summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2023-07-27drm/tegra: dpaux: Use devm_platform_ioremap_resource()Yang Li
Convert platform_get_resource(),devm_ioremap_resource() to a single call to devm_platform_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230421084952.45275-1-yang.lee@linux.alibaba.com
2023-07-27gpu: host1x: Return error when context device not attached to IOMMUMikko Perttunen
If a context device was not attached to IOMMU, we kept the old success err value causing context devices to be unregistered but success to be returned. This would mean that things would go on but with context isolation disabled. To decide on an explicit behavior, let's return an error code here instead. If someone wants to go without IOMMU on a platform modern enough to support context isolation, they can remove the context devices from device tree. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230413082202.114721-2-cyndis@kapsi.fi
2023-07-27drm/tegra: Add error check for NVDEC firmware memory allocationMikko Perttunen
The return value for tegra_drm_alloc was missing an error check. Add one. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230413082202.114721-1-cyndis@kapsi.fi
2023-07-27drm/i915: Avoid -Wconstant-logical-operand in nsecs_to_jiffies_timeout()Nathan Chancellor
A proposed update to clang's -Wconstant-logical-operand to warn when the left hand side is a constant shows the following instance in nsecs_to_jiffies_timeout() when NSEC_PER_SEC is not a multiple of HZ, such as CONFIG_HZ=300: drivers/gpu/drm/i915/gem/i915_gem_wait.c:189:24: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] 189 | if (NSEC_PER_SEC % HZ && | ~~~~~~~~~~~~~~~~~ ^ drivers/gpu/drm/i915/gem/i915_gem_wait.c:189:24: note: use '&' for a bitwise operation 189 | if (NSEC_PER_SEC % HZ && | ^~ | & drivers/gpu/drm/i915/gem/i915_gem_wait.c:189:24: note: remove constant to silence this warning 1 warning generated. Turn this into an explicit comparison against zero to make the expression a boolean to make it clear this should be a logical check, not a bitwise one. Link: https://reviews.llvm.org/D142609 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230718-nsecs_to_jiffies_timeout-constant-logical-operand-v1-2-36ed8fc8faea@kernel.org
2023-07-27drm/v3d: Avoid -Wconstant-logical-operand in nsecs_to_jiffies_timeout()Nathan Chancellor
A proposed update to clang's -Wconstant-logical-operand to warn when the left hand side is a constant shows the following instance in nsecs_to_jiffies_timeout() when NSEC_PER_SEC is not a multiple of HZ, such as CONFIG_HZ=300: In file included from drivers/gpu/drm/v3d/v3d_debugfs.c:12: drivers/gpu/drm/v3d/v3d_drv.h:343:24: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] 343 | if (NSEC_PER_SEC % HZ && | ~~~~~~~~~~~~~~~~~ ^ drivers/gpu/drm/v3d/v3d_drv.h:343:24: note: use '&' for a bitwise operation 343 | if (NSEC_PER_SEC % HZ && | ^~ | & drivers/gpu/drm/v3d/v3d_drv.h:343:24: note: remove constant to silence this warning 1 warning generated. Turn this into an explicit comparison against zero to make the expression a boolean to make it clear this should be a logical check, not a bitwise one. Link: https://reviews.llvm.org/D142609 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230718-nsecs_to_jiffies_timeout-constant-logical-operand-v1-1-36ed8fc8faea@kernel.org
2023-07-27drm/ssd130x: Use shadow-buffer helpers when managing plane's stateJavier Martinez Canillas
The commit 45b58669e532 ("drm/ssd130x: Allocate buffer in the plane's .atomic_check() callback") moved the buffers allocation to be done in the primary plane's .atomic_check() callback. But it missed that since the driver uses a shadow-buffered plane, the __drm_gem_{reset,duplicate,destroy}_shadow_plane() helper functions must be used in the struct drm_plane_funcs handlers. This was missed because the mentioned commit did not remove the macro DRM_GEM_SHADOW_PLANE_FUNCS, which leads to the custom plane's atomic state management handlers to not be used. Fixes: 45b58669e532 ("drm/ssd130x: Allocate buffer in the plane's .atomic_check() callback") Reported-by: Arnd Bergmann <arnd@arndb.de> Closes: https://lore.kernel.org/dri-devel/20230727122412.2464210-1-arnd@kernel.org Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230727140453.577445-1-javierm@redhat.com
2023-07-26drm/ssd130x: Allocate buffer in the plane's .atomic_check() callbackJavier Martinez Canillas
Drivers are not allowed to fail after drm_atomic_helper_swap_state() has been called and the new atomic state is stored into the current sw state. Since the struct ssd130x_device .data_array is allocated in the encoder's .atomic_enable callback, the operation can fail and this is after the new state has been stored. So it can break an atomic mode settings assumption. Fix this by having custom helpers to allocate, duplicate and destroy the plane state, that will take care of allocating and freeing these buffers. Suggested-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Maxime Ripard <mripard@kernel.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230726105433.389740-2-javierm@redhat.com
