summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2024-02-05Merge tag 'v5.4.264' into toradex_5.4.yMax Krummenacher
This is the 5.4.264 stable release Conflicts: drivers/pci/controller/dwc/pci-imx6.c commit 0f31993721f92 ("PCI: imx6: Install the fault handler only on compatible match") overlaps with our not mainlined THUMB work. Keep both additions sound/soc/codecs/sgtl5000.c commit c062676528865 (ASoC: sgtl5000: Reset the CHIP_CLK_CTRL reg on remove") with a backport of a "fixes" commit.
2023-12-13hwmon: (acpi_power_meter) Fix 4.29 MW bugArmin Wolf
[ Upstream commit 1fefca6c57fb928d2131ff365270cbf863d89c88 ] The ACPI specification says: "If an error occurs while obtaining the meter reading or if the value is not available then an Integer with all bits set is returned" Since the "integer" is 32 bits in case of the ACPI power meter, userspace will get a power reading of 2^32 * 1000 miliwatts (~4.29 MW) in case of such an error. This was discovered due to a lm_sensors bugreport (https://github.com/lm-sensors/lm-sensors/issues/460). Fix this by returning -ENODATA instead. Tested-by: <urbinek@gmail.com> Fixes: de584afa5e18 ("hwmon driver for ACPI 4.0 power meters") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231124182747.13956-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20hwmon: (coretemp) Fix potentially truncated sysfs attribute nameZhang Rui
[ Upstream commit bbfff736d30e5283ad09e748caff979d75ddef7f ] When build with W=1 and "-Werror=format-truncation", below error is observed in coretemp driver, drivers/hwmon/coretemp.c: In function 'create_core_data': >> drivers/hwmon/coretemp.c:393:34: error: '%s' directive output may be truncated writing likely 5 or more bytes into a region of size between 3 and 13 [-Werror=format-truncation=] 393 | "temp%d_%s", attr_no, suffixes[i]); | ^~ drivers/hwmon/coretemp.c:393:26: note: assuming directive output of 5 bytes 393 | "temp%d_%s", attr_no, suffixes[i]); | ^~~~~~~~~~~ drivers/hwmon/coretemp.c:392:17: note: 'snprintf' output 7 or more bytes (assuming 22) into a destination of size 19 392 | snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 393 | "temp%d_%s", attr_no, suffixes[i]); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Given that 1. '%d' could take 10 charactors, 2. '%s' could take 10 charactors ("crit_alarm"), 3. "temp", "_" and the NULL terminator take 6 charactors, fix the problem by increasing CORETEMP_NAME_LENGTH to 28. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Fixes: 7108b80a542b ("hwmon/coretemp: Handle large core ID value") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310200443.iD3tUbbK-lkp@intel.com/ Link: https://lore.kernel.org/r/20231025122316.836400-1-rui.zhang@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-11hwmon: (nct7802) Fix for temp6 (PECI1) processed even if PECI1 disabledGilles Buloz
commit 54685abe660a59402344d5045ce08c43c6a5ac42 upstream. Because of hex value 0x46 used instead of decimal 46, the temp6 (PECI1) temperature is always declared visible and then displayed even if disabled in the chip Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com> Link: https://lore.kernel.org/r/DU0PR10MB62526435ADBC6A85243B90E08002A@DU0PR10MB6252.EURPRD10.PROD.OUTLOOK.COM Fixes: fcdc5739dce03 ("hwmon: (nct7802) add temperature sensor type attribute") Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05hwmon (it87): Fix voltage scaling for chips with 10.9mV ADCsFrank Crawford
[ Upstream commit 968b66ffeb7956acc72836a7797aeb7b2444ec51 ] Fix voltage scaling for chips that have 10.9mV ADCs, where scaling was not performed. Fixes: ead8080351c9 ("hwmon: (it87) Add support for IT8732F") Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> Link: https://lore.kernel.org/r/20230318080543.1226700-2-frank@crawford.emu.id.au [groeck: Update subject and description to focus on bug fix] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: (ina3221) return prober error codeMarcus Folkesson
[ Upstream commit c93f5e2ab53243b17febabb9422a697017d3d49a ] ret is set to 0 which do not indicate an error. Return -EINVAL instead. Fixes: a9e9dd9c6de5 ("hwmon: (ina3221) Read channel input source info from DT") Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Link: https://lore.kernel.org/r/20230310075035.246083-1-marcus.folkesson@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race ↵Zheng Wang
