| Age | Commit message (Collapse) | Author |
|---|
|
On ADL-S the main DMC HRR event DMC_EVT_CTL/HTP are never
restored to their previous values during DC6 exit. This
angers assert_dmc_loaded(), and basically makes the HRR
handler unusable because we don't rewrite EVT_HTP when
enabling DMC events.
Let's just clear the HRR EVT_CTL/HTP to zero from the
beginnning so that the expected value matches the post-DC6
reality.
I suppose if we ever had actual use for HRR we'd have to both,
reject HRR+PSR, and reprogram EVT_HTP when enabling the event.
But for now we don't care about HRR so keeping both registers
zeroed is fine.
Cc: stable@vger.kernel.org
Tested-by: Petr Vorel <pvorel@suse.cz>
Fixes: 43175c92d403 ("drm/i915/dmc: Assert DMC is loaded harder")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15153
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251022100718.24803-2-ville.syrjala@linux.intel.com
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 4df3b340ff6e9f499735d8b52b96a9257fde3918)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
drm_{crtc,plane,connector,private_obj}_get_state() must not
be called after the atomic check phase. At that point the commit
has been carved in stone and no new objects must be introduced
into it. WARN if anyone attempts to violate this rule.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251017163327.9074-2-ville.syrjala@linux.intel.com
Reviewed-by: Maxime Ripard <mripard@kernel.org>
|
|
The crtc/plane/connector counterparts of
drm_atomic_get_private_obj_state() all WARN about a missing
acquire_ctx. Do the same in drm_atomic_get_private_obj_state()
for consistency.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251017163327.9074-1-ville.syrjala@linux.intel.com
Reviewed-by: Maxime Ripard <mripard@kernel.org>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-redundant explicit call to
pm_runtime_mark_last_busy().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-redundant explicit call to
pm_runtime_mark_last_busy().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Return -EINVAL when userspace asks us to enable vblank on a crtc that is
not yet enabled.
Suggested-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1856
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cb57b8cdb072dc37723b6906da1c37ff9cbc2da4)
Cc: stable@vger.kernel.org
|
|
[WHY & HOW]
Some eDP panels suffer from flicking when HDR is enabled in KDE or
Gnome.
This add another quirk to worksaround to skip VSC that is incompatible
with an eDP panel.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4452
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99441824bec63549a076cd86631d138ec9a0c71c)
Cc: stable@vger.kernel.org
|
|
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: e8529dbc75ca ("drm/amdgpu: add ip offset support for cyan skillfish")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 102c4f7c554ac5a5ecf0023fa0612beb58e3b0bd)
|
|
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: d1bb64651095 ("drm/amdgpu: add irq source ids for VCN5_0/JPEG5_0")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68c20d7b1779f97d600e61b9e95726c0cd609e2a)
|
|
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: 523b69c65445 ("drm/amd/include: Add amd cper header")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 72c5482cb0f3d3c772c9de50e5a4265258a53f81)
|
|
These should be MIT. The driver in general is MIT and
the license text at the top of the files is MIT so fix
it.
Fixes: 92d5d2a09de1 ("drm/amdgpu: Introduce funcs for populating CPER")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit abd3f876404cafb107cb34bacb74706bfee11cbe)
|
|
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18aafc59b106 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92b0a6ae6672857ddeabf892223943d2f0e06c97)
|
|
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18edef19ea44 ("drm/amd/powerplay: implement fw image related smu interface for Fiji.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c52238c9fb414555c68340cd80e487d982c1921c)
|
|
'table_index' is a variable defined by the smu driver (kmd)
'table_id' is a variable defined by the hw smu (pmfw)
This code should use table_index as a bounds check.
Fixes: caad2613dc4bd ("drm/amd/powerplay: move table setting common code to smu_cmn.c")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fca0c66b22303de0d1d6313059baf4dc960a4753)
|
|
disabled on DCN30
Before commit 33056a97ae5e ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
checked the low-power debug flag before calling
dpp3_power_on_blnd_lut(false).
After commit 33056a97ae5e ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
unconditionally calls dpp3_power_on_blnd_lut(false). The BLNDGAM power
helper writes BLNDGAM_MEM_PWR_FORCE when CM low-power is disabled, causing
immediate SRAM power toggles instead of deferring at vupdate. This can
disrupt atomic color/LUT sequencing during transitions between
direct scanout and composition within gamescope's DRM backend on
Steam Deck OLED.
