| Age | Commit message (Collapse) | Author |
|
In standalone mode the ip_discovery sysfs tree is built from a verbatim
copy of the discovery binary taken before reg_base_init() collapses the
64bit base addresses in place. Decoding as 32bit there yields interleaved
zeros. Decode base_address_64[] in that case; keep reading the already
collapsed adev->discovery.bin as-is otherwise.
Fixes: 402e04f11ff7 ("drm/amdgpu: Export ip_discovery sysfs on probe failure")
Cc: stable@vger.kernel.org
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Custom brightness curves use an 8-bit input signal. After exporting the
full PWM range to userspace, the curve normalizer still divides requests
by the physical PWM span. On panels with a nonzero minimum PWM level,
this can produce a curve input greater than 255 and send an invalid
backlight level to DC.
Scale the userspace [0..max] range to the curve's [0..255] range
instead. This retains the full advertised range and keeps the reverse
readback conversion unchanged.
Fixes: 8dbd72cb7900 ("drm/amd/display: Export full brightness range to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Akhmed Zhitaev <zhitaevakh@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
(Move to amdgpu_dm_backlight.c)
Link: https://patch.msgid.link/20260813170959.22073-1-zhitaevakh@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_userq_wait_return_fence_info() calls drm_exec_init() without
DRM_EXEC_IGNORE_DUPLICATES. When the same GEM object appears more than
once across the read/write BO handle lists submitted by userspace,
drm_exec_lock_obj() returns -EALREADY the second time it locks that
object, which aborts the fence resolution pass instead of treating the
repeat as a no-op.
Add DRM_EXEC_IGNORE_DUPLICATES so duplicate objects are silently
skipped on the second lock attempt.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_userq_wait_count_fences() calls drm_exec_init() without
DRM_EXEC_IGNORE_DUPLICATES. When the same GEM object appears more than
once across the read/write BO handle lists submitted by userspace,
drm_exec_lock_obj() returns -EALREADY the second time it locks that
object, which aborts the fence-counting pass instead of treating the
repeat as a no-op.
Add DRM_EXEC_IGNORE_DUPLICATES so duplicate objects are silently
skipped on the second lock attempt.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_userq_signal_ioctl() calls drm_exec_init() without
DRM_EXEC_IGNORE_DUPLICATES. When the same GEM object appears more than
once across the read/write BO handle lists submitted by userspace,
drm_exec_lock_obj() returns -EALREADY the second time it locks that
object, which aborts the ioctl instead of treating the repeat as a
no-op.
Add DRM_EXEC_IGNORE_DUPLICATES so duplicate objects are silently
skipped on the second lock attempt, matching the intended semantics of
locking a set of (possibly overlapping) BOs before publishing a fence
on them.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_userq_buffer_vas_mapped() checks whether all VAs
of a queue are mapped before restoring it.
So that HW won't access any invalid addresses.
Currently, this function assumes all VAs are mapped if
any VA of a queue has been mapped, which is wrong.
This commit fixes this problem by examining all VAs of
a queue and reporting false if any of them is not mapped.
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_pci_probe() calls pm_runtime_use_autosuspend(), but
amdgpu_pci_remove() does not call the matching
pm_runtime_dont_use_autosuspend().
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped and usage_count remains
unbalanced.
The documentation for pm_runtime_use_autosuspend() also notes that it
is important to undo it with pm_runtime_dont_use_autosuspend() at
driver exit time, unless runtime PM was initially enabled with
devm_pm_runtime_enable().
Add the missing pm_runtime_dont_use_autosuspend() call to the remove
path.