condition [ Upstream commit cb090e64cf25602b9adaf32d5dfc9c8bec493cd1 ] In xgene_hwmon_probe, &ctx->workq is bound with xgene_hwmon_evt_work. Then it will be started. If we remove the driver which will call xgene_hwmon_remove to clean up, there may be unfinished work. The possible sequence is as follows: Fix it by finishing the work before cleanup in xgene_hwmon_remove. CPU0 CPU1 |xgene_hwmon_evt_work xgene_hwmon_remove | kfifo_free(&ctx->async_msg_fifo);| | |kfifo_out_spinlocked |//use &ctx->async_msg_fifo Fixes: 2ca492e22cb7 ("hwmon: (xgene) Fix crash when alarm occurs before driver probe") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Link: https://lore.kernel.org/r/20230310084007.1403388-1-zyytlz.wz@163.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: (adt7475) Fix masking of hysteresis registersTony O'Brien
[ Upstream commit 48e8186870d9d0902e712d601ccb7098cb220688 ] The wrong bits are masked in the hysteresis register; indices 0 and 2 should zero bits [7:4] and preserve bits [3:0], and index 1 should zero bits [3:0] and preserve bits [7:4]. Fixes: 1c301fc5394f ("hwmon: Add a driver for the ADT7475 hardware monitoring chip") Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20230222005228.158661-3-tony.obrien@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-22hwmon: (adt7475) Display smoothing attributes in correct orderTony O'Brien
[ Upstream commit 5f8d1e3b6f9b5971f9c06d5846ce00c49e3a8d94 ] Throughout the ADT7475 driver, attributes relating to the temperature sensors are displayed in the order Remote 1, Local, Remote 2. Make temp_st_show() conform to this expectation so that values set by temp_st_store() can be displayed using the correct attribute. Fixes: 8f05bcc33e74 ("hwmon: (adt7475) temperature smoothing") Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20230222005228.158661-2-tony.obrien@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11hwmon: (coretemp) Simplify platform device handlingRobin Murphy
[ Upstream commit 6d03bbff456befeccdd4d663177c4d6c75d0c4ff ] Coretemp's platform driver is unconventional. All the real work is done globally by the initcall and CPU hotplug notifiers, while the "driver" effectively just wraps an allocation and the registration of the hwmon interface in a long-winded round-trip through the driver core. The whole logic of dynamically creating and destroying platform devices to bring the interfaces up and down is error prone, since it assumes platform_device_add() will synchronously bind the driver and set drvdata before it returns, thus results in a NULL dereference if drivers_autoprobe is turned off for the platform bus. Furthermore, the unusual approach of doing that from within a CPU hotplug notifier, already commented in the code that it deadlocks suspend, also causes lockdep issues for other drivers or subsystems which may want to legitimately register a CPU hotplug notifier from a platform bus notifier. All of these issues can be solved by ripping this unusual behaviour out completely, simply tying the platform devices to the lifetime of the module itself, and directly managing the hwmon interfaces from the hotplug notifiers. There is a slight user-visible change in that /sys/bus/platform/drivers/coretemp will no longer appear, and /sys/devices/platform/coretemp.n will remain present if package n is hotplugged off, but hwmon users should really only be looking for the presence of the hwmon interfaces, whose behaviour remains unchanged. Link: https://lore.kernel.org/lkml/20220922101036.87457-1-janusz.krzysztofik@linux.intel.com/ Link: https://gitlab.freedesktop.org/drm/intel/issues/6641 Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Link: https://lore.kernel.org/r/20230103114620.15319-1-janusz.krzysztofik@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11hwmon: (mlxreg-fan) Return zero speed for broken fanVadim Pasternak
[ Upstream commit a1ffd3c46267ee5c807acd780e15df9bb692223f ] Currently for broken fan driver returns value calculated based on error code (0xFF) in related fan speed register. Thus, for such fan user gets fan{n}_fault to 1 and fan{n}_input with misleading value. Add check for fan fault prior return speed value and return zero if fault is detected. Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20230212145730.24247-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11hwmon: (ltc2945) Handle error case in ltc2945_value_storeJonathan Cormier
[ Upstream commit 178b01eccfb0b8149682f61388400bd3d903dddc ] ltc2945_val_to_reg errors were not being handled which would have resulted in register being set to 0 (clamped) instead of being left alone. Fixes: 6700ce035f83 ("hwmon: Driver for Linear Technologies LTC2945") Signed-off-by: Jonathan Cormier <jcormier@criticallink.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new()Yang Yingliang
[ Upstream commit 7dec14537c5906b8bf40fd6fd6d9c3850f8df11d ] As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So call it after using to avoid refcount leak. Fixes: 14513ee696a0 ("hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221118093303.214163-1-yangyingliang@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08hwmon: (coretemp) Check for null before removing sysfs attrsPhil Auld
