summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2025-09-15drm/amd/display: Set up pixel encoding for YCBCR422Mario Limonciello
[Why] fill_stream_properties_from_drm_display_mode() will not configure pixel encoding to YCBCR422 when the DRM color format supports YCBCR422 but not YCBCR420 or YCBCR4444. Instead it will fallback to RGB. [How] Add support for YCBCR422 in pixel encoding mapping. Suggested-by: Mauri Carvalho <mcarvalho3@lenovo.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Mario Limonciello <Mario.Limonciello@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: fix dml ms order of operationsAusef Yousof
[why&how] small error in order of operations in immediateflipbytes calculation on dml ms side that can result in dml ms and mp mismatch immediateflip support for a given pipe and thus an invalid hw state, correct the order to align with mp. Reviewed-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: limit one non-related log to dGPUCharlene Liu
[Why&How] some log are for dGPU only. Added check to limit log. Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Allow RX6xxx & RX7700 to invoke amdgpu_irq_get/putIvan Lipski
[Why&How] As reported on https://gitlab.freedesktop.org/drm/amd/-/issues/3936, SMU hang can occur if the interrupts are not enabled appropriately, causing a vblank timeout. This patch reverts commit 5009628d8509 ("drm/amd/display: Remove unnecessary amdgpu_irq_get/put"), but only for RX6xxx & RX7700 GPUs, on which the issue was observed. This will re-enable interrupts regardless of whether the user space needed it or not. Fixes: 5009628d8509 ("drm/amd/display: Remove unnecessary amdgpu_irq_get/put") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3936 Suggested-by: Sun peng Li <sunpeng.li@amd.com> Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Rename header file link.h to link_service.hWesley Chalmers
[WHY] Header file name "link.h" collides with system header when dc is compiled as a user-mode library [WHAT] Rename link.h to link_service.h to avoid name collision Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Fix DMCUB loading sequence for DCN3.2Nicholas Kazlauskas
[Why] New sequence from HW for reset and firmware reloading has been provided that aims to stabilize the reload sequence in the case the firmware is hung or has outstanding requests. [How] Update the sequence to remove the DMUIF reset and the redundant writes in the release. Reviewed-by: Sreeja Golui <sreeja.golui@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: prepare dml 2.1 for new asicDmytro Laktyushkin
[Why&How] prepare dml 2.1 for new asic Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Modify the link training policyZhikai Zhai
[Why&How] Currently fallback to low link rate if the link training fails once on USB4. It may cause the bandwidth couldn't satisfy the requirement of streams. Modify the policy to do training retry in the previous few times, only do fallback at the last time. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Add pixel_clock to amd_pp_display_configurationTimur Kristóf
This commit adds the pixel_clock field to the display config struct so that power management (DPM) can use it. We currently don't have a proper bandwidth calculation on old GPUs with DCE 6-10 because dce_calcs only supports DCE 11+. So the power management (DPM) on these GPUs may need to make ad-hoc decisions for display based on the pixel clock. Also rename sym_clock to pixel_clock in dm_pp_single_disp_config to avoid confusion with other code where the sym_clock refers to the DisplayPort symbol clock. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15Merge tag 'v6.17-rc6' into drm-nextDave Airlie
This is a backmerge of Linux 6.17-rc6, needed for msm, also requested by misc. Signed-off-by: Dave Airlie <airlied@redhat.com>
2025-09-12Merge tag 'amd-drm-next-6.18-2025-09-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.18-2025-09-09: amdgpu: - Add CRIU support for gem objects - SI UVD fix - SI DPM fixes - Misc code cleanups - RAS updates - GPUVM debugfs fixes - Cyan Skillfish updates - UserQ updates - OEM i2c fix - SMU 13.0.x updates - DPCD probe quirk fix - Make vbios build number available in sysfs - HDCP updates - Brightness curve fixes - eDP updates - Vblank fixes - DCN 3.5 PG fix - PBN calcution fix amdkfd: - Add CRIU support for gem objects - Flexible array fix - P2P topology fix - APU memlimit fixes - Misc code cleanups UAPI: - Add CRIU support for gem objects Proposed userspace: https://github.com/checkpoint-restore/criu/pull/2613 radeon: - Use dev_warn_once() in CS parsers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250909161928.942785-1-alexander.deucher@amd.com
2025-09-09drm/amd/display: use udelay rather than fsleepAlex Deucher
This function can be called from an atomic context so we can't use fsleep(). Fixes: 01f60348d8fb ("drm/amd/display: Fix 'failed to blank crtc!'") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4549 Cc: Wen Chen <Wen.Chen3@amd.com> Cc: Fangzhi Zuo <jerry.zuo@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 27e4dc2c0543fd1808cc52bd888ee1e0533c4a2e)
2025-09-09drm/amd/display: Remove duplicated codeRay Wu
