summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2012-09-14drm/vmwgfx: add MODULE_DEVICE_TABLE so vmwgfx loads at bootDave Airlie
commit c4903429a92be60e6fe59868924a65eca4cd1a38 upstream. This will cause udev to load vmwgfx instead of waiting for X to do it. Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14gma500: Consider CRTC initially active.Forest Bond
commit 4a68a74ba04e7ccf798d45988f4f2d2131fb5063 upstream. [this one ideally should make 3.6 - it fixes the very annoying mode setting bug] This causes the pipe to be forced off prior to initial mode set, which roughly mirrors the behavior of the i915 driver. It fixes initial mode setting on my Intel DN2800MT (Cedarview) board. Without it, mode setting triggers an out-of-range error from the monitor for most modes, but only on initial configuration (i.e. they can be configured successfully from userspace after that). Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14Revert "drm/radeon: fix bo creation retry path"Alex Deucher
commit 676bc2e1e4f9072f7a640d5b7c99ffdf9709a6e7 upstream. This reverts commit d1c7871ddb1f588b8eb35affd9ee1a3d5e11cd0c. ttm_bo_init() destroys the BO on failure. So this patch makes the retry path work with freed memory. This ends up causing kernel panics when this path is hit. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14drm: stop vmgfx driver explosionAlan Cox
commit f5869a8308f77e3dfdc2e3640842b285aa788ff8 upstream. If you do a page flip with no flags set then event is NULL. If event is NULL then the vmw_gfx driver likes to go digging into NULL and extracts NULL->base.file_priv. On a modern kernel with NULL mapping protection it's just another oops, without it there are some "intriguing" possibilities. What it should do is an open question but that for the driver owners to sort out. Signed-off-by: Alan Cox <alan@linux.intel.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25drm/radeon/kms: allow "invalid" DB formats as a means to disable DBMarek Olšák
commit 0f457e488c79922dfd646f94ed058764f7ba758c upstream. Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25drm/radeon: fix bank tiling parameters on evergreenAlex Deucher
commit c8d15edc17d836686d1f071e564800e1a2724fa6 upstream. Handle the 16 bank case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25drm/radeon: fix bank tiling parameters on SIChristian König
commit dca571a6a4edda1f61ba7ecb47431a22245490a3 upstream. The sixteen bank case wasn't handled here, leading to GPU crashes because of userspace miscalculation. Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25drm/radeon: fix bank tiling parameters on caymanAlex Deucher
commit 5b23c9045a8b61352986270b2d109edf5085e113 upstream. Handle the 16 bank case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25drm/i915: make rc6 in sysfs functions conditionalHunt Xu
commit 5ab3633d6907018b0b830a720e877c3884d679c3 upstream. Commit 0136db586c028f71e7cc21cc183064ff0d5919c8 merges rc6 information into the power group. However, when compiled with CONFIG_PM not set, modprobing i915 would taint since power_group_name is defined as NULL. This patch makes these rc6 in sysfs functions conditional upon the definition of the CONFIG_PM macro to avoid the above-mentioned problem. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45181 Tested-by: Kris Karas <bugs-a12@moonlit-rail.com> Signed-off-by: Hunt Xu <mhuntxu@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25drm/radeon: do not reenable crtc after moving vram start addressJerome Glisse
commit 81ee8fb6b52ec69eeed37fe7943446af1dccecc5 upstream. It seems we can not update the crtc scanout address. After disabling crtc, update to base address do not take effect after crtc being reenable leading to at least frame being scanout from the old crtc base address. Disabling crtc display request lead to same behavior. So after changing the vram address if we don't keep crtc disabled we will have the GPU trying to read some random system memory address with some iommu this will broke the crtc engine and will lead to broken display and iommu error message. So to avoid this, disable crtc. For flicker less boot we will need to avoid moving the vram start address. This patch should also fix : https://bugs.freedesktop.org/show_bug.cgi?id=42373 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25drm/radeon: properly handle crtc powergatingAlex Deucher
