summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2013-03-20drm/i915: Increase the RC6p threshold.Stéphane Marchesin
commit 0920a48719f1ceefc909387a64f97563848c7854 upstream. This increases GEN6_RC6p_THRESHOLD from 100000 to 150000. For some reason this avoids the gen6_gt_check_fifodbg.isra warnings and associated GPU lockups, which makes my ivy bridge machine stable. Signed-off-by: Stéphane Marchesin <marcheu@chromium.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20drm/i915: EBUSY status handling added to i915_gem_fault().Dmitry Rogozhkin
commit e79e0fe380847493266fba557217e2773c61bd1b upstream. Subsequent threads returning EBUSY from vm_insert_pfn() was not handled correctly. As a result concurrent access from new threads to mmapped data caused SIGBUS. Note that this fixes i-g-t/tests/gem_threaded_tiled_access. Tested-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14drm/radeon: add primary dac adj quirk for R200 boardAlex Deucher
commit e8fc41377f5037ff7a661ea06adc05f1daec1548 upstream. vbios values are wrong leading to colors that are too bright. Use the default values instead. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm/i915: Set i9xx sdvo clock limits according to specificationsPatrik Jakobsson
commit 4f7dfb6788dd022446847fbbfbe45e13bedb5be2 upstream. The Intel PRM says the M1 and M2 divisors must be in the range of 10-20 and 5-9. Since we do all calculations based on them being register values (which are subtracted by 2) we need to specify them accordingly. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56359 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm/i915: disable shared panel fitter for pipeMika Kuoppala
commit 24a1f16de97c4cf0029d9acd04be06db32208726 upstream. If encoder is switched off by BIOS, but the panel fitter is left on, we never try to turn off the panel fitter and leave it still attached to the pipe - which can cause blurry output elsewhere. Based on work by Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58867 Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Tested-by: Andreas Sturmlechner <andreas.sturmlechner@gmail.com> [danvet: Remove the redundant HAS_PCH_SPLIT check and add a tiny comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm/usb: bind driver to correct deviceDave Airlie
commit 9f23de52b64f7fb801fd76f3dd8651a0dc89187b upstream. While looking at plymouth on udl I noticed that plymouth was trying to use its fb plugin not its drm one, it was trying to drmOpen a driver called usb not udl, noticed that we actually had out driver pointing at the wrong device. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm: Use C8 instead of RGB332 when determining the format from depth/bppVille Syrjälä
commit d84f031bd230fdf9c3b7734940c859bf28b90219 upstream. Support for real RGB332 is a rarity, most hardware only really support C8. So use C8 instead of RGB332 when determining the format based on depth/bpp. This fixes 8bpp fbcon on i915, since i915 will only accept C8 and not RGB332. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59572 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Tested-by: mlsemon35@gmail.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm: Fill depth/bits_per_pixel for C8 formatVille Syrjälä
commit c51a6bc5f6d328926a9a4a1247c5030faf190a80 upstream. Set depth/bits_per_pixel to 8 for C8 format. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm: don't add inferred modes for monitors that don't support themPaulo Zanoni
commit 196e077dc165a307efbd9e7569f81bbdbcf18f65 upstream. If bit 0 of the features byte (0x18) is set to 0, then, according to the EDID spec, "the display is non-continuous frequency (multi-mode) and is only specified to accept the video timing formats that are listed in Base EDID and certain Extension Blocks". For more information, please see the EDID spec, check the notes of the table that explains the "Feature Support" byte (18h) and also the notes on the tables of the section that explains "Display Range Limits & Additional Timing Description Definition (tag #FDh)". Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45729 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm/udl: disable fb_defio by defaultDave Airlie
commit 677d23b70bf949f75746c80cbae92c233c6b5e2a upstream. There seems to be a bad interaction between gem/shmem and defio on top, I get list corruption on the page lru in the shmem code. Turn it off for now until we get some more digging done. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm/udl: make usage as a console saferDave Airlie
