summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2015-09-29Add radeon suspend/resume quirk for HP Compaq dc5750.Jeffery Miller
commit 09bfda10e6efd7b65bcc29237bee1765ed779657 upstream. With the radeon driver loaded the HP Compaq dc5750 Small Form Factor machine fails to resume from suspend. Adding a quirk similar to other devices avoids the problem and the system resumes properly. Signed-off-by: Jeffery Miller <jmiller@neverware.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21drm/i915: Limit the number of loops for reading a split 64bit registerChris Wilson
commit acd29f7b22262d9e848393b9b6ae13eb42d22514 upstream. In I915_READ64_2x32 we attempt to read a 64bit register using 2 32bit reads. Due to the nature of the registers we try to read in this manner, they may increment between the two instruction (e.g. a timestamp counter). To keep the result accurate, we repeat the read if we detect an overflow (i.e. the upper value varies). However, some hardware is just plain flaky and may endless loop as the the upper 32bits are not stable. Just give up after a couple of tries and report whatever we read last. v2: Use the most recent values when erring out on an unstable register. Reported-by: russianneuromancer@ya.ru Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91906 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21drm/i915: Always mark the object as dirty when used by the GPUChris Wilson
commit 51bc140431e233284660b1d22c47dec9ecdb521e upstream. There have been many hard to track down bugs whereby userspace forgot to flag a write buffer and then cause graphics corruption or a hung GPU when that buffer was later purged under memory pressure (as the buffer appeared clean, its pages would have been evicted rather than preserved and any changes more recent than in the backing storage would be lost). In retrospect this is a rare optimisation against memory pressure, already the slow path. If we always mark the buffer as dirty when accessed by the GPU, anything not used can still be evicted cheaply (ideal behaviour for mark-and-sweep eviction) but we do not run the risk of corruption. For correct read serialisation, userspace still has to notify when the GPU writes to an object. However, there are certain situations under which userspace may wish to tell white lies to the kernel... Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kristian Høgsberg <krh@bitplanet.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: "Goel, Akash" <akash.goel@intel.co> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21drm/i915: Allow DSI dual link to be configured on any pipeGaurav K Singh
commit 824257857fd81f5e749831ff9cd63566b5a86abe upstream. Just like single link MIPI panels, similarly for dual link panels, pipe to be configured is based on the DVO port from VBT Block 2. In hardware, Port A is mapped with Pipe A and Port C is mapped with Pipe B. This issue got introduced in - commit 7e9804fdcffc650515c60f524b8b2076ee59e710 Author: Jani Nikula <jani.nikula@intel.com> Date: Fri Jan 16 14:27:23 2015 +0200 drm/i915/dsi: add drm mipi dsi host support Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21drm/qxl: validate monitors config modesJonathon Jongsma
commit bd3e1c7c6de9f5f70d97cdb6c817151c0477c5e3 upstream. Due to some recent changes in drm_helper_probe_single_connector_modes_merge_bits(), old custom modes were not being pruned properly. In current kernels, drm_mode_validate_basic() is called to sanity-check each mode in the list. If the sanity-check passes, the mode's status gets set to to MODE_OK. In older kernels this check was not done, so old custom modes would still have a status of MODE_UNVERIFIED at this point, and would therefore be pruned later in the function. As a result of this new behavior, the list of modes for a device always includes every custom mode ever configured for the device, with the largest one listed first. Since desktop environments usually choose the first preferred mode when a hotplug event is emitted, this had the result of making it very difficult for the user to reduce the size of the display. The qxl driver did implement the mode_valid connector function, but it was empty. In order to restore the old behavior where old custom modes are pruned, we implement a proper mode_valid function for the qxl driver. This function now checks each mode against the last configured custom mode and the list of standard modes. If the mode doesn't match any of these, its status is set to MODE_BAD so that it will be pruned as expected. Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21drm/i915: Preserve SSC earlierLukas Wunner