To fix this, leave the BLNDGAM power state unchanged when low-power is
disabled, matching dpp3_power_on_hdr3dlut and dpp3_power_on_shaper.
Fixes: 33056a97ae5e ("drm/amd/display: Remove double checks for `debug.enable_mem_low_power.bits.cm`")
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 13ff4f63fcddfc84ec8632f1443936b00aa26725)
Cc: stable@vger.kernel.org
|
|
v1:
Pause the workload setting in dm when doinn idle optimization
v2:
Rebase patch to latest kernel code base (kernel 6.16)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bc6d54ac7e7436721a19443265f971f890c13cc5)
|
|
Since the allocation of the drivers main structure was changed to
devm_drm_dev_alloc() drm_put_dev()'ing to trigger it to be free'd
should be done by devres.
However, drm_put_dev() is still in the probe error and device remove
paths. When the driver fails to probe warnings like the following are
shown because devres is trying to drm_put_dev() after the driver
already did it.
[ 5.642230] radeon 0000:01:05.0: probe with driver radeon failed with error -22
[ 5.649605] ------------[ cut here ]------------
[ 5.649607] refcount_t: underflow; use-after-free.
[ 5.649620] WARNING: CPU: 0 PID: 357 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
Fixes: a9ed2f052c5c ("drm/radeon: change drm_dev_alloc to devm_drm_dev_alloc")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3eb8c0b4c091da0a623ade0d3ee7aa4a93df1ea4)
|
|
Since the allocation of the drivers main structure was changed to
devm_drm_dev_alloc() rdev is managed by devres and we shouldn't be calling
kfree() on it.
This fixes things exploding if the driver probe fails and devres cleans up
the rdev after we already free'd it.
Fixes: a9ed2f052c5c ("drm/radeon: change drm_dev_alloc to devm_drm_dev_alloc")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 16c0681617b8a045773d4d87b6140002fa75b03b)
|
|
[Why]
Newer VPE microcode has functionality that will decrease DPM level
only when a workload has run for 2 or more seconds. If VPE is turned
off before this DPM decrease and the PMFW doesn't reset it when
power gating VPE, the SOC can get stuck with a higher DPM level.
This can happen from amdgpu's ring buffer test because it's a short
quick workload for VPE and VPE is turned off after 1s.
[How]
In idle handler besides checking fences are drained check PMFW version
to determine if it will reset DPM when power gating VPE. If PMFW will
not do this, then check VPE DPM level. If it is not DPM0 reschedule
delayed work again until it is.
v2: squash in return fix (Alex)
Cc: Peyton.Lee@amd.com
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4615
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ac635367eb589bee8edcc722f812a89970e14b7)
Cc: stable@vger.kernel.org
|
|
A recent change fixed device reference leaks when looking up drm
platform device driver data during bind() but failed to remove a partial
fix which had been added by commit 80805b62ea5b ("drm/mediatek: Fix
kobject put for component sub-drivers").
This results in a reference imbalance on component bind() failures and
on unbind() which could lead to a user-after-free.
Make sure to only drop the references after retrieving the driver data
by effectively reverting the previous partial fix.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 1f403699c40f ("drm/mediatek: Fix device/node reference count leaks in mtk_drm_get_all_drm_priv")
Reported-by: Sjoerd Simons <sjoerd@collabora.com>
Closes: https://lore.kernel.org/r/20251003-mtk-drm-refcount-v1-1-3b3f2813b0db@collabora.com
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Sjoerd Simons <sjoerd@collabora.com>
Tested-by: Sjoerd Simons <sjoerd@collabora.com>
Tested-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20251006093937.27869-1-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add gpu metrics definition which is only a set of gpu metrics
attributes. A field is encoded by its id, type and number of instances.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Properly check the return values for function, as done elsewhere.
Signed-off-by: Sunday Clement <Sunday.Clement@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Now that DC supports analog connectors, there is nothing stopping
us from using it by default on Bonaire.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VRR is not supported on analog signals.
Don't add freesync modes to analog displays or when
VRR is unsupported by DC.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When the EDID of an analog display is not available, we can't
know the possible modes supported by the display. However, we
still need to offer the user to select from a variety of common
modes. It will be up to the user to select the best one, though.