commit 6c0ae2ab85fc4a95cae82047a7db1f688a7737ab upstream. Need to make sure the crtc is gated on before modesetting. Explicitly gate the crtc on in prepare() and set a flag so that the dpms functions don't gate it off during mode set. Noticed by sylware on IRC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25drm/i915: reorder edp disabling to fix ivb MacBook AirDaniel Vetter
commit 35a38556d900b9cb5dfa2529c93944b847f8a8a4 upstream. eDP is tons of fun. It turns out that at least the new MacBook Air 5,1 model absolutely doesn't like the new force vdd dance we've introduced in commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel But that patch also tried to fix some neat edp sequence issue with the force_vdd timings. Closer inspection reveals that we've raised force_vdd only to do the aux channel communication dp_sink_dpms. If we move the edp_panel_off below that, we don't need any force_vdd for the disable sequence, which makes the Air happy. Unfortunately the reporter of the original bug that the above commit fixed is travelling, so we can't test whether this regresses things. But my theory is that since we don't check for any power-off -> force_vdd-on delays in edp_panel_vdd_on, this was the actual root-cause of this failure. With that force_vdd dance completely eliminated, I'm hopeful the original bug stays fixed, too. For reference the old bug, which hopefully doesn't get broken by this: https://bugzilla.kernel.org/show_bug.cgi?id=43163 In any case, regression fixers win over plain bugfixes, so this needs to go in asap. v2: The crucial pieces seems to be to clear the force_vdd flag uncoditionally, too, in edp_panel_off. Looks like this is left behind by the firmware somehow. v3: The Apple firmware seems to switch off the panel on it's own, hence we still need to keep force_vdd on, but properly clear it when switching the panel off. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671 Tested-by: Roberto Romer <sildurin@gmail.com> Tested-by: Daniel Wagner <wagi@monom.org> Tested-by: Keith Packard <keithp@keithp.com> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25drm/i915: ignore eDP bpc settings from vbtDaniel Vetter
commit 4344b813f105a19f793f1fd93ad775b784648b95 upstream. This has originally been introduced to not oversubscribe the dp links in commit 885a5fb5b120a5c7e0b3baad7b0feb5a89f76c18 Author: Zhenyu Wang <zhenyuw@linux.intel.com> Date: Tue Jan 12 05:38:31 2010 +0800 drm/i915: fix pixel color depth setting on eDP Since then we've fixed up the dp link bandwidth calculation code and should now automatically fall back to 6bpc dithering. So this is unnecessary. Furthermore it seems to break the new MacbookPro with retina display, hence let's just rip this out. Reported-by: Benoit Gschwind <gschwind@gnu-log.net> Cc: Benoit Gschwind <gschwind@gnu-log.net> Cc: Francois Rigaut <frigaut@gmail.com> Tested-by: Benoit Gschwind <gschwind@gnu-log.net> Tested-by: Bernhard Froemel <froemel at vmars tuwien.ac.at> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -- Testing feedback highgly welcome, and thanks for Benoit for finding out that the bpc computations are busted. -Daniel
2012-08-25drm/i915: correctly order the ring init sequenceDaniel Vetter
commit 0d8957c8a90bbb5d34fab9a304459448a5131e06 upstream. We may only start to set up the new register values after having confirmed that the ring is truely off. Otherwise the hw might lose the newly written register values. This is caught later on in the init sequence, when we check whether the register writes have stuck. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50522 Tested-by: Yang Guang <guang.a.yang@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinateChristoph Bumiller
commit af5e7d84b0ec45b2b614b0d6e3657cbdceaa21f9 upstream. Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25drm/i915: prefer wide & slow to fast & narrow in DP configsJesse Barnes
commit 2514bc510d0c3aadcc5204056bb440fa36845147 upstream. High frequency link configurations have the potential to cause trouble with long and/or cheap cables, so prefer slow and wide configurations instead. This patch has the potential to cause trouble for eDP configurations that lie about available lanes, so if we run into that we can make it conditional on eDP. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45801 Tested-by: peter@colberg.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25drm/mgag200: fix G200ER pll picking algorithmDave Airlie
