summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2015-01-27drm/i915: Force the CS stall for invalidate flushesChris Wilson
commit add284a3a2481e759d6bec35f6444c32c8ddc383 upstream. In order to act as a full command barrier by itself, we need to tell the pipecontrol to actually stall the command streamer while the flush runs. We require the full command barrier before operations like MI_SET_CONTEXT, which currently rely on a prior invalidate flush. References: https://bugs.freedesktop.org/show_bug.cgi?id=83677 Cc: Simon Farnsworth <simon@farnz.org.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-27drm/i915: Invalidate media caches on gen7Chris Wilson
commit 148b83d0815a3778c8949e6a97cb798cbaa0efb3 upstream. In the gen7 pipe control there is an extra bit to flush the media caches, so let's set it during cache invalidation flushes. v2: Rename to MEDIA_STATE_CLEAR to be more inline with spec. Cc: Simon Farnsworth <simon@farnz.org.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-27drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hwAlex Deucher
commit 410cce2a6b82299b46ff316c6384e789ce275ecb upstream. The check was already in place in the dp mode_valid check, but radeon_dp_get_dp_link_clock() never returned the high clock mode_valid was checking for because that function clipped the clock based on the hw capabilities. Add an explicit check in the mode_valid function. bug: https://bugs.freedesktop.org/show_bug.cgi?id=87172 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-27drm/radeon: check the right ring in radeon_evict_flags()Alex Deucher
commit 5e5c21cac1001089007260c48b0c89ebaace0e71 upstream. Check the that ring we are using for copies is functional rather than the GFX ring. On newer asics we use the DMA ring for bo moves. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-27drm/vmwgfx: Fix fence event codeThomas Hellstrom
commit 89669e7a7f96be3ee8d9a22a071d7c0d3b4428fc upstream. The commit "vmwgfx: Rework fence event action" introduced a number of bugs that are fixed with this commit: a) A forgotten return stateemnt. b) An if statement with identical branches. Reported-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16drm/i915: Unlock panel even when LVDS is disabledDaniel Vetter
commit b0616c5306b342ceca07044dbc4f917d95c4f825 upstream. Otherwise we'll have backtraces in assert_panel_unlocked because the BIOS locks the register. In the reporter's case this regression was introduced in commit c31407a3672aaebb4acddf90944a114fa5c8af7b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Oct 18 21:07:01 2012 +0100 drm/i915: Add no-lvds quirk for Supermicro X7SPA-H Reported-by: Alexey Orishko <alexey.orishko@gmail.com> Cc: Alexey Orishko <alexey.orishko@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Francois Tigeot <ftigeot@wolfpond.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16drm/radeon: kernel panic in drm_calc_vbltimestamp_from_scanoutpos with ↵Petr Mladek
3.18.0-rc6 commit f5475cc43c899e33098d4db44b7c5e710f16589d upstream. I was unable too boot 3.18.0-rc6 because of the following kernel panic in drm_calc_vbltimestamp_from_scanoutpos(): [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0x8080). [drm] register mmio base: 0xC8400000 [drm] register mmio size: 65536 radeon 0000:0b:01.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used) radeon 0000:0b:01.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 16bits DDR [TTM] Zone kernel: Available graphics memory: 3829346 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 16M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] PCI GART of 512M enabled (table at 0x0000000037880000). radeon 0000:0b:01.0: WB disabled radeon 0000:0b:01.