[Why&How] Remove duplicated code Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-09drm/amd/display: use udelay rather than fsleepAlex Deucher
This function can be called from an atomic context so we can't use fsleep(). Fixes: 01f60348d8fb ("drm/amd/display: Fix 'failed to blank crtc!'") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4549 Cc: Wen Chen <Wen.Chen3@amd.com> Cc: Fangzhi Zuo <jerry.zuo@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-09drm/amd/display: remove oem i2c adapter on finishGeoffrey McRae
Fixes a bug where unbinding of the GPU would leave the oem i2c adapter registered resulting in a null pointer dereference when applications try to access the invalid device. Fixes: 3d5470c97314 ("drm/amd/display/dm: add support for OEM i2c bus") Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 89923fb7ead4fdd37b78dd49962d9bb5892403e6) Cc: stable@vger.kernel.org
2025-09-09drm/amd/display: Drop dm_prepare_suspend() and dm_complete()Mario Limonciello (AMD)
[Why] dm_prepare_suspend() was added in commit 50e0bae34fa6b ("drm/amd/display: Add and use new dm_prepare_suspend() callback") to allow display to turn off earlier in the suspend sequence. This caused a regression that HDMI audio sometimes didn't work properly after resume unless audio was playing during suspend. [How] Drop dm_prepare_suspend() callback. All code in it will still run during dm_suspend(). Also drop unnecessary dm_complete() callback. dm_complete() was used for failed prepare and also for any case of successful resume. The code in it already runs in dm_resume(). This change will introduce more time that the display is turned on during suspend sequence. The compositor can turn it off sooner if desired. Cc: Harry Wentland <harry.wentland@amd.com> Reported-by: Przemysław Kopa <prz.kopa@gmail.com> Closes: https://lore.kernel.org/amd-gfx/1cea0d56-7739-4ad9-bf8e-c9330faea2bb@kernel.org/T/#m383d9c08397043a271b36c32b64bb80e524e4b0f Reported-by: Kalvin <hikaph+oss@gmail.com> Closes: https://github.com/alsa-project/alsa-lib/issues/465 Closes: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4809 Fixes: 50e0bae34fa6b ("drm/amd/display: Add and use new dm_prepare_suspend() callback") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 2fd653b9bb5aacec5d4c421ab290905898fe85a2) Cc: stable@vger.kernel.org
2025-09-09drm/amd/display: Correct sequences and delays for DCN35 PG & RCGOvidiu Bunea
[why] The current PG & RCG programming in driver has some gaps and incorrect sequences. [how] Added delays after ungating clocks to allow ramp up, increased polling to allow more time for power up, and removed the incorrect sequences. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1bde5584e297921f45911ae874b0175dce5ed4b5) Cc: stable@vger.kernel.org
2025-09-09drm/amd/display: Disable DPCD Probe QuirkFangzhi Zuo
Disable dpcd probe quirk to native aux. Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4500 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250904191351.746707-1-Jerry.Zuo@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c5f4fb40584ee591da9fa090c6f265d11cbb1acf) Cc: stable@vger.kernel.org # 6.16.y: 5281cbe0b55a Cc: stable@vger.kernel.org # 6.16.y: 0b4aa85e8981 Cc: stable@vger.kernel.org # 6.16.y: b87ed522b364 Cc: stable@vger.kernel.org # 6.16.y
2025-09-05drm/amd/display: Drop dm_prepare_suspend() and dm_complete()Mario Limonciello (AMD)
[Why] dm_prepare_suspend() was added in commit 50e0bae34fa6b ("drm/amd/display: Add and use new dm_prepare_suspend() callback") to allow display to turn off earlier in the suspend sequence. This caused a regression that HDMI audio sometimes didn't work properly after resume unless audio was playing during suspend. [How] Drop dm_prepare_suspend() callback. All code in it will still run during dm_suspend(). Also drop unnecessary dm_complete() callback. dm_complete() was used for failed prepare and also for any case of successful resume. The code in it already runs in dm_resume(). This change will introduce more time that the display is turned on during suspend sequence. The compositor can turn it off sooner if desired. Cc: Harry Wentland <harry.wentland@amd.com> Reported-by: Przemysław Kopa <prz.kopa@gmail.com> Closes: https://lore.kernel.org/amd-gfx/1cea0d56-7739-4ad9-bf8e-c9330faea2bb@kernel.org/T/#m383d9c08397043a271b36c32b64bb80e524e4b0f Reported-by: Kalvin <hikaph+oss@gmail.com> Closes: https://github.com/alsa-project/alsa-lib/issues/465 Closes: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4809 Fixes: 50e0bae34fa6b ("drm/amd/display: Add and use new dm_prepare_suspend() callback") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: Promote DC to 3.2.349Taimur Hassan
This version brings along following updates: - Disable stutter when programming watermarks on dcn32 - Fix pbn_div Calculation Error - Correct sequences and delays for DCN35 PG & RCG - Define interfaces for hubbub perfmance monitoring support - Extend to read eDP general capability 2 - Indicate when custom brightness curves are in use - Dont wait for pipe update during medupdate/highirq - Add HDCP retry_limit control parameter Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: Fix pbn_div Calculation ErrorFangzhi Zuo