This issue was found by manual code inspection.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260808120934.2813010-1-lgs201920130244@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
pci_is_thunderbolt_attached() requires an upstream PCI bridge with
is_thunderbolt set from an Intel Thunderbolt VSEC. This does not cover
the affected ASM4242 USB4 PCI hierarchy:
00:02.2
\- 0f:00.0 [1b21:2421]
+- 10:01.0 [1b21:2423] -> 45:00.0 -> 46:00.0
| -> 47:00.0 -> 48:00.0 -> 49:00.0 [1002:7590]
\- 10:03.0 -> 76:00.0 [1b21:2425] USB4 Host Router
The host router is outside the GPU upstream bridge chain, leaving no
ancestor with is_thunderbolt set. PCI core propagates DEVICE_REMOVABLE
below the external-facing PCIe tunnel. Disable Runtime PM when either
pci_is_thunderbolt_attached() or dev_is_removable() is true.
Cc: stable@vger.kernel.org
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
icl_plane_disable_sel_fetch_arm() wrote SEL_FETCH_PLANE_CTL = 0 only when
crtc_state->enable_psr2_sel_fetch was set. If a plane was disabled after
selective fetch had been turned off, the guard fired early and left the
register's enable bit set in hardware.
The bit is harmless until selective fetch is re-enabled. When it is, the
hardware resumes fetching for the now-disabled plane and keeps its old DDB
range reserved.
i9xx_cursor_disable_sel_fetch_arm() has the same guard on SEL_FETCH_CUR_CTL
and is fixed the same way.
v2: Add same check for cursor also. [sashiko]
Cc: stable@vger.kernel.org
Fixes: b1f5279b5981 ("drm/i915/psr: Move plane sel fetch configuration into plane source files")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/8739
Assisted-by: GitHub-Copilot:claude-opus-4.6
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patch.msgid.link/20260818095149.2172935-1-nemesa.garg@intel.com
|
|
The verisilicon driver has a custom framebuffer address calculating
helper that the common drm_fb_dma_get_addr() can substitute.
Differences from drm_fb_dma_get_addr():
- Uses drm_format_info_min_pitch() to calculate the horizontal offset;
however the driver does not support any of the blocked formats, so
this just ends up being the same as in drm_fb_dma_get_addr():
"cpp[plane] * y"
- Uses clipped source coordinates instead of non-clipped coordinates
as in drm_fb_dma_get_addr();
For the primary plane this doesn't matter, since the primary plane
must match the output, i.e. it cannot be clipped. Also this driver
doesn't support scaling.
For the cursor plane this seems wrong, as the clipping seems to be
done by the hardware, and thus the buffer address should be unclipped.
As such, it should be fine to use the common helper and drop the custom
code.
Tested-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Fixes: 8c4ae2189125 ("drm: verisilicon: add support for cursor planes")
Link: https://patch.msgid.link/20260813065127.341349-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
The 4th argument of regmap_update_bits() expects a pre-shifted register
value instead of the field value when it's used to set a single field,
however I forgot this when writing the code setting the cursor X/Y
offset fields, thus the write operation doesn't happen at all (because
of the non-shifted values being masked by regmap_update_bits()).
Fix this problem so the cursor is correctly clipped.
The framebuffer address is also clipped so the cursor offset problem was
previously not discovered, and the framebuffer address deserves another
fix for proper cursor behavior when it's clipped.
Fixes: 8c4ae2189125 ("drm: verisilicon: add support for cursor planes")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260812154829.671777-1-zhengxingda@iscas.ac.cn
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and
cleanups, that are to a large part the result of automated testing.
On platform specific drivers, this includes SoC specific code for
xilinx, freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung,
rockchip, renesas, ixp4xx. In firmware drivers, we see a similar
picture for SCMI and qcomtee.
Aside from these, we see actual new hardware support in a few areas:
- The Apple platform gets a new driver for low power states
- Updates to Qualcomm platform drivers add several new hardware
specific features and additional SoCs.