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff8800bbbfa000 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Loading R100 Microcode radeon 0000:0b:01.0: Direct firmware load for radeon/R100_cp.bin failed with error -2 radeon_cp: Failed to load firmware "radeon/R100_cp.bin" [drm:r100_cp_init] *ERROR* Failed to load firmware! radeon 0000:0b:01.0: failed initializing CP (-2). radeon 0000:0b:01.0: Disabling GPU acceleration [drm] radeon: cp finalized BUG: unable to handle kernel NULL pointer dereference at 000000000000025c IP: [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 PGD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc6-4-default #2649 Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 07/26/2006 task: ffff880234da2010 ti: ffff880234da4000 task.ti: ffff880234da4000 RIP: 0010:[<ffffffff8150423b>] [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP: 0000:ffff880234da7918 EFLAGS: 00010086 RAX: ffffffff81557890 RBX: 0000000000000000 RCX: ffff880234da7a48 RDX: ffff880234da79f4 RSI: 0000000000000000 RDI: ffff880232e15000 RBP: ffff880234da79b8 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000a R11: 0000000000000001 R12: ffff880232dda1c0 R13: ffff880232e1518c R14: 0000000000000292 R15: ffff880232e15000 FS: 0000000000000000(0000) GS:ffff88023fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000025c CR3: 0000000002014000 CR4: 00000000000007e0 Stack: ffff880234da79d8 0000000000000286 ffff880232dcbc00 0000000000002480 ffff880234da7958 0000000000000296 ffff880234da7998 ffffffff8151b51d ffff880234da7a48 0000000032dcbeb0 ffff880232dcbc00 ffff880232dcbc58 Call Trace: [<ffffffff8151b51d>] ? drm_vma_offset_remove+0x1d/0x110 [<ffffffff8152dc98>] radeon_get_vblank_timestamp_kms+0x38/0x60 [<ffffffff8152076a>] ? ttm_bo_release_list+0xba/0x180 [<ffffffff81503751>] drm_get_last_vbltimestamp+0x41/0x70 [<ffffffff81503933>] vblank_disable_and_save+0x73/0x1d0 [<ffffffff81106b2f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff81505245>] drm_vblank_cleanup+0x65/0xa0 [<ffffffff815604fa>] radeon_irq_kms_fini+0x1a/0x70 [<ffffffff8156c07e>] r100_init+0x26e/0x410 [<ffffffff8152ae3e>] radeon_device_init+0x7ae/0xb50 [<ffffffff8152d57f>] radeon_driver_load_kms+0x8f/0x210 [<ffffffff81506965>] drm_dev_register+0xb5/0x110 [<ffffffff8150998f>] drm_get_pci_dev+0x8f/0x200 [<ffffffff815291cd>] radeon_pci_probe+0xad/0xe0 [<ffffffff8141a365>] local_pci_probe+0x45/0xa0 [<ffffffff8141b741>] pci_device_probe+0xd1/0x130 [<ffffffff81633dad>] driver_probe_device+0x12d/0x3e0 [<ffffffff8163413b>] __driver_attach+0x9b/0xa0 [<ffffffff816340a0>] ? __device_attach+0x40/0x40 [<ffffffff81631cd3>] bus_for_each_dev+0x63/0xa0 [<ffffffff8163378e>] driver_attach+0x1e/0x20 [<ffffffff81633390>] bus_add_driver+0x180/0x240 [<ffffffff81634914>] driver_register+0x64/0xf0 [<ffffffff81419cac>] __pci_register_driver+0x4c/0x50 [<ffffffff81509bf5>] drm_pci_init+0xf5/0x120 [<ffffffff821dc871>] ? ttm_init+0x6a/0x6a [<ffffffff821dc908>] radeon_init+0x97/0xb5 [<ffffffff810002fc>] do_one_initcall+0xbc/0x1f0 [<ffffffff810e3278>] ? __wake_up+0x48/0x60 [<ffffffff8218e256>] kernel_init_freeable+0x18a/0x215 [<ffffffff8218d983>] ? initcall_blacklist+0xc0/0xc0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 [<ffffffff818a78fe>] kernel_init+0xe/0xf0 [<ffffffff818c0c3c>] ret_from_fork+0x7c/0xb0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 Code: 45 ac 0f 88 a8 01 00 00 3b b7 d0 01 00 00 49 89 ff 0f 83 99 01 00 00 48 8b 47 20 48 8b 80 88 00 00 00 48 85 c0 0f 84 cd 01 00 00 <41> 8b b1 5c 02 00 00 41 8b 89 58 02 00 00 89 75 98 41 8b b1 60 RIP [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP <ffff880234da7918> CR2: 000000000000025c ---[ end trace ad2c0aadf48e2032 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 It has helped me to add a NULL pointer check that was suggested at http://lists.freedesktop.org/archives/dri-devel/2014-October/070663.html I am not familiar with the code. But the change looks sane and we need something fast at this stage of 3.18 development. Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: Petr Mladek <pmladek@suse.cz> Tested-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-21drm/radeon: add missing crtc unlock when setting up the MCAlex Deucher
commit f0d7bfb9407fccb6499ec01c33afe43512a439a2 upstream. Need to unlock the crtc after updating the blanking state. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14drm/nouveau/bios: memset dcb struct to zero before parsingBen Skeggs