commit 69f92f67b68ab7028ffe15f0eea76b59f8859383 upstream. Commit 92122789b2d6 ("drm/i915: preserve SSC if previously set v3") added code to intel_modeset_gem_init to override the SSC status read from VBT with the SSC status set by BIOS. However, intel_modeset_gem_init is invoked *after* intel_modeset_init, which calls intel_setup_outputs, which *modifies* SSC status by way of intel_init_pch_refclk. So unlike advertised, intel_modeset_gem_init doesn't preserve the SSC status set by BIOS but whatever intel_init_pch_refclk decided on. This is a problem on dual gpu laptops such as the MacBook Pro which require either a handler to switch DDC lines, or the discrete gpu to proxy DDC/AUX communication: Both the handler and the discrete gpu may initialize after the i915 driver, and consequently, an LVDS connector may initially seem disconnected and the SSC therefore is disabled by intel_init_pch_refclk, but on reprobe the connector may turn out to be connected and the SSC must then be enabled. Due to 92122789b2d6 however, the SSC is not enabled on reprobe since it is assumed BIOS disabled it while in fact it was disabled by intel_init_pch_refclk. Also, because the SSC status is preserved so late, the preserved value only ever gets used on resume but not on panel initialization: intel_modeset_init calls intel_init_display which indirectly calls intel_panel_use_ssc via multiple subroutines, *before* the BIOS value overrides the VBT value in intel_modeset_gem_init (intel_panel_use_ssc is the sole user of dev_priv->vbt.lvds_use_ssc). Fix this by moving the code introduced by 92122789b2d6 from intel_modeset_gem_init to intel_modeset_init before the invocation of intel_setup_outputs and intel_init_display. Add a DRM_DEBUG_KMS as suggested way back by Jani: http://lists.freedesktop.org/archives/intel-gfx/2014-June/046666.html Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Paul Hordiienko <pvt.gord@gmail.com> [MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina] Tested-by: William Brown <william@blackhats.net.au> [MBP 8,2 2011 intel SNB + amd turks pre-retina] Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina] Tested-by: Bruno Bierbaumer <bruno@bierbaumer.net> [MBP 11,3 2013 intel HSW + nvidia GK107 retina -- work in progress] Fixes: 92122789b2d6 ("drm/i915: preserve SSC if previously set v3") Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21drm/radeon: fix HDMI quantization_range for pre-DCE5 asicsAlex Deucher
commit 86b7709d48f0df8796bddd7e1ce45c6fb7a7c6ec upstream. Support for output_csc is only available on DCE5 and newer so don't mess with the HDMI quantization_range on pre-DCE5 asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=83226 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21drm/radeon/native: Send out the full AUX addressAlex Deucher
commit 7040c399aea2b0213a9aefd73e507369a6d641d6 upstream. AUX addresses are 20 bits long. Send out the entire address instead of just the low 16 bits. Port of: drm/radeon/atom: Send out the full AUX address to radeon non-atom aux path Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21drm/radeon/atom: Send out the full AUX addressVille Syrjälä
commit 3f8340cc72c9a1a4b49bce7802afd7f248400ef5 upstream. AUX addresses are 20 bits long. Send out the entire address instead of just the low 16 bits. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21drm/i915: Check DP link status on long hpd tooVille Syrjälä
commit d14e7b6d1d8747826cb900db852351c550e00fdd upstream. We are no longer checkling the DP link status on long hpd. We used to do that from the .hot_plug() handler, but it was removed when MST got introduced. If there's no userspace we now fail to retrain the link if the sink power is toggled (or cable yanked and replugged), meaning the user is left staring at a blank screen. With the retraining put back that should be fixed. Also remove the leftover comment that referred to the old retraining from .hot_plug(). Fixes a regression introduced in: commit 0e32b39ceed665bfa4a77a4bc307b6652b991632 Author: Dave Airlie <airlied@redhat.com> Date: Fri May 2 14:02:48 2014 +1000 drm/i915: add DP 1.2 MST support (v0.7) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89453 Tested-by: Palmer Dabbelt <palmer@dabbelt.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91407 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89461 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89594 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85641 Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21drm/i915: apply the PCI_D0/D3 hibernation workaround everywhere on pre GEN6Imre Deak