commit 9830605d4c070b16ec5c24a75503877cc7698409 upstream. The original code was misported from the X driver, a) an int went to unsigned int, breaking the downward counting testm code b) the port did the vco/computed clock bits completely wrong. This fixes an infinite loop on modprobe on some Dell servers with the G200ER chipset variant. Found in internal testing. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-25nouveau: fixup scanout enable in nvc0_pmMaarten Lankhorst
commit 44b9f44e111c1e4a50bff66a642cc7c5cb59af4e upstream. Fixes screen being black after changing performance level. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09nouveau: Fix alignment requirements on src and dst addressesMaarten Lankhorst
commit ce806a30470bcd846d148bf39d46de3ad7748228 upstream. Linear copy works by adding the offset to the buffer address, which may end up not being 16-byte aligned. Some tests I've written for prime_pcopy show that the engine allows this correctly, so the restriction on lowest 4 bits of address can be lifted safely. The comments added were by envyas, I think because I used a newer version. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09drm/nouveau: init vblank requests listMarcin Slusarz
commit 715855457e6bc93e148caf8cb3b5dcabbf605b0d upstream. Fixes kernel panic when vblank interrupt triggers before first sync to vblank request. (Besides init, remove some relevant leftovers from vblank rework) Reported-by: Ortwin Glück <odi@odi.ch> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09drm/radeon: fix dpms on/off on trinity/aruba v2Jerome Glisse
commit fcedac670c3da0d17aaa5db1708694971e8024a9 upstream. The external encoder need to be setup again before enabling the transmiter. This seems to be only needed on some trinity/aruba to fix dpms on. v2: Add comment, only setup again on dce6 ie aruba or newer. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09drm/radeon: on hotplug force link training to happen (v2)Jerome Glisse
commit ca2ccde5e2f24a792caa4cca919fc5c6f65d1887 upstream. To have DP behave like VGA/DVI we need to retrain the link on hotplug. For this to happen we need to force link training to happen by setting connector dpms to off before asking it turning it on again. v2: agd5f - drop the dp_get_link_status() change in atombios_dp.c for now. We still need the dpms OFF change. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09drm/radeon: fix hotplug of DP to DVI|HDMI passive adapters (v2)Jerome Glisse
commit 266dcba541a1ef7e5d82d9e67c67fde2910636e8 upstream. No need to retrain the link for passive adapters. v2: agd5f - no passive DP to VGA adapters, update comments - assign radeon_connector_atom_dig after we are sure we have a digital connector as analog connectors have different private data. - get new sink type before checking for retrain. No need to check if it's no longer a DP connection. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09drm/radeon: fix non revealent error messageJerome Glisse
commit 8d1c702aa0b2c4b22b0742b72a1149d91690674b upstream. We want to print link status query failed only if it's an unexepected fail. If we query to see if we need link training it might be because there is nothing connected and thus link status query have the right to fail in that case. To avoid printing failure when it's expected, move the failure message to proper place. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09drm/radeon: Try harder to avoid HW cursor ending on a multiple of 128 columns.Michel Dänzer
commit f60ec4c7df043df81e62891ac45383d012afe0da upstream. This could previously fail if either of the enabled displays was using a horizontal resolution that is a multiple of 128, and only the leftmost column of the cursor was (supposed to be) visible at the right edge of that display. The solution is to move the cursor one pixel to the left in that case. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33183 Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09drm/radeon: fix bo creation retry pathJerome Glisse
commit d1c7871ddb1f588b8eb35affd9ee1a3d5e11cd0c upstream. Retry label was at wrong place in function leading to memory leak. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09drm/radeon: fix fence related segfault in CSChristian König
