summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2017-09-09drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()John Stultz
commit 6d5104c5a6b56385426e15047050584794bb6254 upstream. In chasing down a previous issue with EDID probing from calling drm_helper_hpd_irq_event() from irq context, Laurent noticed that the DRM documentation suggests that drm_kms_helper_hotplug_event() should be used instead. Thus this patch replaces drm_helper_hpd_irq_event() with drm_kms_helper_hotplug_event(), which requires we update the connector.status entry and only call _hotplug_event() when the status changes. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq ↵John Stultz
context commit 518cb7057a59b9441336d2e88a396d52b6ab0cce upstream. I was recently seeing issues with EDID probing, where the logic to wait for the EDID read bit to be set by the IRQ wasn't happening and the code would time out and fail. Digging deeper, I found this was due to the fact that IRQs were disabled as we were running in IRQ context from the HPD signal. Thus this patch changes the logic to handle the HPD signal via a work_struct so we can be out of irq context. With this patch, the EDID probing on hotplug does not time out. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09drm/nouveau/pci/msi: disable MSI on big-endian platforms by defaultIlia Mirkin
commit bc60c90f472b6e762ea96ef384072145adc8d4af upstream. It appears that MSI does not work on either G5 PPC nor on a E5500-based platform, where other hardware is reported to work fine with MSI. Both tests were conducted with NV4x hardware, so perhaps other (or even this) hardware can be made to work. It's still possible to force-enable with config=NvMSI=1 on load. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-07drm/ttm: Fix accounting error when fail to get pages for poolXiangliang.Yu
commit 9afae2719273fa1d406829bf3498f82dbdba71c7 upstream. When fail to get needed page for pool, need to put allocated pages into pool. But current code has a miscalculation of allocated pages, correct it. Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30drm: rcar-du: Fix H/V sync signal polarity configurationKoji Matsuoka
commit fd1adef3bff0663c5ac31b45bc4a05fafd43d19b upstream. The VSL and HSL bits in the DSMR register set the corresponding horizontal and vertical sync signal polarity to active high. The code got it the wrong way around, fix it. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30drm: rcar-du: Fix display timing controller parameterKoji Matsuoka
commit 9cdced8a39c04cf798ddb2a27cb5952f7d39f633 upstream. There is a bug in the setting of the DES (Display Enable Signal) register. This current setting occurs 1 dot left shift. The DES register should be set minus one value about the specifying value with H/W specification. This patch corrects it. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30drm: rcar-du: Fix crash in encoder failure error pathLaurent Pinchart
commit 05ee29e94acf0d4b3998c3f93374952de8f90176 upstream. When an encoder fails to initialize the driver prints an error message to the kernel log. The message contains the name of the encoder's DT node, which is NULL for internal encoders. Use the of_node_full_name() macro to avoid dereferencing a NULL pointer, print the output number to add more context to the error, and make sure we still own a reference to the encoder's DT node by delaying the of_node_put() call. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30drm/atomic: If the atomic check fails, return its value firstMaarten Lankhorst
commit a0ffc51e20e90e0c1c2491de2b4b03f48b6caaba upstream. The last part of drm_atomic_check_only is testing whether we need to fail with -EINVAL when modeset is not allowed, but forgets to return the value when atomic_check() fails first. This results in -EDEADLK being replaced by -EINVAL, and the sanity check in drm_modeset_drop_locks kicks in: [ 308.531734] ------------[ cut here ]------------ [ 308.531791] WARNING: CPU: 0 PID: 1886 at drivers/gpu/drm/drm_modeset_lock.c:217 drm_modeset_drop_locks+0x33/0xc0 [drm] [ 308.531828] Modules linked in: [ 308.532050] CPU: 0 PID: 1886 Comm: kms_atomic Tainted: G U W 4.13.0-rc5-patser+ #5225 [ 308.532082] Hardware name: NUC5i7RYB, BIOS RYBDWi35.86A.0246.2015.0309.1355 03/09/2015 [ 308.532124] task: ffff8800cd9dae00 task.stack: ffff8800ca3b8000 [ 308.532168] RIP: 0010:drm_modeset_drop_locks+0x33/0xc0 [drm] [ 308.532189] RSP: 0018:ffff8800ca3bf980 EFLAGS: 00010282 [ 308.532211] RAX: dffffc0000000000 RBX: ffff8800ca3bfaf8 RCX: 0000000013a171e6 [ 308.532235] RDX: 1ffff10019477f69 RSI: ffffffffa8ba4fa0 RDI: ffff8800ca3bfb48 [ 308.532258] RBP: ffff8800ca3bf998 R08: 0000000000000000 R09: 0000000000000003 [ 308.532281] R10: 0000000079dbe066 R11: 00000000f760b34b R12: 0000000000000001 [ 308.532304] R13: dffffc0000000000 R14: 00000000ffffffea R15: ffff880096889680 [ 308.532328] FS: 00007ff00959cec0(0000) GS:ffff8800d4e00000(0000) knlGS:0000000000000000 [ 308.532359] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 308.532380] CR2: 0000000000000008 CR3: 00000000ca2e3000 CR4: 00000000003406f0 [ 308.532402] Call Trace: [ 308.532440] drm_mode_atomic_ioctl+0x19fa/0x1c00 [drm] [ 308.532488] ? drm_atomic_set_property+0x1220/0x1220 [drm] [ 308.532565] ? avc_has_extended_perms+0xc39/0xff0 [ 308.532593] ? lock_downgrade+0x610/0x610 [ 308.532640] ? drm_atomic_set_property+0x1220/0x1220 [drm] [ 308.532680] drm_ioctl_kernel+0x154/0x1a0 [drm] [ 308.532755] drm_ioctl+0x624/0x8f0 [drm] [ 308.532858] ? drm_atomic_set_property+0x1220/0x1220 [drm] [ 308.532976] ? drm_getunique+0x210/0x210 [drm] [ 308.533061] do_vfs_ioctl+0xd92/0xe40 [ 308.533121] ? ioctl_preallocate+0x1b0/0x1b0 [ 308.533160] ? selinux_capable+0x20/0x20 [ 308.533191] ? do_fcntl+0x1b1/0xbf0 [ 308.533219] ? kasan_slab_free+0xa2/0xb0 [ 308.533249] ? f_getown+0x4b/0xa0 [ 308.533278] ? putname+0xcf/0xe0 [ 308.533309] ? security_file_ioctl+0x57/0x90 [ 308.533342] SyS_ioctl+0x4e/0x80 [ 308.533374] entry_SYSCALL_64_fastpath+0x18/0xad [ 308.533405] RIP: 0033:0x7ff00779e4d7 [ 308.533431] RSP: 002b:00007fff66a043d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 308.533481] RAX: ffffffffffffffda RBX: 000000e7c7ca5910 RCX: 00007ff00779e4d7 [ 308.533560] RDX: 00007fff66a04430 RSI: 00000000c03864bc RDI: 0000000000000003 [ 308.533608] RBP: 00007ff007a5fb00 R08: 000000e7c7ca4620 R09: 000000e7c7ca5e60 [ 308.533647] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000070 [ 308.533685] R13: 0000000000000000 R14: 0000000000000000 R15: 000000e7c7ca5930 [ 308.533770] Code: ff df 55 48 89 e5 41 55 41 54 53 48 89 fb 48 83 c7 50 48 89 fa 48 c1 ea 03 80 3c 02 00 74 05 e8 94 d4 16 e7 48 83 7b 50 00 74 02 <0f> ff 4c 8d 6b 58 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 [ 308.534086] ---[ end trace 77f11e53b1df44ad ]--- Solve this by adding the missing return. This is also a bugfix because we could end up rejecting updates with -EINVAL because of a early -EDEADLK, while if atomic_check ran to completion it might have downgraded the modeset to a fastset. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Testcase: kms_atomic Link: https://patchwork.freedesktop.org/patch/msgid/20170815095706.23624-1-maarten.lankhorst@linux.intel.com Fixes: d34f20d6e2f2 ("drm: Atomic modeset ioctl") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30drm: Release driver tracking before making the object available againChris Wilson
commit fe4600a548f2763dec91b3b27a1245c370ceee2a upstream. This is the same bug as we fixed in commit f6cd7daecff5 ("drm: Release driver references to handle before making it available again"), but now the exposure is via the PRIME lookup tables. If we remove the object/handle from the PRIME lut, then a new request for the same object/fd will generate a new handle, thus for a short window that object is known to userspace by two different handles. Fix this by releasing the driver tracking before PRIME. Fixes: 0ff926c7d4f0 ("drm/prime: add exported buffers to current fprivs imported buffer list (v2)") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170819120558.6465-1-chris@chris-wilson.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-16drm/i915: Fix out-of-bounds array access in bdw_load_gamma_lutMaarten Lankhorst
commit 5279fc7724ae3a82c9cfe5b09c1fb07ff0e41056 upstream. bdw_load_gamma_lut is writing beyond the array to the maximum value. The intend of the function is to clamp values > 1 to 1, so write the intended color to the max register. This fixes the following KASAN warning: [ 197.020857] [IGT] kms_pipe_color: executing [ 197.063434] [IGT] kms_pipe_color: starting subtest ctm-0-25-pipe0 [ 197.078989] ================================================================== [ 197.079127] BUG: KASAN: slab-out-of-bounds in bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915] [ 197.079188] Read of size 2 at addr ffff8800d38db150 by task kms_pipe_color/1839 [ 197.079208] CPU: 2 PID: 1839 Comm: kms_pipe_color Tainted: G U 4.13.0-rc1-patser+ #5211 [ 197.079215] Hardware name: NUC5i7RYB, BIOS RYBDWi35.86A.0246.2015.0309.1355 03/09/2015 [ 197.079220] Call Trace: [ 197.079230] dump_stack+0x68/0x9e [ 197.079239] print_address_description+0x6f/0x250 [ 197.079251] kasan_report+0x216/0x370 [ 197.079374] ? bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915] [ 197.079451] ? gen8_write16+0x4e0/0x4e0 [i915] [ 197.079460] __asan_report_load2_noabort+0x14/0x20 [ 197.079535] bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915] [ 197.079612] broadwell_load_luts+0x1df/0x550 [i915] [ 197.079690] intel_color_load_luts+0x7b/0x80 [i915] [ 197.079764] intel_begin_crtc_commit+0x138/0x760 [i915] [ 197.079783] drm_atomic_helper_commit_planes_on_crtc+0x1a3/0x820 [drm_kms_helper] [ 197.079859] ? intel_pre_plane_update+0x571/0x580 [i915] [ 197.079937] intel_update_crtc+0x238/0x330 [i915] [ 197.080016] intel_update_crtcs+0x10f/0x210 [i915] [ 