summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2018-09-26drm/panel: type promotion bug in s6e8aa0_read_mtp_id()Dan Carpenter
[ Upstream commit cd0e0ca69109d025b1a1b6609f70682db62138b0 ] The ARRAY_SIZE() macro is type size_t. If s6e8aa0_dcs_read() returns a negative error code, then "ret < ARRAY_SIZE(id)" is false because the negative error code is type promoted to a high positive value. Fixes: 02051ca06371 ("drm/panel: add S6E8AA0 driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180704093807.s3lqsb2v6dg2k43d@kili.mountain Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26drm/amdkfd: Fix error codes in kfd_get_processWei Lu
[ Upstream commit e47cb828eb3fca3e8999a0b9aa053dda18552071 ] Return ERR_PTR(-EINVAL) if kfd_get_process fails to find the process. This fixes kernel oopses when a child process calls KFD ioctls with a file descriptor inherited from the parent process. Signed-off-by: Wei Lu <wei.lu2@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26drm/nouveau: tegra: Detach from ARM DMA/IOMMU mappingThierry Reding
[ Upstream commit b59fb482b52269977ee5de205308e5b236a03917 ] Depending on the kernel configuration, early ARM architecture setup code may have attached the GPU to a DMA/IOMMU mapping that transparently uses the IOMMU to back the DMA API. Tegra requires special handling for IOMMU backed buffers (a special bit in the GPU's MMU page tables indicates the memory path to take: via the SMMU or directly to the memory controller). Transparently backing DMA memory with an IOMMU prevents Nouveau from properly handling such memory accesses and causes memory access faults. As a side-note: buffers other than those allocated in instance memory don't need to be physically contiguous from the GPU's perspective since the GPU can map them into contiguous buffers using its own MMU. Mapping these buffers through the IOMMU is unnecessary and will even lead to performance degradation because of the additional translation. One exception to this are compressible buffers which need large pages. In order to enable these large pages, multiple small pages will have to be combined into one large (I/O virtually contiguous) mapping via the IOMMU. However, that is a topic outside the scope of this fix and isn't currently supported. An implementation will want to explicitly create these large pages in the Nouveau driver, so detaching from a DMA/IOMMU mapping would still be required. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-15drm/edid: Add 6 bpc quirk for SDC panel in Lenovo B50-80Kai-Heng Feng
commit 25da75043f8690fd083878447c91f289dfb63b87 upstream. Another panel that reports "DFP 1.x compliant TMDS" but it supports 6bpc instead of 8 bpc. Apply 6 bpc quirk for the panel to fix it. BugLink: https://bugs.launchpad.net/bugs/1788308 Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180823055332.7723-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-09drm/i915/userptr: reject zero user_sizeMatthew Auld
commit c11c7bfd213495784b22ef82a69b6489f8d0092f upstream. Operating on a zero sized GEM userptr object will lead to explosions. Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") Testcase: igt/gem_userptr_blits/input-checking Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180502195021.30900-1-matthew.auld@intel.com Cc: Loic <hackurx@opensec.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05udl-kms: fix crash due to uninitialized memoryMikulas Patocka
commit 09a00abe3a9941c2715ca83eb88172cd2f54d8fd upstream. We must use kzalloc when allocating the fb_deferred_io structure. Otherwise, the field first_io is undefined and it causes a crash. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05udl-kms: handle allocation failureMikulas Patocka
commit 542bb9788a1f485eb1a2229178f665d8ea166156 upstream. Allocations larger than PAGE_ALLOC_COSTLY_ORDER are unreliable and they may fail anytime. This patch fixes the udl kms driver so that when a large alloactions fails, it tries to do multiple smaller allocations. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05udl-kms: change down_interruptible to downMikulas Patocka
commit 8456b99c16d193c4c3b7df305cf431e027f0189c upstream. If we leave urbs around, it causes not only leak, but also memory corruption. This patch fixes the function udl_free_urb_list, so that it always waits for all urbs that are in progress. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05drm/imx: imx-ldb: check if channel is enabled before printing warningLucas Stach
