summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2012-02-10ENGR00174127 mag3110: merge the mag3110 sensor driverXinyu Chen
Merge mag3110 drivers from sensor team. The drivers are updated with chip position configure in driver, export set delay interface to userspace and use polling mode instead of interrupt mode. Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
2012-02-10ENGR00174024 mma8451: update 3-axis accelerometer driverXinyu Chen
Merge mma8451 drivers from sensor team. The drivers are updated with chip position configure in driver, export enable and position interface to userspace. Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
2012-01-09ENGR00143921-1 - EPDC/MAX17135: Add controls for V3P3 regulatorDanny Nold
- Added V3P3 regulator to max17135 - Added calls to enable/disable V3P3 regulator from EPDC driver - Improved Kconfig detail for max17135 MFD and HWMON entries Signed-off-by: Danny Nold <dannynold@freescale.com>
2012-01-09ENGR00153275-1 ahci L2638 add the standalone ahci temperature monitorRichard Zhu
based on the 2.6.38 kernel mainline, refer to linux lm-sensors architeture, add the standalone ahci temperature monitor driver on fsl i.mx53 platforms. Less than half sencond is used in one temperature read operation. usage: Use the following cmd to cat the i.mx53 soc temperature after boot up i.mx53 system in user space. for example: ...$ cat /sys/class/hwmon/hwmon1/device/temp1_input 61000 or run the following cmd after configure the lm-sensors ...$ sensors imx-ahci-hwmon-isa-0000 Adapter: ISA adapter temp1: +58.0 C Signed-off-by: Richard Zhu <r65037@freescale.com>
2012-01-09ENGR00142950-2 - MAX17135 EPD PMIC: Ported to 2.6.38 kernelDanny Nold
- Ported MAX17135 MFD core driver to 2.6.38 - Ported MAX17135 HWMON temperature sensor driver to 2.6.38 - Ported MAX17135 regulator driver to 2.6.38 Signed-off-by: Danny Nold <dannynold@freescale.com>
2012-01-09ENGR00140036 Set init max poll delay time in mma sensor driverSammy He
1. Set initial max poll delay time in mma8450 and mma8451 accelerometer sensor driver. And remove one build warning. 2. Remove dev parent set. Signed-off-by: Sammy He <r62914@freescale.com>
2012-01-09ENGR00141391-2 PMIC: porting da9053 to i.mx platformZhou Jingyu
Fix da9053 backlight Kconfig error porting da9052 regulator driver Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com>
2012-01-09ENGR00141391-1 PMIC: Add DA9053 source code from DialogZhou Jingyu
Add DA9053 original source code Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com>
2012-01-09ENGR00137546-1 MMA8450: Add mma8450 accelerometer driverSammy He
Add mma8450 accelerometer driver. Signed-off-by: Sammy He <r62914@freescale.com>
2012-01-09ENGR00137485-1 MMA8451: Add mma8451 accelerometer driverSammy He
Add mma8451 accelerometer driver. Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com> Signed-off-by: Sammy He <r62914@freescale.com>
2011-12-21hwmon: (coretemp) Fix oops on CPU offliningJean Delvare
This is for stable kernel branch 3.0 only. Previous and later versions have different code paths and are not affected by this bug. This is the same fix as "hwmon: (coretemp) Fix oops on driver load" but for the CPU offlining case. Sorry for missing it at first. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Durgadoss R <durgadoss.r@intel.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21hwmon: (jz4740) fix signedness bugAxel Lin
commit 0b57d7602b68f7b2786b2f0e22da39cbd4139a95 upstream. wait_for_completion_interruptible_timeout() may return negative value. In this case, checking if (t > 0) will return true if t is unsigned. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-09hwmon: (coretemp) Fix oops on driver loadJean Delvare
This is for stable kernel branch 3.0 only. Previous and later versions have different code paths and are not affected by this bug. If the CPU microcode is too old, the coretemp driver won't work. But instead of failing gracefully, it currently oops. Check for NULL platform device data to avoid this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Durgadoss R <durgadoss.r@intel.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-11hwmon: (w83627ehf) Fix broken driver initGuenter Roeck
commit bfa02b0da66965caf46e441270af87edda4fea14 upstream. Commit 2265cef2 (hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor types) results in kernel panic if data->temp_label was not initialized. The problem was found with chip W83627DHG-P. Add check if data->temp->label was set before use. Based on incomplete patch by Alexander Beregalov. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-11hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor typesJean Delvare
commit 2265cef2751b3441df91f85e0107f9f549e5b711 upstream. When temperature sources are PECI or AMD-SI agents, it makes no sense to report their type as diode or thermistor. Instead we must report their digital nature. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-11hwmon: (coretemp) Fix for non-SMP buildsJean Delvare
commit 2aba6cac2a84f3b80e11a680c34d55e7739b474d upstream. The definition of TO_ATTR_NO in the non-SMP case is wrong. As the SMP definition resolves to the correct value, just use this for both cases. Without this fix the temperature attributes are named temp0_* instead of temp2_*, so libsensors won't pick them. Broken since kernel 3.0. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Phil Sutter <phil@nwl.cc> Acked-by: Durgadoss R <Durgadoss.r@intel.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-25hwmon: (w83627ehf) Fix negative 8-bit temperature valuesJean Delvare