197.080092] intel_atomic_commit_tail+0x1552/0x3340 [i915] [ 197.080101] ? _raw_spin_unlock+0x3c/0x40 [ 197.080110] ? __queue_work+0xb40/0xbf0 [ 197.080188] ? skl_update_crtcs+0xc00/0xc00 [i915] [ 197.080195] ? trace_hardirqs_on+0xd/0x10 [ 197.080269] ? intel_atomic_commit_ready+0x128/0x13c [i915] [ 197.080329] ? __i915_sw_fence_complete+0x5b8/0x6d0 [i915] [ 197.080336] ? debug_object_activate+0x39e/0x580 [ 197.080397] ? i915_sw_fence_await+0x30/0x30 [i915] [ 197.080409] ? __might_sleep+0x15b/0x180 [ 197.080483] intel_atomic_commit+0x944/0xa70 [i915] [ 197.080490] ? refcount_dec_and_test+0x11/0x20 [ 197.080567] ? intel_atomic_commit_tail+0x3340/0x3340 [i915] [ 197.080597] ? drm_atomic_crtc_set_property+0x303/0x580 [drm] [ 197.080674] ? intel_atomic_commit_tail+0x3340/0x3340 [i915] [ 197.080704] drm_atomic_commit+0xd7/0xe0 [drm] [ 197.080722] drm_atomic_helper_crtc_set_property+0xec/0x130 [drm_kms_helper] [ 197.080749] drm_mode_crtc_set_obj_prop+0x7d/0xb0 [drm] [ 197.080775] drm_mode_obj_set_property_ioctl+0x50b/0x5d0 [drm] [ 197.080783] ? __might_fault+0x104/0x180 [ 197.080809] ? drm_mode_obj_find_prop_id+0x160/0x160 [drm] [ 197.080838] ? drm_mode_obj_find_prop_id+0x160/0x160 [drm] [ 197.080861] drm_ioctl_kernel+0x154/0x1a0 [drm] [ 197.080885] drm_ioctl+0x624/0x8f0 [drm] [ 197.080910] ? drm_mode_obj_find_prop_id+0x160/0x160 [drm] [ 197.080934] ? drm_getunique+0x210/0x210 [drm] [ 197.080943] ? __handle_mm_fault+0x1bd0/0x1ce0 [ 197.080949] ? lock_downgrade+0x610/0x610 [ 197.080957] ? __lru_cache_add+0x15a/0x180 [ 197.080967] do_vfs_ioctl+0xd92/0xe40 [ 197.080975] ? ioctl_preallocate+0x1b0/0x1b0 [ 197.080982] ? selinux_capable+0x20/0x20 [ 197.080991] ? __do_page_fault+0x7b7/0x9a0 [ 197.080997] ? lock_downgrade+0x5bb/0x610 [ 197.081007] ? security_file_ioctl+0x57/0x90 [ 197.081016] SyS_ioctl+0x4e/0x80 [ 197.081024] entry_SYSCALL_64_fastpath+0x18/0xad [ 197.081030] RIP: 0033:0x7f61f287a987 [ 197.081035] RSP: 002b:00007fff7d44d188 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 197.081043] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f61f287a987 [ 197.081048] RDX: 00007fff7d44d1c0 RSI: 00000000c01864ba RDI: 0000000000000003 [ 197.081053] RBP: 00007f61f2b3eb00 R08: 0000000000000059 R09: 0000000000000000 [ 197.081058] R10: 0000002ea5c4a290 R11: 0000000000000246 R12: 00007f61f2b3eb58 [ 197.081063] R13: 0000000000001010 R14: 00007f61f2b3eb58 R15: 0000000000002702 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101659 Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by: Martin Peres <martin.peres@linux.intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Fixes: 82cf435b3134 ("drm/i915: Implement color management on bdw/skl/bxt/kbl") Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Kiran S Kumar <kiran.s.kumar@intel.com> Cc: Kausal Malladi <kausalmalladi@gmail.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20170724091431.24251-1-maarten.lankhorst@linux.intel.com Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> (cherry picked from commit 09a92bc8773b4314e02b478e003fe5936ce85adb) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-16drm/etnaviv: Fix off-by-one error in reloc checkingWladimir J. van der Laan
commit d6f756e09f01ea7a0efbbcef269a1e384a35d824 upstream. A relocation pointing to the last four bytes of a buffer can legitimately happen in the case of small vertex buffers. Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-11drm/virtio: fix framebuffer sparse warningGerd Hoffmann
[ Upstream commit 71d3f6ef7f5af38dea2975ec5715c88bae92e92d ] virtio uses normal ram as backing storage for the framebuffer, so we should assign the address to new screen_buffer (added by commit 17a7b0b4d9749f80d365d7baff5dec2f54b0e992) instead of screen_base. Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-11drm/amdgpu: Fix undue fallthroughs in golden registers initializationJean Delvare
commit 5694785cf09bf0e7bd8e5f62361ea34fa162a4a0 upstream. As I was staring at the si_init_golden_registers code, I noticed that the Pitcairn initialization silently falls through the Cape Verde initialization, and the Oland initialization falls through the Hainan initialization. However there is no comment stating that this is intentional, and the radeon driver doesn't have any such fallthrough, so I suspect this is not supposed to happen. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10") Cc: Ken Wang <Qingqing.Wang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Marek Olšák" <maraeo@gmail.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are setJordan Crouse
[ Upstream commit a6cb3b864b21b7345f824a4faa12b723c8aaf099 ] For every submission buffer object one of MSM_SUBMIT_BO_WRITE and MSM_SUBMIT_BO_READ must be set (and nothing else). If we allowed zero then the buffer object would never get queued to be unreferenced. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm/msm: Put back the vaddr in submit_reloc()Jordan Crouse