commit 595d373f1e9c9ce0fc946457fdb488e8a58972cd upstream. Fixes type/mask calculation being based on uninitialised data for VGA outputs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14drm/tilcdc: Fix the error path in tilcdc_load()Ezequiel Garcia
commit b478e336b3e75505707a11e78ef8b964ef0a03af upstream. The current error path calls tilcdc_unload() in case of an error to release the resources. However, this is wrong because not all resources have been allocated by the time an error occurs in tilcdc_load(). To fix it, this commit adds proper labels to bail out at the different stages in the load function, and release only the resources actually allocated. Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com> Fixes: 3a49012224ca ("drm/tilcdc: panel: fix leak when unloading the module") Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14drm/ast: Fix HW cursor imageBenjamin Herrenschmidt
commit 1e99cfa8de0f0879091e33cd65fd60418d006ad9 upstream. The translation from the X driver to the KMS one typo'ed a couple of array indices, causing the HW cursor to look weird (blocky with leaking edge colors). This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/radeon: add connector quirk for fujitsu boardAlex Deucher
commit 1952f24d0fa6292d65f886887af87ba8ac79b3ba upstream. Vbios connector table lists non-existent VGA port. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=83184 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/vmwgfx: Fix a potential infinite spin waiting for fifo idleThomas Hellstrom
commit f01ea0c3d9db536c64d47922716d8b3b8f21d850 upstream. The code waiting for fifo idle was incorrect and could possibly spin forever under certain circumstances. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reported-by: Mark Sheldon <markshel@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Reivewed-by: Mark Sheldon <markshel@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/ast: AST2000 cannot be detected correctlyY.C. Chen
commit 83502a5d34386f7c6973bc70e1c423f55f5a2e3a upstream. Type error and cause AST2000 cannot be detected correctly Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by: Egbert Eich <eich@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/i915: Wait for vblank before enabling the TV encoderVille Syrjälä
commit 7a98948f3b536ca9a077e84966ddc0e9f53726df upstream. The vblank waits in intel_tv_detect_type() are timing out for some reason. This is a regression caused removing seemingly useless vblank waits from the modeset seqeuence in: commit 56ef52cad5e37fca89638e4bad598a994ecc3d9f Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Thu May 8 19:23:15 2014 +0300 drm/i915: Kill vblank waits after pipe enable on gmch platforms So it turns out they weren't all entirely useless. Apparently the pipe has to go through one full frame before we enable the TV port. Add a vblank wait to intel_enable_tv() to make sure that happens. Another approach was attempted by placing the vblank wait just after enabling the port. The theory behind that attempt was that we need to let the port stay enabled for one full frame before disabling it again during load detection. But that didn't work, and we definitely must have the vblank wait before enabling the port. Cc: Alan Bartlett <ajb@elrepo.org> Tested-by: Alan Bartlett <ajb@elrepo.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79311 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/i915: Remove bogus __init annotation from DMI callbacksMathias Krause
commit bbe1c2740d3a25aa1dbe5d842d2ff09cddcdde0a upstream. The __init annotations for the DMI callback functions are wrong as this code can be called even after the module has been initialized, e.g. like this: # echo 1 > /sys/bus/pci/devices/0000:00:02.0/remove # modprobe i915 # echo 1 > /sys/bus/pci/rescan The first command will remove the PCI device from the kernel's device list so the second command won't see it right away. But as it registers a PCI driver it'll see it on the third command. If the system happens to match one of the DMI table entries we'll try to call a function in long released memory and generate an Oops, at best. Fix this by removing the bogus annotation. Modpost should have caught that one but it ignores section reference mismatches from the .rodata section. :/ Fixes: 25e341cfc33d ("drm/i915: quirk away broken OpRegion VBT") Fixes: 8ca4013d702d ("CHROMIUM: i915: Add DMI override to skip CRT...") Fixes: 425d244c8670 ("drm/i915: ignore LVDS on intel graphics systems...") Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Jarod Wilson <jarod@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> # Can modpost be fixed? Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/i915: read HEAD register back in init_ring_common() to enforce orderingJiri Kosina