- Amlogic SoC support for A1 and T7 is added
- The Mediatek MMSYS driver is refactored as a cleanup"
* tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (157 commits)
soc: qcom: make QCOM_PDR_MSG selectable
soc: qcom: ubwc: Fix missing include
soc: qcom: ubwc: Fix link error when QCOM_SMEM=n
media: iris: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDM 850
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Get rid of static_cpu_has() - one less API to care about testing CPU
features
- Unify the handling of CPU core types (performance, efficient, etc) by
mapping the vendor-specific types to Linux ones
- Continuation of the work of Ahmed Darwish to centralize CPUID leaf
representation
* tag 'x86_cpu_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU: Rename struct cpuid_read_output to struct cpuid_output
x86/cpu/scattered: Sort it properly
x86/cpu: Use parsed CPUID(0x1)
x86/lib: Add CPUID(0x1) family and model calculation
x86/cpu: Use parsed CPUID(0x0)
x86/cpu/transmeta: Rescan CPUID(0x1) after modifying capabilities
x86/topology: Add TOPO_CPU_TYPE_LOW_POWER
x86/topology: Name the AMD core-type values
x86/topo: Map vendor CPU types to generic Linux such types
x86/bugs: Don't use cpu-type matching in cpu_vuln_blacklist
x86/cpu: Hide and rename static_cpu_has()
|
|
NVAC (MCP79/MCP7A) uses g94_pci_func, whose .msi_rearm is
nv40_pci_msi_rearm(): a re-arm write through the MMIO mirror of PCI
config space. On this IGP that path is unreliable; when a re-arm is
missed the interrupt line stays dead, command submission times out and
the GPU appears hung until reboot. On an Apple Mac mini (early 2009,
MCP79, boot0 0x0ac080b1) this showed as sporadic fifo timeouts and GPU
hangs under load unless MSI was disabled via config=NvMSI=0.
Give NVAC its own pci func that re-arms through real PCI config space
(nv46_pci_msi_rearm) instead. This follows existing precedent: nv46.c
documents the MMIO-mirror re-arm as broken on several related parts,
and commit 5112abc6a433 ("drm/nouveau/pci/g92: Fix rearm") fixed g92
the same way while moving the remaining chipsets, NVAC included, into
the newly added shared g94 table, where NVAC stayed on the MMIO path.
This change completes that fix for NVAC. The sibling IGP NVAA
(MCP77/MCP78) has MSI disabled entirely as "reported broken" in
nvkm_pci_new_(); NVAC works correctly once the re-arm goes through
config space, so disabling MSI is not necessary.
Only NVAC is switched: that is the hardware this has been validated
on. The other users of g94_pci_func (G94/G96/G98/GT2xx and the
MCP77/MCP89 IGPs) keep their current behavior; MCP77 and MCP89
plausibly want the same treatment but were not tested.
Tested on the Mac mini as a daily driver for two months with MSI
enabled and zero fifo timeouts. Independently confirmed stable on an
iMac9,1 (MCP79) running 6.12.90 with the v1 form of this change (the
same one-line functional switch, applied to that kernel's g94
implementation).
Fixes: 5112abc6a433 ("drm/nouveau/pci/g92: Fix rearm")
Cc: <stable@vger.kernel.org> # v6.16+
Tested-by: Fab Stz <fabstz-it@yahoo.fr>
Assisted-by: Claude:claude-opus-4-7
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Marek Czernohous <marek@czernohous.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/178688574401.522643.12812428444459119913@gmail.com
|
|
The SVM fault handler nouveau_svm_fault() looks up each fault's
nouveau_svmm under svm->mutex, caches it in the fault array, then drops
svm->mutex and dereferences the svmm across blocking faults
(mmu_interval_notifier_insert(), hmm_range_fault()).
nouveau_svmm is not refcounted. On DRM file close nouveau_svmm_fini() ->
mmu_notifier_put() frees it asynchronously via call_srcu() without
waiting for the handler, and mmget_not_zero() pins the mm, not the svmm.
flush_work() on the fault buffer otherwise runs only at device removal
and suspend, never on close, so a fault handled concurrently with a close
can dereference a freed svmm.
The instance is already unlinked by nouveau_svmm_part() earlier in the
same close, so no new fault can resolve to it. Drain the handler in
nouveau_svmm_fini() before the free, guarding the flush with a NULL check
on drm->svm: on device teardown nouveau_svm_fini() runs first and frees
drm->svm (NULL) after blocking the notify and flushing the buffer, so the
handler is already drained; on per-client close drm->svm is alive and the
flush runs.