[ Upstream commit 6490abc4bc35fa4f3bdb9c7e49096943c50e29ea ] The error cases in submit_reloc() need to put back the virtual address of the bo before failling. Add a single failure path for the function. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm/msm: Ensure that the hardware write pointer is validJordan Crouse
[ Upstream commit 88b333b0ed790f9433ff542b163bf972953b74d3 ] Currently the value written to CP_RB_WPTR is calculated on the fly as (rb->next - rb->start). But as the code is designed rb->next is wrapped before writing the commands so if a series of commands happened to fit perfectly in the ringbuffer, rb->next would end up being equal to rb->size / 4 and thus result in an out of bounds address to CP_RB_WPTR. The easiest way to fix this is to mask WPTR when writing it to the hardware; it makes the hardware happy and the rest of the ringbuffer math appears to work and there isn't any point in upsetting anything. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> [squash in is_power_of_2() check] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm: rcar-du: Simplify and fix probe error handlingLaurent Pinchart
commit 4f7b0d263833928e947e172eff2d2997179c5cb9 upstream. It isn't safe to call drm_dev_unregister() without first initializing mode setting with drm_mode_config_init(). This leads to a crash if either IO memory can't be remapped or vblank initialization fails. Fix this by reordering the initialization sequence. Move vblank initialization after the drm_mode_config_init() call, and move IO remapping before drm_dev_alloc() to avoid the need to perform clean up in case of failure. While at it remove the explicit drm_vblank_cleanup() call from rcar_du_remove() as the drm_dev_unregister() function already cleans up vblank. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: thongsyho <thong.ho.px@rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm/nouveau/bar/gf100: fix access to upper half of BAR2Ben Skeggs
commit 38bcb208f60924a031b9f809f7cd252ea4a94e5f upstream. Bit 30 being set causes the upper half of BAR2 to stay in physical mode, mapped over the end of VRAM, even when the rest of the BAR has been set to virtual mode. We inherited our initial value from RM, but I'm not aware of any reason we need to keep it that way. This fixes severe GPU hang/lockup issues revealed by Wayland on F26. Shout-out to NVIDIA for the quick response with the potential cause! Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm/nouveau/disp/nv50-: bump max chans to 21Ilia Mirkin
commit a90e049cacd965dade4dae7263b4d3fd550e78b6 upstream. GP102's cursors go from chan 17..20. Increase the array size to hold their data properly. Fixes: e50fcff15f ("drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices") Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06drm/vmwgfx: Fix gcc-7.1.1 warningSinclair Yeh
commit fcfffdd8f98ac305285dca568b5065ef86be6458 upstream. The current code does not look correct, and the reason for it is probably lost. Since this now generates a compiler warning, fix it to what makes sense. Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27drm/mst: Avoid processing partially received up/down message transactionsImre Deak
commit 636c4c3e762b62aa93632c645ca65879285b16e3 upstream. Currently we may process up/down message transactions containing uninitialized data. This can happen if there was an error during the reception of any message in the transaction, but we happened to receive the last message correctly with the end-of-message flag set. To avoid this abort the reception of the transaction when the first error is detected, rejecting any messages until a message with the start-of-message flag is received (which will start a new transaction). This is also what the DP 1.4 spec 2.11.8.2 calls for in this case. In addtion this also prevents receiving bogus transactions without the first message with the the start-of-message flag set. v2: - unchanged v3: - git add the part that actually skips messages after an error in drm_dp_sideband_msg_build() Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude <lyude@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170719134632.13366-1-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req()Imre Deak
commit 7f8b3987da54cb4d41ad2545cd4d7958b9a36bdf upstream. In case of an unknown broadcast message is sent mstb will remain unset, so check for this. Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude <lyude@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170719114330.26540-3-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27drm/mst: Fix error handling during MST sideband message receptionImre Deak
commit 448421b5e93b9177c5698f0cf6f5e72d2995eeca upstream. Handle any error due to partial reads, timeouts etc. to avoid parsing uninitialized data subsequently. Also bail out if the parsing itself fails. Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude <lyude@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170719114330.26540-2-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27drm/ttm: Fix use-after-free in ttm_bo_clean_mmJohn Brooks
