summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2023-09-06drm/amd/display: prevent potential division by zero errorsHamza Mahfooz
There are two places in apply_below_the_range() where it's possible for a divide by zero error to occur. So, to fix this make sure the divisor is non-zero before attempting the computation in both cases. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2637 Fixes: a463b263032f ("drm/amd/display: Fix frames_to_insert math") Fixes: ded6119e825a ("drm/amd/display: Reinstate LFC optimization") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-06drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gammaMelissa Wen
For DRM legacy gamma, AMD display manager applies implicit sRGB degamma using a pre-defined sRGB transfer function. It works fine for DCN2 family where degamma ROM and custom curves go to the same color block. But, on DCN3+, degamma is split into two blocks: degamma ROM for pre-defined TFs and `gamma correction` for user/custom curves and degamma ROM settings doesn't apply to cursor plane. To get DRM legacy gamma working as expected, enable cursor degamma ROM for implict sRGB degamma on HW with this configuration. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803 Fixes: 96b020e2163f ("drm/amd/display: check attr flag before set cursor degamma on DCN3+") Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-06drm/amd/display: limit the v_startup workaround to ASICs older than DCN3.1Hamza Mahfooz
Since, calling dcn20_adjust_freesync_v_startup() on DCN3.1+ ASICs can cause the display to flicker and underflow to occur, we shouldn't call it for them. So, ensure that the DCN version is less than DCN_VERSION_3_1 before calling dcn20_adjust_freesync_v_startup(). Cc: stable@vger.kernel.org Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-06Revert "drm/amd/display: Remove v_startup workaround for dcn3+"Hamza Mahfooz
This reverts commit 3a31e8b89b7240d9a17ace8a1ed050bdcb560f9e. We still need to call dcn20_adjust_freesync_v_startup() for older DCN3+ ASICs. Otherwise, it can cause DP to HDMI 2.1 PCONs to fail to light up. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2809 Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31Revert "Revert "drm/amd/display: Implement zpos property""Hamza Mahfooz
This reverts commit e2066eb4efe0e7d2d329d6e6765ed637a523ac45. The problematic IGT test case (i.e. kms_atomic@plane-immutable-zpos) has been fixed as of commit cb77add45011 ("tests/kms_atomic: remove zpos < N-planes assert") to the IGT repo. So, reintroduce the reverted code. Link: https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/commit/cb77add45011b129e21f3cb2a4089a73dde56179 Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: always switch off ODM before committing more streamsWenjing Liu
ODM power optimization is only supported with single stream. When ODM power optimization is enabled, we might not have enough free pipes for enabling other stream. So when we are committing more than 1 stream we should first switch off ODM power optimization to make room for new stream and then allocating pipe resource for the new stream. Cc: stable@vger.kernel.org Fixes: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe") Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: Remove wait while lockedGabe Teeger
[Why] We wait for mpc idle while in a locked state, leading to potential deadlock. [What] Move the wait_for_idle call to outside of HW lock. This and a call to wait_drr_doublebuffer_pending_clear are moved added to a new static helper function called wait_for_outstanding_hw_updates, to make the interface clearer. Cc: stable@vger.kernel.org Fixes: 8f0d304d21b3 ("drm/amd/display: Do not commit pipe when updating DRR") Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: update blank state on ODM changesWenjing Liu
When we are dynamically adding new ODM slices, we didn't update blank state, if the pipe used by new ODM slice is previously blanked, we will continue outputting blank pixel data on that slice causing right half of the screen showing blank image. The previous fix was a temporary hack to directly update current state when committing new state. This could potentially cause hw and sw state synchronization issues and it is not permitted by dc commit design. Cc: stable@vger.kernel.org Fixes: 7fbf451e7639 ("drm/amd/display: Reinit DPG when exiting dynamic ODM") Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: Add smu write msg id fail retry processFudong Wang
A benchmark stress test (12-40 machines x 48hours) found that DCN315 has cases where DC writes to an indirect register to set the smu clock msg id, but when we go to read the same indirect register the returned msg id doesn't match with what we just set it to. So, to fix this retry the write until the register's value matches with the requested value. Cc: stable@vger.kernel.org # 6.1+ Fixes: f94903996140 ("drm/amd/display: Add DCN315 CLK_MGR") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Fudong Wang <fudong.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31Partially revert "drm/amd/display: update add plane to context logic with a ↵Wenjing Liu