Fixes: eeaf06ac1a55 ("drm/nouveau/svm: initial support for shared virtual memory")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260814-nouveau-svm-svmm-uaf-v2-1-8e6590519f07@gmail.com
|
|
nouveau_abi16_ioctl_notifierobj_alloc() passes the userspace-controlled
info->size to nvkm_mm_head() as both size_max and size_min without a lower
bound. A zero size satisfies the allocator's "e - s < size_min" gate
(size_min == 0 makes the unsigned comparison inert) and yields a
zero-length node, after which
args.limit = ntfy->node->offset + ntfy->node->length - 1;
underflows (offset 0, length 0 -> 0xffffffff) into an oversized ~4 GiB DMA
window. The dma object constructor only rejects start > limit, so the
validly ordered [base, base + 0xffffffff] range passes and is programmed
into the GPU DMA context. The ioctl is DRM_RENDER_ALLOW, so any render
node client can trigger this on pre-Fermi hardware.
Reject a zero-size request before allocating anything.
Fixes: ebb945a94bba ("drm/nouveau: port all engines to new engine module format")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: Claude:claude-opus-5
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260813-nouveau-abi16-notifierobj-zero-size-v1-1-20dee38077cb@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Warn when using 'bindgen' < 0.72.1 with 'libclang' >= 22, since
that combination may fail to build. It includes a probe for the bug
in case 'bindgen' happens to be patched, and tests
In parallel, Nathan updated the instructions for the kernel.org
LLVM+Rust toolchains so that the latest version of 'bindgen' is
installed, which should avoid some of these situations
- Support testing 'rust_is_available.sh' with 'bash' as '/bin/sh'
- Fix an objtool warning by adding one more 'noreturn' function for
Rust 1.99.0 (expected 2026-10-01)
- Fix build error in the 'rusttest' target due to ambiguity when the
'rustc-dev' component is installed, which was uncovered by the work
to support Rust's GCC backend ('rustc_codegen_gcc')
- Fix future Clang warnings in the upcoming powerpc support due to
macro redefinitions in the UAPI helper header by including the
arch-aware 'ioctl.h' header
'kernel' crate:
- Rework module ownership support:
- Move the module-related types into a new 'module' module and
make the 'THIS_MODULE' pointer a constant of 'ModuleMetadata'
so that modules can provide the pointer in const contexts, and
add a 'this_module' 'const fn' to retrieve it
This was enabled by upstream Rust's work on the 'const_mut_refs'
and 'const_refs_to_static' features which were stabilized back
in Rust 1.83.0
- Teach '#[vtable]' to associate implementations with their
owning module, defaulting to the local one, including fallbacks
for doctests, uses within the 'kernel' crate (like upcoming
KUnit '#[test]'s for DRM) and 'rusttest'
- Set 'fops.owner' from the module pointer for DRM and
miscdevice
- Migrate Rust Binder and configfs away from the old
'THIS_MODULE' 'static' and finally remove it from the 'module!'
macro
- 'num' module:
- Add the new 'casts' module for lossless integer conversions
Rust's 'core' library's 'From' implementations do not cover
conversions that are not portable or future-proof. However, the
kernel supports a narrower set of architectures, which makes it
helpful to provide more infallible conversions, instead of
having developers use 'as' casts, which carry the risk of
silently losing data
This goes along with previous work we did to avoid casts in
Rust kernel code since they are more powerful than needed
Thus, provide safe 'const' conversion functions (e.g.
'usize_as_u64' and 'u64_into_u8'), as well as the
'FromSafeCast' and 'IntoSafeCast' extension traits that provide
conversions that are known to be lossless in the kernel, and an
'arch' submodule defining conversions that are known to be
lossless on particular architectures (e.g. 64-bit platforms).