commit 8046e1955465e3f24e9154d0f2a2e0a8e3f8dccf upstream. We unref the man->move fence in ttm_bo_clean_mm() and then call ttm_bo_force_list_clean() which waits on it, except the refcount is now zero so a warning is generated (or worse): [149492.279301] refcount_t: increment on 0; use-after-free. [149492.279309] ------------[ cut here ]------------ [149492.279315] WARNING: CPU: 3 PID: 18726 at lib/refcount.c:150 refcount_inc+0x2b/0x30 [149492.279315] Modules linked in: vhost_net vhost tun x86_pkg_temp_thermal crc32_pclmul ghash_clmulni_intel efivarfs amdgpu( -) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm [149492.279326] CPU: 3 PID: 18726 Comm: rmmod Not tainted 4.12.0-rc5-drm-next-4.13-ttmpatch+ #1 [149492.279326] Hardware name: Gigabyte Technology Co., Ltd. Z97X-UD3H-BK/Z97X-UD3H-BK-CF, BIOS F6 06/17/2014 [149492.279327] task: ffff8804ddfedcc0 task.stack: ffffc90008d20000 [149492.279329] RIP: 0010:refcount_inc+0x2b/0x30 [149492.279330] RSP: 0018:ffffc90008d23c30 EFLAGS: 00010286 [149492.279331] RAX: 000000000000002b RBX: 0000000000000170 RCX: 0000000000000000 [149492.279331] RDX: 0000000000000000 RSI: ffff88051ecccbe8 RDI: ffff88051ecccbe8 [149492.279332] RBP: ffffc90008d23c30 R08: 0000000000000001 R09: 00000000000003ee [149492.279333] R10: ffffc90008d23bb0 R11: 00000000000003ee R12: ffff88043aaac960 [149492.279333] R13: ffff8805005e28a8 R14: 0000000000000002 R15: ffff88050115e178 [149492.279334] FS: 00007fc540168700(0000) GS:ffff88051ecc0000(0000) knlGS:0000000000000000 [149492.279335] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [149492.279336] CR2: 00007fc3e8654140 CR3: 000000027ba77000 CR4: 00000000001426e0 [149492.279337] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [149492.279337] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [149492.279338] Call Trace: [149492.279345] ttm_bo_force_list_clean+0xb9/0x110 [ttm] [149492.279348] ttm_bo_clean_mm+0x7a/0xe0 [ttm] [149492.279375] amdgpu_ttm_fini+0xc9/0x1f0 [amdgpu] [149492.279392] amdgpu_bo_fini+0x12/0x40 [amdgpu] [149492.279415] gmc_v7_0_sw_fini+0x32/0x40 [amdgpu] [149492.279430] amdgpu_fini+0x2c9/0x490 [amdgpu] [149492.279445] amdgpu_device_fini+0x58/0x1b0 [amdgpu] [149492.279461] amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu] [149492.279470] drm_dev_unregister+0x3c/0xe0 [drm] [149492.279485] amdgpu_pci_remove+0x19/0x30 [amdgpu] [149492.279487] pci_device_remove+0x39/0xc0 [149492.279490] device_release_driver_internal+0x155/0x210 [149492.279491] driver_detach+0x38/0x70 [149492.279493] bus_remove_driver+0x4c/0xa0 [149492.279494] driver_unregister+0x2c/0x40 [149492.279496] pci_unregister_driver+0x21/0x90 [149492.279520] amdgpu_exit+0x15/0x406 [amdgpu] [149492.279523] SyS_delete_module+0x1a8/0x270 [149492.279525] ? exit_to_usermode_loop+0x92/0xa0 [149492.279528] entry_SYSCALL_64_fastpath+0x13/0x94 [149492.279529] RIP: 0033:0x7fc53fcb68e7 [149492.279529] RSP: 002b:00007ffcfbfaabb8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [149492.279531] RAX: ffffffffffffffda RBX: 0000563117adb200 RCX: 00007fc53fcb68e7 [149492.279531] RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000563117adb268 [149492.279532] RBP: 0000000000000003 R08: 0000000000000000 R09: 1999999999999999 [149492.279533] R10: 0000000000000883 R11: 0000000000000206 R12: 00007ffcfbfa9ba0 [149492.279533] R13: 0000000000000000 R14: 0000000000000000 R15: 0000563117adb200 [149492.279534] Code: 55 48 89 e5 e8 77 fe ff ff 84 c0 74 02 5d c3 80 3d 40 f2 a4 00 00 75 f5 48 c7 c7 20 3c ca 81 c6 05 30 f2 a4 00 01 e8 91 f0 d7 ff <0f> ff 5d c3 90 55 48 89 fe bf 01 00 00 00 48 89 e5 e8 9f fe ff [149492.279557] ---[ end trace 2d4e0ffcb66a1016 ]--- Unref the fence *after* waiting for it. v2: Set man->move to NULL after dropping the last ref (Christian König) Fixes: aff98ba1fdb8 (drm/ttm: wait for eviction in ttm_bo_force_list_clean) Signed-off-by: John Brooks <john@fastquake.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27drm/radeon: Fix eDP for single-display iMac10,1 (v2)Mario Kleiner
commit 564d8a2cf3abf16575af48bdc3e86e92ee8a617d upstream. The late 2009, 27 inch Apple iMac10,1 has an internal eDP display and an external Mini- Displayport output, driven by a DCE-3.2, RV730 Radeon Mobility HD-4670. The machine worked fine in a dual-display setup with eDP panel + externally connected HDMI or DVI-D digital display sink, connected via MiniDP to DVI or HDMI adapter. However, booting the machine single-display with only eDP panel results in a completely black display - even backlight powering off, as soon as the radeon modesetting driver loads. This patch fixes the single dispay eDP case by assigning encoders based on dig->linkb, similar to DCE-4+. While this should not be generally necessary (Alex: "...atom on normal boards should be able to handle any mapping."), Apple seems to use some special routing here. One remaining problem not solved by this patch is that an external Minidisplayport->DP sink does still not work on iMac10,1, whereas external DVI and HDMI sinks continue to work. The problem affects at least all tested kernels since Linux 3.13 - didn't test earlier kernels, so backporting to stable probably makes sense. v2: With the original patch from 2016, Alex was worried it will break other DCE3.2 systems. Use dmi_match() to apply this special encoder assignment only for the Apple iMac 10,1 from late 2009. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27drm/radeon/ci: disable mclk switching for high refresh rates (v2)Alex Deucher