[ Upstream commit a89ff5f5cc64b9fe7a992cf56988fd36f56ca82a ] If coretemp_add_core() gets an error then pdata->core_data[indx] is already NULL and has been kfreed. Don't pass that to sysfs_remove_group() as that will crash in sysfs_remove_group(). [Shortened for readability] [91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label' <cpu offline> [91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188 [91855.165103] #PF: supervisor read access in kernel mode [91855.194506] #PF: error_code(0x0000) - not-present page [91855.224445] PGD 0 P4D 0 [91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI ... [91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80 ... [91855.796571] Call Trace: [91855.810524] coretemp_cpu_offline+0x12b/0x1dd [coretemp] [91855.841738] ? coretemp_cpu_online+0x180/0x180 [coretemp] [91855.871107] cpuhp_invoke_callback+0x105/0x4b0 [91855.893432] cpuhp_thread_fun+0x8e/0x150 ... Fix this by checking for NULL first. Signed-off-by: Phil Auld <pauld@redhat.com> Cc: linux-hwmon@vger.kernel.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221117162313.3164803-1-pauld@redhat.com Fixes: 199e0de7f5df3 ("hwmon: (coretemp) Merge pkgtemp with coretemp") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() failsGaosheng Cui
[ Upstream commit e2a87785aab0dac190ac89be6a9ba955e2c634f2 ] Smatch report warning as follows: drivers/hwmon/ibmpex.c:509 ibmpex_register_bmc() warn: '&data->list' not removed from list If ibmpex_find_sensors() fails in ibmpex_register_bmc(), data will be freed, but data->list will not be removed from driver_data.bmc_data, then list traversal may cause UAF. Fix by removeing it from driver_data.bmc_data before free(). Fixes: 57c7c3a0fdea ("hwmon: IBM power meter driver") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20221117034423.2935739-1-cuigaosheng1@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08hwmon: (i5500_temp) fix missing pci_disable_device()Yang Yingliang
[ Upstream commit 3b7f98f237528c496ea0b689bace0e35eec3e060 ] pci_disable_device() need be called while module exiting, switch to use pcim_enable(), pci_disable_device() will be called in pcim_release(). Fixes: ada072816be1 ("hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221112125606.3751430-1-yangyingliang@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-29hwmon/coretemp: Handle large core ID valueZhang Rui
commit 7108b80a542b9d65e44b36d64a700a83658c0b73 upstream. The coretemp driver supports up to a hard-coded limit of 128 cores. Today, the driver can not support a core with an ID above that limit. Yet, the encoding of core ID's is arbitrary (BIOS APIC-ID) and so they may be sparse and they may be large. Update the driver to map arbitrary core ID numbers into appropriate array indexes so that 128 cores can be supported, no matter the encoding of core ID's. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Len Brown <len.brown@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20221014090147.1836-3-rui.zhang@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15hwmon: (gpio-fan) Fix array out of bounds accessArmin Wolf
[ Upstream commit f233d2be38dbbb22299192292983037f01ab363c ] The driver does not check if the cooling state passed to gpio_fan_set_cur_state() exceeds the maximum cooling state as stored in fan_data->num_speeds. Since the cooling state is later used as an array index in set_fan_speed(), an array out of bounds access can occur. This can be exploited by setting the state of the thermal cooling device to arbitrary values, causing for example a kernel oops when unavailable memory is accessed this way. Example kernel oops: [ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064 [ 807.987369] Mem abort info: [ 807.987398] ESR = 0x96000005 [ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits [ 807.987477] SET = 0, FnV = 0 [ 807.987507] EA = 0, S1PTW = 0 [ 807.987536] FSC = 0x05: level 1 translation fault [ 807.987570] Data abort info: [ 807.987763] ISV = 0, ISS = 0x00000005 [ 807.987801] CM = 0, WnR = 0 [ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000 [ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575 [ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.988691] sp : ffffffc008cf3bd0 [ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000 [ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920 [ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c [ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000 [ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70 [ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c [ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009 [ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8 [ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060 [ 807.989084] Call trace: [ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.989199] cur_state_store+0x84/0xd0 [ 807.989221] dev_attr_store+0x20/0x38 [ 807.989262] sysfs_kf_write+0x4c/0x60 [ 807.989282] kernfs_fop_write_iter+0x130/0x1c0 [ 807.989298] new_sync_write+0x10c/0x190 [ 807.989315] vfs_write+0x254/0x378 [ 807.989362] ksys_write+0x70/0xf8 [ 807.989379] __arm64_sys_write+0x24/0x30 [ 807.989424] invoke_syscall+0x4c/0x110 [ 807.989442] el0_svc_common.constprop.3+0xfc/0x120 [ 807.989458] do_el0_svc+0x2c/0x90 [ 807.989473] el0_svc+0x24/0x60 [ 807.989544] el0t_64_sync_handler+0x90/0xb8 [ 807.989558] el0t_64_sync+0x1a0/0x1a4 [ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416) [ 807.989627] ---[ end trace 8ded4c918658445b ]--- Fix this by checking the cooling state and return an error if it exceeds the maximum cooling state. Tested on a Raspberry Pi 3. Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220830011101.178843-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-07hwmon: (ibmaem) don't call platform_device_del() if platform_device_add() failsYang Yingliang
[ Upstream commit d0e51022a025ca5350fafb8e413a6fe5d4baf833 ] If platform_device_add() fails, it no need to call platform_device_del(), split platform_device_unregister() into platform_device_del/put(), so platform_device_put() can be called separately. Fixes: 8808a793f052 ("ibmaem: new driver for power/energy/temp meters in IBM System X hardware") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220701074153.4021556-1-yangyingliang@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-25Revert "hwmon: Make chip parameter for with_info API mandatory"Greg Kroah-Hartman
This reverts commit 1ec0bc72f5dab3ab367ae5230cf6f212d805a225 which is commit ddaefa209c4ac791c1262e97c9b2d0440c8ef1d5 upstream. It should not have been applied to the stable trees. Link: https://lore.kernel.org/r/20220622154454.GA1864037@roeck-us.net Reported-by: Julian Haller <julian.haller@philips.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14hwmon: Make chip parameter for with_info API mandatoryGuenter Roeck
[ Upstream commit ddaefa209c4ac791c1262e97c9b2d0440c8ef1d5 ] Various attempts were made recently to "convert" the old hwmon_device_register() API to devm_hwmon_device_register_with_info() by just changing the function name without actually converting the driver. Prevent this from happening by making the 'chip' parameter of devm_hwmon_device_register_with_info() mandatory. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-19Merge tag 'v5.4.193' into toradex_5.4.yPhilippe Schenker
This is the 5.4.193 stable release
2022-05-18hwmon: (f71882fg) Fix negative temperatureJi-Ze Hong (Peter Hong)
[ Upstream commit 4aaaaf0f279836f06d3b9d0ffeec7a1e1a04ceef ] All temperature of Fintek superio hwmonitor that using 1-byte reg will use 2's complement. In show_temp() temp = data->temp[nr] * 1000; When data->temp[nr] read as 255, it indicate -1C, but this code will report 255C to userspace. It'll be ok when change to: temp = ((s8)data->temp[nr]) * 1000; Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Link: https://lore.kernel.org/r/20220418090706.6339-1-hpeter+linux_kernel@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18hwmon: (ltq-cputemp) restrict it to SOC_XWAYRandy Dunlap
[ Upstream commit 151d6dcbed836270c6c240932da66f147950cbdb ] Building with SENSORS_LTQ_CPUTEMP=y with SOC_FALCON=y causes build errors since FALCON does not support the same features as XWAY. Change this symbol to depend on SOC_XWAY since that provides the necessary interfaces. Repairs these build errors: ../drivers/hwmon/ltq-cputemp.c: In function 'ltq_cputemp_enable': ../drivers/hwmon/ltq-cputemp.c:23:9: error: implicit declaration of function 'ltq_cgu_w32'; did you mean 'ltq_ebu_w32'? [-Werror=implicit-function-declaration] 23 | ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR); ../drivers/hwmon/ltq-cputemp.c:23:21: error: implicit declaration of function 'ltq_cgu_r32'; did you mean 'ltq_ebu_r32'? [-Werror=implicit-function-declaration] 23 | ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR); ../drivers/hwmon/ltq-cputemp.c: In function 'ltq_cputemp_probe': ../drivers/hwmon/ltq-cputemp.c:92:31: error: 'SOC_TYPE_VR9_2' undeclared (first use in this function) 92 | if (ltq_soc_type() != SOC_TYPE_VR9_2) Fixes: 7074d0a92758 ("hwmon: (ltq-cputemp) add cpu temp sensor driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Florian Eckert <fe@dev.tdt.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20220509234740.26841-1-rdunlap@infradead.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18hwmon: (tmp401) Add OF device ID tableCamel Guo
