summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/radeon_i2c.c
AgeCommit message (Collapse)Author
2016-10-12drm/radeon: fix up dp aux tear down (v2)Alex Deucher
Port the amdgpu fixes from Grazvydas to radeon. v2: drop unrelated whitespace change. bug: https://bugs.freedesktop.org/show_bug.cgi?id=98200 Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-10gpu: drm: radeon: radeon_i2c: don't print error when adding adapter failsWolfram Sang
The core will do this for us now. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-01-22drm/radeon/radeon_i2c: Remove unused functionRickard Strandqvist
Remove the function radeon_best_encoder() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-05drm/dp: add a hw mutex around the transfer functions. (v2)Dave Airlie
This should avoid races between connector probing and HPD irqs in the future, currently mode_config.mutex blocks this possibility. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-02drm/radeon: add a i2c bus mutexAlex Deucher
The i2c and aux buses use the same pads so add a mutex to protect access to the pads. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-04-08drm/radeon/dp: switch to the common i2c over aux codeAlex Deucher
Provides a nice cleanup in radeon. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-01-07drm/radeon: warn users when hw_i2c is enabled (v2)Alex Deucher
The hw i2c engines are disabled by default as the current implementation is still experimental. Print a warning when users enable it so that it's obvious when the option is enabled. v2: check for non-0 rather than 1 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2013-01-03drm/radeon: Properly handle DDC probe for DP bridgesNiels Ole Salscheider
DDC information can be accessed using AUX CH Fixes failure to probe monitors on some systems with DP bridge chips. agd5f: minor fixes Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-10-02UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/David Howells
Convert #include "..." to #include <path/...> in drivers/gpu/. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-04-11drm/radeon: only add the mm i2c bus if the hw_i2c module param is setAlex Deucher
It seems it can corrupt the monitor EDID in certain cases on certain boards when running sensors detect. It's rarely used anyway outside of AIW boards. http://lists.lm-sensors.org/pipermail/lm-sensors/2012-April/035847.html http://lists.freedesktop.org/archives/xorg/2011-January/052239.html Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-21drm/radeon: use DDC_ADDR instead of hard-coding itMatt Turner
Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-03drm/radeon/kms/dce3+: add support for hw i2c using atomAlex Deucher
Starting with DCE3 hardware, atom contains a general purpose ProcessI2cChannelTransaction similar to ProcessAuxChannelTransaction. Add an implementation using the atom tables for DCE3+ hardware. This should be a little less CPU intensive than bit banging and may work better in certain cases. Enable it by setting the radeon hw_i2c module parameter to 1. E.g., radeon.hw_i2c=1 on the kernel command line in grub. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-03drm/radeon/kms: Use the standard VESA timeout for DDC channelsJean Delvare
The VESA specification suggests a 2.2 ms timeout on DDC channels. Use exactly that (as the i915 driver does) instead of hard-coding a jiffy count. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Keith Packard <keithp@keithp.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-03drm/kms: Make i2c buses fasterJean Delvare
A udelay value of 20 leads to an I2C bus running at only 25 kbps. I2C devices can typically operate faster than this, 50 kbps should be fine for all devices (and compliant devices can always stretch the clock if needed.) FWIW, the vast majority of framebuffer drivers set udelay to 10 already. So set it to 10 in DRM drivers too, this will make EDID block reads faster. We might even lower the udelay value later if no problem is reported. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Cc: Keith Packard <keithp@keithp.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-01drm/radeon/kms: Fix device tree linkage of DP i2c buses tooJean Delvare
Properly set the parent device of DP i2c buses before registering them too. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-30drm/radeon/kms: Fix device tree linkage of i2c busesJean Delvare
Properly set the parent device of i2c buses before registering them so that they will show at the right place in the device tree (rather than in /sys/devices directly.) Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (40 commits) vmwgfx: Snoop DMA transfers with non-covering sizes vmwgfx: Move the prefered mode first in the list vmwgfx: Unreference surface on cursor error path vmwgfx: Free prefered mode on error path vmwgfx: Use pointer return error codes vmwgfx: Fix hw cursor position vmwgfx: Infrastructure for explicit placement vmwgfx: Make the preferred autofit mode have a 60Hz vrefresh vmwgfx: Remove screen object active list vmwgfx: Screen object cleanups drm/radeon/kms: consolidate GART code, fix segfault after GPU lockup V2 drm/radeon/kms: don't poll forever if MC GDDR link training fails drm/radeon/kms: fix DP setup on TRAVIS bridges drm/radeon/kms: set HPD polarity in hpd_init() drm/radeon/kms: add MSI module parameter drm/radeon/kms: Add MSI quirk for Dell RS690 drm/radeon/kms: Add MSI quirk for HP RS690 drm/radeon/kms: split MSI check into a separate function vmwgfx: Reinstate the update_layout ioctl drm/radeon/kms: always do extended edid probe ...