2023-07-26drm/ssd130x: Inline the ssd130x_buf_{alloc, free}() function helpersJavier Martinez Canillas
There is only a single caller for both helper functions and these don't do much other than allocate and free two buffers, so let's just inline them. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230726105433.389740-1-javierm@redhat.com
2023-07-25drm/ast: Do not enable PCI resources multiple timesThomas Zimmermann
Remove ast_init_pci_config() as the ast driver already enables the PCI resources by calling pcim_enable_device(). Suggested-by: Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230712130826.3318-1-tzimmermann@suse.de
2023-07-24drm/panel: ld9040: add backlight Kconfig dependencyArnd Bergmann
The driver now uses the backlight interface, which breaks when that is disabled: ld.lld: error: undefined symbol: devm_backlight_device_register Enforce the necessary Kconfig dependency to avoid this. Fixes: c2268daa65fb ("drm/panel: ld9040: Register a backlight device") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230724121736.1293270-1-arnd@kernel.org
2023-07-24drm/omapdrm: Set fbdev FBINFO_VIRTFB flagThomas Zimmermann
Mark the framebuffer with FBINFO_VIRTFB. The framebuffer range is in DMA-able memory and should be accessed with the CPU's regular memory ops. v2: * drop FBINFO_DEFAULT Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Maxime Ripard <mripard@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-11-tzimmermann@suse.de
2023-07-24drm/omapdrm: Use GEM mmap for fbdev emulationThomas Zimmermann
The fbdev emulation currently uses fbdev's default mmap code, which has been written for I/O memory. Provide an mmap that uses GEM's mmap infrastructure. Utilize fine-grained fbdev macros to initialize struct fb_ops. The macros set the read/write and the draw callbacks for DMA memory. Set the fb_mmap callback to omapdrm's new mmap helper. Also select the correct Kconfig token for fbdev's DMA helpers. Note that the DMA helpers are the same as for system memory. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Maxime Ripard <mripard@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-10-tzimmermann@suse.de
2023-07-24drm/omapdrm: Set VM flags in GEM-object mmap functionThomas Zimmermann
Use the mmap callback in struct drm_gem_object_funcs to set the VM flags. Replace a number of mmap helpers in omapdrm with their GEM helper counterparts. Generate DRM's file-operations instance with GEM's DEFINE_DRM_GEM_FOPS. The omapdrm driver uses DRM's drm_gem_mmap() helper to prepare the VMA structure. It then modifies the resulting VMA state in its own helper omap_gem_mmap_obj(). The patch improves this by setting up the VMA in the mmap callback in drm_gem_object_funcs, which is called from within drm_gem_mmap(). Omapdrm's omap_gem_mmap() and omap_gem_mmap() can then be removed from the driver. A call to drm_gem_mmap() is sufficient for the mmap operation. Finally, with the omap functions gone, the drivers file_ops in omapdriver_fops can be generated with DEFINE_DRM_GEM_FOPS, which sets DRM's default helpers. v2: * detailed commit message (Javier) * do not set VM_PFNMAP Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Maxime Ripard <mripard@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-9-tzimmermann@suse.de
2023-07-24drm/exynos: Set fbdev FBINFO_VIRTFB flagThomas Zimmermann
Mark the framebuffer with FBINFO_VIRTFB. The framebuffer range is in DMA-able memory and should be accessed with the CPU's regular memory ops. v2: * drop FBINFO_FLAG_DEFAULT Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by : Inki Dae <inki.dae@samsung.com> Acked-by: Maxime Ripard <mripard@kernel.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-8-tzimmermann@suse.de
2023-07-24drm/exynos: Use fbdev DMA helpersThomas Zimmermann
Use fbdev's DMA helpers for fbdev emulation. The driver previously used the I/O-memory helpers, while allocating DMA-able system memory. This could (in theory) result in bus errors from accessing the memory range. This bug has been present since the exynos driver was first added. v2: * drop the pointless Fixes tag (Javier) * fix typo in commit message Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Maxime Ripard <mripard@kernel.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-7-tzimmermann@suse.de
2023-07-24drm/tegra: Store pointer to vmap'ed framebuffer in screen_bufferThomas Zimmermann
Tegra uses DMA-able memory, which has to be acessed with CPU ops for system-memory. Store the framebuffer's vmap address in struct fb_info.screen_buffer. The currently used field 'screen_base' is for I/O memory. Suggested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-6-tzimmermann@suse.de
