| Age | Commit message (Collapse) | Author |
|
CMRR is mutually exclusive to PSR2, do not enable PSR2 when CMRR is
enabled.
--v2:
- Restrict selective update config check (Ankit)
- Commit message change
--v3:
- Commit changes
--v4:
- Add check to psr2_config_valid (Jouni)
--v5:
- Correct debug message
--v6:
- Commit message update
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260730105919.3913412-2-mitulkumar.ajitkumar.golani@intel.com
|
|
dGfx vecs hwe's for media version 35.00 and later follow the same
assignment to OAM units as vcs engines.
Bspec: 77977
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260729230645.3052178-3-ashutosh.dixit@intel.com
|
|
vcs1 and vecs1 may also be present on the first media slice, so take
vcs1/vecs1 also into account when determining if the first media slice is
absent.
Bspec: 67103, 77977
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260729230645.3052178-2-ashutosh.dixit@intel.com
|
|
V3D exposes several independent hardware queues (BIN, RENDER, TFU and
CSD) but has only a single, global reset. A timeout on any one queue
therefore has to stop, reset and restart the schedulers of every other
queue as well. That makes concurrent timeout handlers unsafe.
`reset_lock` was never able to make them safe, as a driver-side lock can
only cover the driver's &drm_sched_backend_ops.timedout_job callback.
The scheduler handles the timed out job and its pending list around that
callback, outside of the driver's control, so a global reset triggered
by one queue can still interfere with another queue that is in the
middle of handling a timeout of its own.
Consequently, if a reset happens in the CSD queue while a CL-intensive
application is running, the global reset stops and restarts the CL
queue's scheduler while that queue is handling a timeout of its own. As
drm_sched_stop() and drm_sched_start() subtract and add the credits of
every job sitting on the pending list of the scheduler they are called
on, and as the CL queue's handler concurrently takes its job off that
same list and puts it back, the stop and the start no longer see the
same set of jobs. The CL queue is left with more credits in flight than
its limit:
[ 327.302739] ------------[ cut here ]------------
[ 327.302744] WARNING: CPU: 2 PID: 43 at drivers/gpu/drm/scheduler/sched_main.c:102 drm_sched_run_job_work+0x238/0x4d0 [gpu_sched]
[ 327.302884] CPU: 2 UID: 0 PID: 43 Comm: kworker/u16:1 Not tainted 6.18.39-v8-16k+ #3 PREEMPT
[ 327.302889] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 327.302893] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched]
[ 327.302984] Call trace:
[ 327.302987] drm_sched_run_job_work+0x238/0x4d0 [gpu_sched] (P)
[ 327.302997] process_scheduled_works+0x180/0x3d0
[ 327.303010] worker_thread+0x268/0x3e8
[ 327.303016] kthread+0x140/0x250
[ 327.303022] ret_from_fork+0x10/0x20
[ 327.303031] ---[ end trace 0000000000000000 ]---
From that point on, the credit count of the CL queue is broken, causing
a complete GPU hang and UI freeze.
The DRM scheduler already provides a mechanism to serialize the timeout
handlers of different schedulers: an ordered workqueue passed as
drm_sched_init()'s @timeout_wq parameter. By default, each scheduler
queues its timeout work on the system workqueue, which runs the handlers
concurrently. Give all of the queues a shared ordered workqueue instead,
as recommended by the DRM scheduler documentation for hardware that has
distinct queues but resets globally.
Cc: stable@vger.kernel.org # 6.15
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260728-v3d-order-global-reset-v1-1-e47be838158d@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
|
|
The i2c subsystem currently blocks during adapter deregistration
whenever there are consumers holding a reference.
Switch to using of_get_i2c_adapter_by_node() which also takes a
reference to the adapter module so that an attempt to unload the module
while in use fails gracefully instead of blocking uninterruptibly.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Not handling the return code on drm_encoder_init can lead to silent
failure and/or a drm_encoder_cleanup on a non-initialized encoder.
This patch adds error handling to the drm_encoder_init calls to prevent
that from happening.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Simple KMS helper are deprecated since they only add an intermediate
layer between drivers and the atomic modesetting.
