IRQ 0) the driver would work, as this registers an irqdomain and waits for mappings to be done dynamically as the devices request their IRQs, whereas when booting using platform data the irqdomain core would attempt to allocate IRQ descriptors dynamically (which works fine) but also to associate the irq_domain_associate_many() on all IRQs, which in turn will call the mapping function which at this point will try to set the type of the IRQ and then tries to acquire a non-initialized spinlock yielding a backtrace like this: CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-rc1+ #652 Backtrace: [<c0016f0c>] (dump_backtrace) from [<c00172ac>] (show_stack+0x18/0x1c) r6:c798ace0 r5:00000000 r4:c78257e0 r3:00200140 [<c0017294>] (show_stack) from [<c0329ea0>] (dump_stack+0x20/0x28) [<c0329e80>] (dump_stack) from [<c004fa80>] (__lock_acquire+0x1c0/0x1b80) [<c004f8c0>] (__lock_acquire) from [<c0051970>] (lock_acquire+0x6c/0x80) r10:00000000 r9:c0455234 r8:00000060 r7:c047d798 r6:600000d3 r5:00000000 r4:c782c000 [<c0051904>] (lock_acquire) from [<c032e484>] (_raw_spin_lock_irqsave+0x60/0x74) r6:c01a1100 r5:800000d3 r4:c798acd0 [<c032e424>] (_raw_spin_lock_irqsave) from [<c01a1100>] (pl061_irq_type+0x28/0x) r6:00000000 r5:00000000 r4:c798acd0 [<c01a10d8>] (pl061_irq_type) from [<c0059ef4>] (__irq_set_trigger+0x70/0x104) r6:00000000 r5:c01a10d8 r4:c046da1c r3:c01a10d8 [<c0059e84>] (__irq_set_trigger) from [<c005b348>] (irq_set_irq_type+0x40/0x60) r10:c043240c r8:00000060 r7:00000000 r6:c046da1c r5:00000060 r4:00000000 [<c005b308>] (irq_set_irq_type) from [<c01a1208>] (pl061_irq_map+0x40/0x54) r6:c79693c0 r5:c798acd0 r4:00000060 [<c01a11c8>] (pl061_irq_map) from [<c005d27c>] (irq_domain_associate+0xc0/0x190) r5:00000060 r4:c046da1c [<c005d1bc>] (irq_domain_associate) from [<c005d604>] (irq_domain_associate_man) r8:00000008 r7:00000000 r6:c79693c0 r5:00000060 r4:00000000 [<c005d5d0>] (irq_domain_associate_many) from [<c005d864>] (irq_domain_add_simp) r8:c046578c r7:c035b72c r6:c79693c0 r5:00000060 r4:00000008 r3:00000008 [<c005d814>] (irq_domain_add_simple) from [<c01a1380>] (pl061_probe+0xc4/0x22c) r6:00000060 r5:c0464380 r4:c798acd0 [<c01a12bc>] (pl061_probe) from [<c01c0450>] (amba_probe+0x74/0xe0) r10:c043240c r9:c0455234 r8:00000000 r7:c047d7f8 r6:c047d744 r5:00000000 r4:c0464380 This moves the irqdomain initialization to a point where the spinlock and GPIO chip are both fully propulated, so the callbacks can be used without crashes. I had some problem reproducing the crash, as the devm_kzalloc():ed zeroed memory would seemingly mask the spinlock as something OK, but by poisoning the lock like this: u32 *dum; dum = (u32 *) &chip->lock; *dum = 0xaaaaaaaaU; I could reproduce, fix and test the patch. Reported-by: Russell King <linux@arm.linux.org.uk> Cc: Rob Herring <robherring2@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25Merge tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few more fixes for issues found booting older omaps using device tree. Also few randconfig build fixes and removal of some dead code for omap4 as it no longer has legacy platform data based booting support. * tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init ARM: OMAP2+: Remove legacy mux code for display.c ARM: OMAP2+: Fix undefined reference to set_cntfreq gpio: twl4030: Fix passing of pdata in the device tree case gpio: twl4030: Fix regression for twl gpio output ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain ARM: dts: Fix omap2 specific dtsi files by adding the missing entries ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x i2c: omap: Fix missing device tree flags for omap2
2013-11-25gpio: em: Enable mask on suspendMagnus Damm
Now when lazy interrupt disable has been enabled in the driver then extend the code to set IRQCHIP_MASK_ON_SUSPEND which tells the core that only IRQs marked as wakeups need to stay enabled during Suspend-to-RAM. Tested on the KZM9D board with GPIO-keys. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: em: Use lazy disableMagnus Damm
Set the ->irq_enable() and ->irq_disable() methods to NULL to enable lazy disable of interrupts. This by itself provides some level of optimization, but is mainly enabled as ground work for future Suspend-to-RAM wake up support. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: em: Setup gpiochip->devMagnus Damm
Make sure gpio_chip->dev is setup so of_gpiochip_add() will work as expected. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: rcar: Enable mask on suspendMagnus Damm
Now when lazy interrupt disable has been enabled in the driver then extend the code to set IRQCHIP_MASK_ON_SUSPEND which tells the core that only IRQs marked as wakeups need to stay enabled during Suspend-to-RAM. Tested on the Lager board with GPIO-keys and Suspend-to-RAM. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: rcar: Use lazy disableMagnus Damm
Set the ->irq_enable() and ->irq_disable() methods to NULL to enable lazy disable of interrupts. This by itself provides some level of optimization, but is mainly enabled as ground work for future Suspend-to-RAM wake up support. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio/omap: raw read and write endian fixVictor Kamensky
All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Kevin Hilman <khilman@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio/lynxpoint: add new ACPI IDMika Westerberg
Newer Intel PCHs have the same GPIO controller than Haswell but the ACPI ID is different. Add this ID to the driver supported IDs list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: ucb1400: Add MODULE_ALIASAxel Lin
This driver can be built as a module now. Add MODULE_ALIAS to support module auto-loading. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpiolib: fix of_find_gpio() when OF not definedAlexandre Courbot
The prototype for static GPIO lookup functions has been updated to use an explicit type for GPIO lookup flags. Unfortunately the definition of of_find_gpio() when CONFIG_OF is not defined has been omitted, which triggers a warning. This patch fixes this. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: fix memory leak in error pathMichal Nazarewicz
Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: rcar: NULL dereference on error in probe()Dan Carpenter
It's not obvious from the label name but "err1" tries to release "p->irq_domain" which leads to a NULL dereference. Fixes: 119f5e448d32 ('gpio: Renesas R-Car GPIO driver V3') Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: msm: make msm_gpio.summary_irq signed for error handlingDan Carpenter
There is a bug in msm_gpio_probe() where we do: msm_gpio.summary_irq = platform_get_irq(pdev, 0); if (msm_gpio.summary_irq < 0) { The problem is that "msm_gpio.summary_irq" is unsigned so the error handling doesn't work. I've fixed it by making it signed. Fixes: 43f68444bce7 ('gpio: msm: Add device tree and irqdomain support for gpio-msm-v2') Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25gpio: mvebu: make mvchip->irqbase signed for error handlingDan Carpenter
There is a bug in mvebu_gpio_probe() where we do: mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1); if (mvchip->irqbase < 0) { The problem is that mvchip->irqbase is unsigned so the error handling doesn't work. I have changed it to be a regular int. Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-30 03:23:18 +0000