[ Upstream commit c80d673b91a6c81d765864e10f2b15110ee900ad ] If the second LVDS channel has been disabled in the DT when using dual-channel mode we should not print a warning. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05drm/imx: imx-ldb: disable LDB on driver bindLucas Stach
[ Upstream commit b58262396fabd43dc869b576e3defdd23b32fe94 ] The LVDS signal integrity is only guaranteed when the correct enable sequence (first IPU DI, then LDB) is used. If the LDB display output was active before the imx-drm driver is loaded (like when a bootsplash was active) the DI will be disabled by the full IPU reset we do when loading the driver. The LDB control registers are not part of the IPU range and thus will remain unchanged. This leads to the LDB still being active when the DI is getting enabled, effectively reversing the required enable sequence. Fix this by also disabling the LDB on driver bind. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05drm/bridge: adv7511: Reset registers on hotplugSean Paul
[ Upstream commit 5f3417569165a8ee57654217f73e0160312f409c ] The bridge loses its hw state when the cable is unplugged. If we detect this case in the hpd handler, reset its state. Reported-by: Rob Clark <robdclark@gmail.com> Tested-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180703165648.120401-1-seanpaul@chromium.org Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24drm/nouveau/gem: off by one bugs in nouveau_gem_pushbuf_reloc_apply()Dan Carpenter
[ Upstream commit 7f073d011f93e92d4d225526b9ab6b8b0bbd6613 ] The bo array has req->nr_buffers elements so the > should be >= so we don't read beyond the end of the array. Fixes: a1606a9596e5 ("drm/nouveau: new gem pushbuf interface, bump to 0.0.16") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24drm/armada: fix colorkey mode propertyRussell King
[ Upstream commit d378859a667edc99e3473704847698cae97ca2b1 ] The colorkey mode property was not correctly disabling the colorkeying when "disabled" mode was selected. Arrange for this to work as one would expect. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24drm/exynos: decon5433: Fix WINCONx reset valueMarek Szyprowski
[ Upstream commit 7b7aa62c05eac9789c208b946f515983a9255d8d ] The only bits that should be preserved in decon_win_set_fmt() is WINCONx_ENWIN_F. All other bits depends on the selected pixel formats and are set by the mentioned function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24drm/exynos: decon5433: Fix per-plane global alpha for XRGB modesMarek Szyprowski
[ Upstream commit ab337fc274a1957ff0771f19e826c736253f7c39 ] Set per-plane global alpha to maximum value to get proper blending of XRGB and ARGB planes. This fixes the strange order of overlapping planes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24drm/exynos: gsc: Fix support for NV16/61, YUV420/YVU420 and YUV422 modesMarek Szyprowski
[ Upstream commit dd209ef809080ced903e7747ee3ef640c923a1d2 ] Fix following issues related to planar YUV pixel format configuration: - NV16/61 modes were incorrectly programmed as NV12/21, - YVU420 was programmed as YUV420 on source, - YVU420 and YUV422 were programmed as YUV420 on output. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24drm: mali-dp: Enable Global SE interrupts mask for DP500Alison Wang
[ Upstream commit 89610dc2c235e7b02bb9fba0ce247e12d4dde7cd ] In the situation that DE and SE aren’t shared the same interrupt number, the Global SE interrupts mask bit MASK_IRQ_EN in MASKIRQ must be set, or else other mask bits will not work and no SE interrupt will occur. This patch enables MASK_IRQ_EN for SE to fix this problem. Signed-off-by: Alison Wang <alison.wang@nxp.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06drm/vc4: Reset ->{x, y}_scaling[1] when dealing with uniplanar formatsBoris Brezillon
commit a6a00918d4ad8718c3ccde38c02cec17f116b2fd upstream. This is needed to ensure ->is_unity is correct when the plane was previously configured to output a multi-planar format with scaling enabled, and is then being reconfigured to output a uniplanar format. Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180724133601.32114-1-boris.brezillon@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03drm/gma500: fix psb_intel_lvds_mode_valid()'s return typeLuc Van Oostenryck