This patch removes the dependency on drm simple helpers from exynos
DRM drivers.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Dropped unnecessary blank line and reorder header definition.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
- Wait on external BO kernel fences in exec IOCTL (Brost)
- General clean-up (Anas)
- Documentation fix (Rafael)
- Add a debugfs for pcode information (Karthik)
- Free madvise VMA array on L2 flush failure (Guangshuo)
- Page Table related fixes (Shuicheng, Zongyao)
- Improvements GuC error handling and GuC small fixes (Sk, Zhanjun, Arvind)
- Add new W/As (Daniele, Harish)
- GuC paging engine support (Auld)
- Add and use more KLV helpers (Michal)
- Balance exec queue suspend/resume (Niranjana, Thomas)
- Fix BO prefetch with CONSULT_MEM_ADVISE_PREF_LOC (Himal)
- SRIOV: Disable display in admin only PF mode (Satya)
- Fix writable override for CRI NVM (Sasha)
- Fix VF CCS attach/detach race with in-flight BO moves (Brost)
- Introduce Xe Uncorrectable Error Handling (Riana)
- Fix WOPCM size for LNL+ (Daniele)
- Consolidate debugfs fault injection functions (Mallesh)
- Multi-queue related fixes and improvements (Niranjana, Jagmeet, Shuicheng)
- Add RAS GPU health indicator (Soham)
- PAT related improvements (Roper, Sanjay)
- NULL deref fix on migration on VF (Satya)
- i2c related fix (Raag)
- Fix SVM leak and clean up xe_vm_create (Shuicheng)
- Drop force_probe requirement for NVL-s (Gustavo)
- Optimise TT population for DONTNEED BOs (Auld)
- Add page size allocation mode control and coverage (Himal, Nareshkumar)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/amt2kDVdyBK6VEyU@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull #2 for v7.3:
Features and functionality:
- Enable UHBR link rates on Thunderbolt tunneled links (Imre)
- Reduce Xe3+ PM demand peak bandwidth for power savings (Vinod)
- Add the blend mode property to all planes that support alpha blending (Chaitanya)
- Enable pipe DMC error interrupts for display 30+ (Dibin)
- Add KUnit tests for DP link config selection and fallback (Imre)
Refactoring and cleanups:
- Refactor DP link config selection and unify across use cases (Imre)
- Unify i915 and xe display runtime PM calls (Jani)
- Refactor BIOS framebuffer takeover (Ville)
Fixes:
- Fix HD audio on DP UHBR SST (Kai Vehmanen)
- Fixes to xe driver BIOS framebuffer takeover (Ville)
- Fix 2 pixels-per-clock CDCLK calculation to avoid underruns (Ville)
- Fix incorrectly set VSC SDP Main Stream Attribute (Chaitanya)
- Fix BPC and DSC selection for HDMI sinks (Alexander Kaplan)
- Fix PCON max FRL rate selection (Alexander Kaplan)
- Workaround Xe3P PSR2 screen corruption (Dibin)
- Fix NVL A & B stepping vtotal setting (Suraj)
- Fix xe DPT allocation paths (Maarten)
- Prefer system memory instead of stolen for new framebuffers in xe (Maarten)
- Fix transcoder mask sizes (John Harrison)
- Clear stale UV/Y plane DDB entries on plane disable (Vinod)
- Fix some DP AUX backlight control issues, again (Suraj)
- Fix switching between HDCP 1.4 and 2.2 authentication (Suraj)
- Remove unnecessary Xe2_LPD+ FBC plane width and surface size limits (Vinod)
- Ensure non-zero DSB safe window for PTL+ (Ankit)
- Fix bandwidth calculation to account for 16 DRAM channels (Uma)
- Fix NV12 ceiling division for bigjoiner case (Vidya)
DRM core changes:
- Add Thunderbolt UHBR tunneling support (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/cb1b5a644d75589cbcdcc8ec8160968140426439@intel.com
|
|
On ARM32 with CONFIG_ARM_DMA_USE_IOMMU, arch_setup_dma_ops() creates a
dma_iommu_mapping for every IOMMU-backed device and attaches its domain
to the device's IOMMU group. That domain is neither the group's default
nor its blocking domain, so when msm_iommu_new() later attaches the
domain the driver manages itself, __iommu_attach_group() refuses it:
if (group->domain && group->domain != group->default_domain &&
group->domain != group->blocking_domain)
return -EBUSY;
Both the GPU and the display controller are hit by this on apq8064
(IFC6410), leaving the board with no GPU and no display:
adreno 4300000.gpu: failed to load adreno gpu
adreno 4300000.gpu: probe with driver adreno failed with error -16
mdp4 5100000.display-controller: [drm:msm_drm_kms_init] *ERROR* failed to load kms
mdp4 5100000.display-controller: adev bind failed: -16
Other ARM32 DRM drivers that manage their own domains (tegra, rockchip,
exynos) drop the arch mapping first. Do the same in msm_iommu_new(),
which both the display and the GPU paths go through.