2011-11-01drm/radeon/kms: always do extended edid probeAlex Deucher
Rather than having a quirk list just always check the EDID header when probing. This is the recommended behavior according to the display team. This avoids problems with improperly terminated i2c lines on some boards. This is also what the proprietary driver does. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-31gpu: Add export.h as required to drivers/gpu files.Paul Gortmaker
They need this to get all the EXPORT_SYMBOL variants and THIS_MODULE Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-18drm/radeon/kms: Simplify I2C post_xfer functionJean Delvare
There is no point in re-doing in post_xfer all the initialization that was already done by pre_xfer. Instead, only do the work which differs from pre_xfer. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC ↵Thomas Reim
Lines (here: Asus M2A-VM HDMI) Some integrated ATI Radeon chipset implementations with add-on HDMI card (e. g. Asus M2A-VM HDMI) indicate the availability of a DDC even when the add-on card is not plugged in or HDMI is disabled in BIOS setup. In this case, drm_get_edid() and drm_edid_block_valid() periodically dump data and kernel errors into system log files and onto terminals. For these connectors DDC probing is extended by a check for a correct EDID header. Only in case a valid EDID header is also found, the (HDMI or DVI) connector will be used by the Radeon driver. This prevents the kernel driver from useless flooding of logs and terminal sessions with EDID dumps and error messages. This patch adds a flag 'requires_extended_probe' to the radeon_connector structure. In function radeon_connector_needs_extended_probe() this flag can be set on a chipset family/vendor/connector type specific basis. In addition, function radeon_ddc_probe() has been adapted to perform extended DDC probing if required by the connector's flag. Requires function drm_edid_header_is_valid() in DRM module provided by [PATCH] drm: Separate EDID Header Check from EDID Block Check. Tested for kernel 2.6.35, 2.6.38 and 3.0 on Asus M2A-VM HDMI board BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=668196 BugLink: http://bugs.launchpad.net/bugs/7228066 Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-04drm/radeon/kms: set i2c adapter class to I2C_CLASS_DDCAlex Deucher
The most common use of the radeon i2c buses is for ddc. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-15drm/radeon/kms: add connectors even if i2c failsAlex Deucher
Sometimes the i2c test in i2c_bit_add_bus fails if this happens we fail to register the i2c adapter and eventually fail to add the connector. If i2c fails, add the connector to the user can at least force it on. Note that some distros set i2c-algo-bit.bit_test to 1 by default which sometimes fails preventing the ddc i2c adapter from being added. The i2c adapter works even if the bit test fails, probably due to pre/post_xfer not getting called in the test_bit function. I have another patch to follow up on that. See: https://bugs.freedesktop.org/show_bug.cgi?id=36221 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-09drm/radeon/kms: make radeon i2c put/get bytes less noisyAlex Deucher
Switch some errors to debug output. These are generally harmless and tend to confuse users. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-19drm/radeon/kms: i2c s/sprintf/snprintf/g for safetyAlex Deucher
As per advice from Jean Delvare. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms: register an i2c adapter name for the dp aux busAlex Deucher
This causes the connector to not be added since i2c init fails for the adapter. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=31688 Noticed by Ari Savolainen. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Ari Savolainen <ari.m.savolainen@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drm/radeon/kms: fix bugs in ddc and cd path router codeTyson Whitehead
This is a follow on to: 2b5b1d7da9583484b3a9e7e375a90ca0e8ca07c2 (drm/radeon/kms: add support for clock/data path routers) That patch completed mux support for ddc and cd line routing between connectors. This patch fixes an indexing typo that was resulting in the atom bios router objects not always being walked, ensures the validity entries for the reused router structure are reset for every connector object walked, and corrects the masking operations used to update the mux control bits. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=31339 Signed-off-by: Tyson Whitehead <twhitehead@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drm/radeon/kms: add support for clock/data path routersAlex Deucher
This is a follow on to: 26b5bc986423cf3887e09188cb662ed651c5374d (drm/radeon/kms: add support for router objects) That patch added support for systems that use a mux to control the ddc line routing between the connectors. This patch adds support for systems that use a mux to control the encoder clock and data path routing to the connectors. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=31339 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30drm/radeon/kms: use tracked values for sclk and mclkAlex Deucher
Rather than calling get_memory_clock and get_engine_clock, used the tracked values from the pm code. Calling the tables adds additional latency in the modesetting and pm paths. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-20drm/radeon/kms/DCE3+: switch pads to ddc mode when going i2cAlex Deucher
The pins for ddc and aux are shared so you need to switch the mode when doing ddc. The ProcessAuxChannel table already sets the pin mode to DP. This should fix unreliable ddc issues on DP ports using non-DP monitors. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: add support for router objectsAlex Deucher
router objects are found on systems that use a mux to control ddc line to connector routing or to control the actual clock and data routing from the chip to the connectors. This patch implements ddc line routing. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm/radeon/kms: unify i2c handlingAlex Deucher