For instance:
// Conversion in const context.
const USIZED_CONST: usize = u8_as_usize(255u8);
// Non-const conversions.
let a = u64::from_safe_cast(4096usize);
let b: u64 = 4096usize.into_safe_cast();
- Add 'Bounded::shr_exact' method in the vein of 'try_shrink'
which shifts a bounded right only if it loses no set bits
- Fix unsoundness issue in the 'Bounded::shr' method by
rejecting, at compile-time, shifts of at least the type's bit
width
- 'fmt' module:
- Route '{:p}' raw pointer formatting through the kernel's hashed
'%p' format to prevent address leaks, including support for
width and padding. Include tests for both 'no_hash_pointers'
case and the default (hashed) one
- Fix the '{:p}' forwarding implementation, which could print the
address of a temporary stack variable
- 'time' module:
- Make 'Delta' generic over its time unit, with a default unit of
nanoseconds ('Nsec'), preserving the existing behavior. Then,
add a 'Jiffy' time unit
- Add the 'Delta::as_millis_ceil()' method
- Fix 'as_micros_ceil()' rounding near 'i64::MAX', which could
yield a result one microsecond too small
- 'sync' module:
- Implement 'ForeignOwnable' for 'ARef<T>', allowing C code to
own an 'ARef<T>'
- Add a safe abstraction for 'rcu_barrier()'
- 'error' module: add all of the remaining error codes, except the
deprecated compatibility aliases
- 'bug' module:
- Fix build error on UML in 'warn_on!' for callers from within
the 'kernel' crate
- Fix future 'dead_code' warning on arm and loongarch64 and under
'CONFIG_BUG=n' in 'warn_on!', which would trigger with the
upcoming SRCU abstractions
- Fix future build error in 'rusttest' on cross-compilation
cases, which would trigger when 'warn_on!' has callers inside
the 'kernel' crate
- 'bitfield' module: fix build error for the upcoming support for
Rust's GCC backend ('rustc_codegen_gcc') by always inlining a
couple conversions used in tests
'pin-init' crate:
- User-visible changes:
- Merge the '__pinned_init' and '__init' methods and make 'Init'
a marker trait
- Introduce public APIs 'raw_init' and 'raw_try_init' to prevent
users from needing to invoke the internal '__pinned_init' and
'__init' methods
- Emit errors for duplicate '#[pin]' attributes
- Link 'Zeroable::zeroed' and 'pin_init::zeroed' in documentation
- Other changes:
- Fix unwind safety issues
- Clean up lint 'allow' and 'expect's
- Overhaul '#[cfg]' handling to pave the way for tuple structs
and self-referential structs
- Mark many functions as '#[inline]' for better codegen with '-C
opt-level=s' ('CC_OPTIMIZE_FOR_SIZE')
'MAINTAINERS':
- Update 'MODULE SUPPORT' to cover the new 'module' module
And some other fixes, cleanups and improvements"
* tag 'rust-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (54 commits)
rust: add functions and traits for lossless integer conversions
rust: kernel: add `LocalModule` fallback for `#[vtable]` `impl`s
rust: fmt: route {:p} through HashedPtr to prevent address leaks
rust: fmt: fix {:p} printing stack addresses
rust: module: update MAINTAINERS to cover module.rs
rust: macros: remove `THIS_MODULE` static from `module!`
rust_binder: use `LocalModule` for `THIS_MODULE`
rust: configfs: use `LocalModule` for `THIS_MODULE`
rust: miscdevice: set fops.owner from driver module pointer
rust: drm: set fops.owner from driver module pointer
rust: macros: auto-insert OwnerModule in #[vtable]
rust: doctest: add LocalModule fallback for #[vtable] ThisModule
rust: module: add `THIS_MODULE` const to `ModuleMetadata` trait
rust: module: move module types into `module.rs`
rust: num: add Bounded::shr_exact
rust: num: reject Bounded::shr overshifts at build time
rust: num: use const_assert! in Bounded
rust: uapi: replace direct asm-generic/ioctl.h include with linux/ioctl.h
rust: time: add Delta::as_millis_ceil()
rust: time: add jiffies time unit for Delta
...
|
|
drm_sched_entity_is_idle() contains a badly documented memory barrier
and an invalid lockless access to entity->stopped. Moreover, it also
accesses entity->list which is at all other places protected by
entity->lock.