commit bcb39af4486be07e896fc374a2336bad3104ae0a upstream. Okay you don't really want to use udl devices as your console, but if you are unlucky enough to do so, you run into a lot of schedule while atomic due to printk being called from all sorts of funky places. So check if we are in an atomic context, and queue the damage for later, the next printk should cause it to appear. This isn't ideal, but it is simple, and seems to work okay in my testing here. (dirty area idea came from xenfb) fixes a bunch of sleeping while atomic issues running fbcon on udl devices. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-28drm/radeon/dce6: fix display powergatingAlex Deucher
commit 0e3d50bfcbd338254795a700dcff429a96cba1a6 upstream. Only enable it when we disable the display rather than at DPMS time since enabling it requires a full modeset to restore the display state. Fixes blank screens in certain cases. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-14efi: Make 'efi_enabled' a function to query EFI facilitiesMatt Fleming
commit 83e68189745ad931c2afd45d8ee3303929233e7f upstream. Originally 'efi_enabled' indicated whether a kernel was booted from EFI firmware. Over time its semantics have changed, and it now indicates whether or not we are booted on an EFI machine with bit-native firmware, e.g. 64-bit kernel with 64-bit firmware. The immediate motivation for this patch is the bug report at, https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 which details how running a platform driver on an EFI machine that is designed to run under BIOS can cause the machine to become bricked. Also, the following report, https://bugzilla.kernel.org/show_bug.cgi?id=47121 details how running said driver can also cause Machine Check Exceptions. Drivers need a new means of detecting whether they're running on an EFI machine, as sadly the expression, if (!efi_enabled) hasn't been a sufficient condition for quite some time. Users actually want to query 'efi_enabled' for different reasons - what they really want access to is the list of available EFI facilities. For instance, the x86 reboot code needs to know whether it can invoke the ResetSystem() function provided by the EFI runtime services, while the ACPI OSL code wants to know whether the EFI config tables were mapped successfully. There are also checks in some of the platform driver code to simply see if they're running on an EFI machine (which would make it a bad idea to do BIOS-y things). This patch is a prereq for the samsung-laptop fix patch. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Olof Johansson <olof@lixom.net> Cc: Peter Jones <pjones@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Steve Langasek <steve.langasek@canonical.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Konrad Rzeszutek Wilk <konrad@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-11drm/radeon: Calling object_unrefer() when creating fb failureliu chuansheng
commit f2d68cf4daa4de97d400d94836b907e35228e54f upstream. When kzalloc() failed in radeon_user_framebuffer_create(), need to call object_unreference() to match the object_reference(). Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Signed-off-by: xueminsu <xuemin.su@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-11drm/radeon: prevent crash in the ring space allocationAlex Deucher
commit fd5d93a0015ce1a7db881382022b2fcdfdc61760 upstream. If the requested number of DWs on the ring is larger than the size of the ring itself, return an error. In testing with large VM updates, we've seen crashes when we try and allocate more space on the ring than the total size of the ring without checking. This prevents the crash but for large VM updates or bo moves of very large buffers, we will need to break the transaction down into multiple batches. I have patches to use IBs for the next kernel. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-11drm/radeon: fix MC blackout on evergreen+Christopher Staite
commit bb588820ef421c6098dca1fec29c3b347f1c8c19 upstream. Force the crtc mem requests on/off immediately rather than waiting for the double buffered updates to kick in. Seems we miss the update in certain conditions. Also handle the DCE6 case. Signed-off-by: Christopher Staite <chris@yourdreamnet.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-11drm/radeon: add quirk for RV100 boardAlex Deucher
commit 9200ee4941a6e5d1ec5df88982243686882dff3f upstream. vbios says external TMDS while the board is actually internal TMDS. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=60037 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-11drm/radeon: add WAIT_UNTIL to the non-VM safe regs list for cayman/TNAlex Deucher
commit 674a16f2b4724880d07389abbb95abf320b924aa upstream. Newer versions of mesa emit this. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-11drm/radeon/evergreen+: wait for the MC to settle after MC blackoutAlex Deucher
commit ed39fadd6df01095378e499fac3674883f16b853 upstream. Some chips seem to need a little delay after blacking out the MC before the requests actually stop. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=56139 https://bugs.freedesktop.org/show_bug.cgi?id=57567 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-03radeon_display: Use pointer return error codesxueminsu
