| Age | Commit message (Collapse) | Author |
|
Switch drm/msm client drivers over to generic PAS TZ APIs. Generic PAS
TZ service allows to support multiple TZ implementation backends like QTEE
based SCM PAS service, OP-TEE based PAS service and any further future TZ
backend service.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Tested-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> # Lemans
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260702115835.167602-9-sumit.garg@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This avoids constant need to ioremap when instobjs move at least on
64-bit systems.
This create the io mapping on first use, because creating it at init
time causes a resource mapping error, because nouveau hasn't kicked
simpledrm off the hardware yet, but ioremap_wc the whole BAR causes an
overlap with BOOTFB/simpledrm. I think the resource system could do
better here, but it's easier to just delay creating the mapping until
first use.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260706030520.857104-1-airlied@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The get_param ioctl needs access to the parent auxiliary device. Since
ioctl handlers run inside a RegistrationGuard, accept
&NovaDevice<Registered> to obtain &auxiliary::Device<Bound> via as_ref()
directly. This removes the need for drm::Device data, hence set it to
().
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260628145406.2107056-20-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Pass registration data to ioctl handlers via
drm::Device<Registered>::registration_data_with(). The closure's HRTB
ties the lifetime to the closure scope, and the pointer cast shortens it
from 'static internally. The reference is valid for the duration of the
drm_dev_enter/exit critical section held by RegistrationGuard.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260628145406.2107056-19-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add a RegistrationData GAT (Generic Associated Type) to drm::Driver.
The lifetime parameter is tied to the parent bus device binding scope.
Registration<'a, T> takes ownership of the data via Pin<KBox<_>>,
storing it with its real lifetime. The pointer is written to drm::Device
before drm_dev_register() to ensure it is already in place when ioctls
arrive.
Device<T, Registered>::registration_data_with() provides access with the
lifetime shortened from 'static via a pointer cast. Since
Registration::drop() calls drm_dev_unplug(), which performs an SRCU
barrier waiting for all drm_dev_enter() critical sections to complete,
the data is guaranteed to remain valid for the duration of any
RegistrationGuard.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260628145406.2107056-18-dakr@kernel.org
[ Move registration_data_unchecked() to Device<T, Registered> impl
block. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
If drm_dev_register() fails after registering a minor (e.g. render minor
registered, primary minor fails), userspace could have opened the first
minor and entered a drm_dev_enter() critical section. Since the
unplugged flag was never set, the ioctl proceeds while the error path
tears down device resources.
Fix this by introducing drm_dev_synchronize_unplug(), which sets the
unplugged flag and waits for the SRCU barrier, ensuring all in-flight
drm_dev_enter() critical sections complete before cleanup proceeds; call
it on the error path of drm_dev_register().
Fixes: bee330f3d672 ("drm: Use srcu to protect drm_device.unplugged")
Cc: stable@vger.kernel.org
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/all/20260620190648.2E9F61F000E9@smtp.kernel.org/
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260628145406.2107056-17-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Make Ioctl handlers receive a &Device<T, Registered> reference, proving
at the type level that the device is registered and its parent bus
device is bound.
This is achieved by calling registration_guard() on the Device<T, Ioctl>
obtained in ioctl dispatch context. If the device has been unplugged,
the ioctl returns -ENODEV without calling the handler.
To resolve the driver type parameter T for type inference, which the
compiler cannot propagate through method resolution and associated-type
projections alone, a dead-code closure and a helper function are used as
a type-inference anchor.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260628145406.2107056-14-dakr@kernel.org
[ Use imperative mood in commit message; clarify __dev_ctx_cast() doc
comment to reflect Ioctl-to-Registered cast. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Restrict AlwaysRefCounted for gem::Object and gem::shmem::Object to the
Normal context, since only Normal objects should be independently
reference-counted.
To avoid cascading through IntoGEMObject (which had AlwaysRefCounted as
a supertrait), remove AlwaysRefCounted from IntoGEMObject's supertraits
and instead add it as an explicit bound on lookup_handle(), which is the
only BaseObject method that returns an ARef.