With this the GPU and the KMS device both initialise:
[drm] Initialized msm 1.13.0 for 4300000.gpu on minor 0
[drm] Initialized msm-kms 1.13.0 for 5100000.display-controller on minor 1
Assisted-by: Claude:claude-opus-5
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/743333/
Link: https://lore.kernel.org/r/20260730-fix-qcom-smmu-v2-3-18e0daf2d836@oss.qualcomm.com
|
|
dev_pm_opp_set_rate(0) removes the vote specified in required-opps but
does not actually park the clock, making it run without the necessary
power backing. Drop the explicit call to it.
Every call site of ops->link_clk_disable() is followed by
pm_runtime_put(), so the power vote will be rescinded if deemed safe.
Fixes: 32d3e0feccfe ("drm/msm: dsi: Use OPP API to set clk/perf state")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742783/
Link: https://lore.kernel.org/r/20260728-topic-dpu_power-v1-3-e7783b859a70@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
dev_pm_opp_set_rate(0) removes the vote specified in required-opps but
does not actually park the clock, making it run without the necessary
power backing. Drop the explicit calls to it.
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742781/
Link: https://lore.kernel.org/r/20260728-topic-dpu_power-v1-2-e7783b859a70@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
dev_pm_opp_set_rate(0) removes the vote specified in required-opps but
does not actually park the clock, making it run without the necessary
power backing. Prevent that from happening when
_dpu_core_perf_get_core_clk_rate() returns 0.
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742779/
Link: https://lore.kernel.org/r/20260728-topic-dpu_power-v1-1-e7783b859a70@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Pass struct msm_dp_panel to the display enable/disable helpers to make
them easier to reuse for MST stream handling.
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742752/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-14-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
dp_bridge helpers take drm_bridge as an input and extract the
dp_display object to be used in the dp_display module. Rather than
doing it in a roundabout way, directly pass the dp_display object
to these helpers so that the MST bridge can also re-use the same
helpers.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742750/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-13-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Move the common disable steps out of the sink_count check to make the
flow easier to follow.
No functional change intended.
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742749/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-12-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Split dp_ctrl_off() into stream and link parts so that for MST
cases we can control the link and pixel parts separately.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742746/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-11-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
With MST, multiple sinks share a single DP controller, so a cached
panel in msm_dp_ctrl_private can no longer represent the per-stream
sink. Drop the cache and pass panel explicitly to all stream-related
dp_ctrl APIs.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742745/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-10-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
dp_display_disable() handles special case of when monitor is
disconnected from the dongle while the dongle stays connected
thereby needing a separate function dp_ctrl_off_link_stream()
for this. However with a slight rework this can still be handled
by keeping common paths same for regular and special case.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742742/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-9-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
dp_display_enable() currently re-trains the link if needed and then
enables the pixel clock, programs the controller to start sending the
pixel stream. Split these two parts into prepare/enable APIs, to support
MST bridges_enable insert the MST payloads funcs between enable
stream_clks and program register.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742740/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-8-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Enable/Disable of DP pixel clock happens in multiple code paths
leading to code duplication. Move it into individual helpers so that
the helpers can be called wherever necessary.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742738/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-7-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
msm_dp_ctrl_configure_source_params() should only handle stream-related
configuration. Move the link setup out of it so MST can program link and
stream settings separately.