This is how it works on other operating systems as well as the
legacy display code path in amdgpu.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This feature is useful for analog connections without EDID:
- Really old monitors with a VGA connector
- Cheap DVI/VGA adapters that don't connect DDC pins
When a connection is established through DAC load detection,
the driver is supposed to fill in the supported modes for the
display, which we already do in amdgpu_dm_connector_get_modes.
Also, because the load detection causes visible glitches, do not
attempt to poll the connector again after it was detected this
way. Note that it will still be polled after sleep/resume or
when force is enabled, which is okay.
v2:
Add dc_connection_dac_load connection type.
Properly release sink when no display is connected.
Don't print error when EDID isn't read from an analog display.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DAC_LoadDetection can be used to determine whether something
is connected to an analog connector by determining if there is
an analog load. This causes visible flickering on displays, so
we only resort to using this when the connected display doesn't
have an EDID.
For reference, see the legacy display code:
amdgpu_atombios_encoder_dac_load_detect
v2:
Only clear corresponding bit from BIOS_SCRATCH_0.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will be reused by DAC load detection.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The BIOS uses this register to write the results of the
DAC_LoadDetection command, so we'll need to read this
in order to make DAC load detection work.
As a reference, I used the mmBIOS_SCRATCH_0 definition from
the amdgpu legacy display code.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VGA connectors don't support any hotplug detection, so the kernel
needs to periodically poll them to see if a display is connected.
DVI-I connectors have hotplug detection for digital signals, and
some analog DVI cables pull up that pin to work with that.
However, in general not all DVI cables do this so we can't rely on
this feature, therefore we need to poll DVI-I connectors as well.
v2:
Call drm_kms_helper_poll_fini in amdgpu_dm_hpd_fini.
Disable/enable polling on suspend/resume.
Don't call full link detection when already connected.
v3:
Encounter CLANG build failure. Remove unused variable:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:980:7:
error: variable 'use_polling' set but not used [-Werror,-Wunused-but-
set-variable]
980 | bool use_polling = false;
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Prepare for polling analog connectors.
Document the function better.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Analog displays typically have a DDC connection which can be
used by the GPU to read EDID. This commit adds the capability
to probe analog displays using DDC, reading the EDID header and
deciding whether the analog link is connected based on the data
that was read.
Note that VGA has no HPD (hotplug detection), so we need to
to do analog link detection for VGA before checking HPD.
In case of DVI-I, while the connector supports HPD, not all
analog cables connect the HPD pins, so we can't rely on HPD
either.
For reference, see the legacy display code:
amdgpu_connector_vga_detect
amdgpu_display_ddc_probe
DAC load detection will be implemented in a separate commit.
v2:
Fix crash / black screen on newer GPUs during link detection.
Ignore HPD pin for analog connectors.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The dce110_hwseq is used by all DCE hardware,
so add the DAC support here.
When enabling/disabling a stream for a RGB signal,
this will call the VBIOS to enable/disable the DAC.
Additionally, when applying the controller context,
call SelectCRTC_Source from VBIOS in order to
direct the CRTC output to the DAC.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We support two kinds of analog connections:
1. DVI-I, which allows both digital and analog signals:
The DC code base only allows 1 encoder per connector, and the
preferred engine type is still going to be digital. So, for DVI-I
to work, we need to make sure the pre-existing link encoder can
also work with analog signals.
1. VGA, which only supports analog signals:
For VGA, we need to create a link encoder that only works with the
DAC without perturbing any digital transmitter functionality.
Since dce110_link_encoder already supports analog DVI-I,
just reuse that code for VGA as well.
v2:
Reduce code churn by reusing same link encoder for VGA and DVI-I.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add analog stream encoders for DCE which will be used when
connecting an analog display through VGA or DVI-I.
Considering that all stream encoder functions currently deal
with digital streams, there is nothing for an analog stream
encoder to do, making them basically a no-op.
That being said, we still need some kind of stream encoder to
represent an analog stream, and it is beneficial to split them
from digital stream encoders in the code to make sure they
don't accidentally write any DIG* registers.
On supported chips there is currently up to 1 analog encoder,
which is DACA. There are references to DACB in some code such
as VBIOS commands and register files but it seems to be
not present on DCE 6 and newer.
Set num_analog_stream_encoder = 1 so that we can support
the analog connectors on DCE 6-10, for now.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a num_analog_stream_encoders field to indicate how many
analog stream encoders are present. When analog stream encoders
are present, create them.
Additionally, add an analog_engine field to link encoders and
search for supported analog encoders in the BIOS for each link.