commit 54875571bbfde00fc63741715c531cbb5246c3b2 upstream. commit da2bc1b9db3351addd293e5b82757efe1f77ed1d Author: Imre Deak <imre.deak@intel.com> Date: Thu Oct 23 19:23:26 2014 +0300 drm/i915: add poweroff_late handler introduced a regression on old platforms during hibernation. A workaround was added in commit ab3be73fa7b43f4c3648ce29b5fd649ea54d3adb Author: Imre Deak <imre.deak@intel.com> Date: Mon Mar 2 13:04:41 2015 +0200 drm/i915: gen4: work around hang during hibernation using an explicit blacklist for the GENs/BIOS vendors where the issue was reported. Later there we had reports of the same failure on platforms not on this list. To my best knowledge the correct thing to do is still to put the device to PCI D3 state during hibernation, see [1] and [2] for the reasons. This also aligns with our future plans to unify more the runtime and system suspend/resume paths. Since an exact blacklist seems to be impractical (multiple GENs and BIOS vendors are affected) apply the workaround on everything pre GEN6. [1] http://lists.freedesktop.org/archives/intel-gfx/2015-February/060710.html [2] https://lkml.org/lkml/2015/6/22/274 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95061 Reported-by: Ilya Tumaykin <itumaykin@gmail.com> Reported-by: Dirk Griesbach <spamthis@freenet.de> Reported-by: Pavel Machek <pavel@ucw.cz> Reported-by: Mikko Rapeli <mikko.rapeli@iki.fi> Tested-by: Mikko Rapeli <mikko.rapeli@iki.fi> Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21DRM - radeon: Don't link train DisplayPort on HPD until we get the dpcdStephen Chandler Paul
commit 924f92bf12bfbef3662619e3ed24a1cea7c1cbcd upstream. Most of the time this isn't an issue since hotplugging an adaptor will trigger a crtc mode change which in turn, causes the driver to probe every DisplayPort for a dpcd. However, in cases where hotplugging doesn't cause a mode change (specifically when one unplugs a monitor from a DisplayPort connector, then plugs that same monitor back in seconds later on the same port without any other monitors connected), we never probe for the dpcd before starting the initial link training. What happens from there looks like this: - GPU has only one monitor connected. It's connected via DisplayPort, and does not go through an adaptor of any sort. - User unplugs DisplayPort connector from GPU. - Change in HPD is detected by the driver, we probe every DisplayPort for a possible connection. - Probe the port the user originally had the monitor connected on for it's dpcd. This fails, and we clear the first (and only the first) byte of the dpcd to indicate we no longer have a dpcd for this port. - User plugs the previously disconnected monitor back into the same DisplayPort. - radeon_connector_hotplug() is called before everyone else, and tries to handle the link training. Since only the first byte of the dpcd is zeroed, the driver is able to complete link training but does so against the wrong dpcd, causing it to initialize the link with the wrong settings. - Display stays blank (usually), dpcd is probed after the initial link training, and the driver prints no obvious messages to the log. In theory, since only one byte of the dpcd is chopped off (specifically, the byte that contains the revision information for DisplayPort), it's not entirely impossible that this bug may not show on certain monitors. For instance, the only reason this bug was visible on my ASUS PB238 monitor was due to the fact that this monitor using the enhanced framing symbol sequence, the flag for which is ignored if the radeon driver thinks that the DisplayPort version is below 1.1. Signed-off-by: Stephen Chandler Paul <cpaul@redhat.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-13drm/i915: Avoid TP3 on CHVThulasimani,Sivakumar
commit ed63baaf849e91c84ac3e042b1fd6a0af07c16f3 upstream. This patch removes TP3 support on CHV since there is no support for HBR2 on this platform. v2: rename the function to indicate it checks source rates (Jani) v3: update comment to indicate TP3 dependency on HBR2 supported hardware (Jani) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> [Jani: fixed a couple of checkpatch warnings.] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-13drm/i915: remove HBR2 from chv supported listThulasimani,Sivakumar
commit 5e86dfe39f54ab13fd8079ac3d6cb100318909a3 upstream. This patch removes 5.4Gbps from supported link rate for CHV since it is not supported in it. v2: change the ordering for better readability (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-13drm/i915: Flag the execlists context object as dirty after every useChris Wilson
commit 903ecd0bb970438c3a60c2c33ec9032d6443bf67 upstream. Everytime we use the logical context with execlists it becomes dirty (as the hardware will write the new register values afterwards, as well as the GPU state that will be used). We need to then flag the context as dirty everytime since after a swap-out/swap-in cycle the dirty flag will be cleared, and a further swap-out cycle will then loose the most recent GPU state. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-13drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP onlyThierry Reding