[ Upstream commit 2ea009095c6e7396915a1d0dd480c41f02985f79 ] The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it. Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid(). Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180424131458.2060-1-luc.vanoostenryck@gmail.com Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03drm/atomic: Handling the case when setting old crtc for planeSatendra Singh Thakur
[ Upstream commit fc2a69f3903dfd97cd47f593e642b47918c949df ] In the func drm_atomic_set_crtc_for_plane, with the current code, if crtc of the plane_state and crtc passed as argument to the func are same, entire func will executed in vein. It will get state of crtc and clear and set the bits in plane_mask. All these steps are not required for same old crtc. Ideally, we should do nothing in this case, this patch handles the same, and causes the program to return without doing anything in such scenario. Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com> Cc: Madhur Verma <madhur.verma@samsung.com> Cc: Hemanshu Srivastava <hemanshu.s@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1525326572-25854-1-git-send-email-satendra.t@samsung.com Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03drm/radeon: fix mode_valid's return typeLuc Van Oostenryck
[ Upstream commit 7a47f20eb1fb8fa8d7a8fe3a4fd8c721f04c2174 ] The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25drm/i915: Fix hotplug irq ack on i965/g4xVille Syrjälä
commit 96a85cc517a9ee4ae5e8d7f5a36cba05023784eb upstream. Just like with PIPESTAT, the edge triggered IIR on i965/g4x also causes problems for hotplug interrupts. To make sure we don't get the IIR port interrupt bit stuck low with the ISR bit high we must force an edge in ISR. Unfortunately we can't borrow the PIPESTAT trick and toggle the enable bits in PORT_HOTPLUG_EN as that act itself generates hotplug interrupts. Instead we just have to loop until we've cleared PORT_HOTPLUG_STAT, or we just give up and WARN. v2: Don't frob with PORT_HOTPLUG_EN Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180614175625.1615-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 0ba7c51a6fd80a89236f6ceb52e63f8a7f62bfd3) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-11drm/udl: fix display corruption of the last lineMikulas Patocka
commit 99ec9e77511dea55d81729fc80b6c63a61bfa8e0 upstream. The displaylink hardware has such a peculiarity that it doesn't render a command until next command is received. This produces occasional corruption, such as when setting 22x11 font on the console, only the first line of the cursor will be blinking if the cursor is located at some specific columns. When we end up with a repeating pixel, the driver has a bug that it leaves one uninitialized byte after the command (and this byte is enough to flush the command and render it - thus it fixes the screen corruption), however whe we end up with a non-repeating pixel, there is no byte appended and this results in temporary screen corruption. This patch fixes the screen corruption by always appending a byte 0xAF at the end of URB. It also removes the uninitialized byte. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13drm: set FMODE_UNSIGNED_OFFSET for drm filesDave Airlie
commit 76ef6b28ea4f81c3d511866a9b31392caa833126 upstream. Since we have the ttm and gem vma managers using a subset of the file address space for objects, and these start at 0x100000000 they will overflow the new mmap checks. I've checked all the mmap routines I could see for any bad behaviour but overall most people use GEM/TTM VMA managers even the legacy drivers have a hashtable. Reported-and-Tested-by: Arthur Marsh (amarsh04 on #radeon) Fixes: be83bbf8068 (mmap: introduce sane default mmap limits) Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06drm/i915: Disable LVDS on Radiant P845Ondrej Zary
commit b3fb22733ae61050f8d10a1d6a8af176c5c5db1a upstream. Radiant P845 does not have LVDS, only VGA. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105468 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180309222204.4771-1-linux@rainbow-software.org (cherry picked from commit 7f7105f99b75aca4f8c2a748ed6b82c7f8be3293) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06drm/psr: Fix missed entry in PSR setup time table.Dhinakaran Pandiyan