commit b2f4b03f8a378cd626d2ea67d19e7470c050a098 upstream. drm_mode_addfb() expects fb_create return error code instead of NULL. Signed-off-by: xueminsu <xuemin.su@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-03drm/radeon: fix cursor corruption on DCE6 and newerJerome Glisse
commit e521a29014794d139cca46396d1af8faf1295a26 upstream. Aruba and newer gpu does not need the avivo cursor work around, quite the opposite this work around lead to corruption. agd5f: check DCE6 rather than ARUBA since the issue is DCE version specific rather than family specific. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-27drm/i915: Implement WaDisableHiZPlanesWhenMSAAEnabledDaniel Vetter
commit 4283908ef7f11a72c3b80dd4cf026f1a86429f82 upstream. Quoting from Bspec, 3D_CHICKEN1, bit 10 This bit needs to be set always to "1", Project: DevSNB " Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Abdallah Chatila <abdallah.chatila@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-27drm/i915: Invalidate the relocation presumed_offsets along the slow pathChris Wilson
commit 262b6d363fcff16359c93bd58c297f961f6e6273 upstream. In the slow path, we are forced to copy the relocations prior to acquiring the struct mutex in order to handle pagefaults. We forgo copying the new offsets back into the relocation entries in order to prevent a recursive locking bug should we trigger a pagefault whilst holding the mutex for the reservations of the execbuffer. Therefore, we need to reset the presumed_offsets just in case the objects are rebound back into their old locations after relocating for this exexbuffer - if that were to happen we would assume the relocations were valid and leave the actual pointers to the kernels dangling, instant hang. Fixes regression from commit bcf50e2775bbc3101932d8e4ab8c7902aa4163b4 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sun Nov 21 22:07:12 2010 +0000 drm/i915: Handle pagefaults in execbuffer user relocations Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@fwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-17Revert "drm/i915: no lvds quirk for Zotac ZDBOX SD ID12/ID13"Daniel Vetter
commit 48e858340dae43189a4e55647f6eac736766f828 upstream. This reverts commit 9756fe38d10b2bf90c81dc4d2f17d5632e135364. The bogus lvds output is actually a lvds->hdmi bridge, which we don't really support. But unconditionally disabling it breaks some existing setups. Reported-by: John Tapsell <johnflux@gmail.com> References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/17237 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: Flush the pending flips on the CRTC before modificationChris Wilson
commit 5bb61643f6a70d48de9cfe91ad0fee0d618b6816 upstream. This was meant to be the purpose of the intel_crtc_wait_for_pending_flips() function which is called whilst preparing the CRTC for a modeset or before disabling. However, as Ville Syrjala pointed out, we set the pending flip notification on the old framebuffer that is no longer attached to the CRTC by the time we come to flush the pending operations. Instead, we can simply wait on the pending unpin work to be finished on this CRTC, knowning that the hardware has therefore finished modifying the registers, before proceeding with our direct access. Fixes i-g-t/flip_test on non-pch platforms. pch platforms simply schedule the flip immediately when the pipe is disabled, leading to other funny issues. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Added i-g-t note and cc: stable] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: call drm_handle_vblank before finish_page_flipDaniel Vetter
commit 74d44445afb9f50126eba052adeb89827cee88f3 upstream. ... since finish_page_flip needs the vblank timestamp generated in drm_handle_vblank. Somehow all the gmch platforms get it right, but all the pch platform irq handlers get is wrong. Hooray for copy& pasting! Currently this gets papered over by a gross hack in finish_page_flip. A second patch will remove that. Note that without this, the new timestamp sanity checks in flip_test occasionally get tripped up, hence the cc: stable tag. Reviewed-by: mario.kleiner@tuebingen.mpg.de Tested-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: no loop over pipes in ivybridge_irq_handler(), so make a similar change to that in ironlake_irq_handler()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: Fix GT_MODE default valueBen Widawsky
commit f8f2ac9a76b0f80a6763ca316116a7bab8486997 upstream. I can't even find how I figured this might be needed anymore. But sure enough, the value I'm reading back on platforms doesn't match what the docs recommends. It seemed to fix Chris' GT1 in limited testing as well. Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: open-code _MASKED_BIT_{ENABLE,DISABLE}] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: prevent possible pin leak on error pathEugeni Dodonov