commit dbb3df2d58754e4df58620e60370d166c2cb6744 upstream. If PM is enabled but PM_SLEEP is disabled, the suspend/resume functions are still unused and produce a compiler warning. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-13drm/vmwgfx: Fix execbuf locking issuesThomas Hellstrom
commit 3e04e2fe6d87807d27521ad6ebb9e7919d628f25 upstream. This addresses two issues that cause problems with viewperf maya-03 in situation with memory pressure. The first issue causes attempts to unreserve buffers if batched reservation fails due to, for example, a signal pending. While previously the ttm_eu api was resistant against this type of error, it is no longer and the lockdep code will complain about attempting to unreserve buffers that are not reserved. The issue is resolved by avoid calling ttm_eu_backoff_reservation in the buffer reserve error path. The second issue is that the binding_mutex may be held when user-space fence objects are created and hence during memory reclaims. This may cause recursive attempts to grab the binding mutex. The issue is resolved by not holding the binding mutex across fence creation and submission. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-16drm/dp-mst: Remove debug WARN_ONDaniel Vetter
commit 42639ba554655c280ae6cb72df0522b1201f2961 upstream. Apparently been in there since forever and fairly easy to hit when hotplugging really fast. I can do that since my mst hub has a manual button to flick the hpd line for reprobing. The resulting WARNING spam isn't pretty. Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-16drm/radeon/combios: add some validation of lvds valuesAlex Deucher
commit 0a90a0cff9f429f886f423967ae053150dce9259 upstream. Fixes a broken hsync start value uncovered by: abc0b1447d4974963548777a5ba4a4457c82c426 (drm: Perform basic sanity checks on probed modes) The driver handled the bad hsync start elsewhere, but the above commit prevented it from getting added. bug: https://bugs.freedesktop.org/show_bug.cgi?id=91401 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-16drm/radeon: rework audio detect (v4)Alex Deucher
commit d0ea397e22f9ad0113c1dbdaab14eded050472eb upstream. 1. Always assign audio function pointers even if the display does not support audio. We need to properly disable the audio stream when when using a non-audio capable monitor. Fixes purple line on some hdmi monitors. 2. Check if a pin is in use by another encoder before disabling it. v2: make sure we've fetched the edid before checking audio and look up the encoder before calling audio_detect since connector->encoder may not be assigned yet. Separate pin and afmt. They are allocated at different times and have no dependency on eachother. v3: fix connector fetching in encoder functions v4: fix missed dig->pin check in dce6_afmt_write_latency_fields bugs: https://bugzilla.kernel.org/show_bug.cgi?id=93701 https://bugzilla.redhat.com/show_bug.cgi?id=1236337 https://bugs.freedesktop.org/show_bug.cgi?id=91041 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-16drm/i915: Replace WARN inside I915_READ64_2x32 with retry loopChris Wilson
commit ee0a227b7ac6e75f28e10269f81c7ec6eb600952 upstream. Since we may conceivably encounter situations where the upper part of the 64bit register changes between reads, for example when a timestamp counter overflows, change the WARN into a retry loop. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-16drm/i915: Declare the swizzling unknown for L-shaped configurationsChris Wilson
commit 5eb3e5a5e11d14f9deb2a4b83555443b69ab9940 upstream. The old style of memory interleaving swizzled upto the end of the first even bank of memory, and then used the remainder as unswizzled on the unpaired bank - i.e. swizzling is not constant for all memory. This causes problems when we try to migrate memory and so the kernel prevents migration at all when we detect L-shaped inconsistent swizzling. However, this issue also extends to userspace who try to manually detile into memory as the swizzling for an individual page is unknown (it depends on its physical address only known to the kernel), userspace cannot correctly swizzle. Note that this is a new attempt for the previously merged one, reverted in commit d82c0ba6e306f079407f07003e53c262d683397b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jul 14 12:29:27 2015 +0200 Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations" This is cc: stable since we need it to fix up troubles with wc cpu mmaps that userspace recently started to use widely. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Add note about previous (failed attempt).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-10drm/nouveau/drm/nv04-nv40/instmem: protect access to priv->heap by mutexKamil Dudka