new algorithm" This partially reverts commit 460ea8980511 ("drm/amd/display: update add plane to context logic with a new algorithm"). The new secondary pipe allocation logic triggers an issue with a specific hardware state transition and causes a frame of corruption when toggling between windowed MPO and ODM desktop only mode. Ideally hwss is supposed to handle this scenario. We are temporarily reverting the logic and investigate the root cause why this transition would cause corruptions. Fixes: 460ea8980511 ("drm/amd/display: update add plane to context logic with a new algorithm") Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: register edp_backlight_control() for DCN301Hamza Mahfooz
As made mention of in commit 099303e9a9bd ("drm/amd/display: eDP intermittent black screen during PnP"), we need to turn off the display's backlight before powering off an eDP display. Not doing so will result in undefined behaviour according to the eDP spec. So, set DCN301's edp_backlight_control() function pointer to dce110_edp_backlight_control(). Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765 Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit") Suggested-by: Swapnil Patel <swapnil.patel@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: fix static screen detection settingSungHuai Wang
[WHY] OTG_STATIC_SCREEN_EVENT_MASK is changed in DCN3, but we still follow DCN2 to apply setting for OTG_STATIC_SCREEN_EVENT_MASK. [How] Add new function to apply correct settings for DCN3 series. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: SungHuai Wang <danny.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: fix mode scaling (RMX_.*)Hamza Mahfooz
As made mention of in commit 4a2df0d1f28e ("drm/amd/display: Fixed non-native modes not lighting up"), we shouldn't call drm_mode_set_crtcinfo() once the crtc timings have been decided. Since, it can cause settings to be unintentionally overwritten. So, since dm_state is never NULL now, we can use old_stream to determine if we should call drm_mode_set_crtcinfo() because we only need to set the crtc timing parameters for entirely new streams. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Fixes: bd49f19039c1 ("drm/amd/display: Always set crtcinfo from create_stream_for_sink") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: set minimum of VBlank_nomChunTao Tso
[Why] If VBlank_nom is too small, it will cause VStartUP_Start smaller than VBackPorch + VSync width which is an invalid case for VStartUP_Start and where to send AS-SDP. [How] Setup a minimum value to VBlank_nom Reviewed-by: Reza Amini <reza.amini@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: Correct unit conversion for vstartupReza Amini
[why] vstartup is calculated to be a large number. it works because it is within vertical blank, but it reduces region of blank that can be used for power gating. [how] Calculation needs to convert micro seconds to number of vertical lines. Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Reza Amini <reza.amini@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: Roll back unit correctionOvidiu Bunea
[why] This Unit correction exposes a Replay corruption. [how] This reverts commit: commit dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup") Roll back unit conversion until Replay can fix their corruption. Fixes: dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup") Reviewed-by: Reza Amini <reza.amini@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-31drm/amd/display: Enable Replay for static screen use casesBhawanpreet Lakha
- Setup replay config on device init. - Enable replay if feature is enabled (prioritize replay over PSR, since it can be enabled in more usecases) - Add debug masks to enable replay on supported ASICs Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-24BackMerge tag 'v6.5-rc7' into drm-nextDave Airlie
Linux 6.5-rc7 This is needed for the CI stuff and the msm pull has fixes in it. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-08-16Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""Alex Deucher
This reverts commit 27dd79c00aeab36cd7542c7a4481a32549038659. It appears MPC_SPLIT_DYNAMIC still causes problems with multiple displays on DCN2.0 hardware. Switch back to MPC_SPLIT_AVOID_MULT_DISP. This increases power usage with multiple displays, but avoids hangs. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2475 Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.4.x
2023-08-16Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""Alex Deucher
This reverts commit 27dd79c00aeab36cd7542c7a4481a32549038659. It appears MPC_SPLIT_DYNAMIC still causes problems with multiple displays on DCN2.0 hardware. Switch back to MPC_SPLIT_AVOID_MULT_DISP. This increases power usage with multiple displays, but avoids hangs. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2475 Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-16drm/amd/display: Handle Replay related hpd irqBhawanpreet Lakha
Handle replay related hpd irqs Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Update adaptive sync infopackets for replayBhawanpreet Lakha
Update infopackets for replay Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Promote DAL to 3.2.247Aric Cyr
