summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses/i2c-tegra.c
AgeCommit message (Collapse)Author
2016-09-08i2c: tegra: Fix assignment of boolean variablesJon Hunter
Fix the following warnings reported by coccinelle for the Tegra I2C driver. drivers/i2c/busses/i2c-tegra.c:513:2-23: WARNING: Assignment of bool to 0/1 drivers/i2c/busses/i2c-tegra.c:539:3-24: WARNING: Assignment of bool to 0/1 Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: tegra: proper handling of error casesShardar Shariff Md
To summarize the issue observed in error cases: SW Flow: For i2c message transfer, packet header and data payload is posted and then required error/packet completion interrupts are enabled later. HW flow: HW process the packet just after packet header is posted, if ARB lost/NACK error occurs (SW will not handle immediately when error happens as error interrupts are not enabled at this point). HW assumes error is acknowledged and clears current data in FIFO, But SW here posts the remaining data payload which still stays in FIFO as stale data (data without packet header). Now once the interrupts are enabled, SW handles ARB lost/NACK error by clearing the ARB lost/NACK interrupt. Now HW assumes that SW attended the error and will parse/process stale data (data without packet header) present in FIFO which causes invalid NACK errors. Fix: Enable the error interrupts before posting the packet into FIFO which make sure HW to not clear the fifo. Also disable the packet mode before acknowledging errors (ARB lost/NACK error) to not process any stale data. As error interrupts are enabled before posting the packet header use spinlock to avoid preempting. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: tegra: use atomic poll function during configurationShardar Shariff Md
Use readl_poll_timeout_atomic() function as *wait_for_config_load() function can be called from interrupt context. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: tegra: add separate function for config_load programingShardar Shariff Md
Define separate function for configuration load register handling to make it use by different functions later. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: tegra: If fifo flush fails return errorShardar Shariff Md
During i2c controller initialization, when fifo flush fails return error instead of returning the error during exit. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: tegra: use readl_poll_timeout after config_load reg programmedShardar Shariff Md
After CONFIG_LOAD register is programmed instead of explicitly waiting for timeout, use readl_poll_timeout() to check for register value to get updated or wait till timeout. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Add pinctrl supportJon Hunter
On Tegra124/132 the pins for I2C6 are shared with the Display Port AUX (DPAUX) channel and on Tegra210 the pins for I2C4 and I2C6 are shared with DPAUX1 and DPAUX0, respectively. The multiplexing of the pins is handled by a register in the DPAUX and so the Tegra DPAUX driver has been updated to register a pinctrl device for managing these pins. The pins for these particular I2C devices are bound to the I2C device prior to probing. However, these I2C devices are in a different power partition to the DPAUX devices that own the pins. Hence, it is desirable to place the pins in the 'idle' state and allow the DPAUX power partition to switch off, when these I2C devices is not in use. Therefore, add calls to place the I2C pins in the 'default' and 'idle' states when the I2C device is runtime resumed and suspended, respectively. Please note that the pinctrl functions that set the state of the pins check to see if the devices has pins associated and will return zero if they do not. Therefore, it is safe to call these pinctrl functions even for I2C devices that do not have any pins associated. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Add runtime power-management supportJon Hunter
Update the Tegra I2C driver to use runtime PM and move the code in the tegra_i2c_clock_enable/disable() functions to the PM runtime resume and suspend callbacks, respectively. Note that given that CONFIG_PM is not mandatory for Tegra, if CONFIG_PM is not enabled and so runtime PM is not enabled, ensure that the I2C clocks are turned on during probe and kept on by calling the resume callback directly. In the function tegra_i2c_init(), the variable 'err' does not need to be initialised to zero in tegra_i2c_init() because it is initialised when pm_runtime_get_sync() is called. Furthermore, to ensure we only return 0 from tegra_i2c_init(), it is necessary to re-initialise 'err' to 0 after a successful call to pm_runtime_get_sync() because it can return a positive value on success. However, alternatively re-initialise 'err' by using the return value of the function tegra_i2c_flush_fifos() because it can only be 0 or -ETIMEDOUT. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Simplify I2C resumeJon Hunter