commit 93bf888c5c730605e3470f5d2381f296eda88d79 upstream. Don't return success if scheduling the IB fails, otherwise we end up with an oops in ttm_eu_fence_buffer_objects. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16gma500,cdv: Fix the brightness baseAlan Cox
Some desktop environments carefully save and restore the brightness settings from the previous boot. Unfortunately they don't all check to see if the range has changed. The end result is that they restore a brightness of 100/lots not 100/100. As the old driver and the non-free GMA36xx driver both use 0-100 we thus need to go back doing the same thing to avoid users getting a mysterious black screen after boot. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-16gma500: move the ASLE enableAlan Cox
Otherwise we end up getting the masks wrong, can get events before we are doing power control and other ungood things. Again this is a regression fix where the ordering of handling was disturbed by other work, and the user experience on some boxes is a blank screen. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-16gma500: Fix lid related crashAlan Cox
We now set up the lid timer before we set up the backlight. On some devices that causes a crash as we do a backlight change before or during the setup. As this fixes a crash on boot regression on some setups it ought to go in ASAP, especially as all the user gets is a blank screen. Signed-off-by: Alan Cox <alan@linux.intel.com> Tested-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-03drm/i915: kick any firmware framebuffers before claiming the gttDaniel Vetter
Especially vesafb likes to map everything as uc- (yikes), and if that mapping hangs around still while we try to map the gtt as wc the kernel will downgrade our request to uc-, resulting in abyssal performance. Unfortunately we can't do this as early as readon does (i.e. as the first thing we do when initializing the hw) because our fb/mmio space region moves around on a per-gen basis. So I've had to move it below the gtt initialization, but that seems to work, too. The important thing is that we do this before we set up the gtt wc mapping. Now an altogether different question is why people compile their kernels with vesafb enabled, but I guess making things just work isn't bad per se ... v2: - s/radeondrmfb/inteldrmfb/ - fix up error handling v3: Kill #ifdef X86, this is Intel after all. Noticed by Ben Widawsky. v4: Jani Nikula complained about the pointless bool primary initialization. v5: Don't oops if we can't allocate, noticed by Chris Wilson. v6: Resolve conflicts with agp rework and fixup whitespace. This is commit e188719a2891f01b3100d in drm-next. Backport to 3.5 -fixes queue requested by Dave Airlie - due to grub using vesa on fedora their initrd seems to load vesafb before loading the real kms driver. So tons more people actually experience a dead-slow gpu. Hence also the Cc: stable. Cc: stable@vger.kernel.org Reported-and-tested-by: "Kilarski, Bernard R" <bernard.r.kilarski@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-03drm: edid: Don't add inferred modes with higher resolutionTakashi Iwai
When a monitor EDID doesn't give the preferred bit, driver assumes that the mode with the higest resolution and rate is the preferred mode. Meanwhile the recent changes for allowing more modes in the GFT/CVT ranges give actually more modes, and some modes may be over the native size. Thus such a mode would be picked up as the preferred mode although it's no native resolution. For avoiding such a problem, this patch limits the addition of inferred modes by checking not to be greater than other modes. Also, it checks the duplicated mode entry at the same time. Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-03drm/radeon: fix rare segfaultJerome Glisse
In gem idle/busy ioctl the radeon object was derefenced after drm_gem_object_unreference_unlocked which in case the object have been destroyed lead to use of a possibly free pointer with possibly wrong data. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-29drm/radeon: fix VM page table setup on SIAlex Deucher