[ Upstream commit 3481551f035725fdc46885425eac3ef9b58ae7b7 ] This driver doesn't have of_match_table. This makes the kernel module tmp401.ko lack alias patterns (e.g: of:N*T*Cti,tmp411) to match DT node of the supported devices hence this kernel module will not be automatically loaded. After adding of_match_table to this driver, the folllowing alias will be added into tmp401.ko. $ modinfo drivers/hwmon/tmp401.ko filename: drivers/hwmon/tmp401.ko ...... author: Hans de Goede <hdegoede@redhat.com> alias: of:N*T*Cti,tmp435C* alias: of:N*T*Cti,tmp435 alias: of:N*T*Cti,tmp432C* alias: of:N*T*Cti,tmp432 alias: of:N*T*Cti,tmp431C* alias: of:N*T*Cti,tmp431 alias: of:N*T*Cti,tmp411C* alias: of:N*T*Cti,tmp411 alias: of:N*T*Cti,tmp401C* alias: of:N*T*Cti,tmp401 ...... Fixes: af503716ac14 ("i2c: core: report OF style module alias for devices registered via OF") Signed-off-by: Camel Guo <camel.guo@axis.com> Link: https://lore.kernel.org/r/20220503114333.456476-1-camel.guo@axis.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12hwmon: (adt7470) Fix warning on module removalArmin Wolf
commit 7b2666ce445c700b8dcee994da44ddcf050a0842 upstream. When removing the adt7470 module, a warning might be printed: do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffffa006052b>] adt7470_update_thread+0x7b/0x130 [adt7470] This happens because adt7470_update_thread() can leave the kthread in TASK_INTERRUPTIBLE state when the kthread is being stopped before the call of set_current_state(). Since kthread_exit() might sleep in exit_signals(), the warning is printed. Fix that by using schedule_timeout_interruptible() and removing the call of set_current_state(). This causes TASK_INTERRUPTIBLE to be set after kthread_should_stop() which might cause the kthread to exit. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Fixes: 93cacfd41f82 (hwmon: (adt7470) Allow faster removal) Signed-off-by: Armin Wolf <W_Armin@gmx.de> Tested-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220407101312.13331-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15hwmon: (pmbus) Add Vin unit off handlingBrandon Wyman
[ Upstream commit a5436af598779219b375c1977555c82def1c35d0 ] If there is an input undervoltage fault, reported in STATUS_INPUT command response, there is quite likely a "Unit Off For Insufficient Input Voltage" condition as well. Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit attributes to include both bits in the mask for clearing faults. If an input undervoltage fault occurs, causing a unit off for insufficient input voltage, but the unit is off bit is not cleared, the STATUS_WORD will not be updated to clear the input fault condition. Including the unit is off bit (bit 3) allows for the input fault condition to completely clear. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20220317232123.2103592-1-bjwyman@gmail.com Fixes: b4ce237b7f7d3 ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers") [groeck: Dropped unnecessary ()] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNINGArmin Wolf
[ Upstream commit 647d6f09bea7dacf4cdb6d4ea7e3051883955297 ] If the watchdog was already enabled by the BIOS after booting, the watchdog infrastructure needs to regularly send keepalives to prevent a unexpected reset. WDOG_ACTIVE only serves as an status indicator for userspace, we want to use WDOG_HW_RUNNING instead. Since my Fujitsu Esprimo P720 does not support the watchdog, this change is compile-tested only. Suggested-by: Guenter Roeck <linux@roeck-us.net> Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core) Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220131211935.3656-5-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15hwmon: (pmbus) Add mutex to regulator opsPatrick Rudolph
[ Upstream commit 686d303ee6301261b422ea51e64833d7909a2c36 ] On PMBUS devices with multiple pages, the regulator ops need to be protected with the update mutex. This prevents accidentally changing the page in a separate thread while operating on the PMBUS_OPERATION register. Tested on Infineon xdpe11280 while a separate thread polls for sensor data. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support") Cc: Alan Tull <atull@opensource.altera.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16hwmon: (dell-smm) Speed up setting of fan speedArmin Wolf
commit c0d79987a0d82671bff374c07f2201f9bdf4aaa2 upstream. When setting the fan speed, i8k_set_fan() calls i8k_get_fan_status(), causing an unnecessary SMM call since from the two users of this function, only i8k_ioctl_unlocked() needs to know the new fan status while dell_smm_write() ignores the new fan status. Since SMM calls can be very slow while also making error reporting difficult for dell_smm_write(), remove the function call from i8k_set_fan() and call it separately in i8k_ioctl_unlocked(). Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211021190531.17379-6-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-01hwmon: (lm90) Mark alert as broken for MAX6654Guenter Roeck