This version brings along following fixes: - Improve power saving feature - Clean up for code clarity - Fix crashing bug - Fix pipe allocation for older ASIC - Fix for gamut remap - Fix 8K 60Hz display in test cases - Fix bug in clock gating - Improve DP2 compliance Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: [FW Promotion] Release 0.0.179.0Anthony Koo
- Add defines to specify new PHY power states Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Replace ternary operator with min() in ↵Srinivasan Shanmugam
'dm_helpers_parse_edid_caps' Fixes the following coccicheck: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c:120:41-42: WARNING opportunity for min() Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: enable low power mode for VGA memoryAurabindo Pillai
[Why] When unused, all memory blocks should be put in a low power state [How] Check the value of enable_mem_low_power.bits.vga and set corresponding bit in the hardware register Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Add some missing register definitionsAurabindo Pillai
[Why&How] Add some missing register definitions and rearrange some others to maintain consistency with related definitions. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: avoid crash and add z8_marks related in dmlCharlene Liu
[why] add dml1 used calculate_wm_and_dlg function pointer check to prevent crash. add z8 watermarks to struct for later asic use Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: implement pipe type definition and adding accessorsWenjing Liu
[why] There is a lack of encapsulation of pipe connection representation in pipe context. This has caused many challenging bugs and coding errors with repeated logic to identify the same pipe type. [how] Formally define pipe types and provide getters to identify a pipe type and find a pipe based on specific requirements. Update existing logic in non dcn specific files and dcn32 and future versions to use the new accessors. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Enable 8k60hz mode on single displayNicholas Susanto
[Why] 8k60hz compliace test failing because we restrict it single memory channels. Workaround by not restricting it on single displays. [How] Adding an additional check to DCN314 to restrict 8k60hz mode if it has more than 1 display connected. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: fix incorrect stream_res allocation for older ASICWenjing Liu
[why] There is a recent work for developing a new pipe resource allocation policy used for new ASIC. The new code change needs to modify asic independent pipe resource allocation flow and hook up the new allocation policy in asic dependent layer. Unfortunately this change revealed a hidden bug in the old pipe resource allocation sequence used for older asics. In the older version of acquiring pipe for layer, we are always assigning otg master's opp and tg to the newly allocated secondary dpp pipe. This logic is incorrect when the secodnary dpp pipe is connected to a secondary opp head pipe in ODM combine configuration. Before the recent change, we will overwrite this wrong assignement in asic independent layer again. This covers up the issue. With the recent change, we will no longer cover up this in upper layer and therefore causes wrong tg and opp assignement to the secondary dpp pipe connected to a secondary opp head. [how] Always assign tg and opp from its own opp head instead of otg master. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Gamut remap only changes missedKrunoslav Kovac
[WHY&HOW] If surface format is dynamically changed within app without changing timing / whole plane, we don't reprogram gamut remap matrix. Issue example: Linear FP16 scRGB going to PQ+BT.2020 monitor. Remap = scRGB->BT.2020 App switches swapchain format to 10-bit PQ+BT.2020. SW calculates correctly that new Remap = bypass (in=-out=BT.2020). But update not applied in HW. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: PMFW to wait for DMCUB ack for FPO casesAlvin Lee
[Description] We want PMFW to wait for DMCUB to ACK the MCLK end message for FPO cases as well. Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Enable subvp high refresh up to 175hzAlvin Lee
[Description] Expand the SubVP policy to include up to 175hz displays for better power saving on more display configs. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: disable clock gating logic reversed bug fixMuhammad Ahmed
[Why] disable clock gating logic reversed bug fix Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Support Compliance Test Pattern Generation with DP2 RetimerMichael Strauss
[WHY] Certain retimer requires workarounds in order to correctly output test patterns. [HOW] Add vendor-specific aux sequences to program retimer's TX and pattern generator when specific compliance test patterns are requested by sink. Note: SQ128 w/a in DPMF mode only works in one flip orientation currently Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Remove unnecessary NULL valuesRuan Jinjie
The NULL initialization of the pointers assigned by kzalloc() first is not necessary, because if the kzalloc() failed, the pointers will be assigned NULL, otherwise it works as usual. so remove it. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: dmub_replay: don't use kernel-doc markersRandy Dunlap