commit ece4a17d237a79f63fbfaf3f724a12b6d500555c upstream. Withtout this, ring initialization fails reliabily during resume with [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head ffffff8804 tail 00000000 start 000e4000 This is not a complete fix, but it is verified to make the ring initialization failures during resume much less likely. We were not able to root-cause this bug (likely HW-specific to Gen4 chips) yet. This is therefore used as a ducttape before problem is fully understood and proper fix created, so that people don't suffer from completely unusable systems in the meantime. The discussion and debugging is happening at https://bugs.freedesktop.org/show_bug.cgi?id=76554 Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/radeon: load the lm63 driver for an lm64 thermal chip.Alex Deucher
commit 5dc355325b648dc9b4cf3bea4d968de46fd59215 upstream. Looks like the lm63 driver supports the lm64 as well. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/ttm: Choose a pool to shrink correctly in ttm_dma_pool_shrink_scan().Tetsuo Handa
commit 46c2df68f03a236b30808bba361f10900c88d95e upstream. We can use "unsigned int" instead of "atomic_t" by updating start_pool variable under _manager->lock. This patch will make it possible to avoid skipping when choosing a pool to shrink in round-robin style, after next patch changes mutex_lock(_manager->lock) to !mutex_trylock(_manager->lork). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/ttm: Fix possible division by 0 in ttm_dma_pool_shrink_scan().Tetsuo Handa
commit 11e504cc705e8ccb06ac93a276e11b5e8fee4d40 upstream. list_empty(&_manager->pools) being false before taking _manager->lock does not guarantee that _manager->npools != 0 after taking _manager->lock because _manager->npools is updated under _manager->lock. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/tilcdc: fix double kfreeGuido Martínez
commit c9a3ad25eddfdb898114a9d73cdb4c3472d9dfca upstream. display_timings_release calls kfree on the display_timings object passed to it. Calling kfree after it is wrong. SLUB debug showed the following warning: ============================================================================= BUG kmalloc-64 (Tainted: G W ): Object already free ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in of_get_display_timings+0x2c/0x214 age=601 cpu=0 pid=884 __slab_alloc.constprop.79+0x2e0/0x33c kmem_cache_alloc+0xac/0xdc of_get_display_timings+0x2c/0x214 panel_probe+0x7c/0x314 [tilcdc] platform_drv_probe+0x18/0x48 [..snip..] INFO: Freed in panel_destroy+0x18/0x3c [tilcdc] age=0 cpu=0 pid=907 __slab_free+0x34/0x330 panel_destroy+0x18/0x3c [tilcdc] tilcdc_unload+0xd0/0x118 [tilcdc] drm_dev_unregister+0x24/0x98 [..snip..] Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/tilcdc: fix release order on exitGuido Martínez
commit eb565a2bbadc6a5030a6dbe58db1aa52453e7edf upstream. Unregister resources in the correct order on tilcdc_drm_fini, which is the reverse order they were registered during tilcdc_drm_init. This also means unregistering the driver before releasing its resources. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/tilcdc: panel: fix leak when unloading the moduleGuido Martínez
commit 3a49012224ca9016658a831a327ff6a7fe5bb4f9 upstream. The driver did not unregister the allocated framebuffer, which caused memory leaks (and memory manager WARNs) when unloading. Also, the framebuffer device under /dev still existed after unloading. Add a call to drm_fbdev_cma_fini when unloading the module to prevent both issues. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/tilcdc: tfp410: fix dangling sysfs connector nodeGuido Martínez