This function is in no way performance critical, so it is safer, more
readable and more maintainable to take the spinlock.
Add locking to drm_sched_entity_is_idle().
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260813094539.2407911-2-phasta@kernel.org
|
|
QCOM_UBWC_CONFIG is about to depend on QCOM_SMEM. Guard the DRM_MSM
select with 'if ARCH_QCOM && QCOM_SMEM', and add
'depends on QCOM_SMEM || QCOM_SMEM=n' so a built-in driver is never
selected against a missing or modular SMEM.
Fixes: 1b445022d1d0 ("soc: qcom: ubwc: Get HBB from SMEM")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This is supposed to print the error code but there is a copy and
paste bug so it prints "bo" instead of "err".
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://patch.msgid.link/an1tu0z3T-qX1ogn@stanley.mountain
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 28a4198c52a1468fc1b620a9837557ea1dc1766d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Follow up on the previous devm_drm_bridge_add() conversion by
converting the remaining manual cleanup in chipone-icn6211 to the
managed helper.
Suggested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260521212529.151493-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
As it turns out, Turing isn't the only architecture that needs this. On
this Dell Precision 7780 with an AD103 GPU, along with pretty much every
other laptop I tested, runtime PM is still somewhat unreliable. At first
glance it seems as if it's fixed, but lowering the autosuspend delay to
500ms and then doing a stress test of suspend/resume cycles on the GPU ends
up causing everything to start timing out.
After quite a lot of digging, I eventually landed back on this magic
timeout in r535_gsp_fini(). As it turns out, increasing the timeout ends up
fixing the runtime PM issues as far as I can tell, even during intense
stress testing.
Unfortunately after spending quite a bit of time trying to dig through
OpenRM to figure out what this magic sleep is actually doing, I've also
come up short with any reasonable explanation. In lieu of that, I'm going
to include the observations I did make while trying to figure this out in
hopes someone eventually does figure this out:
* The magic sleep has to occur after fbsr is initialized. Performing it at
any time before that doesn't appear to work.
* In situations where runtime PM starts getting flaky, some rather
interesting visual effects end up happening on occasion before the GPU
fully falls over. In particular, squares that look like the result of an
incomplete blitting operation to a tiled buffer end up showing up on
applications like vkcube. Interestingly enough, they remain in precisely
the same place between runtime PM cycles until the GPU falls over - even
when restarting vkcube multiple times, and even when vkcube is actively
updating the screen. Even more interestingly, they're not limited to a
specific framebuffer - you can see the squares changing as the cube
rotates around.
We cannot however, say that this is likely to be a incomplete fbsr
operation. The magic sleep happens before fbsr is actually saved (which
happens on the GSP unload), so it's something else.
* During a short bit of testing with a desktop that I have, the magic sleep
seemed to make no difference to whether or not suspend/resume works. It
seems to generally work almost always. So we can assume this is likely
exclusive to runtime PM, not S3.
As well, here's a list of the things I tried before settling on the magic
sleep:
* Hooking up NV2080_CTRL_CMD_INTERNAL_GCX_ENTRY_PREREQUISITE and then
blocking runtime PM until OpenRM signals that GC6/GCOFF is ready appears
to make no difference.