commit 7512223b1ece29a5968ed8b67ccb891d21b7834b upstream. This fixes the list_del corruption reported at <https://bugzilla.redhat.com/1205985>. Signed-off-by: Kamil Dudka <kdudka@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-10drm/nouveau: hold mutex when calling nouveau_abi16_fini()Kamil Dudka
commit ac8c79304280da6ef05c348a9da03ab04898b994 upstream. This was the only access to cli->abi16 without holding the mutex. Signed-off-by: Kamil Dudka <kdudka@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-10drm/nouveau/kms/nv50-: guard against enabling cursor on disabled headsBen Skeggs
commit 697bb728d9e2367020aa0c5af7363809d7658e43 upstream. Userspace has started doing this, which upsets the display class hw error checking in various unpleasant ways. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-10drm/nouveau/fbcon/nv11-: correctly account for ring space usageIlia Mirkin
commit d108142c0840ce389cd9898aa76943b3fb430b83 upstream. The RING_SPACE macro accounts how much space is used up so it's important to ask it for the right amount. Incorrect accounting of this can cause page faults down the line as writes are attempted outside of the ring. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm: Stop resetting connector state to unknownDaniel Vetter
commit 5677d67ae3949f09f57357241b88222d49b8c782 upstream. It's causing piles of issues since we've stopped forcing full detect cycles in the sysfs interfaces with commit c484f02d0f02fbbfc6decc945a69aae011041a27 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Mar 6 12:36:42 2015 +0000 drm: Lighten sysfs connector 'status' The original justification for this was that the hpd handlers could use the unknown state as a hint to force a full detection. But current i915 code isn't doing that any more, and no one else really uses reset on resume. So instead just keep the old state around. References: http://article.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/62584 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100641 Cc: Rui Matos <tiagomatos@gmail.com> Cc: Julien Wajsberg <felash@gmail.com> Cc: kuddel.mail@gmx.de Cc: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Rob Clark <robdclark@gmail.com> Tested-by: Rui Tiago Cação Matos <tiagomatos@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm: Provide compat ioctl for addfb2.1Tvrtko Ursulin
commit c631d5f90e7ee246536c72f80ade86e9ef4d2f13 upstream. Frame buffer modifiers extensions provided in; commit e3eb3250d84ef97b766312345774367b6a310db8 Author: Rob Clark <robdclark@gmail.com> Date: Thu Feb 5 14:41:52 2015 +0000 drm: add support for tiled/compressed/etc modifier in addfb2 Missed the structure packing/alignment problem where 64-bit members were added after the odd number of 32-bit ones. This makes the compiler produce structures of different sizes under 32- and 64-bit x86 targets and makes the ioctl need explicit compat handling. v2: Removed the typedef. (Daniel Vetter) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Rob Clark <robdclark@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Daniel Vetter <daniel.vetter@intel.com> [danvet: Squash in compile fix from Mika.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm: add a check for x/y in drm_mode_setcrtcZhao Junwang
commit 01447e9f04ba1c49a9534ae6a5a6f26c2bb05226 upstream. legacy setcrtc ioctl does take a 32 bit value which might indeed overflow the checks of crtc_req->x > INT_MAX and crtc_req->y > INT_MAX aren't needed any more with this v2: -polish the annotation according to Daniel's comment Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Zhao Junwang <zhjwpku@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/rockchip: use drm_gem_mmap helpersDaniel Kurtz
commit 41315b793e13f884cda79389f0d5d44d027e57d1 upstream. Rather than (incompletely [0]) re-implementing drm_gem_mmap() and drm_gem_mmap_obj() helpers, call them directly from the rockchip mmap routines. Once the core functions return successfully, the rockchip mmap routines can still use dma_mmap_attrs() to simply mmap the entire buffer. [0] Previously, we were performing the mmap() without first taking a reference on the underlying gem buffer. This could leak ptes if the gem object is destroyed while userspace is still holding the mapping. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/radeon/ci: silence a harmless PCC warningAlex Deucher