commit 16dcbdef404f4e87dab985494381939fe0a2d456 upstream. Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver, otherwise we will get a warning about a duplicate filename in sysfs. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/tilcdc: slave: fix dangling sysfs connector nodeGuido Martínez
commit daa15b4cd1eee58eb1322062a3320b1dbe5dc96e upstream. Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver as a module. Without this, we would get a warning at re-load time like so: tda998x 0-0070: found TDA19988 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 825 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74() sysfs: cannot create duplicate filename '/class/drm/card0-HDMI-A-1' Modules linked in: [..] CPU: 0 PID: 825 Comm: modprobe Not tainted 3.15.0-rc4-00027-g9dcdef4 #82 [<c0013bb8>] (unwind_backtrace) from [<c0011824>] (show_stack+0x10/0x14) [<c0011824>] (show_stack) from [<c0034e8c>] (warn_slowpath_common+0x68/0x88) [<c0034e8c>] (warn_slowpath_common) from [<c0034edc>] (warn_slowpath_fmt+0x30/0x40) [<c0034edc>] (warn_slowpath_fmt) from [<c01243f4>] (sysfs_warn_dup+0x54/0x74) [<c01243f4>] (sysfs_warn_dup) from [<c0124708>] (sysfs_do_create_link_sd.isra.2+0xb0/0xb8) [<c0124708>] (sysfs_do_create_link_sd.isra.2) from [<c02ae37c>] (device_add+0x338/0x520) [<c02ae37c>] (device_add) from [<c02ae6e8>] (device_create_groups_vargs+0xa0/0xc4) [<c02ae6e8>] (device_create_groups_vargs) from [<c02ae758>] (device_create+0x24/0x2c) [<c02ae758>] (device_create) from [<c029b4ec>] (drm_sysfs_connector_add+0x64/0x204) [<c029b4ec>] (drm_sysfs_connector_add) from [<bf0b1b40>] (slave_modeset_init+0x120/0x1bc [tilcdc]) [<bf0b1b40>] (slave_modeset_init [tilcdc]) from [<bf0b2be8>] (tilcdc_load+0x214/0x4c0 [tilcdc]) [<bf0b2be8>] (tilcdc_load [tilcdc]) from [<c029955c>] (drm_dev_register+0xa4/0x104) [..snip..] ---[ end trace 4df8d614936ebdee ]--- [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -17 Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05drm/tilcdc: panel: fix dangling sysfs connector nodeGuido Martínez
commit e396900e649b0af31161634d87fe37076f46c12b upstream. Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver as a module. Without this, we would get a warning at re-load time like so: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 824 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74() sysfs: cannot create duplicate filename '/class/drm/card0-LVDS-1' Modules linked in: [...] CPU: 0 PID: 824 Comm: modprobe Not tainted 3.15.0-rc4-00027-g6484f96-dirty #81 [<c0013bb8>] (unwind_backtrace) from [<c0011824>] (show_stack+0x10/0x14) [<c0011824>] (show_stack) from [<c0034e8c>] (warn_slowpath_common+0x68/0x88) [<c0034e8c>] (warn_slowpath_common) from [<c0034edc>] (warn_slowpath_fmt+0x30/0x40) [<c0034edc>] (warn_slowpath_fmt) from [<c01243f4>] (sysfs_warn_dup+0x54/0x74) [<c01243f4>] (sysfs_warn_dup) from [<c0124708>] (sysfs_do_create_link_sd.isra.2+0xb0/0xb8) [<c0124708>] (sysfs_do_create_link_sd.isra.2) from [<c02ae37c>] (device_add+0x338/0x520) [<c02ae37c>] (device_add) from [<c02ae6e8>] (device_create_groups_vargs+0xa0/0xc4) [<c02ae6e8>] (device_create_groups_vargs) from [<c02ae758>] (device_create+0x24/0x2c) [<c02ae758>] (device_create) from [<c029b4ec>] (drm_sysfs_connector_add+0x64/0x204) [<c029b4ec>] (drm_sysfs_connector_add) from [<bf0b1fec>] (panel_modeset_init+0xb8/0x134 [tilcdc]) [<bf0b1fec>] (panel_modeset_init [tilcdc]) from [<bf0b2bf0>] (tilcdc_load+0x214/0x4c0 [tilcdc]) [<bf0b2bf0>] (tilcdc_load [tilcdc]) from [<c029955c>] (drm_dev_register+0xa4/0x104) [ .. snip .. ] ---[ end trace b2d09cd9578b0497 ]--- [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -17 Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-05drm: omapdrm: fix compiler errorsRussell King