[Why] dm_mst_get_pbn_divider() returns value integer coming from the cast from fixed point, but the casted integer will then be used in dfixed_const to be multiplied by 4096. The cast from fixed point to integer causes the calculation error becomes bigger when multiplied by 4096. That makes the calculated pbn_div value becomes smaller than it should be, which leads to the req_slot number becomes bigger. Such error is getting reflected in 8k30 timing, where the correct and incorrect calculated req_slot 62.9 Vs 63.1. That makes the wrong calculation failed to light up 8k30 after a dock under HBR3 x 4. [How] Restore the accuracy by keeping the fraction part calculated for the left shift operation. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: Correct sequences and delays for DCN35 PG & RCGOvidiu Bunea
[why] The current PG & RCG programming in driver has some gaps and incorrect sequences. [how] Added delays after ungating clocks to allow ramp up, increased polling to allow more time for power up, and removed the incorrect sequences. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: Refine error message for vblank init failureRoman Li
[Why] The error message "failed to initialize sw for display support" is used for both DRM device and vblank initialization failures, making it difficult to identify the specific failure during troubleshooting. [How] Update the vblank initialization error message to "failed to initialize vblank for display support" to distinguish it from the DRM device init failure. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: Update dchubbub.h for hubbub perfmon supportWenjing Liu
[why] dchubbub supports performance monitoring for hubbub. The interfaces define the performance monitoring events and their attributes. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: Read DPCD to obtain eDP capability information.Allen Li
[Why & How] Extend to read eDP general capability 2 in detect_edp_sink_caps(). Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Allen Li <wei-guang.li@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: Indicate when custom brightness curves are in useMario Limonciello
[Why] There is a `scale` sysfs attribute that can be used to indicate when non-linear brightness scaling is in use. As Custom brightness curves work by linear interpolation of points the scale is no longer linear. [How] Indicate non-linear scaling when custom brightness curves in use and linear scaling otherwise. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <superm1@kernel.org> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: dont wait for pipe update during medupdate/highirqAusef Yousof
[why&how] control flag for the wait during pipe update wait for vupdate should be set if update type is not fast or med to prevent an invalid sleep operation Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: Add link index in AUX and dpmsCruise Hung
[Why & How] Add the link index in DP AUX transfer and DPMS functions. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: Add HDCP policy controlOleh Kuzhylnyi
[Why] DM should be able to control HDCP retry limit via configurable parameter. [How] Expose a retry_limit parameter for controlling the maximum number of retries and lift the hardcode out to DM. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: Disable DPCD Probe QuirkFangzhi Zuo
Disable dpcd probe quirk to native aux. Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4500 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250904191351.746707-1-Jerry.Zuo@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: Remove redundant ternary operatorsLiao Yuanhong
For ternary operators in the form of "a ? true : false" or "a ? false : true", if 'a' itself returns a boolean result, the ternary operator can be omitted. Remove redundant ternary operators to clean up the code. Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05drm/amd/display: remove oem i2c adapter on finishGeoffrey McRae
Fixes a bug where unbinding of the GPU would leave the oem i2c adapter registered resulting in a null pointer dereference when applications try to access the invalid device. Fixes: 3d5470c97314 ("drm/amd/display/dm: add support for OEM i2c bus") Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-05Merge tag 'drm-misc-next-2025-09-04' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.18: Cross-subsystem Changes: - Update a number of DT bindings for STM32MP25 Arm SoC Core Changes: gem: - Simplify locking for GPUVM panel-backlight-quirks: - Add additional quirks for EDID, DMI, brightness sched: - Fix race condition in trace code - Clean up sysfb: - Clean up Driver Changes: amdgpu: - Give kernel jobs a unique id for better tracing amdxdna: - Improve error reporting bridge: - Improve ref counting on bridge management - adv7511: Provide SPD and HDMI infoframes - it6505: Replace crypto_shash with sha() - synopsys: Add support for DW DPTX Controller plus DT bindings gud: - Replace simple-KMS pipe with regular atomic helpers imagination: - Improve power management - Add support for TH1520 GPU - Support Risc-V architectures ivpu: - Clean up nouveau: - Improve error reporting panthor: - Fail VM bind if BO has offset - Clean up rcar-du: - Make number of lanes configurable rockchip: - Add support for RK3588 DPTX output rocket: - Use kfree() and sizeof() correctly - Test DMA status - Clean up sitronix: - st7571-i2c: Add support for inverted displays and 2-bit grayscale - Clean up stm: - ltdc: Add support support for STM32MP257F-EV1 plus DT bindings tidss: - Convert to kernel's FIELD_ macros v3d: - Improve job management and locking Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250904090932.GA193997@linux.fritz.box