[ Upstream commit a53fff96f35763d132a36c620b183fdf11022d7a ] Experiments with MAX6654 show that its alert function is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 229d495d8189 ("hwmon: (lm90) Add max6654 support to lm90 driver") Cc: Josh Lehan <krellan@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01hwmon: (lm90) Reduce maximum conversion rate for G781Guenter Roeck
[ Upstream commit a66c5ed539277b9f2363bbace0dba88b85b36c26 ] According to its datasheet, G781 supports a maximum conversion rate value of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only support a maximum conversion rate value of 7 (125 ms). On the other side, chips labeled G781-1 and G784 were found to support a conversion rate value of 8. There is no known means to distinguish G780 from G781 or G784; all chips report the same manufacturer ID and chip revision. Setting the conversion rate register value to 8 on chips not supporting it causes unexpected behavior since the real conversion rate is set to 0 (16 seconds) if a value of 8 is written into the conversion rate register. Limit the conversion rate register value to 7 for all G78x chips to avoid the problem. Fixes: ae544f64cc7b ("hwmon: (lm90) Add support for GMT G781") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01hwmon: (lm90) Mark alert as broken for MAX6680Guenter Roeck
commit 94746b0ba479743355e0d3cc1cb9cfe3011fb8be upstream. Experiments with MAX6680 and MAX6681 show that the alert function of those chips is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 4667bcb8d8fc ("hwmon: (lm90) Introduce chip parameter structure") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-01hwmon: (lm90) Mark alert as broken for MAX6646/6647/6649Guenter Roeck
commit f614629f9c1080dcc844a8430e3fb4c37ebbf05d upstream. Experiments with MAX6646 and MAX6648 show that the alert function of those chips is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 4667bcb8d8fc ("hwmon: (lm90) Introduce chip parameter structure") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-10Merge tag 'v5.4.161' into toradex_5.4.yDenys Drozdov
This is the 5.4.161 stable release
2021-12-29hwmon: (lm90) Do not report 'busy' status bit as alarmGuenter Roeck
commit cdc5287acad9ede121924a9c9313544b80d15842 upstream. Bit 7 of the status register indicates that the chip is busy doing a conversion. It does not indicate an alarm status. Stop reporting it as alarm status bit. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-29hwmom: (lm90) Fix citical alarm status for MAX6680/MAX6681Guenter Roeck
commit da7dc0568491104c7acb632e9d41ddce9aaabbb1 upstream. Tests with a real chip and a closer look into the datasheet reveals that the local and remote critical alarm status bits are swapped for MAX6680/MAX6681. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-29hwmon: (lm90) Drop critical attribute support for MAX6654Guenter Roeck
[ Upstream commit 16ba51b5dcd3f6dde2e51d5ccc86313119dcf889 ] Tests with a real chip and a closer look into the datasheet show that MAX6654 does not support CRIT/THERM/OVERTEMP limits, so drop support of the respective attributes for this chip. Introduce LM90_HAVE_CRIT flag and use it to instantiate critical limit attributes to solve the problem. Cc: Josh Lehan <krellan@google.com> Fixes: 229d495d8189 ("hwmon: (lm90) Add max6654 support to lm90 driver") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29hwmon: (lm90) Introduce flag indicating extended temperature supportGuenter Roeck
[ Upstream commit f347e249fcf920ad6974cbd898e2ec0b366a1c34 ] A flag indicating extended temperature support makes it easier to add support for additional chips with this functionality. Cc: David T. Wilson <david.wilson@nasa.gov> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29hwmon: (lm90) Add basic support for TI TMP461Guenter Roeck
[ Upstream commit f8344f7693a25d9025a59d164450b50c6f5aa3c0 ] TMP461 is almost identical to TMP451 and was actually detected as TMP451 with the existing lm90 driver if its I2C address is 0x4c. Add support for it to the lm90 driver. At the same time, improve the chip detection function to at least try to distinguish between TMP451 and TMP461. As a side effect, this fixes commit 24333ac26d01 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations"). TMP461 does not support word operations on temperature registers, which causes bad temperature readings with the tmp401 driver. The lm90 driver does not perform word operations on temperature registers and thus does not have this problem. Support is listed as basic because TMP461 supports a sensor resolution of 0.0625 degrees C, while the lm90 driver assumes a resolution of 0.125 degrees C. Also, the TMP461 supports negative temperatures with its default temperature range, which is not the case for similar chips supported by the lm90 and the tmp401 drivers. Those limitations will be addressed with follow-up patches. Fixes: 24333ac26d01 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations") Reported-by: David T. Wilson <david.wilson@nasa.gov> Cc: David T. Wilson <david.wilson@nasa.gov> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29hwmon: (lm90) Add max6654 support to lm90 driverJosh Lehan