These functions don't use kernel-doc notation for comments so don't begin each comment block with the "/**" kernel-doc marker. This prevents a bunch of kernel-doc warnings: dmub_replay.c:37: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst dmub_replay.c:37: warning: missing initial short description on line: * Get Replay state from firmware. dmub_replay.c:66: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst dmub_replay.c:66: warning: missing initial short description on line: * Enable/Disable Replay. dmub_replay.c:116: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst dmub_replay.c:116: warning: missing initial short description on line: * Set REPLAY power optimization flags. dmub_replay.c:134: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst dmub_replay.c:134: warning: missing initial short description on line: * Setup Replay by programming phy registers and sending replay hw context values to firmware. and 10 more similar warnings. Fixes: c7ddc0a800bc ("drm/amd/display: Add Functions to enable Freesync Panel Replay") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: lore.kernel.org/r/202308081459.US5rLYAY-lkp@intel.com Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Update replay for clk_mgr optimizationsBhawanpreet Lakha
Add Replay calls to clk_mgr updates (just like PSR) Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Add Replay supported/enabled checksBhawanpreet Lakha
- Add checks for Cursor update and dirty rects (sending updates to dmub) - Add checks for dc_notify_vsync, and fbc and subvp Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Fix a regression on Polaris cardsMario Limonciello
DCE products don't define a `remove_stream_from_ctx` like DCN ones do. This means that when compute_mst_dsc_configs_for_state() is called it always returns -EINVAL which causes MST to fail to setup. Cc: stable@vger.kernel.org # 6.4.y Cc: Harry Wentland <Harry.Wentland@amd.com> Reported-by: Klaus.Kusche@computerix.info Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2671 Fixes: efa4c4df864e ("drm/amd/display: call remove_stream_from_ctx from res_pool funcs") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: check attr flag before set cursor degamma on DCN3+Melissa Wen
Don't set predefined degamma curve to cursor plane if the cursor attribute flag is not set. Applying a degamma curve to the cursor by default breaks userspace expectation. Checking the flag before performing any color transformation prevents too dark cursor gamma in DCN3+ on many Linux desktop environment (KDE Plasma, GNOME, wlroots-based, etc.) as reported at: - https://gitlab.freedesktop.org/drm/amd/-/issues/1513 This is the same approach followed by DCN2 drivers where the issue is not present. Fixes: 03f54d7d3448 ("drm/amd/display: Add DCN3 DPP") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-08-09drm/amd/display: Don't show stack trace for missing eDPMario Limonciello
Some systems are only connected by HDMI or DP, so warning related to missing eDP is unnecessary. Downgrade to debug instead. Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Fixes: 6d9b6dceaa51 ("drm/amd/display: only warn once in dce110_edp_wait_for_hpd_ready()") Reported-by: Mastan.Katragadda@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd: Disable S/G for APUs when 64GB or more host memoryMario Limonciello
Users report a white flickering screen on multiple systems that is tied to having 64GB or more memory. When S/G is enabled pages will get pinned to both VRAM carve out and system RAM leading to this. Until it can be fixed properly, disable S/G when 64GB of memory or more is detected. This will force pages to be pinned into VRAM. This should fix white screen flickers but if VRAM pressure is encountered may lead to black screens. It's a trade-off for now. Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: <stable@vger.kernel.org> # 6.1.y: bf0207e172703 ("drm/amdgpu: add S/G display parameter") Cc: <stable@vger.kernel.org> # 6.4.y Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Get replay info from VSDBBhawanpreet Lakha
We need to make sure that the panel supports replay. This info is inside the amd vsdb (vendor specific data block). Create a function to parse the block and read the replay_mode bit. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Clean up errors in dce_clk_mgr.cRan Sun
Fix the following errors reported by checkpatch: ERROR: spaces required around that '?' (ctx:VxE) Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Clean up errors in display_mode_vba_30.cRan Sun
Fix the following errors reported by checkpatch: ERROR: else should follow close brace '}' Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Clean up errors in dcn10_dpp_dscl.cRan Sun
Fix the following errors reported by checkpatch: ERROR: else should follow close brace '}' Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Clean up errors in dc_stream.cRan Sun
Fix the following errors reported by checkpatch: ERROR: that open brace { should be on the previous line Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Clean up errors in bios_parser2.cRan Sun
Fix the following errors reported by checkpatch: ERROR: switch and case should be at the same indent ERROR: code indent should use tabs where possible Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.0.4) at 2026-04-25 09:41:26 +0000