Cayman and trinity allow for variable sized VM page tables, but SI requires that all page tables be the same size. The current code assumes variablely sized VM page tables so SI may end up with part of each page table overlapping with other memory which could end up being interpreted by the VM hw as garbage. Change the code to better accomodate SI. Allocate enough space for at least 2 full page tables and always set last_pfn to max_pfn on SI so each VM is backed by a full page table. This limits us to only 2 VMs active at any given time on SI. This will be rectified and the code can be reunified once we move to two level page tables. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-27Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: "Two tiny patches and one revert: - Kill a bogus error message introduced in 3.4, further Bspec reading indicates that this is how the hw is supposed to work. - Reorder one backlight register restore, fixing broken backlight on some machines after resume. - Revert a hack from Jesse for ivb backlight control - it breaks the backlight controls on my shiny new ivb laptop." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: Revert "drm/i915: allow PCH PWM override on IVB" drm/i915: Fix eDP blank screen after S3 resume on HP desktops drm/i915: rip out the PM_IIR WARN
2012-06-27Revert "drm/i915: allow PCH PWM override on IVB"Daniel Vetter
This reverts commit f82cfb6bcda164ef3a66b8c3fc549b1f9bdd09ad. This breaks the backlight controls on my IVB asus zenbook with an eDP panel. I guess the right fix would be to read this bit and use either the pch or the cpu register to frob the backlight values. But that is stuff for -next. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-27drm/nouveau: add license header to prime.Dave Airlie
Just forgot this when I posted it, and yes I'm the only person to have changed the file since. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-26drm/nouveau/fbcon: using nv_two_heads is not a good ideaBen Skeggs
nv_two_heads() was never meant to be used outside of pre-nv50 code. The code checks for >= NV_10 for 2 CRTCs, then downgrades a few specific chipsets to 1 CRTC based on (pci_device & 0x0ff0). The breakage example seen is on GTX 560Ti, with a pciid of 0x1200, which gets detected as an NV20 (0x020x) with 1 CRTC by nv_two_heads(), causing memory corruption because there's actually 2 CRTCs.. This switches fbcon to use the CRTC count directly from the mode_config structure, which will also fix the same issue on Kepler boards which have 4 CRTCs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-25drm/udl: Make sure to get correct endian keys from vendor descriptorDave Airlie
This is a port of commit b49f184b640dcfab7ede394cf2a1ff4fe3d154f5 Author: Ben Collins <bcollins@ubuntu.com> from udlfb to udl kms driver. The driver was not using le16_to_cpu when reading keys from the vendor descriptor, causing incorrect parsing. Mainly, sku_pixel_limit was not being parsed on big-endian systems. This would result in a blank screen on big-endian CPUs where the DL chips's max mode was smaller than the monitor's native mode. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-23drm/i915: Fix eDP blank screen after S3 resume on HP desktopsTakashi Iwai
This patch fixes the problem on some HP desktop machines with eDP which give blank screens after S3 resume. It turned out that BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2. Otherwise it doesn't take effect on these SNB machines. Tested with 3.5-rc3 kernel. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49233 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-23drm/i915: rip out the PM_IIR WARNDaniel Vetter
After banging my head against this for the past few months, I still don't see how this could possible race under the premise that once an irq bit is masked in PM_IMR and reset in PM_IIR it won't show up again until we unmask it in PM_IMR. Still, we have reports of this being seen in the wild. Now Bspec has this little bit of lovely language in the PMIIR register: Public SNB Docs, Vol3Part2, 2.5.14 "PMIIR": "For each bit, the IIR can store a second pending interrupt if two or more of the same interrupt conditions occur before the first condition is cleared. Upon clearing the interrupt, the IIR bit will momentarily go low, then return high to indicate there is another interrupt pending." Now if we presume that PMIMR only prevent new interrupts from being queued, we could easily end up masking an interrupt and clearing it, but the 2nd pending interrupt setting the bit in PMIIR right away again. Which leads, the next time the irq handler runs, to hitting the WARN. Also, no bad side effects of this have ever been reported. And we've tracked down our issues with the gpu turbo getting stuck to bogus interrupt generation limits in th RPLIMIT register. So let's just rip out this WARN as bogus and call it a day. The only shallow thing here is that this 2-deep irq queue in the hw makes you wonder how racy the windows irq handler is ... Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42907 Cc: stable@vger.kernel.org Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-21drm/edid: don't return stack garbage from supports_rbDaniel Vetter