commit ab03d9fe508f4e2914a8f4a9eef1b21051cacd0f upstream. Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27drm/amd/amdgpu: Return error if initiating read out of range on vramTom St Denis
commit 9156e723301c0a7a7def4cde820e018ce791b842 upstream. If you initiate a read that is out of the VRAM address space return ENXIO instead of 0. Reads that begin below that point will read upto the VRAM limit as before. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-12drm/virtio: don't leak bo on drm_gem_object_init failureGerd Hoffmann
commit 385aee965b4e4c36551c362a334378d2985b722a upstream. Reported-by: 李强 <liqiang6-s@360.cn> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170406155941.458-1-kraxel@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05drm/amd/powerplay: refine vce dpm update code on Cz.Rex Zhu
[ Upstream commit ab8db87b8256e13a62f10af1d32f5fc233c398cc ] Program HardMin based on the vce_arbiter.ecclk if ecclk is 0, disable ECLK DPM 0. Otherwise VCE could hang if switching SCLK from DPM 0 to 6/7 Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05drm/amd/powerplay: fix vce cg logic error on CZ/St.Rex Zhu
[ Upstream commit 3731d12dce83d47b357753ffc450ce03f1b49688 ] can fix Bug 191281: vce ib test failed. when vce idle, set vce clock gate, so the clock in vce domain will be disabled. when need to encode, disable vce clock gate, enable the clocks to vce engine. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05drm/radeon/si: load special ucode for certain MC configsAlex Deucher
[ Upstream commit ef736d394e85b1bf1fd65ba5e5257b85f6c82325 ] Special MC ucode is required for these memory configurations. Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05drm/etnaviv: trick drm_mm into giving out a low IOVALucas Stach
[ Upstream commit 3546fb0cdac25a79c89d87020566fab52b92867d ] After rollover of the IOVA space, we want to get a low IOVA address, otherwise the the games we play by remembering the last IOVA are pointless. When we search for a free hole with DRM_MM_SEARCH_DEFAULT, drm_mm will pop the next entry from the free holes stack, which will likely be a high IOVA. By using DRM_MM_SEARCH_BELOW we can trick drm_mm into reversing the search and provide us with a low IOVA. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Wladimir van der Laan <laanwj@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05drm/amdgpu: check ring being ready before usingDing Pixel
[ Upstream commit c5f21c9f878b8dcd54d0b9739c025ca73cb4c091 ] Return success when the ring is properly initialized, otherwise return failure. Tonga SRIOV VF doesn't have UVD and VCE engines, the initialization of these IPs is bypassed. The system crashes if application submit IB to their rings which are not ready to use. It could be a common issue if IP having ring buffer is disabled for some reason on specific ASIC, so it should check the ring being ready to use. Bug: amdgpu_test crashes system on Tonga VF. Signed-off-by: Ding Pixel <Pixel.Ding@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05drm/amdgpu: add support for new hainan variantsAlex Deucher
[ Upstream commit 17324b6add82d6c0bf119f1d1944baef392a4e39 ] New hainan parts require updated smc firmware. Cc: Sonny Jiang <sonny.jiang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05drm/amdgpu: fix program vce instance logic error.Rex Zhu
[ Upstream commit 50a1ebc70a2803deb7811fc73fb55d70e353bc34 ] need to clear bit31-29 in GRBM_GFX_INDEX, then the program can be valid. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgrDeepak Rawat
commit 82fcee526ba8ca2c5d378bdf51b21b7eb058fe3a upstream. The hash table created during vmw_cmdbuf_res_man_create was never freed. This causes memory leak in context creation. Added the corresponding drm_ht_remove in vmw_cmdbuf_res_man_destroy. Tested for memory leak by running piglit overnight and kernel memory is not inflated which earlier was. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05drm/ast: Handle configuration without P2A bridgeRussell Currey