commit bdcc02cf1bb508fc700df7662f55058f651f2621 upstream. Entry corresponding to 220 us setup time was missing. I am not aware of any specific bug this fixes, but this could potentially result in enabling PSR on a panel with a higher setup time requirement than supported by the hardware. I verified the value is present in eDP spec versions 1.3, 1.4 and 1.4a. Fixes: 6608804b3d7f ("drm/dp: Add drm_dp_psr_setup_time()") Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Tarun Vyas <tarun.vyas@intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180511195145.3829-3-dhinakaran.pandiyan@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/rockchip: Respect page offset for PRIME mmap callsØrjan Eide
[ Upstream commit 57de50af162b67612da99207b061ade3239e57db ] When mapping external DMA-bufs through the PRIME mmap call, we might be given an offset which has to be respected. However for the internal DRM GEM mmap path, we have to ignore the fake mmap offset used to identify the buffer only. Currently the code always zeroes out vma->vm_pgoff, which breaks the former. This patch fixes the problem by moving the vm_pgoff assignment to a function that is used only for GEM mmap path, so that the PRIME path retains the original offset. Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Ørjan Eide <orjan.eide@arm.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180130202913.28724-4-thierry.escande@collabora.com Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/panel: simple: Fix the bus format for the Ontat panelEric Anholt
[ Upstream commit 5651e5e094591f479adad5830ac1bc45196a39b3 ] This fixes bad color output. When I was first testing the device I had the DPI hardware set to 666 mode, but apparently in the refactor to use the bus_format information from the panel driver, I failed to actually update the panel. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: e8b6f561b2ee ("drm/panel: simple: Add the 7" DPI panel from Adafruit") Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180309233332.1769-1-eric@anholt.net Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/imx: move arming of the vblank event to atomic_flushLucas Stach
[ Upstream commit 6a055b92de15af987b4027826d43aa103c65a3c4 ] Right now the vblank event completion is racing with the atomic update, which is especially bad when the PRE is in use, as one of the hardware issue workaround might extend the atomic commit for quite some time. If the vblank IRQ happens to trigger during that time, we will prematurely signal the atomic commit completion to userspace, which causes tearing when userspace re-uses a framebuffer we haven't managed to flip away from yet. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/sun4i: Fix dclk_set_phaseGiulio Benetti
[ Upstream commit e64b6afa98f3629d0c0c46233bbdbe8acdb56f06 ] Phase value is not shifted before writing. Shift left of 28 bits to fit right bits Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/1519836413-35023-1-git-send-email-giulio.benetti@micronovasrl.com Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30virtio-gpu: fix ioctl and expose the fixed status to userspace.Dave Airlie
[ Upstream commit 9a191b114906457c4b2494c474f58ae4142d4e67 ] This exposes to mesa that it can use the fixed ioctl for querying later cap sets, cap set 1 is forever frozen in time. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180221015003.22884-1-airlied@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/exynos: fix comparison to bitshift when dealing with a maskWolfram Sang
[ Upstream commit 1293b6191010672c0c9dacae8f71c6f3e4d70cbe ] Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/exynos: g2d: use monotonic timestampsArnd Bergmann
[ Upstream commit a588a8bb7b25a3fb4f7fed00feb7aec541fc2632 ] The exynos DRM driver uses real-time 'struct timeval' values for exporting its timestamps to user space. This has multiple problems: 1. signed seconds overflow in y2038 2. the 'struct timeval' definition is deprecated in the kernel 3. time may jump or go backwards after a 'settimeofday()' syscall 4. other DRM timestamps are in CLOCK_MONOTONIC domain, so they can't be compared 5. exporting microseconds requires a division by 1000, which may be slow on some architectures. The code existed in two places before, but the IPP portion was removed in 8ded59413ccc ("drm/exynos: ipp: Remove Exynos DRM IPP subsystem"), so we no longer need to worry about it. Ideally timestamps should just use 64-bit nanoseconds instead, but of course we can't change that now. Instead, this tries to address the first four points above by using monotonic 'timespec' values. According to Tobias Jakobi, user space doesn't care about the timestamp at the moment, so we can change the format. Even if there is something looking at them, it will work just fine with monotonic times as long as the application only looks at the relative values between two events. Link: https://patchwork.kernel.org/patch/10038593/ Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/nouveau/pmu/fuc: don't use movw directly anymoreKarol Herbst