Since Object::new() and shmem::Object::new() return ARef<Self>, move
them to Normal-only impl blocks. Similarly, simplify ObjectConfig and
shmem's parent_resv_obj field to the Normal context.
Remove the DeviceContext generic from DriverObject::new() and
Driver::Object, since GEM objects can only be constructed in the Normal
context. Simplify DriverAllocImpl accordingly.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260628145406.2107056-8-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Change the default DeviceContext from Registered to Normal for
drm::Device, gem::Object, gem::shmem::Object and
gem::shmem::ObjectConfig.
Normal is the general-purpose, reference-counted context suitable for
most uses; Registered represents a device that was registered with
userspace and will become a non-owning context obtained through a
RegistrationGuard.
Update the create_handle/lookup_handle bounds from Object<Registered> to
Object<Normal> to match the new default context of GEM objects, and
update the driver device type aliases (NovaDevice, TyrDrmDevice) to
default to Normal.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260628145406.2107056-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add a ParentDevice associated type to the Driver trait, allowing each
DRM driver to declare its parent bus device type (e.g.
auxiliary::Device, platform::Device).
Change UnregisteredDevice::new() to take &T::ParentDevice<Bound>,
ensuring at the type level that the DRM device's parent matches the
declared bus device type.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260628145406.2107056-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Commit 93c97bc8d85d ("drm/msm: dsi: fix PLL init in bonded mode") fixed
one of the issues with the DSI bonded mode, but broke non-bonded usecase
for DSI as reported by Mohit Dsor. Clock divider is being programmed
incorrectly, resultin in the wrong display mode being selected. Revert
the offending commit, letting Neil to work on a better fix.
Fixes: 93c97bc8d85d ("drm/msm: dsi: fix PLL init in bonded mode")
Reported-by: Mohit Dsor <mohit.dsor@oss.qualcomm.com>
Closes: https://lore.kernel.org/r/ae07cef84AmXK43H@hu-mdsor-hyd.qualcomm.com
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/739459/
Link: https://lore.kernel.org/r/20260712-msm-revert-dsi-pll-fix-v1-1-40122689ea25@oss.qualcomm.com
|
|
The kernel-doc referred to @crtc_clk_rate but the actual parameter is @mode_clk_rate.
Assisted-by: Opencode:Big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Fixes: 62b7d6835288 ("drm/msm/dpu: Filter modes based on adjusted mode clock")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/729413/
Link: https://lore.kernel.org/r/20260530201342.10538-1-rosenp@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
MSM8916 runtime DSI commands still go through
msm_dsi_host_xfer_prepare(), which re-applies the link clock rate before
enabling the link clocks. That is fine in principle, but on DSI 6G the
requested byte clock rate often does not exactly match the DSI PHY PLL's
realizable rate. For example, the driver can request 56250000 Hz while the
PLL actually runs at 56246337 Hz.
Because the requested and actual rates differ slightly, every later
link_clk_set_rate() call is treated as a real clock change and re-locks
the PLL. On a video-mode panel without an internal timing generator, such
as samsung,s6d7aa0 / lsl080al03 on MSM8916, that live-clock glitch makes
the panel lose pixel lock and visibly corrupts scanout on each runtime DCS
command, including backlight writes.
Fix this by rounding the computed 6G byte clock rate up front, before it is
stored in msm_host->byte_clk_rate and reused by later transfers. Once the
host carries the PLL-achievable rate instead of the idealized one,
repeated link_clk_set_rate() calls become no-ops in the common clock
framework and no longer re-lock the PLL.
This keeps the normal transfer callback sequencing intact, preserves the
OPP vote path in link_clk_set_rate(), and matches the fix direction
suggested in the original 2018 discussion.