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742737/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-6-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Refactor the MISC1_MISC0 register configuration into a standalone helper
function to support MST.
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742735/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-5-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The DP_CONFIGURATION_CTRL register contains both link-level and
stream-specific fields. Currently, msm_dp_ctrl_config_ctrl() configures
all of them together. Separate the configuration into link parts and
stream parts to support MST. Clear the stream-specific fields before
OR-ing new values in the stream path to avoid bit accumulation across
repeated calls.
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742733/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-4-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The display layer directly assigns msm_dp_panel mode fields (bpp,
sync polarity, yuv420 flag) instead of letting the panel manage its
own state. Pass adjusted_mode and bpp as parameters to
msm_dp_panel_init_panel_info() and move the assignments inside it.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742731/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-3-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The bridge .mode_set() callback is deprecated. Remove it and move the
mode setup logic to .atomic_pre_enable(), where the adjusted_mode is
available from the atomic CRTC state.
.atomic_pre_enable() is used rather than .atomic_enable() because the DPU
encoder's .atomic_enable() reads the output mode's YUV420 / wide bus
state through the msm_display callbacks, and it runs after all bridges'
.atomic_pre_enable() but before their .atomic_enable(). Programming the
mode from the DP bridge's .atomic_enable() would leave the encoder
reading the previously committed mode's state.
Drop msm_dp_mode from msm_dp_display_private and store the mode directly
in the panel, as it was only used as a temporary cache.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Assisted-by: Claude:claude-opus-4-8
[DB: moved to atomic_pre_enable]
Patchwork: https://patchwork.freedesktop.org/patch/742729/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-2-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The cached drm_edid seems unnecessary here. Use the drm_edid pointer
directly in the plug stage instead of caching it. Remove the cached
drm_edid and the corresponding oneliner to simplify the code.
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742727/
Link: https://lore.kernel.org/r/20260728-dp_mstclean-v9-1-f7779fce10f4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
msm_dp_bridge_mode_valid() halves the candidate mode's pixel clock when
the sink either uses YUV 420 output or drives the wide bus, so that modes
relying on those to stay under DP_MAX_PIXEL_CLK_KHZ are accepted. The
wide bus part is queried through msm_dp_wide_bus_available(), which
returns false whenever the currently committed mode uses YUV 420 output:
it inspects the stored msm_dp_mode.out_fmt_is_yuv_420 of the active mode,
not the mode being validated.
Consequently, while a YUV 420 mode is active, an RGB mode that needs the
wide bus to fit under DP_MAX_PIXEL_CLK_KHZ has its pixel clock left
un-halved and is wrongly rejected as MODE_CLOCK_HIGH.
The candidate mode's YUV 420 status is already evaluated as is_yuv_420,
and the wide bus is disabled precisely for YUV 420 output, so halving the
pixel clock for either case is equivalent to halving it when the
candidate is YUV 420 or the controller supports the wide bus. Test
wide_bus_supported directly, so the decision no longer depends on the
format of the active mode.
Fixes: df9cf852ca30 ("drm/msm/dp: account for widebus and yuv420 during mode validation")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/741740/
Link: https://lore.kernel.org/r/20260722-drm-msm-display-interface-v1-15-368c10fe62fd@oss.qualcomm.com
|
|
DP conveys YUV 420 colorimetry through a VSC SDP. A sink that advertises
a mode as YUV-420-only therefore cannot be driven at all unless the panel
supports VSC SDP, yet msm_dp_bridge_mode_valid() only used the VSC SDP
capability to decide whether to halve the pixel clock, otherwise letting
such modes through to be validated (and possibly accepted) at the full
RGB clock the sink cannot display.
Reject 420-only modes with MODE_NO_420 when the panel does not support
VSC SDP. With those modes filtered out, being a 420-only mode implies VSC
SDP support, so the YUV-420 test reduces to drm_mode_is_420_only(): drop
msm_dp_is_yuv_420_enabled() and call the DRM helper directly at its two
callers (the DPU encoder already has the connector from the atomic state).