commit ab3951eb74e7c33a2f5b7b64d72e82f1eea61571 upstream. We should not hit this under any sane conditions, but still, this does not looks right. Reported-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wlison <chris@chris-wilson.co.uk> Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: Reduce a pin-leak BUG into a WARNChris Wilson
commit 7e81a42e341a4f15d76624b7c02ffb21b085b56f upstream. Pin-leaks persist and we get the perennial bug reports of machine lockups to the BUG_ON(pin_count==MAX). If we instead loudly report that the object cannot be pinned at that time it should prevent the driver from locking up, and hopefully restore a semblance of working whilst still leaving us a OOPS to debug. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: only enable sdvo hotplug irq if neededJani Nikula
commit fcbc50da7753b210b4442ca9abc4efbd4e481f6e upstream. Avoid constant wakeups caused by noisy irq lines when we don't even care about the irq. This should be particularly useful for i945g/gm where the hotplug has been disabled: commit 768b107e4b3be0acf6f58e914afe4f337c00932b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri May 4 11:29:56 2012 +0200 drm/i915: disable sdvo hotplug on i945g/gm v2: While at it, remove the bogus hotplug_active read, and do not mask hotplug_active[0] before checking whether the irq is needed, per discussion with Daniel on IRC. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=38442 Tested-by: Dominik Köppl <dominik@devwork.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/radeon: fix ordering in pll picking on dce4+Alex Deucher
commit ecd67955fd4c8e66e4df312098989d5fa7da624c upstream. No functional change, but re-order the cases so they evaluate properly due to the way the DCE macros work. Noticed by kallisti5 on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: SDVO hotplug have different interrupt status bits for i915/i965/g4xChris Wilson
commit 084b612ecf8e59973576b2f644e6949609c79375 upstream. Note that gen3 is the only platform where we've got the bit definitions right, hence the workaround of disabling sdvo hotplug support on i945g/gm is not due to misdiagnosis of broken hotplug irq handling ... Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: add some blurb about sdvo hotplug fail on i945g/gm I've wondered about while reviewing.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: - Adjust context - Handle all three cases in i915_driver_irq_postinstall() as there are not separate functions for gen3 and gen4+ - Carry on using IS_SDVOB() in intel_sdvo_init()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: add some barriers when changing DIPsPaulo Zanoni
commit 9d9740f099f2eaf309c4c9cbc0d732507140db28 upstream. On IVB and older, we basically have two registers: the control and the data register. We write a few consecutitve times to the control register, and we need these writes to arrive exactly in the specified order. Also, when we're changing the data register, we need to guarantee that anything written to the control register already arrived (since changing the control register can change where the data register points to). Also, we need to make sure all the writes to the data register happen exactly in the specified order, and we also *can't* read the data register during this process, since reading and/or writing it will change the place it points to. So invoke the "better safe than sorry" rule and just be careful and put barriers everywhere :) On HSW we still have a control register that we write many times, but we have many data registers. Demanded-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: - There are only two write_infoframe functions to be modified - The other VIDEO_DIP_CTL writes are in entirely different functions] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/radeon: fix up pll selection on DCE5/6Alex Deucher
commit 26fe45a0a76f165425f332a5aaa298f149f9db22 upstream. Selecting ATOM_PPLL_INVALID should be equivalent as the DCPLL or PPLL0 are already programmed for the DISPCLK, but the preferred method is to always specify the PLL selected. SetPixelClock will check the parameters and skip the programming if the PLL is already set up. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: don't pwrite tiled objects through the gttDaniel Vetter