2025-09-03drm: panel-backlight-quirks: Log applied panel brightness quirksAntheas Kapenekakis
Currently, when a panel brightness quirk is applied, there is no log indicating that a quirk was applied. Unwrap the drm device on its own and use drm_info() to log when a quirk is applied. Suggested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://lore.kernel.org/r/20250829145541.512671-7-lkml@antheas.dev Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> (Correct a missing -1 in the message math) Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
2025-09-03drm: panel-backlight-quirks: Add brightness mask quirkAntheas Kapenekakis
Certain OLED devices malfunction on specific brightness levels. Specifically, when DP_SOURCE_BACKLIGHT_LEVEL is written to with the first byte being 0x00 and sometimes 0x01, the panel forcibly turns off until the device sleeps again. Below are some examples. This was found by iterating over brighness ranges while printing DP_SOURCE_BACKLIGHT_LEVEL. It was found that the screen would malfunction on specific values, and some of them were collected. Therefore, introduce a quirk where the minor byte of brightness is OR'd with 0x03 to avoid the range of invalid values. This quirk was tested by removing the workarounds and iterating from 0 to 50_000 value ranges with a cadence of 0.2s/it. The range of the panel is 1000...400_000, so the values were slightly interpolated during testing. The custom brightness curve added on 6.15 was disabled. 86016: 10101000000000000 86272: 10101000100000000 87808: 10101011100000000 251648: 111101011100000000 251649: 111101011100000001 86144: 10101000010000000 87809: 10101011100000001 251650: 111101011100000010 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3803 Tested-by: Philip Müller <philm@manjaro.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://lore.kernel.org/r/20250829145541.512671-5-lkml@antheas.dev Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
2025-09-03drm: panel-backlight-quirks: Convert brightness quirk to generic structureAntheas Kapenekakis
Currently, the brightness quirk is limited to minimum brightness only. Refactor it to a structure, so that more quirks can be added in the future. Reserve 0 value for "no quirk", and use u16 to allow minimum brightness up to 255. Tested-by: Philip Müller <philm@manjaro.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://lore.kernel.org/r/20250829145541.512671-3-lkml@antheas.dev Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
2025-09-02Merge tag 'amd-drm-next-6.18-2025-08-29' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.18-2025-08-29: amdgpu: - Replay fixes - RAS updates - VCN SRAM load fixes - EDID read fixes - eDP ALPM support - AUX fixes - Documenation updates - Rework how PTE flags are generated - DCE6 fixes - VCN devcoredump cleanup - MMHUB client id fixes - SR-IOV fixes - VRR fixes - VCN 5.0.1 RAS support - Backlight fixes - UserQ fixes - Misc code cleanups - SMU 13.0.12 updates - Expanded PCIe DPC support - Expanded VCN reset support - SMU 13.0.x Updates - VPE per queue reset support - Cusor rotation fix - DSC fixes - GC 12 MES TLB invalidation update - Cursor fixes - Non-DC TMDS clock validation fix amdkfd: - debugfs fixes - Misc code cleanups - Page migration fixes - Partition fixes - SVM fixes radeon: - Misc code cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250829190848.1921648-1-alexander.deucher@amd.com
2025-08-29drm/amd/display: Clear the CUR_ENABLE register on DCN314 w/out DPP PGIvan Lipski
[Why&How] ON DCN314, clearing DPP SW structure without power gating it can cause a double cursor in full screen with non-native scaling. A W/A that clears CURSOR0_CONTROL cursor_enable flag if dcn10_plane_atomic_power_down is called and DPP power gating is disabled. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4168 Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 645f74f1dc119dad5a2c7bbc05cc315e76883011) Cc: stable@vger.kernel.org
2025-08-29drm/amd: Re-enable common modes for eDP and LVDSMario Limonciello
[Why] Although compositors will add their own modes, Xorg won't use it's own modes and will only stick to modes advertised by the driver. This mean a user that used to pick 1024x768 could no longer access it unless the panel's native resolution was 1024x768. [How] Revert commit 6d396e7ac1ce3 ("drm/amd/display: Disable common modes for LVDS") and commit 7948afb46af92 ("drm/amd/display: Disable common modes for eDP"). The panel will still use scaling for any non-native modes due to commit 978fa2f6d0b12 ("drm/amd/display: Use scaling for non-native resolutions on eDP") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4538 Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250828140856.2887993-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c2fbf72fe3c2d08856e834ca43328a8829a261d8)