Reported-by: Daniel Mack <daniel@zonque.org>
Closes: https://lore.kernel.org/all/1a682c5b-7fc9-3aaa-120b-64b239a355a3@zonque.org/
Fixes: 6b16f05aa39f ("drm/msm/dsi: Split clk rate setting and enable")
Cc: stable@vger.kernel.org
Signed-off-by: Kavan Smith <kavansmith82@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/738234/
Link: https://lore.kernel.org/r/20260707013240.681012-1-kavansmith82@gmail.com
[DB: dropped extra chunk from the patch]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
cached EDID
After the refactor to struct drm_edid, the fast path in
msm_dp_panel_get_modes() that already held a cached EDID called
drm_edid_connector_add_modes() directly without first calling
drm_edid_connector_update().
The new API requires the update step to associate the EDID with the
connector. Add the missing call. This restores correct behaviour for
the cached-EDID path.
Fixes: 5bea90ad9743 ("drm/msm/dp: switch to struct drm_edid")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Patchwork: https://patchwork.freedesktop.org/patch/731125/
Link: https://lore.kernel.org/r/20260608-drm_plug_flaky_edid-v3-1-1ca632938e7f@oldschoolsolutions.biz
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Rename ForLt to CovariantForLt to prepare for the introduction of a new
ForLt base trait that does not require covariance.
The existing ForLt trait requires covariance, which enables the safe
cast_ref() method. This rename preserves the same semantics under a more
precise name, making room for a weaker ForLt trait in a subsequent
commit.
No functional change.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20260626183630.2585057-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Use `io_project!` for PTE array and message queues to restore the proper
encapsulation.
The remaining `dma_read!` and `dma_write!` is now only acting on
primitives; thus replace by `io_read!` and `io_write!`.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260706-io_projection-v6-17-72cd5d055d54@garyguo.net
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
As we plan to add more KLVs to the migration descriptor packet,
to simplify such extensions and avoid coding errors, start using
our KLV helpers for packet preparing and parsing.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260707220816.677-14-michal.wajdeczko@intel.com
|
|
One of our migration data packet (descriptor) is based on the KLV
encoding. Add a simple descriptor initialization test, as we plan
to use new KLV helper functions there.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260708180921.2715-1-michal.wajdeczko@intel.com
|
|
For completeness, add a simple test to exercise the KLV printer
to make sure it doesn't crash at least.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260711073608.7829-1-michal.wajdeczko@intel.com
|
|
We will soon be encoding complex objects as KLVs using our helper
function. Add few simple tests to make sure this helper function
works as expected.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260710195945.7316-1-michal.wajdeczko@intel.com
|
|
Before we start using string to KLV encoding helper, add a simple
test to make sure it works as expected.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> #v1
Link: https://patch.msgid.link/20260708180755.2684-1-michal.wajdeczko@intel.com
|
|
We will be making more extensive use of GuC KLV helpers. Add simple
tests to ensure the helpers are working as expected.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260707220816.677-9-michal.wajdeczko@intel.com
|
|
We have already started using few KLV keys from the 0xF000 range
that, as we have agreed with the GuC team, will not be used in any
GuC ABI actions. Add definitions for that reserved range and move
our migration KLVs to new ABI header.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260710172534.7201-1-michal.wajdeczko@intel.com
|
|
We have already introduced a helper to encode larger objects. Now
add helper to parse the KLVs buffer. We will use it shortly.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260707220816.677-7-michal.wajdeczko@intel.com
|
|
We plan to encode larger objects as single KLV or set of KLVs.
Add helper for that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260707220816.677-6-michal.wajdeczko@intel.com
|
|
We also plan to encode a text data as KLV. Add helper for that too.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260707220816.677-5-michal.wajdeczko@intel.com
|
|
We plan to encode more data as KLVs. Add helpers for that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260707220816.677-4-michal.wajdeczko@intel.com
|
|
Some future KLVs will be encoded as a group of nested KLVs. Prepare
our KLV printer function to handle such KLVs. List of known group
keys will be updated later, for now just prepare it for testing.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260707220816.677-3-michal.wajdeczko@intel.com
|
|
We can decode and print all KLVs from the buffer, but it might be
helpful also to allow printing just single already decoded KLV.