We need to initialize this to false, because the is_rb callback only ever sets it to true. Noticed while reading through the code. Cc: stable@vger.kernel.org Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-20drm/radeon: SI tiling fixes for displayAlex Deucher
- Use the correct union for getting the tiling info - Properly init the PIPE_CONFIG field for SI Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: cache the EDID for eDP panels Revert "drm/i915/dp: Use auxch precharge value of 5 everywhere" drm/i915: eDP aux needs vdd drm/i915: don't enumerate HDMID if an eDP panel is already active on the port
2012-06-16drm/i915: cache the EDID for eDP panelsJesse Barnes
They aren't going anywhere, and probing on DDC can cause the panel to blank briefly, so read them up front and cache them for later queries. v2: fix potential NULL derefs in intel_dp_get_edid_modes and intel_dp_get_edid (Jani) copy full EDID length, including extension blocks (Takashi) free EDID on teardown (Takashi) v3: malloc a new EDID buffer that's big enough for the memcpy (Chris) v4: change handling of NULL EDIDs, just preserve the NULL behavior across detects and mode list fetches rather than trying to re-fetch the EDID (Chris) v5: be glad that Chris is around to remind me to hit C-x C-s before committing. References: https://bugs.freedesktop.org/show_bug.cgi?id=46856 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-16Revert "drm/i915/dp: Use auxch precharge value of 5 everywhere"Daniel Vetter
This reverts commit 092945e11c5b84f66dd08f0b87fb729715d377bc. This commit prevents a DP screen from properly training the link. Oddly enough it works, once the machine has been warm-booted with an older kernel. According to DP docs this _should_ have been the right precharge time. Also, the commit that originally introduces this was just general snb DP enabling and didn't mention any specific reason for this special value. Whatever, trust the reporter that this makes things worse and let's just revert it. v2: Less spelling fail. Cc: Adam Jackson <ajax@redhat.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reported-by: "Wouter M. Koolen" <W.M.Koolen-Wijkstra@cwi.nl> Buglink: https://lkml.org/lkml/2012/6/14/301 Cc: stable@vger.kernel.org (only for 3.4) Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-16drm/i915: eDP aux needs vddDaniel Vetter
The new oui probe has been missing these. This issue has been introduce in commit 0d198328538276c4459ef5de081e68ae60e6c4c2 Author: Adam Jackson <ajax@redhat.com> Date: Mon May 14 16:05:47 2012 -0400 drm/i915/dp: Probe branch/sink OUIs v2: Do the eDP vdd dance of simply not probing the OUI on eDP panels as suggested by Chris Wilson. v3: Fix up the error path fail - I suck. Cc: Adam Jackson <ajax@redhat.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50808 Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Bugreport: http://permalink.gmane.org/gmane.comp.video.dri.devel/69695 Tested-by: Yang Guang <guang.a.yang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-16drm/i915: don't enumerate HDMID if an eDP panel is already active on the portJesse Barnes
This prevents the HDMI detect functions from poking at an eDP connected panel, which can lead to trouble. [danvet: Note that we have some other reports of DP vs. HDMI fighting, but the general case is a much bigger fish to fry.] References: https://bugs.freedesktop.org/show_bug.cgi?id=42278 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-16drm/radeon: add support for STRMOUT_BASE_UPDATE on 7xxAlex Deucher
Required for streamout. Bump drm minor. Marek v2: fix pkt->count check Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16drm/radeon: add some additional 6xx/7xx/EG register initAlex Deucher
- SMX_SAR_CTL0 needs to be programmed correctly to prevent problems with memory exports in certain cases. - VC_ENHANCE needs to be initialized on 6xx/7xx. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-09 04:53:43 +0000