The I2C adapter is unlocked regardless of whether the tegra_i2c_init() called during the resume is successful or not. However, if the tegra_i2c_init() is not successful, then ->is_suspended is not set to false. Simplify the resume code by only setting ->is_suspended to false if tegra_i2c_init() is successful and return the error code from tegra_i2c_init(). Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Use device name for adapter nameJon Hunter
All Tegra I2C devices have the name "Tegra I2C adapter" which is not very useful when viewing the I2C adapter names via the sysfs. Therefore, use the device name, which is unique for each I2C device, instead. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Remove non device-tree supportJon Hunter
Tegra has only supported device-tree for platform/board configuration for quite some time now and so simplify the Tegra I2C driver by dropping code for non device-tree platforms/boards. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Add missing new line charactersJon Hunter
Add missing new line characters for the various error messages. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Fix missing blank lines after declarationsJon Hunter
Checkpatch warns about missing blank lines after declarations in the Tegra I2C driver and so fix these. Note that the initialisation of 'val' to zero in tegra_dvc_init() is unnecessary and so remove this. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Use BIT macroJon Hunter
Checkpatch warns about spacing around the '<<' operator in the Tegra I2C driver and so fix these by converting the bit definitions that are using this operator to use the BIT macro. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-30i2c: tegra: Fix lines over 80 charactersJon Hunter
Checkpatch warns about some lines over 80 characters in the Tegra I2C driver and so fix these. While we are at it, prefix the second instance of "STOP condition" in the comment with a "the". Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-08-22i2c: don't print error when adding adapter failsWolfram Sang
The core will do this for us now. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-07-06i2c: tegra: Correct error path in probeJon Hunter
Commit 497fbe24987b ("i2c: tegra: enable multi master mode for tegra210") enables the Tegra I2C 'div_clk' for adapters using the multi-master mode during the device probe. Although the probe error path was updated to disable the clock on probe failure, there is one place after calling tegra_i2c_init() where the clock will not be disabled on failure. Correct the error path so that the 'div_clk' is disabled if calling tegra_i2c_init() fails. Fixes: 497fbe24987b ("i2c: tegra: enable multi master mode for tegra210") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-05-11i2c: tegra: disable clock before returning errorShardar Shariff Md
Disable clock before returning error in tegra_i2c_init() as its leaves i2c clock ON in case of error and never turns off again as it will have unbalanced clock enable/disable Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-12i2c: tegra: enable multi master mode for tegra210Shardar Shariff Md
Enable multi-master mode in I2C_CNFG reg based on hw features. Using single/multi-master mode bit introduced for Tegra210, whereas multi-master mode is enabled by default in HW for T124 and earlier Tegra SOC. Enabling this bit doesn't explicitly start treating the bus has having multiple masters, but will start checking for arbitration lost and reporting when it occurs. The Tegra210 I2C controller supports single/multi master mode. Add chipdata for Tegra210 and its compatibility string so that Tegra210 will select data that enables multi master mode correctly. Do below prerequisites for multi-master bus if "multi-master" dt property entry is added. 1. Enable 1st level clock always set. 2. Disable 2nd level clock gating (slcg which is supported from T124 SOC and later chips) Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-02-24i2c: tegra: don't open code of_device_get_match_data()Wolfram Sang
This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Laxman Dewangan <ldewangan@nvidia.com>
2015-10-20i2c: tegra: drop duplicated code for assigning algoBarry Song
This code is repeated in probe: i2c_dev->adapter.algo = &tegra_i2c_algo; Cc: Donglin Peng <pengdonglin137@163.com> Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: tegra: add support for fast plus (FM+) mode clock rateLaxman Dewangan
Tegra I2C controller required to configure the clock divisor register inside controller to different value based on the clock speed. The recommended clock divisor for the I2C controller for standard/fast mode is 0x19 and for fast-mode plus is 0x10. Add support to configure clock divisor register of I2C controller based on bus clock rate. This clock divisor is supported form T114 onwards. Signed-off-by: Chaitanya Bandi <bandik@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10i2c: tegra: update CONFIG_LOAD for new conifigurationLaxman Dewangan