* Hooking up some (maybe not all, unsure about that part) bits of comptag
saving including:
* Fetching static memsys information from GSP
* Adding the size of the comptag storage to the fbsr data
* Adding a GA103+ workaround for disabling raw compression mode during
fbsr (it doesn't seem like it applies for any systems I tried it on
anyhow)
* Setting bPreserveVideoMemoryAllocations=1 in GspSystemInfo
So, until we can figure this out properly - just sleep for longer.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 53dac0623853 ("drm/nouveau/gsp: add support for 570.144")
Cc: <stable@vger.kernel.org> # v6.16+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260814194542.781955-5-lyude@redhat.com
|
|
There's two flags that we've never been setting when asking GSP to suspend
the GPU, which OpenRM does set:
GPU_STATE_FLAGS_PRESERVING
GPU_STATE_FLAGS_PM_TRANSITION
These flags aren't -supposed- to do much in GSP, they're mostly used by
OpenRM itself for state tracking. The only thing they do from GSP's side is
control whether or not a single display related workaround is applied
during suspend.
But as it turns out, that single workaround is actually quite crucial for
getting runtime PM working with nouveau - and without it set we end up
seeing a lot more failures with runtime PM resume. So, let's start setting
it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 53dac0623853 ("drm/nouveau/gsp: add support for 570.144")
Cc: <stable@vger.kernel.org> # v6.16+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260814194542.781955-4-lyude@redhat.com
|
|
Previously, it looked as if we were able to fix suspend/resume on some
desktops by setting Gcoff based on whether or not we were entering runtime
PM. This was a mistake though - the only time suspend/resume would end up
actually working was if Gcoff = 0.
It seems like it's likely the main reason for this is the FBSR GcOff
argument actually controls GSP's behavior with regards to which buffers it
decides to save across suspend/resume. When GcOff = 1, RM reserved regions
are saved unless they are marked as LOST_ON_SUSPEND, and RM channel-context
and kernel-client buffers are also saved -including- when they are
LOST_ON_SUSPEND. This means with GcOff = 1, we end up having GSP save and
restore buffers that actually need to be reinitialized on resume - causing
the failures we're setting.
Thanks to John Hubbard from Nvidia for providing some background on what
these options do in the GSP firmware do!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 53dac0623853 ("drm/nouveau/gsp: add support for 570.144")
Cc: <stable@vger.kernel.org> # v6.16+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260814194542.781955-3-lyude@redhat.com
|
|
This reverts commit 8302d0afeaec0bc57d951dd085e0cffe997d4d18.
It turns out this looked like the right fix on some systems, but it's not -
as this causes runtime PM to actually fail on many a laptop.
Fixes: 8302d0afeaec ("nouveau/gsp: fix suspend/resume regression on r570 firmware")
Cc: <stable@vger.kernel.org> # v6.19+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260814194542.781955-2-lyude@redhat.com
|
|
Nouveau is one of the very few modern hardware drivers in the kernel that
doesn't have atomic modesetting enabled by default, in part because when it
was originally written by Ben there wasn't much in the way of good atomic
modesetting clients to actually test things out with.
Nowadays however, atomic modesetting is very much the norm - and support in
userspace for non-atomic drivers is starting to bitrot a bit - leading to
its own set of issues. At the same time, many of those issues are fixed by
just turning on atomic in nouveau. Plus, I've been running nouveau with
atomic modesetting on by default for most of the machines I work on, and
I've already fixed quite a number of issues to the point where things seem
quite stable (excluding a single screen flashing bug on my desktop, which I
am not particularly convinced has anything to do with atomic modesetting).
Now that we've protected against breaking things for chipsets where atomic
isn't supported (<nv50) - let's enable it by default on generations of
hardware that support it. We'll leave the module parameter around for the
time being, as turning it off may be helpful in the possibility that we hit
regressions.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260813204803.2097176-6-lyude@redhat.com
|
|
Atomic modesetting support was never added for pre-nv50 chipsets, so make
sure we don't allow it to be forced on. Additionally, print a small warning
when it's not supported.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260813204803.2097176-5-lyude@redhat.com
|
|
The way we handled the nouveau.atomic module parameter before was fairly
broken, and had a number of issues:
- It was only ever actually parsed in the case of PCI devices.
- When nouveau.atomic was enabled, it would add the cap for atomic
modesetting to the global driver_pci structure. This meant that if one
GPU on a system supported atomic and another didn't, it would still get
enabled for both.