[ Upstream commit fe9748b7b41cee11f8db57fb8b20bc540a33102a ] Fixes failure to compile with recent envyas as a result of the 'movw' alias being removed for v5. A bit of history: v3 only has a 16-bit sign-extended immediate mov op. In order to set the high bits, there's a separate 'sethi' op. envyas validates that the value passed to mov(imm) is between -0x8000 and 0x7fff. In order to simplify macros that load both the low and high word, a 'movw' alias was added which takes an unsigned 16-bit immediate. However the actual hardware op still sign extends. v5 has a full 32-bit immediate mov op. The v3 16-bit immediate mov op is gone (loads 0 into the dst reg). However due to a bug in envyas, the movw alias still existed, and selected the no-longer-present v3 16-bit immediate mov op. As a result usage of movw on v5 is the same as mov with a 0x0 argument. The proper fix throughout is to only ever use the 'movw' alias in combination with 'sethi'. Anything else should get the sign-extended validation to ensure that the intended value ends up in the destination register. Changes in fuc3 binaries is the result of a different encoding being selected for a mov with an 8-bit value. v2: added commit message written by Ilia, thanks for that! v3: messed up rebasing, now it should apply Signed-off-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macrosThomas Hellstrom
commit 938ae7259c908ad031da35d551da297640bb640c upstream. Depending on whether the kernel is compiled with frame-pointer or not, the temporary memory location used for the bp parameter in these macros is referenced relative to the stack pointer or the frame pointer. Hence we can never reference that parameter when we've modified either the stack pointer or the frame pointer, because then the compiler would generate an incorrect stack reference. Fix this by pushing the temporary memory parameter on a known location on the stack before modifying the stack- and frame pointers. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel logFlorent Flament
commit e8f48f96db7e482995743f461b3e8a5c1a102533 upstream. Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` in kernel log at boot time. Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power on its screen during Intel i915 DRM initialization. This currently results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on` message appearing in the kernel log during boot time and when stopping the machine. This change increases the timeout of the `intel_enable_lvds` function from 1 to 5 seconds, letting enough time for the Satellite 930 LCD screen to power on, and suppressing the error message from the kernel log. This patch has been successfully tested on Linux 4.14 running on a Toshiba Satellite Z930. [vsyrjala: bump the timeout from 2 to 5 seconds to match the DP code and properly cover the max hw timeout of ~4 seconds, and drop the comment about the specific machine since this is not a particulary surprising issue, nor specific to that one machine] Signed-off-by: Florent Flament <contact@florentflament.com> Cc: stable@vger.kernel.org Cc: Pavel Petrovic <ppetrovic@acm.org> Cc: Sérgio M. Basto <sergio@serjux.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414 References: https://bugzilla.kernel.org/show_bug.cgi?id=57591 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419160700.19828-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 280b54ade5914d3b4abe4f0ebe083ddbd4603246) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16drm/vc4: Fix scaling of uni-planar formatsBoris Brezillon
commit 9a0e9802217291e54c4dd1fc5462f189a4be14ec upstream. When using uni-planar formats (like RGB), the scaling parameters are stored in plane 0, not plane 1. Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180507121303.5610-1-boris.brezillon@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-09drm/bridge: vga-dac: Fix edid memory leakSean Paul
commit 49ceda9de2da4d1827941d06701f3017c27c1855 upstream. edid should be freed once it's finished being used. Fixes: 56fe8b6f4991 ("drm/bridge: Add RGB to VGA bridge support") Cc: Rob Herring <robh@kernel.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: <stable@vger.kernel.org> # v4.9+ Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180420190007.1572-1-seanpaul@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-09drm/vmwgfx: Fix a buffer object leakThomas Hellstrom