[ Upstream commit 229d495d8189ae785dacee72e5633a58edc25ddf ] Add support for the Maxim MAX6654 to the lm90 driver. The MAX6654 is a temperature sensor, similar to the others, but with some differences regarding the configuration register, and the sampling rate at which extended resolution becomes possible. Signed-off-by: Josh Lehan <krellan@google.com> Link: https://lore.kernel.org/r/20200513184248.145765-1-krellan@google.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29hwmon: (lm90) Fix usage of CONFIG2 register in detect functionGuenter Roeck
[ Upstream commit fce15c45d3fbd9fc1feaaf3210d8e3f8b33dfd3a ] The detect function had a comment "Make compiler happy" when id did not read the second configuration register. As it turns out, the code was checking the contents of this register for manufacturer ID 0xA1 (NXP Semiconductor/Philips), but never actually read the register. So it wasn't surprising that the compiler complained, and it indeed had a point. Fix the code to read the register contents for manufacturer ID 0xa1. At the same time, the code was reading the register for manufacturer ID 0x41 (Analog Devices), but it was not using the results. In effect it was just checking if reading the register returned an error. That doesn't really add much if any value, so stop doing that. Fixes: f90be42fb383 ("hwmon: (lm90) Refactor reading of config2 register") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-17hwmon: (dell-smm) Fix warning on /proc/i8k creation errorArmin Wolf
commit dbd3e6eaf3d813939b28e8a66e29d81cdc836445 upstream. The removal function is called regardless of whether /proc/i8k was created successfully or not, the later causing a WARN() on module removal. Fix that by only registering the removal function if /proc/i8k was created successfully. Tested on a Inspiron 3505. Fixes: 039ae58503f3 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211112171440.59006-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-17hwmon: (pmbus/lm25066) Let compiler determine outer dimension of lm25066_coeffZev Weiss
[ Upstream commit b7931a7b0e0df4d2a25fedd895ad32c746b77bc1 ] Maintaining this manually is error prone (there are currently only five chips supported, not six); gcc can do it for us automatically. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Fixes: 666c14906b49 ("hwmon: (pmbus/lm25066) Drop support for LM25063") Link: https://lore.kernel.org/r/20210928092242.30036-5-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17hwmon: Fix possible memleak in __hwmon_device_register()Yang Yingliang
[ Upstream commit ada61aa0b1184a8fda1a89a340c7d6cc4e59aee5 ] I got memory leak as follows when doing fault injection test: unreferenced object 0xffff888102740438 (size 8): comm "27", pid 859, jiffies 4295031351 (age 143.992s) hex dump (first 8 bytes): 68 77 6d 6f 6e 30 00 00 hwmon0.. backtrace: [<00000000544b5996>] __kmalloc_track_caller+0x1a6/0x300 [<00000000df0d62b9>] kvasprintf+0xad/0x140 [<00000000d3d2a3da>] kvasprintf_const+0x62/0x190 [<000000005f8f0f29>] kobject_set_name_vargs+0x56/0x140 [<00000000b739e4b9>] dev_set_name+0xb0/0xe0 [<0000000095b69c25>] __hwmon_device_register+0xf19/0x1e50 [hwmon] [<00000000a7e65b52>] hwmon_device_register_with_info+0xcb/0x110 [hwmon] [<000000006f181e86>] devm_hwmon_device_register_with_info+0x85/0x100 [hwmon] [<0000000081bdc567>] tmp421_probe+0x2d2/0x465 [tmp421] [<00000000502cc3f8>] i2c_device_probe+0x4e1/0xbb0 [<00000000f90bda3b>] really_probe+0x285/0xc30 [<000000007eac7b77>] __driver_probe_device+0x35f/0x4f0 [<000000004953d43d>] driver_probe_device+0x4f/0x140 [<000000002ada2d41>] __device_attach_driver+0x24c/0x330 [<00000000b3977977>] bus_for_each_drv+0x15d/0x1e0 [<000000005bf2a8e3>] __device_attach+0x267/0x410 When device_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used instead of calling hwmon_dev_release() to give up the device reference, then the name will be freed in kobject_cleanup(). Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: bab2243ce189 ("hwmon: Introduce hwmon_device_register_with_groups") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211012112758.2681084-1-yangyingliang@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17hwmon: (pmbus/lm25066) Add offset coefficientsZev Weiss