commit 71f677a91046599ece96ebab21df956ce909c456 upstream. The ast driver configures a window to enable access into BMC memory space in order to read some configuration registers. If this window is disabled, which it can be from the BMC side, the ast driver can't function. Closing this window is a necessity for security if a machine's host side and BMC side are controlled by different parties; i.e. a cloud provider offering machines "bare metal". A recent patch went in to try to check if that window is open but it does so by trying to access the registers in question and testing if the result is 0xffffffff. This method will trigger a PCIe error when the window is closed which on some systems will be fatal (it will trigger an EEH for example on POWER which will take out the device). This patch improves this in two ways: - First, if the firmware has put properties in the device-tree containing the relevant configuration information, we use these. - Otherwise, a bit in one of the SCU scratch registers (which are readable via the VGA register space and writeable by the BMC) will indicate if the BMC has closed the window. This bit has been defined by Y.C Chen from Aspeed. If the window is closed and the configuration isn't available from the device-tree, some sane defaults are used. Those defaults are hopefully sufficient for standard video modes used on a server. Signed-off-by: Russell Currey <ruscur@russell.cc> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-29drm/amdgpu: adjust default display clockAlex Deucher
commit 52b482b0f4fd6d5267faf29fe91398e203f3c230 upstream. Increase the default display clock on newer asics to accomodate some high res modes with really high refresh rates. bug: https://bugs.freedesktop.org/show_bug.cgi?id=93826 Acked-by: Chunming Zhou <david1.zhou@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-29drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGatingAlex Deucher
commit 05b4017b37f1fce4b7185f138126dd8decdb381f upstream. We were using the wrong structure which lead to an overflow on some boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=101387 Acked-by: Chunming Zhou <david1.zhou@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-29drm/radeon: add a quirk for Toshiba Satellite L20-183Alex Deucher
commit acfd6ee4fa7ebeee75511825fe02be3f7ac1d668 upstream. Fixes resume from suspend. bug: https://bugzilla.kernel.org/show_bug.cgi?id=196121 Reported-by: Przemek <soprwa@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-29drm/radeon: add a PX quirk for another K53TK variantAlex Deucher
commit 4eb59793cca00b0e629b6d55b5abb5acb82c5868 upstream. Disable PX on these systems. bug: https://bugs.freedesktop.org/show_bug.cgi?id=101491 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-24drm/vc4: Fix OOPSes from trying to cache a partially constructed BO.Eric Anholt
commit ca39b449f6d03e8235969f12f5dd25b8eb4304d6 upstream. If a CMA allocation failed, the partially constructed BO would be unreferenced through the normal path, and we might choose to put it in the BO cache. If we then reused it before it expired from the cache, the kernel would OOPS. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170301185602.6873-2-eric@anholt.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-24drm/mediatek: fix mtk_hdmi_setup_vendor_specific_infoframe mistakeYYS
commit 014580ffab654bb83256783a2b185cf6c06dffaa upstream. mtk_hdmi_setup_vendor_specific_infoframe will return before handle mtk_hdmi_hw_send_info_frame.Because hdmi_vendor_infoframe_pack returns the number of bytes packed into the binary buffer or a negative error code on failure. So correct it. Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-24drm/i915: Fix GVT-g PVINFO version compatibility checkZhenyu Wang
commit c380f681245d7ae57f17d9ebbbe8f8f1557ee1fb upstream. Current it's strictly checked if PVINFO version matches 1.0 for GVT-g i915 guest which doesn't help for compatibility at all and forces GVT-g host can't extend PVINFO easily with version bump for real compatibility check. This fixes that to check minimal required PVINFO version instead. v2: - drop unneeded version macro - use only major version for sanity check v3: - fix up PVInfo value with kernel type - one indent fix Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chuanxiao Dong <chuanxiao.dong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170609074805.5101-1-zhenyuw@linux.intel.com (cherry picked from commit 0c8792d00d38de85b6ceb1dd67d3ee009d7c8e42) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-24drm/amdgpu: Fix overflow of watermark calcs at > 4k resolutions.Mario Kleiner
commit bea10413934dcf98cb9b2dfcdc56e1d28f192897 upstream. Commit d63c277dc672e0 ("drm/amdgpu: Make display watermark calculations more accurate") made watermark calculations more accurate, but not for > 4k resolutions on 32-Bit architectures, as it introduced an integer overflow for those setups and resolutions. Fix this by proper u64 casting and division. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Fixes: d63c277dc672 ("drm/amdgpu: Make display watermark calculations more accurate") Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.Maarten Lankhorst