commit c07496fa61f4c5cb2addd1c57f6b22fcaeea2eeb upstream. ... we will botch up the bit17 swizzling. Furthermore tiled pwrite is a (now) unused slowpath, so no one really cares. This fixes the last swizzling issues I have with i-g-t on my bit17 swizzling i915G. No regression, it's been broken since the dawn of gem, but it's nice for regression tracking when really _all_ i-g-t tests work. Actually this is not true, Chris Wilson noticed while reviewing this patch that the commit commit d9e86c0ee60f323e890484628f351bf50fa9a15d Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Nov 10 16:40:20 2010 +0000 drm/i915: Pipelined fencing [infrastructure] contained a functional change that broke things. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [jcristau: adjust context for 3.4] Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: Wait for all pending operations to the fb before disabling the pipeChris Wilson
commit 0f91128d88bbb8b0a8e7bb93df2c40680871d45a upstream. During modeset we have to disable the pipe to reconfigure its timings and maybe its size. Userspace may have queued up command buffers that depend upon the pipe running in a certain configuration and so the commands may become confused across the modeset. At the moment, we use a less than satisfactory kick-scanline-waits should the GPU hang during the modeset. It should be more reliable to wait for the pending operations to complete first, even though we still have a window for userspace to submit a broken command buffer during the modeset. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: Add wait_for in init_ring_commonSean Paul
commit f01db988ef6f6c70a6cc36ee71e4a98a68901229 upstream. I have seen a number of "blt ring initialization failed" messages where the ctl or start registers are not the correct value. Upon further inspection, if the code just waited a little bit, it would read the correct value. Adding the wait_for to these reads should eliminate the issue. Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: Check VBIOS value for determining LVDS dual channel mode, tooTakashi Iwai
commit b03543857fd75876b96e10d4320b775e95041bb7 upstream. Currently i915 driver checks [PCH_]LVDS register bits to decide whether to set up the dual-link or the single-link mode. This relies implicitly on that BIOS initializes the register properly at boot. However, BIOS doesn't initialize it always. When the machine is booted with the closed lid, BIOS skips the LVDS reg initialization. This ends up in blank output on a machine with a dual-link LVDS when you open the lid after the boot. This patch adds a workaround for that problem by checking the initial LVDS register value in VBT. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=37742 Tested-By: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: hold forcewake around ring hw initDaniel Vetter
commit b7884eb45ec98c0d34c7f49005ae9d4b4b4e38f6 upstream. Empirical evidence suggests that we need to: On at least one ivb machine when running the hangman i-g-t test, the rings don't properly initialize properly - the RING_START registers seems to be stuck at all zeros. Holding forcewake around this register init sequences makes chip reset reliable again. Note that this is not the first such issue: commit f01db988ef6f6c70a6cc36ee71e4a98a68901229 Author: Sean Paul <seanpaul@chromium.org> Date: Fri Mar 16 12:43:22 2012 -0400 drm/i915: Add wait_for in init_ring_common added delay loops to make RING_START and RING_CTL initialization reliable on the blt ring at boot-up. So I guess it won't hurt if we do this unconditionally for all force_wake needing gpus. To avoid copy&pasting of the HAS_FORCE_WAKE check I've added a new intel_info bit for that. v2: Fixup missing commas in static struct and properly handling the error case in init_ring_common, both noticed by Jani Nikula. Reported-and-tested-by: Yang Guang <guang.a.yang@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50522 Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: - drop changes to Haswell device information - NEEDS_FORCE_WAKE didn't refer to Valley View anyway] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> [jcristau: further context adjustments for 3.4] Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: move NEEDS_FORCE_WAKE to i915_drv.cJesse Barnes
commit b7d84096d3c45f4e397e913da4ce24ec9a32022e upstream. It's only used by the main read/write functions, so we can keep it with them. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: fix up ivb plane 3 pageflipsDaniel Vetter
commit cb05d8dedefa3066bf5d74ef88c6ca6cf4bd1c87 upstream. Or at least plug another gapping hole. Apparrently hw desingers only moved the bit field, but did not bother ot re-enumerate the planes when adding support for a 3rd pipe. Discovered by i-g-t/flip_test. This may or may not fix the reference bugzilla, because that one smells like we have still larger fish to fry. v2: Fixup the impossible case to catch programming errors, noticed by Chris Wilson. References: https://bugs.freedesktop.org/show_bug.cgi?id=50069 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: Unpin the flip target if we fail to queue the flipChris Wilson