Fixes: df9cf852ca30 ("drm/msm/dp: account for widebus and yuv420 during mode validation")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/741713/
Link: https://lore.kernel.org/r/20260722-drm-msm-display-interface-v1-1-368c10fe62fd@oss.qualcomm.com
|
|
When priv->kms_init() (mdp4_kms_init() / mdp5_kms_init()) fails partway
through, both display drivers already tear their KMS state down via
mdp4_destroy() / mdp5_kms_destroy() before returning the error. The
common error path in msm_drm_init() then runs msm_drm_uninit() ->
msm_drm_kms_uninit(), which tries to destroy the very same KMS a second
time, which causes a use-after-free crash.
Bring MDP4/MDP5 in line with the DPU driver whose dpu_kms_init() doesn't
perform error cleanup on the failure. Let the common path own the
cleanup, instead of freeing the KMS from their error paths.
The crash trace for the reference:
__lock_acquire from lock_acquire (kernel/locking/lockdep.c:5906 kernel/locking/lockdep.c:5863)
lock_acquire from touch_wq_lockdep_map (kernel/workqueue.c:4094 (discriminator 1))
touch_wq_lockdep_map from __flush_workqueue (kernel/workqueue.c:4136)
__flush_workqueue from msm_drm_kms_uninit (drivers/gpu/drm/msm/msm_kms.c:243 (discriminator 33))
msm_drm_kms_uninit from msm_drm_uninit (drivers/gpu/drm/msm/msm_drv.c:93)
msm_drm_uninit from msm_drm_init (drivers/gpu/drm/msm/msm_drv.c:184)
msm_drm_init from try_to_bring_up_aggregate_device (drivers/base/component.c:249 drivers/base/component.c:227)
try_to_bring_up_aggregate_device from __component_add (drivers/base/component.c:269 drivers/base/component.c:748)
__component_add from dsi_host_attach (drivers/gpu/drm/msm/dsi/dsi_host.c:1739)
dsi_host_attach from mipi_dsi_attach (drivers/gpu/drm/drm_mipi_dsi.c:383)
mipi_dsi_attach from sharp_nt_panel_probe (drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c:247)
Fixes: 506efcba3129 ("drm/msm: carve out KMS code from msm_drv.c")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/742068/
Link: https://lore.kernel.org/r/20260723-msm-fix-crash-v1-1-78fb4721c2d9@oss.qualcomm.com
|
|
On DPU v13, the DMA SSPP REC0 and REC1 blocks are located at
offsets 0x1000 and 0x3000 from the SSPP common base.
The existing DMA SSPP sub-block descriptor does not initialize
sspp_rec0_blk and sspp_rec1_blk, causing REC register accesses
to be performed at offset 0 instead of the corresponding REC
block. As a result, DMA SSPP pipes are not programmed correctly
and fail to produce output.
Introduce a DPU v13 specific DMA SSPP descriptor with the correct
REC block offsets and use it for all DMA SSPPs in the Kaanapali
catalog.
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Fixes: 83fe2cd56b1d ("drm/msm/dpu: Add support for Kaanapali DPU")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/741230/
Link: https://lore.kernel.org/r/20260720-dpu-v13-dma-sspp-rec-fix-v1-1-10d69b4875e7@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Simplify reister updates (read, apply mask, write) with a wrapper to
make code more obvious and avoid possible errors of reading and writing
to different registers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/737203/
Link: https://lore.kernel.org/r/20260702-drm-msm-hdmi-cleanup-v2-2-a4a4f0e8895b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Simplify reister updates (read, apply mask, write) with a wrapper to
make code more obvious and avoid possible errors of reading and writing
to different registers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/737201/
Link: https://lore.kernel.org/r/20260702-drm-msm-hdmi-cleanup-v2-1-a4a4f0e8895b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The only caller of msm_framebuffer_init() is msm_framebuffer_create()
from the same source file. Declare the former as static.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/733889/
Link: https://lore.kernel.org/r/20260618141249.151338-7-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Replace the internal DRM framebuffer with a DRM client buffer. The
client buffer allocates the DRM framebuffer on a file and also uses
GEM object handles via the regular ADDFB2 interfaces.