commit ae59dc455a78fb73034dd1fbb337d7e59c27cbd8 upstream. With the exception of the lm5066i, all the devices handled by this driver had been missing their offset ('b') coefficients for direct format readings. Cc: stable@vger.kernel.org Fixes: 58615a94f6a1 ("hwmon: (pmbus/lm25066) Add support for LM25056") Fixes: e53e6497fc9f ("hwmon: (pmbus/lm25066) Refactor device specific coefficients") Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-2-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-05Merge tag 'v5.4.154' into toradex_5.4.yFrancesco Dolcini
This is the 5.4.154 stable release
2021-10-06hwmon: (tmp421) fix rounding for negative valuesPaul Fertser
[ Upstream commit 724e8af85854c4d3401313b6dd7d79cf792d8990 ] Old code produces -24999 for 0b1110011100000000 input in standard format due to always rounding up rather than "away from zero". Use the common macro for division, unify and simplify the conversion code along the way. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Signed-off-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/r/20210924093011.26083-3-fercerpav@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-06hwmon: (tmp421) report /PVLD condition as faultPaul Fertser
[ Upstream commit 540effa7f283d25bcc13c0940d808002fee340b8 ] For both local and remote sensors all the supported ICs can report an "undervoltage lockout" condition which means the conversion wasn't properly performed due to insufficient power supply voltage and so the measurement results can't be trusted. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Signed-off-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/r/20210924093011.26083-2-fercerpav@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-06hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced ↵Vadim Pasternak
from sysfs [ Upstream commit e6fab7af6ba1bc77c78713a83876f60ca7a4a064 ] Fan speed minimum can be enforced from sysfs. For example, setting current fan speed to 20 is used to enforce fan speed to be at 100% speed, 19 - to be not below 90% speed, etcetera. This feature provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units or high system ambient temperature. Request for changing fan minimum speed is configuration request and can be set only through 'sysfs' write procedure. In this situation value of argument 'state' is above nominal fan speed maximum. Return non-zero code in this case to avoid thermal_cooling_device_stats_update() call, because in this case statistics update violates thermal statistics table range. The issues is observed in case kernel is configured with option CONFIG_THERMAL_STATISTICS. Here is the trace from KASAN: [ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444 [ 159.545625] Call Trace: [ 159.548366] dump_stack+0x92/0xc1 [ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.635869] thermal_zone_device_update+0x345/0x780 [ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0 [ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core] [ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core] [ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core] [ 160.070233] RIP: 0033:0x7fd995909970 [ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff .. [ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970 [ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001 [ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700 [ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013 [ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013 [ 160.143671] [ 160.145338] Allocated by task 2924: [ 160.149242] kasan_save_stack+0x19/0x40 [ 160.153541] __kasan_kmalloc+0x7f/0xa0 [ 160.157743] __kmalloc+0x1a2/0x2b0 [ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0 [ 160.167687] __thermal_cooling_device_register+0x1b5/0x500 [ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0 [ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan] [ 160.248140] [ 160.249807] The buggy address belongs to the object at ffff888116163400 [ 160.249807] which belongs to the cache kmalloc-1k of size 1024 [ 160.263814] The buggy address is located 64 bytes to the right of [ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800) [ 160.277536] The buggy address belongs to the page: [ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160 [ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0 [ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0 [ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000 [ 160.327033] page dumped because: kasan: bad access detected [ 160.333270] [ 160.334937] Memory state around the buggy address: [ 160.356469] >ffff888116163800: fc .. Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210916183151.869427-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-10 14:58:15 +0000