Once the new configuration is set on the conifg register of I2C controller, it is require to update the CONFIG_LOAD register to transfer the new SW configuration to actual HW internal registers that would be used in the actual logic. It is like, SW is programming only shadow registers through regular configuration and when these load_config bit fields are set to 1, it causes the regular/shadows registers configuration transferred to the HW internal active registers. So SW has to set these bit fields at the end of all regular registers configuration. And these config_load bits are HW auto-clear bits. HW clears these bit fields once the register configuration is moved to HW internal active registers. So SW has to wait until these bits are auto-cleared before going for any further programming This mechanism is supported on T124 and after this SoCs. Signed-off-by: Chaitanya Bandi <bandik@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-06-21i2c: tegra: apply size limit quirkWolfram Sang
payload_size is a 12 bit field in the HW register, so add a limit for this size. That way we gracefully reject the message beforehand instead of generating an OOPS while transferring. Verified using some older Tegra2 documentation and a more recent Jetson TK1 board. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
2015-06-21i2c: tegra: don't advertise SMBUS_QUICKWolfram Sang
This HW cannot send 0-byte-length messages and the driver discards them. So, we should not advertise SMBUS_QUICK. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-03-15i2c: tegra: match return type of wait_for_completion_timeoutNicholas Mc Guire
return type of wait_for_completion_timeout is unsigned long not int. As ret was only used for wait_for_completion_timeout here it is renamed to time_left the type changed to unsigned long and references fixed up. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-26i2c: tegra: Maintain CPU endiannessDmitry Osipenko
Support CPU BE mode by adding endianness conversion for memcpy interactions. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20i2c: busses: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-20i2c: tegra: Move clk_prepare/clk_set_rate to probeMikko Perttunen
Currently the i2c-tegra bus driver prepares, enables and set_rates its clocks separately for each transfer. This causes locking problems when doing I2C transfers from clock notifiers; see http://lists.infradead.org/pipermail/linux-arm-kernel/2014-July/268653.html This patch moves clk_prepare/unprepare and clk_set_rate calls to the probe function, leaving only clk_enable/disable to be done on each transfer. This solves the locking issue. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-16i2c: i2c-tegra: Drop class based scanning to improve bootup timeWolfram Sang
This driver has been flagged to drop class based instantiation. The removal improves boot-up time and is unneeded for embedded controllers. Users have been warned to switch for some time now, so we can actually do the removal. Keep the DEPRECATED flag, so the core can inform users that the behaviour finally changed now. After another transition period, this flag can go, too. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com>
2014-06-02i2c: remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. For example, k.alloc and v.alloc failures use dump_stack(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-03-05i2c: i2c-tegra: deprecate class based instantiationWolfram Sang
Warn users that class based instantiation is going away soon in favour of more robust probing and faster bootup times. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-12-11i2c: tegra: use reset frameworkStephen Warren
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23i2c: move OF helpers into the coreWolfram Sang
I2C of helpers used to live in of_i2c.c but experience (from SPI) shows that it is much cleaner to have this in the core. This also removes a circular dependency between the helpers and the core, and so we can finally register child nodes in the core instead of doing this manually in each driver. So, fix the drivers and documentation, too. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-05-18drivers/i2c/busses: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Barry Song <Baohua.Song@csr.com>
2013-03-24i2c: tegra: assume CONFIG_OF, remove platform dataStephen Warren
Tegra only supports, and always enables, device tree. Remove all ifdefs and runtime checks for DT support from the driver. Platform data is therefore no longer required. Delete the header that defines it. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-03-22i2c: tegra: check the clk_prepare_enable() return valueLaxman Dewangan