2023-07-24drm/tegra: Set fbdev FBINFO_VIRTFB flagThomas Zimmermann
Mark the framebuffer with FBINFO_VIRTFB. The framebuffer range is in DMA-able memory and should be accessed with the CPU's regular memory ops. v2: * drop FBINFO_DEFAULT Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Maxime Ripard <mripard@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-5-tzimmermann@suse.de
2023-07-24drm/tegra: Use fbdev DMA helpersThomas Zimmermann
Use fbdev's DMA helpers for fbdev emulation. They are equivalent to the previously used system-memory helpers, so no functional changes here. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Maxime Ripard <mripard@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-4-tzimmermann@suse.de
2023-07-24drm/fbdev-dma: Use fbdev DMA helpersThomas Zimmermann
Use fbdev's DMA helpers for fbdev-dma. They are equivalent to the previously used system-memory helpers, so no functional changes here. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230707083422.18691-3-tzimmermann@suse.de
2023-07-24drm/panel: db7430: remove unused variablesLuca Ceresoli
These variables are never referenced in the code. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230719105829.148011-1-luca.ceresoli@bootlin.com
2023-07-24drm: Remove flag FBINFO_DEFAULT from fbdev emulationThomas Zimmermann
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by framebuffer_alloc(). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v2: * fix commit message (Miguel) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-2-tzimmermann@suse.de
2023-07-24Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get v6.5-rc2. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2023-07-24drm/managed: Clean up GFP_ flag usage in drmm_kmalloc()Dan Carpenter
This code is not using the correct gfp flags which were passed in. However, this does not affect runtime because kstrdup_const() is a no-op in this context. (It just returns the "kmalloc" string literal without doing an allocation.) Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/ddf86b59-696a-45f0-96dd-b87aa7b9ab2e@moroto.mountain
2023-07-24drm/bridge: Remove redundant i2c_client in anx7625/it6505Pin-yen Lin
These two drivers embed a i2c_client in their private driver data, but only strict device is actually needed. Replace the i2c_client reference with a struct device one. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230718110407.1005200-1-wenst@chromium.org
2023-07-24drm/bridge: it6505: Fix Kconfig indentationPin-yen Lin
Replace the spaces with tab characters in the Kconfig file. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230712065054.2377278-1-wenst@chromium.org
2023-07-24drm/bridge: anx7625: Drop device lock before drm_helper_hpd_irq_event()Chen-Yu Tsai
The device lock is used to serialize the low level power sequencing operations. Since drm_helper_hpd_irq_event() could end up calling .atomic_enable, which also calls power sequencing functions through runtime PM, this results in a real deadlock. This was observed on an MT8192-based Chromebook's external display (with appropriate patches [1] and DT changes applied). Move the drm_helper_hpd_irq_event() call outside of the lock range. The lock only needs to be held so that the device status can be read back. This is the bare minimum change to avoid the deadlock. The lock could be dropped completely and have pm_runtime_get_if_in_use() increase the reference count, but this is not the same as pm_runtime_suspended(). Dropping the lock completely also causes the internal display of the same device to not function correctly if the internal bridge's interrupt line is added in the device tree. Both the internal and external display of said device each use one anx7625 bridge. [1] https://lore.kernel.org/dri-devel/20230112042104.4107253-1-treapking@chromium.org/ Fixes: 60487584a79a ("drm/bridge: anx7625: refactor power control to use runtime PM framework") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230710085922.1871465-1-wenst@chromium.org
2023-07-22drm: Make FB_CORE to be selected if DRM fbdev emulation is enabledJavier Martinez Canillas
Now that fbdev core has been split in FB_CORE and FB, make the DRM symbol to select the FB_CORE option if the DRM fbdev emulation layer is enabled. This allows to disable the CONFIG_FB option if is not needed, which will avoid the need to explicitly disable each of the legacy fbdev drivers. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230719081544.741051-5-javierm@redhat.com
2023-07-22drm/ssd130x: Fix pitch calculation in ssd130x_fb_blit_rect()Geert Uytterhoeven
The page height must be taken into account only for vertical coordinates and heights, not for horizontal coordinates and widths. Fixes: 179a790aaf2a ("drm/ssd130x: Set the page height value in the device info data") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/54deec2ec533e90544faa8c60a0c2518c58f3e9c.1689252746.git.geert@linux-m68k.org