commit 133d324d82e144588939ad25b732b5b6c33b03d9 upstream. Since 8-bit temperature values are now handled in 16-bit struct members, values have to be cast to s8 for negative temperatures to be properly handled. This is broken since kernel version 2.6.39 (commit bce26c58df86599c9570cee83eac58bdaae760e4.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-25hwmon: (w83627ehf) Properly report thermal diode sensorsJean Delvare
commit bf164c58e58328c40ebc597a8ac00cc6840f9703 upstream. The w83627ehf driver is improperly reporting thermal diode sensors as type 2, instead of 3. This caused "sensors" and possibly other monitoring tools to report these sensors as "transistor" instead of "thermal diode". Furthermore, diode subtype selection (CPU vs. external) is only supported by the original W83627EHF/EHG. All later models only support CPU diode type, and some (NCT6776F) don't even have the register in question so we should avoid reading from it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03hwmon: (ds620) Fix handling of negative temperaturesRoland Stigge
commit cc41d586e8b4d76164fe7731c1c49be6cc5fc7e6 upstream. Signed (negative) temperatures were not handled correctly. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-03hwmon: (max16065) Fix current calculationGuenter Roeck
commit ff71c182f461da5ae9d2d65f8a63f5a9193b9be1 upstream. Current calculation is completely wrong. Add missing brackets to fix it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-17hwmon: (ibmaem) add missing kfreeJulia Lawall
commit 66a89b2164e2d30661edbd1953eacf0594d8203a upstream. rs_resp is dynamically allocated in aem_read_sensor(), so it should be freed before exiting in every case. This collects the kfree and the return at the end of the function. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-17hwmon: (max1111) Fix race condition causing NULL pointer exceptionPavel Herrmann
spi_sync call uses its spi_message parameter to keep completion information, using a drvdata structure is not thread-safe. Use a mutex to prevent multiple access to shared driver data. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Cyril Hrubis <metan@ucw.cz> Tested-by: Stanislav Brabec <utx@penguin.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2011-07-17hwmon: (it87) Fix label group removalJean Delvare
A copy-and-paste error caused it87_attributes_vid to be referenced where it87_attributes_label should be. Thankfully the group is only used for attribute removal, not attribute creation, so the effects of this bug are limited, but let's fix it still. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-17hwmon: (asus_atk0110) Fix memory leakLuca Tettamanti
The object returned by atk_gitm is dynamically allocated and must be freed. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2011-07-15hwmon: (adm1275) Fix coefficients per datasheet revision BGuenter Roeck
Coefficients to convert chip register values to voltage/current have been slightly changed in revision B of the chip datasheet. Update driver coefficients to match the coefficients in the datasheet. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-07-12hwmon: (pmbus) Use long variables for register to data conversionsGuenter Roeck
Using integer variable types for register to data conversions can cause overflows especially for power calculations, which are in microwatt. Use long variables instead. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.39+
2011-07-10hwmon: (pmbus) Improve auto-detection of temperature status registerGuenter Roeck
It is possible that a PMBus device supports the READ_TEMPERATURE2 and/or READ_TEMPERATURE3 registers but does not support READ_TEMPERATURE1. Improve temperature status register detection to address this condition. Reported-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.39+
2011-07-10hwmon: (lm95241) Fix negative temperature resultsGuenter Roeck
Negative temperatures were returned in degrees C instead of milli-Degrees C. Also, negative temperatures were reported for remote temperature sensors even if the chip was configured for positive-only results. Fix by detecting temperature modes, and by treating negative temperatures similar to positive temperatures, with appropriate sign extension. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.30+
2011-07-08hwmon: (lm95241) Fix chip detection codeGuenter Roeck
The LM95241 driver accepts every chip ID equal to or larger than 0xA4 as its own, and other chips such as LM95245 use chip IDs in the accepted ID range. This results in false chip detection. Fix problem by accepting only the known LM95241 chip ID. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.30+
2011-07-03Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (k10temp) Update documentation for Fam12h hwmon-vid: Fix typo in VIA CPU name hwmon: (f71882fg) Add support for the F71869A hwmon: Use <> rather than () around my e-mail address hwmon: (emc6w201) Properly handle all errors
2011-07-03hwmon-vid: Fix typo in VIA CPU nameJean Delvare
It's Nehemiah, not Nemiah. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-03hwmon: (f71882fg) Add support for the F71869AHans de Goede
The F71869A is almost the same as the F71869F/E, except that it has the normal number of temp and pwm zones for a F71882FG derived chip, rather then the limited number of the F71869F/E. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Max Baldwin <archerseven@gmail.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-03hwmon: Use <> rather than () around my e-mail addressHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-03hwmon: (emc6w201) Properly handle all errorsJean Delvare