commit bda5e3e97ffe80c5a793383df5681d3581d46ac8 upstream. This has been a source of confusion. Make it debug only. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/radeon: fix user ptr race conditionChristian König
commit 12f1384da650bdb835fff63e66fe815ea882fc0e upstream. Port of amdgpu patch 9298e52f8b51d1e4acd68f502832f3a97f8cf892. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/radeon: add a dpm quirk for Sapphire Radeon R9 270X 2GB GDDR5Alex Deucher
commit 5dfc71bc44d91d1620505c064fa22b0b3db58a9d upstream. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/radeon: Don't flush the GART TLB if rdev->gart.ptr == NULLMichel Dänzer
commit 233709d2cd6bbaaeda0aeb8d11f6ca7f98563b39 upstream. This can be the case when the GPU is powered off, e.g. via vgaswitcheroo or runpm. When the GPU is powered up again, radeon_gart_table_vram_pin flushes the TLB after setting rdev->gart.ptr to non-NULL. Fixes panic on powering off R7xx GPUs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61529 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/radeon: unpin cursor BOs on suspend and pin them again on resume (v2)Grigori Goronzy
commit f3cbb17bcf676a2fc6aedebe9fbebd59e550c51a upstream. Everything is evicted from VRAM before suspend, so we need to make sure all BOs are unpinned and re-pinned after resume. Fixes broken mouse cursor after resume introduced by commit b9729b17. [Michel Dänzer: Add pinning BOs on resume] v2: [Alex Deucher: merge cursor unpin into fb unpin loop] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100541 Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/radeon: Clean up reference counting and pinning of the cursor BOsMichel Dänzer
commit cd404af0c930104462aa91344f07d002cf8248ed upstream. Take a GEM reference for and pin the new cursor BO, unpin and drop the GEM reference for the old cursor BO in radeon_crtc_cursor_set2, and use radeon_crtc->cursor_addr in radeon_set_cursor. This fixes radeon_cursor_reset accidentally incrementing the cursor BO pin count, and cleans up the code a little. Reviewed-by: Grigori Goronzy <greg@chown.ath.cx> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/radeon: Handle irqs only based on irq ring, not irq status regs.Mario Kleiner
commit 07f18f0bb8d8d65badd8b4988b40d329fc0cc6dc upstream. Trying to resolve issues with missed vblanks and impossible values inside delivered kms pageflip completion events showed that radeon's irq handling sometimes doesn't handle valid irqs, but silently skips them. This was observed for vblank interrupts. Although those irqs have corresponding events queued in the gpu's irq ring at time of interrupt, and therefore the corresponding handling code gets triggered by these events, the handling code sometimes silently skipped processing the irq. The reason for those skips is that the handling code double-checks for each irq event if the corresponding irq status bits in the irq status registers are set. Sometimes those bits are not set at time of check for valid irqs, maybe due to some hardware race on some setups? The problem only seems to happen on some machine + card combos sometimes, e.g., never happened during my testing of different PC cards of the DCE-2/3/4 generation a year ago, but happens consistently now on two different Apple Mac cards (RV730, DCE-3, Apple iMac and Evergreen JUNIPER, DCE-4 in a Apple MacPro). It also doesn't happen at each interrupt but only occassionally every couple of hundred or thousand vblank interrupts. This results in XOrg warning messages like "[ 7084.472] (WW) RADEON(0): radeon_dri2_flip_event_handler: Pageflip completion event has impossible msc 420120 < target_msc 420121" as well as skipped frames and problems for applications that use kms pageflip events or vblank events, e.g., users of DRI2 and DRI3/Present, Waylands Weston compositor, etc. See also https://bugs.freedesktop.org/show_bug.cgi?id=85203 After some talking to Alex and Michel, we decided to fix this by turning the double-check for asserted irq status bits into a warning. Whenever a irq event is queued in the IH ring, always execute the corresponding interrupt handler. Still check the irq status bits, but only to log a DRM_DEBUG message on a mismatch. This fixed the problems reliably on both previously failing cards, RV-730 dual-head tested on both crtcs (pipes D1 and D2) and a triple-output Juniper HD-5770 card tested on all three available crtcs (D1/D2/D3). The r600 and evergreen irq handling is therefore tested, but the cik an si handling is only compile tested due to lack of hw. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> CC: Michel Dänzer <michel.daenzer@amd.com> CC: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/radeon: fix HDP flushingGrigori Goronzy