2023-07-21drm/bridge: tc358767: give VSDELAY some positive valueDavid Jander
The documentation is not clear about how this delay works. Empirical tests have shown that with a VSDELAY of 0, the first scanline is not properly formatted in the output stream when DSI->DP mode is used. The calculation spreadsheets from Toshiba seem to always make this value equal to the HFP + 10 for DSI->DP use-case. For DSI->DPI this value should be > 2 and for DPI->DP it seems to always be 0x64. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Marek Vasut <marex@denx.de> # TC9595 Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230721165328.3968759-2-l.stach@pengutronix.de
2023-07-21drm/bridge: tc358767: increase PLL lock time delayDavid Jander
The PLL often fails to lock with this delay. The new value was determined by trial and error increasing the delay bit by bit until the error did not occurr anymore even after several tries. Then double that value was taken as the minimum delay to be safe. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> # TC9595 Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230721165328.3968759-1-l.stach@pengutronix.de
2023-07-21drm/arm/komeda: Remove component framework and add a simple encoderFaiz Abbas
The Komeda driver always expects the remote connector node to initialize an encoder. It uses the component aggregator framework which consists of component->bind() calls used to initialize the remote encoder and attach it to the crtc. This makes it incompatible with connector drivers which implement drm_bridge APIs. Remove all component framework calls from the komeda driver and declare and attach an encoder inside komeda_crtc_add(). The remote connector driver has to implement the DRM bridge APIs which can be used to glue the encoder to the remote connector. Since we usually pair this with a component encoder that also implements a drm_bridge, dropping support is not expected to affect users of this driver. Signed-off-by: Faiz Abbas <faiz.abbas@arm.com> Message-ID: <20230712064937.25192-1-faiz.abbas@arm.com> [small white space fixes flagged by checkpatch.pl] Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230712064937.25192-1-faiz.abbas@arm.com
2023-07-21drm: adv7511: Fix low refresh rate register for ADV7533/5Bogdan Togorean
For ADV7533 and ADV7535 low refresh rate is selected using bits [3:2] of 0x4a main register. So depending on ADV model write 0xfb or 0x4a register. Fixes: 2437e7cd88e8 ("drm/bridge: adv7533: Initial support for ADV7533") Reviewed-by: Robert Foss <rfoss@kernel.org> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com> Signed-off-by: Alexandru Ardelean <alex@shruggie.ro> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230719060143.63649-1-alex@shruggie.ro
2023-07-21drm: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
2023-07-21gpu/host1x: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714174549.4056675-1-robh@kernel.org
2023-07-21gpu: host1x: Stop open-coding of_device_uevent()Miquel Raynal
There is apparently no reasons to open-code of_device_uevent() besides: - The helper receives a struct device while we want to use the of_node member of the struct device *parent*. - of_device_uevent() could not be called by modules because of a missing EXPORT_SYMBOL*(). In practice, the former point is not very constraining, just calling of_device_uevent(dev->parent, ...) would have made the trick. The latter point is more an observation rather than a real blocking point because nothing prevented of_uevent() (called by the inline function of_device_uevent()) to be exported to modules. In practice, this helper is now exported, so nothing prevent us from using of_device_uevent() anymore. Let's use the core helper directly instead of open-coding it. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230622213214.3586530-3-miquel.raynal@bootlin.com
2023-07-20drm: debugfs: Silence warning from castSteven Price
Casting a pointer to an integer of a different size generates a warning from the compiler. First cast the pointer to a pointer-sized type to keep the compiler happy. Fixes: 4f66feeab173 ("drm: debugfs: provide infrastructure to dump a DRM GPU VA space") Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/010b58cd-1225-02f7-33f0-c678e5cd349d@arm.com
2023-07-20drm: manager: Fix printk format for size_tSteven Price
sizeof() returns a size_t which may be different to an unsigned long. Use the correct format specifier of '%zu' to prevent compiler warnings. Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings") Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/2bf64010-c40a-8b84-144c-5387412b579e@arm.com
2023-07-20drm/panel: simple: Drop prepared_timeMarek Vasut