commit 13f149d47392782baafd96d54d4e65f3b5ca342f upstream. A buffer object leak was introduced when fixing a premature buffer object release. Fix this. Cc: <stable@vger.kernel.org> Fixes: 73a88250b709 ("Fix a destoy-while-held mutex problem.") Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-01drm/amdgpu: set COMPUTE_PGM_RSRC1 for SGPR/VGPR clearing shadersNicolai Hähnle
commit 75569c182e4f65cd8826a5853dc9cbca703cbd0e upstream. Otherwise, the SQ may skip some of the register writes, or shader waves may be allocated where we don't expect them, so that as a result we don't actually reset all of the register SRAMs. This can lead to spurious ECC errors later on if a shader uses an uninitialized register. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-01drm/virtio: fix vq wait_event conditionGerd Hoffmann
commit d02d270014f70dcab0117776b81a37b6fca745ae upstream. Wait until we have enough space in the virt queue to actually queue up our request. Avoids the guest spinning in case we have a non-zero amount of free entries but not enough for the request. Cc: stable@vger.kernel.org Reported-by: Alain Magloire <amagloire@blackberry.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180403095904.11152-1-kraxel@redhat.com Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-29drm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changingImre Deak
commit 5e1df40f40ee45a97bb1066c3d71f0ae920a9672 upstream. Currently we see sporadic timeouts during CDCLK changing both on BXT and GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by changing the frequency in a tight loop after blanking the display. The upper bound for the completion time is 800us based on my tests, so increase it from the current 500us to 2ms; with that I couldn't trigger the problem either on BXT or GLK. Note that timeouts happened during both the change notification and the voltage level setting PCODE request. (For the latter one BSpec doesn't require us to wait for completion before further HW programming.) This issue is similar to commit 2c7d0602c815 ("drm/i915/gen9: Fix PCODE polling during CDCLK change notification") but there the PCODE request does complete (as shown by the mbox busy flag), only the reply we get from PCODE indicates a failure. So there we keep resending the request until a success reply, here we just have to increase the timeout for the one PCODE request we send. v2: - s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.9 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.deak@intel.com (cherry picked from commit e76019a81921e87a4d9e7b3d86102bc708a6c227) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (Rebased for v4.9 stable tree due to upstream intel_cdclk.c, cdclk_state and pcu_lock change) Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-29drm/i915: Fix LSPCON TMDS output buffer enabling from low-power stateImre Deak
commit 7eb2c4dd54ff841f2fe509a84973eb25fa20bda2 upstream. LSPCON adapters in low-power state may ignore the first I2C write during TMDS output buffer enabling, resulting in a blank screen even with an otherwise enabled pipe. Fix this by reading back and validating the written value a few times. The problem was noticed on GLK machines with an onboard LSPCON adapter after entering/exiting DC5 power state. Doing an I2C read of the adapter ID as the first transaction - instead of the I2C write to enable the TMDS buffers - returns the correct value. Based on this we assume that the transaction itself is sent properly, it's only the adapter that is not ready for some reason to accept this first write after waking from low-power state. In my case the second I2C write attempt always succeeded. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105854 Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180416155309.11100-1-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-29drm/vc4: Fix memory leak during BO teardownDaniel J Blueman
commit c0db1b677e1d584fab5d7ac76a32e1c0157542e0 upstream. During BO teardown, an indirect list 'uniform_addr_offsets' wasn't being freed leading to leaking many 128B allocations. Fix the memory leak by releasing it at teardown time. Cc: stable@vger.kernel.org Fixes: 6d45c81d229d ("drm/vc4: Add support for branching in shader validation.") Signed-off-by: Daniel J Blueman <daniel@quora.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180402071035.25356-1-daniel@quora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24drm/radeon: Fix PCIe lane width calculationPaul Parsons