Using client-buffer interfaces unifies framebuffer allocation for
DRM clients in user space and msm's internal fbdev emulation. It
also simplifies the clean-up side of the fbdev emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/733891/
Link: https://lore.kernel.org/r/20260618141249.151338-6-tzimmermann@suse.de
[DB: fixed error handling in msm_fbdev_driver_fbdev_probe]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Replace the geometry and size calculation in msm's fbdev emulation
with DRM format helpers. This consists of a 4CC lookup from the fbdev
parameters, format lookup, pitch calculation and size calculation.
Then allocate the GEM buffer object for the framebuffer memory from
the calculated size.
Explicitly align the size of the allocated GEM buffer object to full
pages. The contained memory is the framebuffer memory as seen by fbdev.
The page alignment is required for mmap.
v2:
- clarify the page alignment of the buffer size (Dmitry)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/733885/
Link: https://lore.kernel.org/r/20260618141249.151338-5-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Replace deprecated error reporting in msm_fbdev_driver_fbdev_probe().
Use drm_warn() and drm_err() instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/733887/
Link: https://lore.kernel.org/r/20260618141249.151338-4-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Inline msm_alloc_stolen_fb() into its only caller. This is necessary
for converting fbdev emulation to use client buffers.
There are some minor changes:
- Handle errors for the non-stolen BO in the respective branch.
- Fill mode_cmd right before using it with msm_framebuffer_init(). Both
will later be replaced with client-buffer interfaces.
- Set the modifier[0] to DRM_FORMAT_MOD_LINEAR. No functional change.
- Integrate the error handling with the existing clean-up.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/733884/
Link: https://lore.kernel.org/r/20260618141249.151338-3-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Declare msm_framebuffer_init() in msm_drv.h and remove the static
qualifier. The function will be required in msm_fbdev.c after inlining
msm_alloc_stolen_fb().
Also move msm_framebuffer_init() before msm_framebuffer_create(), so
that it can later be made static again. Prepares msm's fbdev emulation
for using client buffers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/733883/
Link: https://lore.kernel.org/r/20260618141249.151338-2-tzimmermann@suse.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
PipeWire treats a non-zero return from prepare as fatal, marking the
DP audio device as a dummy sink when the cable is unplugged. The
active_stream_cnt guard already prevents any unclocked hardware access,
so return success instead of -EINVAL when the link is not active.
Signed-off-by: Kumar Anurag <kumar.singh@oss.qualcomm.com>
Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> # same behaviour
Patchwork: https://patchwork.freedesktop.org/patch/733663/
Link: https://lore.kernel.org/r/20260616151252.3599089-2-kumar.singh@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add a firmware module to load, parse, and map the MCU firmware sections
into shared GEM memory at the required virtual addresses accessible by the
GPU.
Create a firmware instance during probe and store it inside the
TyrDrmRegistrationData to keep it alive after probe. Use the firmware
instance to boot the MCU.
Remove the dead-code annotations from the MMU, VM, slot manager, and
kernel BO code now that these paths are used by the firmware module.
Update Kconfig to add the RUST_FW_LOADER_ABSTRACTIONS dependency
required by this module.
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260728-fw-boot-b4-v10-7-9187aefa3f2f@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Add a parser for the Mali CSF GPU firmware binary format. The firmware
consists of a header followed by entries describing how to load firmware
sections into the MCU's memory.
The parser extracts section metadata including virtual address ranges,
data byte offsets within the binary, and section flags controlling
permissions and cache modes. It validates the basic firmware structure
and alignment and ignores protected-mode sections for now.
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Co-developed-by: Beata Michalska <beata.michalska@arm.com>
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Co-developed-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260728-fw-boot-b4-v10-6-9187aefa3f2f@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Introduce a buffer object type (KernelBo) for internal driver allocations
that are managed by the kernel rather than userspace.