This has been superseded by RPM in commit 3235b0f20a0a ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare") and the last user of the non-RPM case has been dropped in commit b6d5ffce11dd ("drm/panel-simple: Non-eDP panels don't need "HPD" handling") whatever is left in this driver is just assigned and never used. Drop the remaining parts. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230709162253.464299-1-marex@denx.de
2023-07-20drm/syncobj: add IOCTL to register an eventfdSimon Ser
Introduce a new DRM_IOCTL_SYNCOBJ_EVENTFD IOCTL which signals an eventfd from a syncobj. This is useful for Wayland compositors to handle wait-before-submit. Wayland clients can send a timeline point to the compositor before the point has materialized yet, then compositors can wait for the point to materialize via this new IOCTL. The existing DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT IOCTL is not suitable because it blocks. Compositors want to integrate the wait with their poll(2)-based event loop. Requirements for new uAPI: - User-space patch: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4262 - IGT: https://lists.freedesktop.org/archives/igt-dev/2023-July/057893.html v2: - Wait for fence when flags is zero - Improve documentation (Pekka) - Rename IOCTL (Christian) - Fix typo in drm_syncobj_add_eventfd() (Christian) v3: - Link user-space + IGT patches - Add reference from overview docs v4: fix IOCTL number conflict with GETFB2 (Nicholas Choi, Vitaly Prosyak) Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Daniel Stone <daniel@fooishbar.org> Cc: James Jones <jajones@nvidia.com> Cc: Austin Shafer <ashafer@nvidia.com> Cc: Vitaly Prosyak <vprosyak@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714111257.11940-1-contact@emersion.fr
2023-07-20drm: debugfs: provide infrastructure to dump a DRM GPU VA spaceDanilo Krummrich
This commit adds a function to dump a DRM GPU VA space and a macro for drivers to register the struct drm_info_list 'gpuvas' entry. Most likely, most drivers might maintain one DRM GPU VA space per struct drm_file, but there might also be drivers not having a fixed relation between DRM GPU VA spaces and a DRM core infrastructure, hence we need the indirection via the driver iterating it's maintained DRM GPU VA spaces. Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230720001443.2380-3-dakr@redhat.com
2023-07-20drm: manager to keep track of GPUs VA mappingsDanilo Krummrich
Add infrastructure to keep track of GPU virtual address (VA) mappings with a decicated VA space manager implementation. New UAPIs, motivated by Vulkan sparse memory bindings graphics drivers start implementing, allow userspace applications to request multiple and arbitrary GPU VA mappings of buffer objects. The DRM GPU VA manager is intended to serve the following purposes in this context. 1) Provide infrastructure to track GPU VA allocations and mappings, using an interval tree (RB-tree). 2) Generically connect GPU VA mappings to their backing buffers, in particular DRM GEM objects. 3) Provide a common implementation to perform more complex mapping operations on the GPU VA space. In particular splitting and merging of GPU VA mappings, e.g. for intersecting mapping requests or partial unmap requests. Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Matthew Brost <matthew.brost@intel.com> Tested-by: Donald Robson <donald.robson@imgtec.com> Suggested-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230720001443.2380-2-dakr@redhat.com
2023-07-17drm/bridge: anx7625: Use common macros for HDCP capabilitiesChen-Yu Tsai
The DRM DP code has macros for the DP HDCP capabilities. Use them in the anx7625 driver instead of raw numbers. Fixes: cd1637c7e480 ("drm/bridge: anx7625: add HDCP support") Suggested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230710091203.1874317-1-wenst@chromium.org
2023-07-17drm/bridge: anx7625: Use common macros for DP power sequencing commandsChen-Yu Tsai
The DRM DP code has macros for the DP power sequencing commands. Use them in the anx7625 driver instead of raw numbers. Fixes: 548b512e144f ("drm/bridge: anx7625: send DPCD command to downstream") Fixes: 27f26359de9b ("drm/bridge: anx7625: Set downstream sink into normal status") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230710090929.1873646-1-wenst@chromium.org