commit 85e290d92b4b794d0c758c53007eb4248d385386 upstream. Two years ago I tried an AMD Radeon E8860 embedded GPU with the drm driver. The dmesg output included driver warnings about an invalid PCIe lane width. Tracking the problem back led to si_set_pcie_lane_width_in_smc(). The calculation of the lane widths via ATOM_PPLIB_PCIE_LINK_WIDTH_MASK and ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT macros did not increment the resulting value, per the comment in pptable.h ("lanes - 1"), and per usage elsewhere. Applying the increment silenced the warnings. The code has not changed since, so either my analysis was incorrect or the bug has gone unnoticed. Hence submitting this as an RFC. Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24drm/rockchip: Clear all interrupts before requesting the IRQMarc Zyngier
commit 5f9e93fed4d45e9a8f84728aff1a8f2ab8922902 upstream. Calling request_irq() followed by disable_irq() is usually a bad idea, specially if the interrupt can be pending, and you're not yet in a position to handle it. This is exactly what happens on my kevin system when rebooting in a second kernel using kexec: Some interrupt is left pending from the previous kernel, and we take it too early, before disable_irq() could do anything. Let's clear the pending interrupts as we initialize the HW, and move the interrupt request after that point. This ensures that we're in a sane state when the interrupt is requested. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> [adapted to recent rockchip-drm changes] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180220130120.5254-2-marc.zyngier@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24drm/amdgpu: Fix PCIe lane width calculationAlex Deucher
commit 41212e2fe72b26ded7ed78224d9eab720c2891e2 upstream. The calculation of the lane widths via ATOM_PPLIB_PCIE_LINK_WIDTH_MASK and ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT macros did not increment the resulting value, per the comment in pptable.h ("lanes - 1"), and per usage elsewhere. Port of the radeon fix to amdgpu. Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Chunming Zhou <david1.zhou@amd.com> Bug: https://bugs.freedesktop.org/show_bug.cgi?id=102553 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24drm/amdgpu: Fix always_valid bos multiple LRU insertions.Bas Nieuwenhuizen
commit a20ee0b1f8b42e2568f3a4408003d22b2dfcc706 upstream. If these bos are evicted and are in the validated list things blow up, so do not put them in there. Notably, that tries to add the bo to the LRU twice, which results in a BUG_ON in ttm_bo.c. While for the bo_list an alternative would be to not allow always valid bos in there, that does not work for the user fence. v2: Fixed whitespace issue pointed out by checkpatch.pl Signed-off-by: Bas Nieuwenhuizen <basni@chromium.org> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24drm/amdgpu: Add an ATPX quirk for hybrid laptopAlex Deucher
commit 13b40935cf64f59b93cf1c716a2033488e5a228c upstream. _PR3 doesn't seem to work properly, use ATPX instead. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104064 Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20radeon: hide pointless #warning when compile testingArnd Bergmann
commit c02216acf4177c4411d33735c81cad687790fa59 upstream. In randconfig testing, we sometimes get this warning: drivers/gpu/drm/radeon/radeon_object.c: In function 'radeon_bo_create': drivers/gpu/drm/radeon/radeon_object.c:242:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp] #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance \ This is rather annoying since almost all other code produces no build-time output unless we have found a real bug. We already fixed this in the amdgpu driver in commit 31bb90f1cd08 ("drm/amdgpu: shut up #warning for compile testing") by adding a CONFIG_COMPILE_TEST check last year and agreed to do the same here, but both Michel and I then forgot about it until I came across the issue again now. For stable kernels, as this is one of very few remaining randconfig warnings in 4.14. Cc: stable@vger.kernel.org Link: https://patchwork.kernel.org/patch/9550009/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-02-06 19:36:19 +0000