When connecting an RGB signal, search for analog stream encoders.
The actual DCE analog link and stream encoder is going to be
added in a subsequent commit.
v2:
Add check to see if an analog engine is really supported.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Avoid initializing DDC, HPD, etc. when we know that the link is
not going to be constructed because it has no supported encoders.
This is mainly useful for old GPUs which may have encoders such
as TRAVIS and NUTMEG that are not yet supported by DC.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VGA connectors don't have HPD (hotplug detection), so don't
touch any HPD related registers for VGA.
Determine whether hotplug detection is available by checking that
the interrupt source is invalid.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Analog video signals on VGA or DVI-A (analog part of DVI-I)
don't support audio, so avoid calling any audio related
functions on analog signals.
Stereo sync was not set up for analog signals in the legacy
display code either, so there is no loss of functionality if
we omit it from DC for now.
Also add a dc_is_rgb_signal similar to other dc_is_*_signal.
v2:
Added comment to clarify what we mean by RGB in this context.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We will use this for validating the pixel clock when
an analog monitor is connected to VGA or DVI-I connectors.
For reference, see the legacy display code:
amdgpu_connector_vga_mode_valid
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The SelectCRTC_Source command will be used to change which CRTC
should be connected to which encoder.
For reference, see the legacy display code:
amdgpu_atombios_encoder_set_crtc_source
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the codebase to use encoder_control()
when the encoder engine is one of the DACs.
The BIOS parser already supports calling the DAC1EncoderControl
function from the VBIOS, but it was not exposed anywhere.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We are going to support analog encoders as well, not just digital,
so we need to make space for them in various arrays.
v2: Fix typo.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The new analog bit will be used with DVI-I connectors.
DVI-I connectors can connect to both digital and analog monitors
and this bit will help distinguish between those.
v2:
Sanitize analog bit based on connector type.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function svm_range_validate_and_map() was freeing `range` when
amdgpu_hmm_range_get_pages() failed. But later, the code still used the
same `range` pointer and freed it again. This could cause a
use-after-free and double-free issue.
The fix sets `range = NULL` right after it is freed and checks for
`range` before using or freeing it again.
v2: Removed duplicate !r check in the condition for clarity.
v3: In amdgpu_hmm_range_get_pages(), when hmm_range_fault() fails, we
kvfree(pfns) but leave the pointer in hmm_range->hmm_pfns still pointing
to freed memory. The caller (or amdgpu_hmm_range_free(range)) may try to
free range->hmm_range.hmm_pfns again, causing a double free, Setting
hmm_range->hmm_pfns = NULL immediately after kvfree(pfns) prevents both
double free. (Philip)
In svm_range_validate_and_map(), When r == 0, it means success → range
is not NULL. When r != 0, it means failure → already made range = NULL.
So checking both (!r && range) is unnecessary because the moment r == 0,
we automatically know range exists and is safe to use. (Philip)
Fixes: 737da5363cc0 ("drm/amdgpu: update the functions to use amdgpu version of hmm")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Philip Yang <Philip.Yang@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Philip Yang<Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
we need to unreserve the bo's too during clean up along
with freeing the memory of context.
Fixes: 7bb02a34c2ba ("drm/amdkfd: add missing return value check for range")
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The CSA and EOP buffers have different alignement requirements.
Hardcode them for now as a bug fix. A proper query will be added in
a subsequent patch.
v2: verify gfx shadow helper callback (Prike)
Fixes: 9e46b8bb0539 ("drm/amdgpu: validate userq buffer virtual address and size")
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move dequeue user queues and destroy user queues from
kfd_process_wq_release to mmu notifier release callback, to ensure no
system memory access from GPU because the process memory is going to
free from CPU after mmu release notifier callback returns.
Destroy queue releases the svm prange queue_refcount, this also removes
fake flase positive warning message "Freeing queue vital buffer" message
if application crash or killed.
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_hmm_range_alloc could fails in case of low
memory condition and hence we should have a check
for the return value.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DC determines the DRM connector type based on the
signal type, which becomes problematic when a connector may
support different signal types, such as DVI-I.
With this patch, it is now determined according to the actual
connector type for DVI-D and DVI-I connectors.
Also set the HPD (hotplug detection) flag for DVI-I connectors
to prevent regressing their digital functionality, which has
been already working.
A subsequent commit will also implement polling for DVI-I.
v2:
Only use connector type for DVI to prevent regressions
for other signal types.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