Looking into this exposed further silliness in the way that we actually
handle the drm_driver struct. We have one global structure for platform
devices, and another for PCI devices - both of which are literally
identical.
So before we start preparing to enable atomic modesetting by default, let's
fix this. Instead of sharing driver_pci and driver_platform, we instead
create driver_legacy_kms and driver_atomic_kms, each of which is identical
except for the DRIVER_ATOMIC capabilities flag, and then assign either
depending on the nouveau_atomic module parameter.
Doing this is also preferable, as the next step for enabling atomic
modesetting by default will be ensuring that we don't enable it for legacy
devices that still don't support it. This requires only checking the atomic
modesetting module parameter after the NVKM device is ready, as this allows
us to check the GPU family that nouveau is running on.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260813204803.2097176-4-lyude@redhat.com
|
|
Seems like we never remembered to start printing the value for this, so
let's start to aid in troubleshooting in case we run into any issues with
atomic.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260813204803.2097176-3-lyude@redhat.com
|
|
Sashiko caught this while reviewing the patches for enabling atomic by
default - if we fail to allocate the DRM device pointer, we'll attempt to
free the error pointer that it returns rather than the actual struct.
Let's fix this while we're at it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260813204803.2097176-2-lyude@redhat.com
|
|
Report 'cannot re-enable PCI device' error using xe_log() helper.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-34-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Report 'Queue full' error using xe_log_err() helper.
While around, replace WARN_ON with WARN_ON_ONCE as there is no
need for extra noise each time we hit this unlikely condition.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-33-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Report 'Unsuccessful response' error using xe_log_err_info() helper.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-32-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Report 'reset' related err/info messages using xe_log() helpers.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-31-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Report various 'GuC mmio' errors using xe_log() helpers.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-30-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Report 'initialization timedout' error using xe_log_err() helper.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-29-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Report 'timeout, retrying with preemption disabled' error using
xe_log_err() helper.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-28-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Report 'Mailbox failed' error using xe_log_err() helper.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-27-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Report 'device wedged' error using xe_log_err_fatal() helper.
Use -EIO as the error cause, as nothing else is provided here.
The hints about the recovery method and bug filing are now
separated as it only needs to be printed once.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-26-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Report 'Runtime Mode' status or failure using xe_log_err() helper.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-25-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Report 'Boot Mode' status or failure using various xe_log() helpers.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-24-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If we fail to create any of the survivability sysfs files, the user
can't view boot status registers any more. Report them into dmesg
instead using our existing SIGID helper.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-23-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If we fail to create any of the survivability sysfs files, actual
error is reported by the caller. Move that reporting to sysfs helper.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-22-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Report 'boot status' and other scratch registers details using
the xe_log_info() macros. While around, add helper to decode
boot status code and change pdev parameter to xe.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com> #v1
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-21-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
For completeness, we should catch and report all probe errors, not
just the ones that have explicit error message. Split xe_pci_probe()
function after a display check to avoid reporting -EPROBE_DEFER and
use xe_log_err_fatal() helper to report all returned errors.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-20-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Report 'driver loading blocked' status using xe_log_info() helper.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-19-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add simple sanity tests for all xe_any macros to make sure they
are working as expected.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-18-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
All dmesg log lines generated by the xe_log() functions or helper
macros are expected to have a stable format. Add tests to verify
that generated output is not accidentally changed. Add demo pseudo
tests to show how to use all variants of the xe_log() helpers.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-17-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
While we have helpers pdev_to_xe_device() and kdev_to_xe_device()
to obtain the xe_device pointer from the struct device pointer or
from the struct pci_dev pointer, we must also setup the drm_device
pointer as driver data in the device to make them work.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-16-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
While not strictly required, we want to make sure that components
definitions used by the RAS firmware are in the same fixed relation
with HW components definitions used by the LOG infrastructure to
allow code simplification. Add static asserts to enforce that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Link: https://patch.msgid.link/20260814171801.13347-15-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|