NVIDIA's Tegra SoC allows read/write of controller register only if controller clock is enabled. System hangs if read/write happens to registers without enabling clock. clk_prepare_enable() can be fail due to unknown reason and hence adding check for return value of this function. If this function success then only access register otherwise return to caller with error. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2013-02-26Merge branch 'i2c/for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Highlights: - new drivers for Intel ismt & Broadcom bcm2835 - a number of drivers got support for more variants and mostly got cleaned up on the way (sis630, i801, at91, tegra, designware) - i2c got rid of all *_set_drvdata(..., NULL) on remove/probe failure - removed the i2c_smbus_process_call from the core since there are no users - mxs can now switch between PIO and DMA depending on the message size and the bus speed can now be arbitrary In addition, there is the usual bunch of fixes, cleanups, devm_* conversions, etc" Fixed conflict (and buggy devm_* conversion) in i2c-s3c2410.c * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (39 commits) i2c: Remove unneeded xxx_set_drvdata(..., NULL) calls i2c: pxa: remove incorrect __exit annotations i2c: ocores: Fix pointer to integer cast warning i2c: tegra: remove warning dump if timeout happen in transfer i2c: fix i2c-ismt.c printk format warning i2c: i801: Add Device IDs for Intel Wellsburg PCH i2c: add bcm2835 driver i2c: ismt: Add Seth and Myself as maintainers i2c: sis630: checkpatch cleanup i2c: sis630: display unsigned hex i2c: sis630: use hex to constants for SMBus commands i2c: sis630: fix behavior after collision i2c: sis630: clear sticky bits i2c: sis630: Add SIS964 support i2c: isch: Add module parameter for backbone clock rate if divider is unset i2c: at91: fix unsed variable warning when building with !CONFIG_OF i2c: Adding support for Intel iSMT SMBus 2.0 host controller i2c: sh_mobile: don't send a stop condition by default inside transfers i2c: sh_mobile: eliminate an open-coded "goto" loop i2c: sh_mobile: fix timeout error handling ...
2013-02-21Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
2013-02-15i2c: tegra: remove warning dump if timeout happen in transferLaxman Dewangan
If timeout error occurs in the i2c transfer then it was dumping warning of call stack. Remove the warning dump as there is may be possibility that some slave devices are busy and not responding the i2c communication. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
2013-01-28ARM: tegra: migrate to new clock codePrashant Gaikwad
Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28i2c: tegra: add support for Tegra114 SoCLaxman Dewangan
NVIDIA's Tegra114 has following enhanced feature in i2c controller: - Enable/disable control for per packet transfer complete interrupt. Earlier SoCs could not disable this. - Single clock source for standard/fast and HS mode clock speed. The clock divisor for fast/standard mode is added into the i2c controller to meet the HS and standard/fast mode of clock speed from single source. Add support for the above feature to make it functional on T114 SOCs. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2013-01-24i2c: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22i2c: remove __dev* attributes from subsystemBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> (for ocores and mux-gpio) Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> (for i2c-gpio) Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> (for puf3) Acked-by: Barry Song <baohua.song@csr.com> (for sirf) Reviewed-by: Jean Delvare <khali@linux-fr.org> [wsa: Fixed "foo* bar" flaws while we are here] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-11-02i2c: tegra: set irq name as device nameLaxman Dewangan
When watching the irqs name of tegra i2c, all instances irq name shows as tegra_i2c. Passing the device name properly to have the irq names with instance like tegra-i2c.0, tegra-i2c.1 etc. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-13i2c: tegra: dynamically control fast clkLaxman Dewangan
Tegra I2C driver enables the fast clock during initialization and does not disable till driver removed. Enable this clock before transfer and disable after transfer done. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-13i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20Laxman Dewangan
Tegra20 i2c controller does not support the continue transfer which implements the I2C_M_NOSTART functionality of i2c protocol mangling. Removing the I2C_M_NOSTART functionality support for Tegra20. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-13i2c: tegra: pass proper name for getting clockLaxman Dewangan
Tegra's i2c controller require two clock sources named as div_clk and fast_clk. This change make sure that driver pass the correct clock's name when it acquires clock handle. Also change the variable name to reflect the correct clock handles. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-18i2c: tegra: protect suspend/resume callbacks with CONFIG_PM_SLEEPLaxman Dewangan
The CONFIG_PM doesn't actually enable any of the PM callbacks, it only allows to enable CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME. This means if CONFIG_PM is used to protect system sleep callbacks then it may end up unreferenced if only runtime PM is enabled. Hence protecting sleep callbacks with CONFIG_PM_SLEEP. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-14 13:35:17 +0000