summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/radeon_encoders.c
AgeCommit message (Collapse)Author
2011-10-16drm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1Alex Deucher
commit cb7cf41961fe10773c491c75ae73539ad4bbed66 upstream. The encoders are supposedly fully routeable, but changing the mapping doesn't always seem to take. Using a hardcoded mapping is much more reliable. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41366 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03drm/radeon/kms: fix DDIA enable on some rs690 systemsAlex Deucher
commit fdfc61594e6de21c23f955818ef78bcab9bafe40 upstream. DVOOutputControl checks the value of of bios scratch reg 3 on some tables and assumes the encoder is already enabled if the DFP2_ACTIVE bit is set. Clear that bit so the table sets the DDIA enable bit properly. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-17drm/radeon/kms: fix regression is handling >2 heads on cedar/caicosAlex Deucher
commit 33ae1827d6c3c79c5957536ec29d5a8780623147 upstream. Need to add support for 4 crtcs when setting the possible crtcs for the encoders. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-20drm/radeon/kms: add missing param for dce3.2 DP transmitter setupAlex Deucher
This is used during phy init to set up the phy for DP. This may fix DP problems on DCE3.2 cards. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-20drm/radeon/kms/atom: fix duallink on some early DCE3.2 cardsAlex Deucher
Certain revisions of the vbios on DCE3.2 cards have a bug in the transmitter control table which prevents duallink from being enabled properly on some cards. The action switch statement jumps to the wrong offset for the OUTPUT_ENABLE action. The fix is to use the ENABLE action rather than the OUTPUT_ENABLE action on the affected cards. In fixed version of the vbios, both actions jump to the same offset, so the change should be safe. Reported-and-tested-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17drm/radeon/kms: set DP link config properly for DP bridgesAlex Deucher
DP clock and lanes were not set properly for DP bridges. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17drm/radeon/kms: issue blank/unblank commands for ext encodersAlex Deucher
Required for DPMS on some systems. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17drm/radeon/kms: fix support for DDC on dp bridgesAlex Deucher
Need to set up the bridge for DDC prior to the i2c over aux transaction. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17drm/radeon/kms: add support for load detection on dp bridgesAlex Deucher
dp to vga bridges for example. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-17drm/radeon/kms: rework atombios_get_encoder_mode()Alex Deucher
This should give us more reliable results if the table is called before an active device is set. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-05drm/radeon/kms/atom: fix PHY initAlex Deucher
The PHY was not initialized correctly after ac89af1e1010640db072416c786f97391b85790f since the function bailed early as an encoder was not assigned. The encoder isn't necessary for PHY init so just assign to 0 for init so that the table is executed. Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com> Tested-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-24drm/radeon/kms/atom: move dig phy init out of modesettingAlex Deucher
It only needs to be called once at startup, not for every modeset. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-20drm/radeon/kms: rewrite DP handlingAlex Deucher
- reorganize the functions based on use - clean up function naming - rework link training to better match what we use internally - add initial support for DP 1.2 (no MST yet) Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-20drm/radeon/kms/atom: add support for setting DP panel modeAlex Deucher
Required for proper operation with DP bridges. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-20drm/radeon/kms: handle DP bridgesAlex Deucher
Fusion hardware often has DP to VGA/LVDS/TMDS bridges to handle non-DP encoders. Internally we treat them mostly like DP. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-20drm/radeon/kms: add some dp encoder/connector helper funcsAlex Deucher
Used for dp1.2 support and for dp bridges. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-20drm/radeon/kms: make sure eDP panel is on for modesettingAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-20drm/radeon/kms: fix eDP panel power functionAlex Deucher
need to wait for the panel to power up. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-20drm/radeon/kms: adjust eDP handling (v2)Alex Deucher
eDP is usually used as an LVDS replacement, so treat it more like LVDS from the user perspective. v2: encoder mode is always DP for eDP. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-20drm/radeon/kms: fix up DP clock programming on DCE4/5Alex Deucher
In DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock, depending on the asic. The crtc virtual pixel clock is derived from the DP ref clock. - DCE4: PPLL or ext clock - DCE5: DCPLL or ext clock Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip PPLL/DCPLL programming and only program the DP DTO for the crtc virtual pixel clock. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-20drm/radeon/kms: properly handle bpc >8 in atom command tablesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-20drm/radeon/kms: DCE4.1 DIG encoders are fully routeable just like DCE3.2Alex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-28drm/radeon/kms: remove some underscan leftoversAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: atombios big endian fixesCédric Cano
agd5f: additional cleanups/fixes Signed-off-by: Cédric Cano <ccano@interfaceconcept.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: fix interlaced modes on dce4+Alex Deucher
- set scaler table clears the interleave bit, need to reset it in encoder quirks, this was already done for pre-dce4. - remove the interleave settings from set_base() functions this is now handled in the encoder quirks functions, and isn't technically part of the display base setup. - rename evergreen_do_set_base() to dce4_do_set_base() since it's used on both evergreen and NI asics. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=28182 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-31drm/radeon: Fix wrong boolean operatorStefan Weil