KernelBo wraps a GEM shmem object and automatically handles GPU virtual
address space mapping during creation and unmapping on drop. This provides
a safe and convenient way for the driver to both allocate and clean up
internal buffers for kernel-managed resources.
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260728-fw-boot-b4-v10-5-9187aefa3f2f@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Add GPU virtual address space management using the DRM GPUVM framework.
Each virtual memory (VM) space is backed by ARM64 LPAE Stage 1 page tables
and can be mapped into hardware address space (AS) slots for GPU execution.
The implementation provides memory isolation and virtual address
allocation. VMs support mapping GEM buffer objects with configurable
protection flags (readonly, noexec, uncached) and handle both 4KB and 2MB
page sizes. A new_dummy_object() helper is provided to create a dummy GEM
object for use as a GPUVM root.
The vm module integrates with the MMU for address space activation and
provides map/unmap/remap operations with page table synchronization.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Co-developed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Co-developed-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260728-fw-boot-b4-v10-4-9187aefa3f2f@collabora.com
[aliceryhl: fix integer cast on 32-bit arm]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Reorder the fields of struct pvr_device_features so they match the order
of the device info enum found in pvr_rogue_fwif_dev_info.h.
Signed-off-by: Alexandru Dadu <alexandru.dadu@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260729-b4-pvr-device-features-members-reorder-v1-1-d2e18ed8cd5f@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
|
|
Firmware schedules workloads on the GPU and tracks progress.
It is also responsible for detecting any lockup and triggering recovery.
Update the GPU scheduler timeout to a reasonably high value to avoid
premature timeout at the GPU scheduler end.
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260729-sched_timeout-v1-1-4adc801b1997@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
|
|
panthor_init_cs_iface() and panthor_init_csg_iface() validate firmware
control interface offsets with 32-bit arithmetic and the size of the host
wrapper structures. The offsets are derived from firmware-provided strides,
so the arithmetic can wrap before the bounds check, and the host wrapper
size is not the size of the firmware control interface being mapped.
Use 64-bit arithmetic for the computed offsets and validate against the
actual firmware control interface structure sizes with subtraction-based
bounds checks. Also validate that the shared section is large enough for
the global control interface before using it.
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260720134435.13377-1-osama.abdelkader@gmail.com
Signed-off-by: Steven Price <steven.price@arm.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-7.3-2026-07-29:
amdgpu:
- VCN 5.3 fix
- UserQ fixes
- GEM close optimization
- HDMI AV mute fix
- UML build fixes
- GFXOFF residency metrics fixes
- SMU 15 fixes
- debug_vm fix
- PSP 15 fixes
- NBIO 7.11.5 fix
- pptable use after free fix
- gpu metrics fetch fix
- DC viewport fix
- DML2.1 fix
- i2c retimer spam fix
- UMD profile pstate fix
- Power metrics format cleanup
- GTT size fix on APUs
- DC context logging fix
- Misc fixes
- IB pool clean up and fixes
- DCN 4.2 updates
- Old BUG() and BUG_ON() removal
- RAS updates
- PASID management updates
- DC MCIF ARB updates
- More DC KUNIT tests
- Refactor dc_validation_set
- Introduce dc_state_get_status unified status accessor
- Apple Studio Display fixes
- DML updates
- DC writeback fixes
- MES updates
- PTL updates
- DC code restructuring
- DC FRL fixes
- Add modifiers for GFX6-8
- Resume fix for MacBookPro15,1
amdkfd:
- Various bounds checking fixes
- Mutex locking fix
- Clean up debug runlist printing
- SR-IOV fixes
- Avoid topology_lock in kfd_mmap
- Fix signal reset event
- SVM eviction fixes
radeon:
- Fix for unset CONFIG_ACPI
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260729201801.4073097-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
One DP DSC fix and one HDMI 2.0 fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/amvIvqJehP7uaUgx@intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-7.2-2026-07-30:
amdgpu:
- PM sysfs fix for APUs
- Follow on pageflip timeout fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260730150018.801791-1-alexander.deucher@amd.com
|