2023-07-17Merge tag 'drm-misc-next-2023-07-13' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.6: UAPI Changes: * fbdev: * Make fbdev userspace interfaces optional; only leaves the framebuffer console active * prime: * Support dma-buf self-import for all drivers automatically: improves support for many userspace compositors Cross-subsystem Changes: * backlight: * Fix interaction with fbdev in several drivers * base: Convert struct platform.remove to return void; part of a larger, tree-wide effort * dma-buf: Acquire reservation lock for mmap() in exporters; part of an on-going effort to simplify locking around dma-bufs * fbdev: * Use Linux device instead of fbdev device in many places * Use deferred-I/O helper macros in various drivers * i2c: Convert struct i2c from .probe_new to .probe; part of a larger, tree-wide effort * video: * Avoid including <linux/screen_info.h> Core Changes: * atomic: * Improve logging * prime: * Remove struct drm_driver.gem_prime_mmap plus driver updates: all drivers now implement this callback with drm_gem_prime_mmap() * gem: * Support execution contexts: provides locking over multiple GEM objects * ttm: * Support init_on_free * Swapout fixes Driver Changes: * accel: * ivpu: MMU updates; Support debugfs * ast: * Improve device-model detection * Cleanups * bridge: * dw-hdmi: Improve support for YUV420 bus format * dw-mipi-dsi: Fix enable/disable of DSI controller * lt9611uxc: Use MODULE_FIRMWARE() * ps8640: Remove broken EDID code * samsung-dsim: Fix command transfer * tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups * Cleanups * ingenic: * Kconfig REGMAP fixes * loongson: * Support display controller * mgag200: * Minor fixes * mxsfb: * Support disabling overlay planes * nouveau: * Improve VRAM detection * Various fixes and cleanups * panel: * panel-edp: Support AUO B116XAB01.4 * Support Visionox R66451 plus DT bindings * Cleanups * ssd130x: * Support per-controller default resolution plus DT bindings * Reduce memory-allocation overhead * Cleanups * tidss: * Support TI AM625 plus DT bindings * Implement new connector model plus driver updates * vkms * Improve write-back support * Documentation fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
2023-07-17drm/drv: use enum drm_minor_type when appropriateSimon Ser
This makes it easier to figure out what the "type" variable can be set to when reading the implementation of these functions. Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by:James Zhu <James.Zhu@amd.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Christian König <christian.koenig@amd.com> Cc: Marek Olšák <marek.olsak@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20230714104557.518457-1-contact@emersion.fr
2023-07-14drm/panel: ld9040: Register a backlight devicePaul Cercueil
Register a backlight device to be able to switch between all the gamma levels. v2: Remove .get_brightness() callback, use bl_get_data() and backlight_get_brightness() Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230708084027.18352-3-paul@crapouillou.net
2023-07-14drm/panel: ld9040: Use better magic valuesPaul Cercueil
I have no idea what the prior magic values mean, and I have no idea what my replacement (extracted from [1]) magic values mean. What I do know, is that these new values result in a much better picture, where the blacks are really black (as you would expect on an AMOLED display) instead of grey-ish. [1]: https://github.com/dorimanx/Dorimanx-SG2-I9100-Kernel/blob/master-jelly-bean/arch/arm/mach-exynos/u1-panel.h v2: Remove spurious new line Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230708084027.18352-2-paul@crapouillou.net
2023-07-14Merge tag 'amd-drm-fixes-6.5-2023-07-12' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.5-2023-07-12: amdgpu: - SMU i2c locking fix - Fix a possible deadlock in process restoration for ROCm apps - Disable PCIe lane/speed switching on Intel platforms (the platforms don't support it) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230712184009.7740-1-alexander.deucher@amd.com
2023-07-14Merge tag 'drm-intel-fixes-2023-07-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Don't preserve dpll_hw_state for slave crtc in Bigjoiner (Stanislav Lisovskiy) - Consider OA buffer boundary when zeroing out reports [perf] (Umesh Nerlige Ramappa) - Remove dead code from gen8_pte_encode (Tvrtko Ursulin) - Fix one wrong caching mode enum usage (Tvrtko Ursulin) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZK+nHLCltaxoxVw/@tursulin-desk
2023-07-13drm/ssd130x: Change pixel format used to compute the buffer sizeJavier Martinez Canillas
The commit e254b584dbc0 ("drm/ssd130x: Remove hardcoded bits-per-pixel in ssd130x_buf_alloc()") used a pixel format info rather than a hardcoded bpp to calculate the size of the buffer allocated to store the native pixels. But it wrongly used the DRM_FORMAT_C1 fourcc pixel format. That is for color-indexed frame buffer formats, while the ssd103x controllers don't support different single-channel colors nor a Color Lookup Table (CLUT). So the correct pixel format to use in this case is DRM_FORMAT_R1 instead. Since both formats use a eight pixels/byte, there is no functional change in practice by this patch. Still, the correct pixel format should be used. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230713085859.907127-1-javierm@redhat.com
generated by cgit v1.2.3 (git 2.0.4) at 2026-07-20 18:52:00 +0000