commit 2d31ca3ad7d5d44c8adc7f253c96ce33f3a2e931 upstream. Regular randconfig nightly testing has detected problems with omapdrm. omapdrm fails to build when the kernel is built to support 64-bit DMA addresses and/or 64-bit physical addresses due to an assumption about the width of these types. Use %pad to print DMA addresses, rather than %x or %Zx (which is even more wrong than %x). Avoid passing a uint32_t pointer into a function which expects dma_addr_t pointer. drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply': drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_plane.o] Error 1 drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_get_paddr': drivers/gpu/drm/omapdrm/omap_gem.c:794:4: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_describe': drivers/gpu/drm/omapdrm/omap_gem.c:991:4: error: format '%Zx' expects argument of type 'size_t', but argument 7 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_init': drivers/gpu/drm/omapdrm/omap_gem.c:1470:4: error: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_gem.o] Error 1 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c: In function 'dmm_txn_append': drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:226:2: error: passing argument 3 of 'alloc_dma' from incompatible pointer type [-Werror] make[5]: *** [drivers/gpu/drm/omapdrm/omap_dmm_tiler.o] Error 1 make[5]: Target `__build' not remade because of errors. make[4]: *** [drivers/gpu/drm/omapdrm] Error 2 Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28drm/radeon: avoid leaking edid dataAlex Deucher
commit 0ac66effe7fcdee55bda6d5d10d3372c95a41920 upstream. In some cases we fetch the edid in the detect() callback in order to determine what sort of monitor is connected. If that happens, don't fetch the edid again in the get_modes() callback or we will leak the edid. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28drm/qxl: return IRQ_NONE if it was not our irqJason Wang
commit fbb60fe35ad579b511de8604b06a30b43846473b upstream. Return IRQ_NONE if it was not our irq. This is necessary for the case when qxl is sharing irq line with a device A in a crash kernel. If qxl is initialized before A and A's irq was raised during this gap, returning IRQ_HANDLED in this case will cause this irq to be raised again after EOI since kernel think it was handled but in fact it was not. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28drm/radeon: set default bl level to something reasonableAlex Deucher
commit 201bb62402e0227375c655446ea04fcd0acf7287 upstream. If the value in the scratch register is 0, set it to the max level. This fixes an issue where the console fb blanking code calls back into the backlight driver on unblank and then sets the backlight level to 0 after the driver has already set the mode and enabled the backlight. bugs: https://bugs.freedesktop.org/show_bug.cgi?id=81382 https://bugs.freedesktop.org/show_bug.cgi?id=70207 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: David Heidelberger <david.heidelberger@ixit.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17drm/radeon: stop poisoning the GART TLBChristian König
commit 0986c1a55ca64b44ee126a2f719a6e9f28cbe0ed upstream. When we set the valid bit on invalid GART entries they are loaded into the TLB when an adjacent entry is loaded. This poisons the TLB with invalid entries which are sometimes not correctly removed on TLB flush. For stable inclusion the patch probably needs to be modified a bit. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17drm/radeon: fix typo in golden register setup on evergreenAlex Deucher
commit 6abafb78f9881b4891baf74ab4e9f090ae45230e upstream. Fixes hangs on driver load on some cards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76998 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09drm/vmwgfx: Fix incorrect write to read-only register v2:Thomas Hellstrom
commit 4e578080ed3262ed2c3985868539bc66218d25c0 upstream. Commit "drm/vmwgfx: correct fb_fix_screeninfo.line_length", while fixing a vmwgfx fbdev bug, also writes the pitch to a supposedly read-only register: SVGA_REG_BYTES_PER_LINE, while it should be (and also in fact is) written to SVGA_REG_PITCHLOCK. This patch is Cc'd stable because of the unknown effects writing to this register might have, particularly on older device versions. v2: Updated log message. Cc: Christopher Friedt <chrisfriedt@gmail.com> Tested-by: Christopher Friedt <chrisfriedt@gmail.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09drm/radeon: don't allow RADEON_GEM_DOMAIN_CPU for command submissionMarek Olšák