Extract existing code into new function and make it public.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260707220816.677-2-michal.wajdeczko@intel.com
|
|
The panfrost_transparent_hugepage variable is declared in panfrost_drv.h
but the panfrost_drv.c does not incldue this header. Fix the following
sparse warning by including panfrost_drv.h :
drivers/gpu/drm/panfrost/panfrost_drv.c:958:6: warning: symbol 'panfrost_transparent_hugepage' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20260623104617.768289-1-ben.dooks@codethink.co.uk
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
|
|
If enabling tearing mode or exiting sleep mode fails after the
regulator is enabled, s6d16d0_prepare() returns without asserting
reset or disabling the supply. Since the DRM panel core leaves the
panel unprepared, a later unprepare call skips the driver callback
and the supply remains enabled.
Assert reset and disable the supply before returning the DSI command error.
Fixes: ac1d6d74884e ("drm/panel: Add driver for Samsung S6D16D0 panel")
Assisted-by: Codex:gpt-5
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260704070648.35249-1-acharyalaxman8848@gmail.com
|
|
alloc_primary_gt() and alloc_media_gt() both operate in the context of a
specific tile, and the configfs-disabled messages describe a per-tile
primary/media GT. Switch from xe_info(xe, ...) to xe_tile_info(tile, ...)
so the log lines are prefixed with "Tile%u:", which disambiguates the
message on multi-tile devices.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260708221233.3251663-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
|
|
Add a new configfs boolean attribute 'enable_multi_queue' that lets an
administrator force-disable multi-queue support on a device before it
binds to the driver. The attribute defaults to true (use the platform
hardware capability as-is); writing 0 force-disables multi-queue. This
is intended for debugging and for validating non-multi-queue code paths
on hardware that would otherwise expose multi-queue.
The override disables multi-queue at two levels:
- UAPI: In alloc_primary_gt(), clear
gt->info.multi_queue_engine_class_mask on the primary GT so that
xe_gt_supports_multi_queue() returns false and attempts to create
a multi-queue group via DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_GROUP
are rejected.
- GuC: In guc_ctl_feature_flags(), set the GUC_CTL_DISABLE_MULTI_QUEUE
(BIT(24)) init-params bit on GuC firmware older than 70.66. On GuC
firmware 70.66 and above, guc_waklv_init() emits the new
GUC_FEATURE_KLV_DISABLE_MULTI_QUEUE Feature KLV (0x5001) via the ADS
WA/Feature KLV buffer instead. Feature KLVs share the WA KLV buffer.
The attribute is rejected after the device has been bound, so it only
takes effect during probe:
# echo 0 > /sys/kernel/config/xe/0000:03:00.0/enable_multi_queue
# echo 0000:03:00.0 > /sys/bus/pci/drivers/xe/bind
v2: Add log for multi-queue disabled. (Niranjana)
v3: Rename attribute to enable_multi_queue with default true. (Stuart &&
Niranjana)
v4: rebase.
Assisted-by: Claude:claude-opus-4.7
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260709200822.3257825-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
|
|
Ahead of reworking the reference counting logic for platform devices,
encapsulate the assignment of the firmware node for dynamically allocated
platform devices with the provided helper.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-15-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simple KMS helper are deprecated since they only add an intermediate
layer between drivers and the atomic modesetting.
This patch removes the drm_simple_encoder_init() helper usage in the
qxl display driver by open coding it and using the encoder atomic
helpers directly. This is a step to eventually get rid of this simple
KMS helper, once all drivers that use it have been converted.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260707-qxl-simple-v2-1-08d21bc74a41@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
soc/tegra: pmc: Fixes for v7.2
This contains two fixes, one for a bad error unwinding path and another
for an #ifdef block that wasn't covering all the combinations correctly.