This error is reported by cppcheck: drivers/gpu/drm/radeon/radeon_encoders.c:1066: warning: Mutual exclusion over || always evaluates to true. Did you intend to use && instead? It looks like cppcheck is correct, so fix this. No test was run. Cc: David Airlie <airlied@linux.ie> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-27drm/radeon/kms: only enable HDMI mode if radeon audio is enabledAlex Deucher
Force DVI mode if the user specifies radeon.audio=0. The driver doesn't handle HDMI mode properly in some cases. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=27731 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2011-01-10drm/radeon/kms: only enable hdmi features if the monitor supports audioAlex Deucher
This avoids some issues in the current hdmi audio code for monitors without audio. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: parse DCE5 encoder caps when setting up encodersAlex Deucher
Needed to tell which DIG encoders are HBR2 capable for DP 1.2. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: dvo dpms updates for DCE5Alex Deucher
The DVOOutputControl table was removed for DCE5. DVOEncoderControl now handles everything. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: dac dpms updates for DCE5Alex Deucher
The DAC1OutputControl table was removed for DCE5. DAC1EncoderControl now handles everything. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom dig encoder updatesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom transmitter control updatesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: clean up ASIC_IS_DCE41() macroAlex Deucher
only fusion asics are dce4.1 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21drm/radeon/kms: fix DCE4.1 dig routing (v2)Alex Deucher
Works more like DCE4.0 despite what the docs say. This fixes blank screen issues when changing crtc routing due to incorrect crtc to dig mapping. v2: only two DIGx blocks, routing is hardcoded based on link. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-23drm/radeon/kms: Add support for external encoders on fusion APUsAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-23drm/radeon/kms: atom changes for DCE4.1 devicesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms/atom: add proper external encoders supportAlex Deucher
These are external encoder chips connected via DVO or DP. The actual external encoder programming is handled by the kms encoder functions for primary encoder. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms/atom: cleanup and unify DVO handlingAlex Deucher
Handle all the various asic family specific things for DVO. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms: properly power up/down the eDP panel as needed (v4)Alex Deucher
The eDP panel must be powered up for aux transactions, so power it up for detect and mode probe functions, otherwise power it up or down based on dpms. v2: - only mess with eDP panel on DCE4+ - only mess with eDP panel on eDP connectors, not all DP connectors v3: - be extra careful to only mess with eDP panels on eDP connectors v4: - avoid possible null derefernce if a connector has not been assigned to the encoder Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms/atom: set sane defaults in atombios_get_encoder_mode()Alex Deucher
If there was no connector mapped to the encoder, atombios_get_encoder_mode() returned 0 which is the id for DP. Return something sane instead based on the encoder id. This avoids hitting the DP paths on non-DP encoders. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms: turn the backlight off explicitly for dpmsAlex Deucher
Seems some newer systems require this explicitly. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drm/radeon/kms: add support for clock/data path routersAlex Deucher
This is a follow on to: 26b5bc986423cf3887e09188cb662ed651c5374d (drm/radeon/kms: add support for router objects) That patch added support for systems that use a mux to control the ddc line routing between the connectors. This patch adds support for systems that use a mux to control the encoder clock and data path routing to the connectors. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=31339 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drm/radeon/kms: don't disable shared encoders on pre-DCE3 display blocksAlex Deucher
The A/B links aren't independantly useable on these blocks so when we disable the encoders, make sure to only disable the encoder when there is no connector using it. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=18564 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms: rework spread spectrum handlingAlex Deucher
This patch reworks spread spectrum handling to enable it properly on lvds and DP/eDP links. It also fixes several bugs in the old spread spectrum code. - Use the ss recommended reference divider if available when calculating the pll - Use the proper ss command tables on pre-DCE3 asics - Avoid reading past the end of the ss info tables - Enable ss on evergreen asics (lvds, dp, tmds) - Enable ss on DP/eDP links Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-20drm/radeon/kms: set encoder type to DVI for HDMI on evergreenAlex Deucher
Fixes the pink line that shows up with some hdmi monitors. This will need to be revisited when audio support is added. Fixes: http://bugs.freedesktop.org/show_bug.cgi?id=27452 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-20drm/radeon/kms/atom: clean up dig atom handlingAlex Deucher
This allows the tables to be run in some additional cases where the connector info isn't necessary. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-20drm/radeon/kms: DCE3/4 transmitter fixesAlex Deucher
- INIT action takes the actual connector type id, not the enum id - some evergreen cards have the ENABLE_OUTPUT/DISABLE_OUTPUT actions Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-20drm/radeon/kms: rework encoder handlingAlex Deucher
On most newer asics, digital encoders have two links each and they can be used independantly. As such, treat them as separate encoders otherwise the individual links will not get programmed properly at modeset time. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-05drm/radeon/kms: only expose underscan on avivo chipsAlex Deucher
R4xx also uses the atom add connector function, but underscan is only supported on avivo chips. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-05 22:44:30 +0000