commit ec65da385d46f63740c1c9230b891a6dcbd64c71 upstream. It hangs the hardware. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09drm/radeon/atom: fix dithering on certain panelsAlex Deucher
commit 642528355c694f5ed68f6bff9ff520326a249f99 upstream. We need to specify the encoder mode as LVDS for eDP when using the Crtc_Source atom table in order to properly set up the FMT hardware. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73911 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09drm/radeon/dp: fix lane/clock setup for dp 1.2 capable devicesAlex Deucher
commit 3b6d9fd23e015b5397c438fd3cd74147d2c805b6 upstream. Only DCE5+ asics support DP 1.2. Noticed by ArtForz on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09drm/radeon: fix typo in radeon_connector_is_dp12_capable()Alex Deucher
commit af5d36539dfe043f1cf0f8b7334d6bb12cd14e75 upstream. We were checking the ext clock rather than the display clock. Noticed by ArtForz on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09drm/radeon: only apply hdmi bpc pll flags when encoder mode is hdmiAlex Deucher
commit 7d5ab3009a8ca777174f6f469277b3922d56fd4b upstream. May fix display issues with non-HDMI displays. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-11drm/i915: Only copy back the modified fields to userspace from execbufferChris Wilson
commit 9aab8bff7aa3bee567213ad3c1fdfb217bb980a2 upstream. We only want to modifiy a single field in the userspace view of the execbuffer command buffer, so explicitly change that rather than copy everything back again. This serves two purposes: 1. The single fields are much cheaper to copy (constant size so the copy uses special case code) and much smaller than the whole array. 2. We modify the array for internal use that need to be masked from the user. Note: We need this backported since without it the next bugfix will blow up when userspace recycles batchbuffers and relocations. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-11drm/radeon: handle non-VGA class pci devices with ATRMAlex Deucher
commit d8ade3526b2aa0505132c404c05a38b73ea15490 upstream. Newer PX systems have non-VGA pci class dGPUs. Update the ATRM fetch method to handle those cases. bug: https://bugzilla.kernel.org/show_bug.cgi?id=75401 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-11drm/radeon: also try GART for CPU accessed buffersChristian König
commit 544092596e8ac269f70e70961b5e9381909c9b1e upstream. Placing them exclusively into VRAM might not work all the time. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=78297 Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-11drm/gf119-/disp: fix nasty bug which can clobber SOR0's clock setupBen Skeggs
commit 0f1d360b2ee3a2a0f510d3f1bcd3f5ebe5d41265 upstream. Fixes a LVDS bleed issue on Lenovo W530 that can occur under a number of circumstances. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07drm/nouveau/pm/fan: drop the fan lock in fan_update() before reschedulingMartin Peres
commit 61679fe153b2b9ea5b5e2ab93305419e85e99a9d upstream. This should fix a deadlock that has been reported to us where fan_update() would hold the fan lock and try to grab the alarm_program_lock to reschedule an update. On an other CPU, the alarm_program_lock would have been taken before calling fan_update(), leading to a deadlock. We should Cc: <stable@vger.kernel.org> # 3.9+ Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Tested-by: Timothée Ravier <tim@siosm.fr> Tested-by: Boris Fersing (IRC nick fersingb, no public email address) Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07drm/nouveau/acpi: allow non-optimus setups to load vbios from acpiIlia Mirkin
commit a3d0b1218d351c6e6f3cea36abe22236a08cb246 upstream. There appear to be a crop of new hardware where the vbios is not available from PROM/PRAMIN, but there is a valid _ROM method in ACPI. The data read from PCIROM almost invariably contains invalid instructions (still has the x86 opcodes), which makes this a low-risk way to try to obtain a valid vbios image. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76475 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07drm/radeon: check buffer relocation offsetLeo Liu