* tag 'tegra-for-7.2-pmc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: fix #ifdef block in header
drm/tegra: Fix a strange error handling path
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
NVL-S with latest GuC should be the first platform combo to
support the special GUC_PAGING_CLASS feature.
v2:
- Update with the final GuC version
v3:
- Split VF vs PF versioning. Which is recommendation from GuC side.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260626111520.487997-22-matthew.auld@intel.com
|
|
We were doing this anyway, but going forward for paging engines,
agreement is to always reserve BCS instances in top down fashion. This
hopefully future proofs things for VFs, where in some low-level places
it might only have the physical BCS instance from the hw pov. If we
stick to a consistent mapping scheme, it should make it possible to
determine if this is a special paging engine, or not.
v2 (Daniele)
- Give a concrete example, like with page fault descriptor
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260626111520.487997-21-matthew.auld@intel.com
|
|
When host PF writes the logical configuration for the GUC PAGING engine,
the VF is meant to query it, and mirror it. Size of N means we have
paging logical index range [0, N-1], with N fewer normal copy engines.
Agreement is that PF will only spawn PAGING engines on NVL-S+, so this
should be zero on older platforms, where we should simply fall back to
the old behaviour.
v2 (Sashiko):
- We can't call use the guc_has_paging_engine() this early in the VF
code. With that just unconditionally do the query, if the GuC is new
enough and take the value as-is. With that drop the -1 special case and
just let the upper layers figure out the rest.
v3:
- Also update xe_guc_klv_key_to_string. (Michal)
- Add kernel-doc for xe_gt_sriov_vf_paging_engines(), plus other
tweaks. (Michal)
- Update with final GuC version.
v4:
- Just fallback to manual reserve when vf reported paging engines is
zero. Will revisit in the future.
v5 (Michal):
- Convert the assert to a full abort if we ever see non-zero GuC
paging engine count, on pre-nvl.
- Move the VF hunk in guc_has_paging_engine() here.
- Some small tweaks.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260626111520.487997-20-matthew.auld@intel.com
|
|
We need to re-map the submit mask so that we correctly account for the
logical mask of paging engines, if the GUC_PAGING_CLASS is in play. We
could also have multiple instances (possible on VF), so we need to
handle that also.
v2 (Daniele):
- Move the implementation to guc_submit.c
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260626111520.487997-19-matthew.auld@intel.com
|
|
In the GuC backend, we need a different logical instance when referring
to the reserved paging engine. Under the hood, this is still just the
same physical BSC engine, however from the GuC POV this is actually
re-mapped to a separate GUC_PAGING_CLASS, with the logical index
starting from zero.
The idea is to not leak this into the upper layers, since this is GuC
version specific, so the changes here are purely on the GuC side.
No functional change.
v2:
- Add some kernel-doc to explain the usage.
- Move the implementation to guc.c
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260626111520.487997-18-matthew.auld@intel.com
|
|
On newer platforms, the paging configuration is now configured by the PF
via the ADS object, where VF side should ensure that everything
configured as GUC_PAGING_CLASS is correctly mirrored on VF side. For
example PF could in theory reserve two BCS instances, and we expect VF
to mirror that.
With that move towards having a logical mask of all the paging engines,
and also generalise selecting those engines, based on the number of
paging engines. Also cache the first designated paging engine, which
will makes things a little cleaner here, and in later patches.
No functional changes for existing platforms.
v2 (Sashiko):
- Rework the loop slightly so that we don't needlessly check for the
paging engine, before we have correctly set the logical instance.
- Add a proper error return, if we encounter a bogus paging config.
Thinking ahead to VF where the config is defined by the PF, we
should just gracefully exit the probe sequence.
v3:
- Move paging_engines > copy_engines engines check to VF patch.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20260626111520.487997-17-matthew.auld@intel.com
|
|
Prefer is_usm_hwe() here.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260626111520.487997-16-matthew.auld@intel.com
|
|
On newer platforms, the GuC has a new engine class which we need to use
to refer to the dedicated/reserved KMD BCS engine. With that, add the
plumbing in the GuC backend to support GUC_PAGING_CLASS and
GUC_CAPTURE_LIST_CLASS_PAGING.