commit 54e03986133468e02cb01b76215e4d53a9cf6380 upstream. This was regressed by commit 39e7f6f8, although I don't know of any actual issues caused by it. The storage domain is read without TTM locking now, but the lock never helped to prevent any races. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/radeon: only check the sink type on DP connectorsAlex Deucher
commit 479e9a95120aaae0bf0d3e0b5b26b36ac4a347b6 upstream. Avoids a crash on pre-DP asics that support HDMI. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03Revert "drm/radeon: dont switch vt on suspend"Alex Deucher
commit ac9134906b3f5c2b45dc80dab0fee792bd516d52 upstream. This reverts commit b9729b17a414f99c61f4db9ac9f9ed987fa0cbfe. This seems to break the cursor on resume for lots of systems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/radeon: SDMA fix hibernation (CI GPU family).Jérôme Glisse
commit 2ba8d1bb8f6b589037f7db1f01144fc80750e8f7 upstream. In order for hibernation to reliably work we need to properly turn off the SDMA block, sadly after numerous attemps i haven't not found proper sequence for clean and full shutdown. So simply reset both SDMA block, this makes hibernation works reliably on sea island GPU family (CI) Hibernation and suspend to ram were tested (several times) on : Bonaire Hawaii Mullins Kaveri Kabini Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/radeon: compute ring fix hibernation (CI GPU family) v2.Jérôme Glisse
commit 161569deaa03cf3c00ed63352006193f250b0648 upstream. In order for hibernation to reliably work we need to cleanup more thoroughly the compute ring. Hibernation is different from suspend resume as when we resume from hibernation the hardware is first fully initialize by regular kernel then freeze callback happens (which correspond to a suspend inside the radeon kernel driver) and turn off each of the block. It turns out we were not cleanly shutting down the compute ring. This patch fix that. Hibernation and suspend to ram were tested (several times) on : Bonaire Hawaii Mullins Kaveri Kabini Changed since v1: - Factor the ring stop logic into a function taking ring as arg. Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/i915: Use two 32bit reads for select 64bit REG_READ ioctlsChris Wilson
commit 648a9bc5308d952f2c80772301b339f73026f013 upstream. Since the hardware sometimes mysteriously totally flummoxes the 64bit read of a 64bit register when read using a single instruction, split the read into two instructions. Since the read here is of automatically incrementing timestamp counters, we also have to be very careful in order to make sure that it does not increment between the two instructions. However, since userspace tried to workaround this issue and so enshrined this ABI for a broken hardware read and in the process neglected that the read only fails in some environments, we have to introduce a new uABI flag for userspace to request the 2x32 bit accurate read of the timestamp. v2: Fix alignment check and include details of the workaround for userspace. Reported-by: Karol Herbst <freedesktop@karolherbst.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91317 Testcase: igt/gem_reg_read Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Tested-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations"Daniel Vetter
commit d82c0ba6e306f079407f07003e53c262d683397b upstream. This reverts commit 19ee835cdb0b5a8eb11a68f25a51b8039d564488. It breaks existing old userspace which doesn't handle UNKNOWN swizzling correct. Yes UNKNOWN was a thing back in 2009 and probably still is on some other platforms, but it still pretty clearly broke the testers machine. If we want this we need to extend the ioctl with new paramters that only new userspace looks at. Cc: Harald Arnesen <harald@skogtun.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Harald Arnesen <harald@skogtun.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/i915: Forward all core DRM ioctls to core compat handlingTvrtko Ursulin
commit ac7e7ab1c3243b10b41653cc8d8536088d83b152 upstream. Previously only core DRM ioctls under the DRM_COMMAND_BASE were being forwarded, but the drm.h header suggests (and reality confirms) ones after (and including) DRM_COMMAND_END should be forwarded as well. We need this to correctly forward the compat ioctl for the botched-up addfb2.1 extension. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> [danvet: Explain why this is suddenly needed and add cc: stable.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/i915: Snapshot seqno of most recently submitted request.Tomas Elf