Handle errors on 8-bit register reads and writes too. Also use likely and unlikely to make the functions faster on success. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-01hwmon: (pmbus) Auto-detect temp2 and temp3 registers/attributesGuenter Roeck
Additional temperature attribute support is easy to detect, so do it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com> Cc: stable.kernel.org # 2.6.39
2011-07-01hwmon: (pmbus) Improve fan detectionGuenter Roeck
Some PMBus devices return no error when reading fan speed registers, but don't really support fans. Strengthen fan detection by also checking if fan configuration registers exist. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com> Cc: stable.kernel.org # 2.6.39
2011-07-01hwmon: (adm1275) Free allocated memory if probe function failsGuenter Roeck
Probe function did not free allocated memory if it failed. Fix it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-01hwmon: (pmbus) Drop check for PMBus revision register in probe functionGuenter Roeck
Some PMBus devices do not support the PMBus revision register, so don't check if it exists. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com> Cc: stable.kernel.org # 2.6.39
2011-06-17hwmon: (s3c) Initialize sysfs attributesGuenter Roeck
Initialize dynamically allocated sysfs attributes before device_create_file() call to suppress lockdep_init_map() warning if lockdep debugging is enabled. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.34+
2011-06-17hwmon: (ibmpex) Initialize sysfs attributesGuenter Roeck
Initialize dynamically allocated sysfs attributes before device_create_file() call to suppress lockdep_init_map() warning if lockdep debugging is enabled. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.34+
2011-06-17hwmon: (ibmaem) Initialize sysfs attributesGuenter Roeck
Initialize dynamically allocated sysfs attributes before device_create_file() call to suppress lockdep_init_map() warning if lockdep debugging is enabled. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.34+
2011-06-17hwmon: (asus_atk0110) Consolidate sysfs attribute initializationGuenter Roeck
Call sysfs_attr_init() from atk_init_attribute() to handle sysfs attribute initialization in a single function. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Luca Tettamanti <kronos.it@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-06-17hwmon: (coretemp) Drop unused struct membersJean Delvare
pdev_entry.cpu and pdev_entry.cpu_core_id aren't used anywhere in the driver code so we can drop these struct members. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-06-04hwmon: (max6642): Better chip detection schemaPer Dalén
Improve detection of MAX6642 by reading non existing registers (0x04, 0x06 and 0xff). Reading those registers returns the previously read value. Signed-off-by: Per Dalen <per.dalen@appeartv.com> [guenter.roeck@ericsson.com: added second set of register reads] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-06-01hwmon: (coretemp) Further relax temperature range checksGuenter Roeck
Further relax temperature range checks after reading the IA32_TEMPERATURE_TARGET register. If the register returns a value other than 0 in bits 16..32, assume that the returned value is correct. This change applies to both packet and core temperature limits. Cc: Carsten Emde <C.Emde@osadl.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Fenghua Yu <fenghua.yu@intel.com>
2011-06-01hwmon: (coretemp) Fix TjMax detection for older CPUsGuenter Roeck
Commit a321cedb12904114e2ba5041a3673ca24deb09c9 excludes CPU models 0xe, 0xf, 0x16, and 0x1a from TjMax temperature adjustment, even though several of those CPUs are known to have TiMax other than 100 degrees C, and even though the code in adjust_tjmax() explicitly handles those CPUs and points to a Web document listing several of the affected CPU IDs. Reinstate original TjMax adjustment if TjMax can not be determined using the IA32_TEMPERATURE_TARGET register. https://bugzilla.kernel.org/show_bug.cgi?id=32582 Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Huaxu Wan <huaxu.wan@linux.intel.com> Cc: Carsten Emde <C.Emde@osadl.org> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Yong Wang <yong.y.wang@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Fenghua Yu <fenghua.yu@intel.com> Tested-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@kernel.org> # .35.x .36.x .37.x .38.x .39.x
2011-06-01hwmon: (coretemp) Relax target temperature range checkJean Delvare
The current temperature range check of MSR_IA32_TEMPERATURE_TARGET seems too strict to me, some TjMax values documented in Documentation/hwmon/coretemp wouldn't pass. Relax the check so that all the documented values pass. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Carsten Emde <C.Emde@osadl.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-06-01hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_faultPer Dalen
The temp_fault sysfs attribute is wrong, it should be temp2_fault instead. Reported-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Per Dalen <per.dalen@appeartv.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-27hwmon: (coretemp) Fix section mismatchJean Delvare
chk_ucode_version() is only called from coretemp_probe() which is __devinit, so it can be marked __devinit too. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-27hwmon: (pmbus) Initialize sysfs attributesGuenter Roeck
Initialize sysfs attrs before device_create_file() call to suppress lockdep_init_map() warning: WARNING: at kernel/lockdep.c:2701 lockdep_init_map+0x12d/0x140() Reviewed-by: Robert Coulson <robert.coulson@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@kernel.org # .39.x
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-28 02:50:08 +0000