commit 4e3aed844547f63614363a386de126e6304e55fb upstream. On some systems there can be a race condition in which no crtc state is added to the first atomic commit. This results in all crtc's having a null DDB allocation, causing a FIFO underrun on any update until the first modeset. Changes since v1: - Do not take the connection_mutex, this is already done below. Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Inspired-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 98d39494d375 ("drm/i915/gen9: Compute DDB allocation at atomic check time (v4)") Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.com Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 367d73d2806085bb507ab44c1f532640917fd5ca) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-06-17drm/i915: Workaround VLV/CHV DSI scanline counter hardware failVille Syrjälä
commit 8f4d38099b3098eae75f7755e1801931f8141350 upstream. The scanline counter is bonkers on VLV/CHV DSI. The scanline counter increment is not lined up with the start of vblank like it is on every other platform and output type. This causes problems for both the vblank timestamping and atomic update vblank evasion. On my FFRD8 machine at least, the scanline counter increment happens about 1/3 of a scanline ahead of the start of vblank (which is where all register latching happens still). That means we can't trust the scanline counter to tell us whether we're in vblank or not while we're on that particular line. In order to keep vblank timestamping in working condition when called from the vblank irq, we'll leave scanline_offset at one, which means that the entire line containing the start of vblank is considered to be inside the vblank. For the vblank evasion we'll need to consider that entire line to be bad, since we can't tell whether the registers already got latched or not. And we can't actually use the start of vblank interrupt to get us past that line as the interrupt would fire too soon, and then we'd up waiting for the next start of vblank instead. One way around that would using the frame start interrupt instead since that wouldn't fire until the next scanline, but that would require some bigger changes in the interrupt code. So for simplicity we'll just poll until we get past the bad line. v2: Adjust the comments a bit Cc: Jonas Aaberg <cja@gmx.net> Tested-by: Jonas Aaberg <cja@gmx.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.com Tested-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> (cherry picked from commit ec1b4ee2834e66884e5b0d3d465f347ff212e372) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17drm/ast: Fixed system hanged if disable P2AY.C. Chen
[ Upstream commit 6c971c09f38704513c426ba6515f22fb3d6c87d5 ] The original ast driver will access some BMC configuration through P2A bridge that can be disabled since AST2300 and after. It will cause system hanged if P2A bridge is disabled. Here is the update to fix it. Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17drm/nouveau: Fix drm poll_helper handlingPeter Ujfalusi
[ Upstream commit 9a2eba337cacefc95b97c2726e3efdd435b3460e ] Commit cae9ff036eea effectively disabled the drm poll_helper by checking the wrong flag to see if the driver should enable the poll or not: mode_config.poll_enabled is only set to true by poll_init and it is not indicating if the poll is enabled or not. nouveau_display_create() will initialize the poll and going to disable it right away. After poll_init() the mode_config.poll_enabled will be true, but the poll itself is disabled. To avoid the race caused by calling the poll_enable() from different paths, this patch will enable the poll from one place, in the nouveau_display_hpd_work(). In case the pm_runtime is disabled we will enable the poll in nouveau_drm_load() once. Fixes: cae9ff036eea ("drm/nouveau: Don't enabling polling twice on runtime resume") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lyude <lyude@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-17drm/nouveau: Don't enabling polling twice on runtime resumeLyude Paul
[ Upstream commit cae9ff036eea577856d5b12860b4c79c5e71db4a ] As it turns out, on cards that actually have CRTCs on them we're already calling drm_kms_helper_poll_enable(drm_dev) from nouveau_display_resume() before we call it in nouveau_pmops_runtime_resume(). This leads us to accidentally trying to enable polling twice, which results in a potential deadlock between the RPM locks and drm_dev->mode_config.mutex if we end up trying to enable polling the second time while output_poll_execute is running and holding the mode_config lock. As such, make sure we only enable polling in nouveau_pmops_runtime_resume() if we need to. This fixes hangs observed on the ThinkPad W541 Signed-off-by: Lyude <lyude@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Kilian Singer <kilian.singer@quantumtechnology.info> Cc: Lukas Wunner <lukas@wunner.de> Cc: David Airlie <airlied@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2026-05-12 08:12:33 +0000