commit 94f7bbe1509731bdef651d7fb235b2c31fb23be8 upstream. The hang checker needs to inspect whether or not the ring request list is empty as well as if the given engine has reached or passed the most recently submitted request. The problem with this is that the hang checker cannot grab the struct_mutex, which is required in order to safely inspect requests since requests might be deallocated during inspection. In the past we've had kernel panics due to this very unsynchronized access in the hang checker. One solution to this problem is to not inspect the requests directly since we're only interested in the seqno of the most recently submitted request - not the request itself. Instead the seqno of the most recently submitted request is stored separately, which the hang checker then inspects, circumventing the issue of synchronization from the hang checker entirely. This fixes a regression introduced in commit 44cdd6d219bc64f6810b8ed0023a4d4db9e0fe68 Author: John Harrison <John.C.Harrison@Intel.com> Date: Mon Nov 24 18:49:40 2014 +0000 drm/i915: Convert 'ring_idle()' to use requests not seqnos v2 (Chris Wilson): - Pass current engine seqno to ring_idle() from i915_hangcheck_elapsed() rather than compute it over again. - Remove extra whitespace. Issue: VIZ-5998 Signed-off-by: Tomas Elf <tomas.elf@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add regressing commit citation provided by Chris.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/i915: Declare the swizzling unknown for L-shaped configurationsChris Wilson
commit 19ee835cdb0b5a8eb11a68f25a51b8039d564488 upstream. The old style of memory interleaving swizzled upto the end of the first even bank of memory, and then used the remainder as unswizzled on the unpaired bank - i.e. swizzling is not constant for all memory. This causes problems when we try to migrate memory and so the kernel prevents migration at all when we detect L-shaped inconsistent swizzling. However, this issue also extends to userspace who try to manually detile into memory as the swizzling for an individual page is unknown (it depends on its physical address only known to the kernel), userspace cannot correctly swizzle objects. v2: Mark the global swizzling as unknown rather than adjust the value reported to userspace. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/i915: fix backlight after resume on 855gmJani Nikula
commit 2059ac3b1304cb6a82f9d90762dea9f556831627 upstream. Some 855gm models (at least ThinkPad X40) regressed because of commit b0cd324faed23d10d66ba6ade66579c681feef6f Author: Jani Nikula <jani.nikula@intel.com> Date: Wed Nov 12 16:25:43 2014 +0200 drm/i915: don't save/restore backlight hist ctl registers which tried to make our driver more robust by not blindly saving and restoring registers, but it failed to take into account commit 0eb96d6ed38430b72897adde58f5477a6b71757a Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Wed Oct 14 12:33:41 2009 -0700 drm/i915: save/restore BLC histogram control reg across suspend/resume Fix the regression by enabling hist ctl on gen2. v2: Improved the comment. v3: Improved the comment, again. Reported-and-tested-by: Philipp Gesang <phg@phi-gamma.net> References: http://mid.gmane.org/20150623222648.GD12335@acheron Fixes: b0cd324faed2 ("drm/i915: don't save/restore backlight hist ctl registers") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/i915: Fix IPS related flickerRodrigo Vivi
commit ac88cd738425e04dbed3706621cf613a00708834 upstream. We cannot let IPS enabled with no plane on the pipe: BSpec: "IPS cannot be enabled until after at least one plane has been enabled for at least one vertical blank." and "IPS must be disabled while there is still at least one plane enabled on the same pipe as IPS." This restriction apply to HSW and BDW. However a shortcut path on update primary plane function to make primary plane invisible by setting DSPCTRL to 0 was leting IPS enabled while there was no other plane enabled on the pipe causing flickerings that we were believing that it was caused by that other restriction where ips cannot be used when pixel rate is greater than 95% of cdclok. v2: Don't mess with Atomic path as pointed out by Ville. Reference: https://bugs.freedesktop.org/show_bug.cgi?id=85583 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03drm/i915/ppgtt: Break loop in gen8_ppgtt_clear_range failure pathMichel Thierry
commit 00245266b4be4fbe989ee073663f56716da6c1f3 upstream. If for some reason [1], the page directory/table does not exist, clear_range would end up in an infinite while loop. Introduced by commit 06fda602dbca ("drm/i915: Create page table allocators"). [1] This is already being addressed in one of Mika's patches: http://mid.gmane.org/1432314314-23530-17-git-send-email-mika.kuoppala@intel.com Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reported-by: John Harrison <john.c.harrison@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-06-01 16:59:14 +0000