2025-08-29drm/amd/display: Promote DC to 3.2.348Taimur Hassan
Summary: * Refactor bounding box values handling * Fix incorrect condition to fail dto clk calculation * Skip check downlink setting for a certain MST branch device * Fix double cursor issue on dcn314 Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: [FW Promotion] Release 0.1.25.0Taimur Hassan
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: Skip Check Runtime Link Setting for Specific Branch DeviceFangzhi Zuo
[why] Read link setting inside mode validation is not always the final downlink setting. It is found true in Synaptics branch device. At bootup, the preferred mode being set right after 1080p is set. It occurred before graphic load. That modeset switch in a short period of time makes the branch device switch back and forth from lower and higher link rate, observed at Synaptics branch device. DP2 RTK hub on the other hand, sticks to highest available downlink rate after bootup. Existing check of runtime downlink setting in mode validation shows asynchronous at branch device link switch, i.e., downlink switch to higher link rate not yet complete when the mode validation tries to probe the downlink setting. That makes mode validation checking downlink setting making wrong decision by pruning modes that should pass the validation after the downlink setting switch is complete. [how] If Synaptics is found at the last branch, skip checking downlink setting at mode validation. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: Clear the CUR_ENABLE register on DCN314 w/out DPP PGIvan Lipski
[Why&How] ON DCN314, clearing DPP SW structure without power gating it can cause a double cursor in full screen with non-native scaling. A W/A that clears CURSOR0_CONTROL cursor_enable flag if dcn10_plane_atomic_power_down is called and DPP power gating is disabled. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4168 Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: incorrect conditions for failing dto calculationsClay King
[Why & How] Previously, when calculating dto phase, we would incorrectly fail when phase <=0 without additionally checking for the integer value. This meant that calculations would incorrectly fail when the desired pixel clock was an exact multiple of the reference clock. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: Add Component To Handle Bounding Box Values and IP CapsAustin Zheng
[Why] Bounding box values can be stored in multiple locations. (e.g. PMFW, VBIOS, DMUB). The source and interpretation of these values can vary with DCN revision so there should be a component that can gather these values and translate them accordingly [How] Have component start with the statically defined values as a base. Then update them as needed with DCN-specific logic Guard this component with FPU flags since values need to be in float point. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: Optimize custom brightness curve interpolationMario Limonciello
[Why] Custom brightness curve works by walking through all data points one by one. When the brightness value is at either extreme this is a lot of data points to walk. This is especially noticeable when moving a brightness slider around how it can lag. [How] Bisect the data points to find the closest for interpolation. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: Increase minimum clock for TMDS 420 with pipe splittingRelja Vojvodic
[Why] -Pipe splitting allows for clocks to be reduced, but when using TMDS 420, reduced clocks lead to missed clocks cycles on clock resyncing [How] -Impose a minimum clock when using TMDS 420 Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Relja Vojvodic <rvojvodi@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd: Re-enable common modes for eDP and LVDSMario Limonciello
[Why] Although compositors will add their own modes, Xorg won't use it's own modes and will only stick to modes advertised by the driver. This mean a user that used to pick 1024x768 could no longer access it unless the panel's native resolution was 1024x768. [How] Revert commit 6d396e7ac1ce3 ("drm/amd/display: Disable common modes for LVDS") and commit 7948afb46af92 ("drm/amd/display: Disable common modes for eDP"). The panel will still use scaling for any non-native modes due to commit 978fa2f6d0b12 ("drm/amd/display: Use scaling for non-native resolutions on eDP") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4538 Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250828140856.2887993-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: use max() to improve codeQianfeng Rong
Use max() to reduce the code and improve readability. No functional changes. Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-29drm/amd/display: Document num_rmcm_3dluts in mpc_color_capsKavithesh A.S
Fix a kernel-doc warning by documenting the num_rmcm_3dluts member of struct mpc_color_caps. v2: improve comment (Melissa) Signed-off-by: Kavithesh A.S <kavitheshnitt@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-12-15 02:36:37 +0000