commit 83d4092b0381e5dd6f312b2ec57121dcf0fcbade upstream. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/edid/quirks: ViewSonic VA2026wAdam Jackson
commit bc42aabc6a01b92b0f961d65671564e0e1cd7592 upstream. Entirely new class of fail for this one. The detailed timings are for normal CVT but the monitor really wanted CVT-R. Bugzilla: http://bugzilla.redhat/com/516471 Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: disable cpt phase pointer fdi rx workaroundDaniel Vetter
commit 539526b4137bc0e7a8806c38c8522f226814a0e6 upstream. We've originally added this in commit 291427f5fdadec6e4be2924172e83588880e1539 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Jul 29 12:42:37 2011 -0700 drm/i915: apply phase pointer override on SNB+ too and then copy-pasted it over to ivb/ppt. The w/a was originally added for ilk/ibx in commit 5b2adf897146edeac6a1e438fb67b5a53dbbdf34 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu Oct 7 16:01:15 2010 -0700 drm/i915: add Ironlake clock gating workaround for FDI link training and fixed up a bit in commit 6f06ce184c765fd8d50669a8d12fdd566c920859 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Tue Jan 4 15:09:38 2011 -0800 drm/i915: set phase sync pointer override enable before setting phase sync pointer It turns out that this w/a isn't actually required on cpt/ppt and positively harmful on ivb/ppt when using fdi B/C links - it results in a black screen occasionally, with seemingfully everything working as it should. The only failure indication I've found in the hw is that eventually (but not right after the modeset completes) a pipe underrun is signalled. Big thanks to Arthur Runyan for all the ideas for registers to check and changes to test, otherwise I couldn't ever have tracked this down! Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: "Runyan, Arthur J" <arthur.j.runyan@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/nouveau: fix blank LVDS screen regression on pre-nv50 cardsMarcin Slusarz
commit 92441b2263866c27ef48137be5aa6c8c692652fc upstream. Commit 2a44e499 ("drm/nouveau/disp: introduce proper init/fini, separate from create/destroy") started to call display init routines on pre-nv50 hardware on module load. But LVDS init code sets driver state in a way which prevents modesetting code from operating properly. nv04_display_init calls nv04_dfp_restore, which sets encoder->last_dpms to NV_DPMS_CLEARED. drm_crtc_helper_set_mode nv04_dfp_prepare nv04_lvds_dpms(DRM_MODE_DPMS_OFF) nv04_lvds_dpms checks last_dpms mode (which is NV_DPMS_CLEARED) and wrongly assumes it's a "powersaving mode", the new one (DRM_MODE_DPMS_OFF) is too, so it skips calling some crucial lvds scripts. Reported-by: Chris Paulson-Ellis <chris@edesix.com> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17radeon/kms: force rn50 chip to always report connected on analog outputJerome Glisse
commit 51861d4eebc2ddc25c77084343d060fa79f6e291 upstream. Those rn50 chip are often connected to console remoting hw and load detection often fails with those. Just don't try to load detect and report connect. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17udldrmfb: udl_get_edid: drop unneeded i--Hans de Goede
commit 7b4cf994e4c6ba48872bb25253cc393b7fb74c82 upstream. This is a left-over from when udl_get_edid returned the amount of bytes successfully read, which it no longer does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17udldrmfb: udl_get_edid: usb_control_msg buffer must not be on the stackHans de Goede
commit 242187b362555849e8c971dfbbfd55f8bd9fa717 upstream. The buffer passed to usb_control_msg may end up in scatter-gather list, and may thus not be on the stack. Having it on the stack usually works on x86, but not on other archs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17udldrmfb: Fix EDID not working with monitors with EDID extension blocksHans de Goede
commit c930812fe5ebe725760422c9c351d1f6fde1502d upstream. udldrmfb only reads the main EDID block, and if that advertises extensions the drm_edid code expects them to be present, and starts reading beyond the buffer udldrmfb passes it. Although it may be possible to read more EDID info with the udl we simpy don't know how, and even if trial and error gets it working on one device, that is no guarantee it will work on other revisions. So this patch does a simple fix in the form of patching the EDID info to report 0 extension blocks, this fixes udldrmfb only doing 1024x768 on monitors with EDID extension blocks. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: make the panel fitter work on pipes B and C on IVBPaulo Zanoni
commit 13888d78c664a1f61d7b09d282f5916993827a40 upstream. I actually found this problem on Haswell, but then discovered Ivy Bridge also has it by reading the spec. I don't have the hardware to test this. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-02-14 00:00:02 +0000