Previously we added i2c buses as needed when enumerating connectors power management, etc. This only exposed the actual buses used and could have lead to the same buse getting created more than once if one buses was used for more than one purpose. This patch sets up all i2c buses on the card in one place and users of the buses just point back to the one instance. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-31drm/radeon/kms: add hw_i2c module optionAlex Deucher
Turn off hw i2c by default except for mm i2c which is hw only until we sort out the remaining prescale issues on older chips. hw i2c can be enabled with hw_i2c=1. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-31drm/radeon/kms: use new pre/post_xfer i2c bit algo hooksAlex Deucher
This allows us to remove the internal bit algo bus used by the radeon i2c algo. We now register a radeon algo adapter if the gpio line is hw capable and the hw inplementation is available, otherwise we register a bit algo adapter. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: fix i2c prescale calc on older radeonsAlex Deucher
Should fix fdo bug 26430 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15drm/radeon/kms: fix for hw i2cAlex Deucher
use the i2c pads to drive SDA Possible fix for fdo bug 26430 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11drm/radeon/kms/evergreen: adapt to i2c changesAlex Deucher
original evergreen patches we against a kernel tree without my radeon i2c algo changes. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11drm/radeon/kms: fix prescale calculationsAlex Deucher
Pre-pcie chips seem to use the reference clock rather than the sclk. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-09drm/radeon/kms: take the pm mutex when using hw i2cAlex Deucher
we need a constant sclk for i2c prescale. Also, get the current sclk when calculating prescale rather than using the default sclk. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-09drm/radeon/kms: add support for hw i2c on r1xx-r5xxAlex Deucher
wire hw i2c support into radeon i2c algo. fixes merged: - handle bus probing correctly - use meaningful error numbers - abort if transaction fails - The line mapping is different depending on the asic. - protect hw i2c engine with a mutex - rs300 doesn't have a pin select bit - r200 has a different pin select setup Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-05drm/radeon/kms: add radeon i2c algoAlex Deucher
Currently just a wrapper around bit algo Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08drm/radeon/kms: i2c reorgAlex Deucher
- keep the atom i2c id in the i2c rec - fix gpio regs for GPIO and MDGPIO on pre-avivo chips - track whether the i2c line is hw capable - track whether the i2c line uses the multimedia i2c block Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08drm/radeon/kms: initial radeon displayport portingDave Airlie
This is enough to retrieve EDID and DPCP. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02drm/radeon/kms: add support for external tmds on legacy boardsAlex Deucher
This enables initialization of external tmds chips on pre-atom and mac systems. Macs are untested. Also, some macs have single link tmds chips while others have dual link tmds chips. We need to figure out which ones have which. This gets external TMDS working on my RS485 and RV380. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02drm/radeon/kms: clean up i2cAlex Deucher
- Change reg/mask names to match what we use internally and in the bios - Clarify how i2c over gpio on radeon actually works Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02drm/radeon/kms: dont't pass a radeon_connector to radeon_i2c_do_lock()Alex Deucher
We need this for supporting things other than ddc on i2c. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-18drm: Remove memory debugging infrastructure.Eric Anholt
It hasn't been used in ages, and having the user tell your how much memory is being freed at free time is a recipe for disaster even if it was ever used. Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-15drm/radeon: introduce kernel modesetting for radeon hardwareJerome Glisse
Add kernel modesetting support to radeon driver, use the ttm memory manager to manage memory and DRM/GEM to provide userspace API. In order to avoid backward compatibility issue and to allow clean design and code the radeon kernel modesetting use different code path than old radeon/drm driver. When kernel modesetting is enabled the IOCTL of radeon/drm driver are considered as invalid and an error message is printed in the log and they return failure. KMS enabled userspace will use new API to talk with the radeon/drm driver. The new API provide functions to create/destroy/share/mmap buffer object which are then managed by the kernel memory manager (here TTM). In order to submit command to the GPU the userspace provide a buffer holding the command stream, along this buffer userspace have to provide a list of buffer object used by the command stream. The kernel radeon driver will then place buffer in GPU accessible memory and will update command stream to reflect the position of the different buffers. The kernel will also perform security check on command stream provided by the user, we want to catch and forbid any illegal use of the GPU such as DMA into random system memory or into memory not owned by the process supplying the command stream. This part of the code is still incomplete and this why we propose that patch as a staging driver addition, future security might forbid current experimental userspace to run. This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX (radeon up to X1950). Works is underway to provide support for R6XX, R7XX and newer hardware (radeon from HD2XXX to HD4XXX). Authors: Jerome Glisse <jglisse@redhat.com> Dave Airlie <airlied@redhat.com> Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-04 23:47:58 +0000