Currently this is still turned off.
v2 (Daniele)
- Also add adjust the capture list for hpg, so we account for nvl-s.
- Move single paging engine assert to a more natural place.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260626111520.487997-15-matthew.auld@intel.com
|
|
Rather than inferring the GuC engine class from the generic hw engine
class, pass in the hwe itself, which gives the complete view, like
instance etc. On future GuC versions, there is dedicated PAGING class to
identify the KMD reserved BCS engine, so we need more info here in order
to return the correct GuC specific engine class.
With this everything should now be using the new hwe based interface. No
functional changes.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260626111520.487997-14-matthew.auld@intel.com
|
|
Currently in the lrc init flow on the ads side, we loop through each
generic engine class and convert that to the respective guc engine
class. However, with some upcoming changes, it will be better to go the
opposite way and loop through every guc engine class, and convert that
to the generic engine class.
This will be needed in an upcoming patch where we have a new guc engine
class that just matches up to the existing blitter/copy class, but needs
to be treated as a separate entity from the normal copy lrc, when
setting up the ADS.
This also reworks engine_enable_mask to operate on the guc_class, that
way we can easily filter out the PAGING vs normal BSC, when applicable.
As a bonus, this also gets rid of two xe_engine_class_to_guc_class()
users which will be helpful for the next patch.
No functional changes.
v2 (Daniele):
- Simplify fill_engine_enable_masks() to just loop over all guc
classes.
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260626111520.487997-13-matthew.auld@intel.com
|
|
We've had an unknown Turing issue for a while with page faults since
large pages and compression.
I've got a patch series that syncs all our L2 handling with ogkm and it
made this fault happen more.
After writing a bunch of debugging patches, I spotted an invalid LPT
entry where there should have been a valid one.
A 64K MAP succeeds on a range, but a subsequent SPT put drops SPT refs
across multiple ranges,
We shouldn't assume all ranges where SPTEs go away will have the same
sparse/invalid/valid state, just iterate over each instead and do the
right thing.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes: d19512f5abb1 ("nouveau/vmm: start tracking if the LPT PTE is valid. (v6)")
Link: https://patch.msgid.link/20260615044737.3419585-1-airlied@gmail.com
[ Properly format commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
(cherry picked from commit d008141ed4ce924167a03d46fbce9ad1fe4efa29)
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix PTE index in xe_vm_populate_pgtable for chunked binds (Matt Brost)
- Wait on external BO kernel fences in exec IOCTL (Matt Brost)
- Remove duplicate include (Anas Khan)
- Free madvise VMA array on L2 flush failure (Guangshuo Li)
- Stub notifier_lock helpers when DRM_GPUSVM=n (Shuicheng Lin)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/alASIbW318Rl-HTv@fedora
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-7.2-2026-07-09:
amdgpu:
- PSP 15.0.9 update
- SMU 15.0.9 update
- VCN 5.3 fix
- VI ASPM fix
- Userq fix
- lifetime fix for amdgpu_vm_get_task_info_pasid()
- Gfx10 fix
- SMU 14 fix
amdkfd:
- CRIU bounds checking fixes
- secondary context id fix
- Event bounds checking fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260709212303.15913-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v7.2-rc3:
- Fix uaf in amdxdna mmap failure path.
- A lot of deadlocks, access races and return value fixes in amdxdna.
- Fix analogix_dp bitshifts during link training.
- Use direct label in drm_exec.
- Fix absent indirect bo handling in v3d.
- Sync on first active crtc in fb_dirty, rather than first crtc.
- Rework try_harder in the buddy allocator.
- Make imagination function static to solve compiler warning.
- Fix imagination error checking.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/71e5b48b-307f-47f5-8fd5-b60ea43e4196@linux.intel.com
|