commit 695daf1a8e731a4b5b89de89a61f32a4d7ad7094 upstream. Signed-off-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07drm/radeon: fix ATPX detection on non-VGA GPUsAlex Deucher
commit e9a4099a59cc598a44006059dd775c25e422b772 upstream. Some newer PX laptops have the pci device class set to DISPLAY_OTHER rather than DISPLAY_VGA. This properly detects ATPX on those laptops. Based on a patch from: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: airlied@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()Egbert Eich
commit 7f1950fbb989e8fc5463b307e062b4529d51c862 upstream. Depending on the SDVO output_flags SDVO may have multiple connectors linking to the same encoder (in intel_connector->encoder->base). Only one of those connectors should be active (ie link to the encoder thru drm_connector->encoder). If intel_connector_break_all_links() is called from intel_sanitize_crtc() we may break the crtc connection of an encoder thru an inactive connector in which case intel_connector_break_all_links() will not be called again for the active connector if this happens to come later in the list due to: if (connector->encoder->base.crtc != &crtc->base) continue; in intel_sanitize_crtc(). This will however leave the drm_connector->encoder linkage for this active connector in place. Subsequently this will cause multiple warnings in intel_connector_check_state() to trigger and the driver will eventually die in drm_encoder_crtc_ok() (because of crtc == NULL). To avoid this remove intel_connector_break_all_links() and move its code to its two calling functions: intel_sanitize_crtc() and intel_sanitize_encoder(). This allows to implement the link breaking more flexibly matching the surrounding code: ie. in intel_sanitize_crtc() we can break the crtc link separatly after the links to the encoders have been broken which avoids above problem. This regression has been introduced in: commit 24929352481f085c5f85d4d4cbc919ddf106d381 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Jul 2 20:28:59 2012 +0200 drm/i915: read out the modeset hw state at load and resume time so goes back to the very beginning of the modeset rework. v2: This patch takes care of the concernes voiced by Chris Wilson and Daniel Vetter that only breaking links if the drm_connector is linked to an encoder may miss some links. v3: move all encoder handling to encoder loop as suggested by Daniel Vetter. Signed-off-by: Egbert Eich <eich@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07gpu: host1x: handle the correct # of syncpt regsStephen Warren
commit 22bbd5d949dc7fdd72a4e78e767fa09d8e54b446 upstream. BIT_WORD() truncates rather than rounds, so the loops in syncpt_thresh_isr() and _host1x_intr_disable_all_syncpt_intrs() use <= rather than < in an attempt to process the correct number of registers when rounding of the conversion of count of bits to count of words is necessary. However, when rounding isn't necessary because the value is already a multiple of the divisor (as is the case for all values of nb_pts the code actually sees), this causes one too many registers to be processed. Solve this by using and explicit DIV_ROUND_UP() call, rather than BIT_WORD(), and comparing with < rather than <=. Fixes: 7ede0b0bf3e2 ("gpu: host1x: Add syncpoint wait and interrupts") Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-By: Terje Bergstrom <tbergstrom@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-30drm/radeon: call drm_edid_to_eld when we update the edidAlex Deucher
commit 16086279353cbfecbb3ead474072dced17b97ddc upstream. This needs to be done to update some of the fields in the connector structure used by the audio code. Noticed by several users on irc. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-30drm/qxl: unset a pointer in sync_obj_unrefMaarten Lankhorst
commit 41ccec352f3c823931a7d9d2a9c7880c14d7415a upstream. This fixes a BUG_ON(bo->sync_obj != NULL); in ttm_bo_release_list. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-27 22:32:15 +0000