| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- Second part of rtl9300 updates since dependencies are in now:
- general cleanups
- implement block read/write support
- add RTL9310 support
- DT schema conversion of hix5hd2 binding
- namespace cleanup for i2c-algo-pca
- minor simplification for mt65xx
* tag 'i2c-for-6.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: hisilicon,hix5hd2: convert to DT schema
i2c: mt65xx: convert set_speed function to void
i2c: rename wait_for_completion callback to wait_for_completion_cb
i2c: rtl9300: add support for RTL9310 I2C controller
dt-bindings: i2c: realtek,rtl9301-i2c: extend for RTL9310 support
i2c: rtl9300: use scoped guard instead of explicit lock/unlock
i2c: rtl9300: separate xfer configuration and execution
i2c: rtl9300: do not set read mode on every transfer
i2c: rtl9300: move setting SCL frequency to config_io
i2c: rtl9300: rename internal sda_pin to sda_num
dt-bindings: i2c: realtek,rtl9301-i2c: fix wording and typos
i2c: rtl9300: use regmap fields and API for registers
i2c: rtl9300: Implement I2C block read and write
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
|
|
cppcheck rightfully reports:
drivers/i2c/busses/i2c-mt65xx.c:1464:6: warning: Condition 'ret' is always false [knownConditionTrueFalse]
Make the function void and simplify the code.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Functionally no change. Remove the ambiguity of 'wait_for_completion'.
It helps development of the DEPT dependency tracker, but seems favorable
in any case.
Signed-off-by: Byungchul Park <byungchul@sk.com>
[wsa: reworded commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.18, part 2
rtl9300 updates:
- general cleanups
- implemented block read/write support
- added RTL9310 support
|
|
Add support for the internal I2C controllers of RTL9310 series based
SoCs to the driver for RTL9300. Add register definitions, chip-specific
functions and compatible strings for known RTL9310-based SoCs RTL9311,
RTL9312 and RTL9313.
Make use of a new device tree property 'realtek,scl' which needs to be
specified in case both or only the second master is used. This is
required due how the register layout changed in contrast to RTL9300,
which has SCL selection in a global register instead of a
master-specific one.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-10-jelonek.jonas@gmail.com
|
|
Use the scoped guard infrastructure which unlocks a mutex automatically
when the guard goes out of scope, instead of explicit lock and unlock.
This simplifies the code and control flow in rtl9300_i2c_smbus_xfer and
removes the need of using goto in error cases to unlock before
returning.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-8-jelonek.jonas@gmail.com
|
|
So far, the rtl9300_i2c_smbus_xfer code is quite a mess with function
calls distributed over the whole function setting different values in
different cases. Calls to rtl9300_i2c_config_xfer and
rtl9300_i2c_reg_addr_set are used in every case-block with varying
values whose meaning is not instantly obvious. In some cases, there are
additional calls within these case-blocks doing more things.
This is in general a bad design and especially really bad for
readability and maintainability because it distributes changes or
issues to multiple locations due to the same function being called with
different hardcoded values in different places.
To have a good structure, setting different parameters based on the
desired operation should not be interleaved with applying these
parameters to the hardware registers. Or in different words, the
parameter site should be mixed with the call site.
Thus, separate configuration and execution of an SMBus xfer within
rtl9300_i2c_smbus_xfer to improve readability and maintainability. Add a
new 'struct rtl9300_i2c_xfer' to carry the required parameters for an
xfer which are configured based on the input parameters within a single
switch-case block, without having any function calls within this block.
The function calls to actually apply these values to the hardware
registers then appear below in a single place and just operate on the
passed instance of 'struct rtl9300_i2c_xfer'. These are
'rtl9300_i2c_prepare_xfer' which combines applying all parameters of the
xfer to the corresponding register, and 'rtl9300_i2c_do_xfer' which
actually executes the xfer and does post-processing if needed.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-7-jelonek.jonas@gmail.com
|
|
Move the operation to set the read mode from config_xfer to probe.
The I2C controller of RTL9300 and RTL9310 support a legacy message mode
for READs with 'Read Address Data' instead of the standard format 'Write
Address ; Read Data'. There is no way to pass that via smbus_xfer, thus
there is no point in supported this in the driver and moreover no point
in setting this on every transaction. Setting this once in the probe
call is sufficient.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-6-jelonek.jonas@gmail.com
|
|
Move the register operation to set the SCL frequency to the
rtl9300_i2c_config_io function instead of the rtl9300_i2c_config_xfer
function. This rather belongs there next to selecting the current SDA
output line.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-5-jelonek.jonas@gmail.com
|
|
Rename the internally used 'sda_pin' to 'sda_num' to make it clear that
this is NOT the actual pin number of the GPIO pin but rather the logical
SDA channel number. Although the alternate function SDA_Y is sometimes
given with the GPIO number, this is not always the case. Thus, avoid any
confusion or misconfiguration by giving the variable the correct name.
This follows the description change in the devicetree bindings.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-4-jelonek.jonas@gmail.com
|
|
Adapt the RTL9300 I2C controller driver to use more of the regmap
API, especially make use of reg_field and regmap_field instead of macros
to represent registers. Most register operations are performed through
regmap_field_* API then.
Handle SCL selection using separate chip-specific functions since this
is already known to differ between the Realtek SoC families in such a
way that this cannot be properly handled using just a different
reg_field.
This makes it easier to add support for newer generations or to handle
differences between specific revisions within a series. Just by
defining a separate driver data structure with the corresponding
register field definitions and linking it to a new compatible.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-2-jelonek.jonas@gmail.com
|
|
It was noticed that the original implementation of SMBus Block Write in the
driver was actually an I2C Block Write. Both differ only in the Count byte
before the actual data:
S Addr Wr [A] Comm [A] Count [A] Data [A] Data [A] ... [A] Data [A] P
The I2C Block Write is just skipping this Count byte and starts directly
with the data:
S Addr Wr [A] Comm [A] Data [A] Data [A] ... [A] Data [A] P
The I2C controller of RTL93xx doesn't handle this Count byte special and it
is simply another one of (16 possible) data bytes. Adding support for the
I2C Block Write therefore only requires skipping the count byte (0) in
data->block.
It is similar for reads. The SMBUS Block read is having a Count byte before
the data:
S Addr Wr [A] Comm [A]
Sr Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P
And the I2C Block Read is directly starting with the actual data:
S Addr Wr [A] Comm [A]
Sr Addr Rd [A] [Data] A [Data] A ... A [Data] NA P
The I2C controller is also not handling this byte in a special way. It
simply provides every byte after the Rd marker + Ack as part of the 16 byte
receive buffer (registers). The content of this buffer just has to be
copied to the right position in the receive data->block.
Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
Co-developed-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/all/20250927-i2c-rtl9300-multi-byte-v7-2-c0fd0e78b818@narfation.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Mostly DT bindings additions this time because Andi was super busy and
I also could only partly cover it.
- new ids for qcom-cci, mt65xx, exynos5, apple, tegra20, k1, i801
- drop support for already removed S3C2410
- introduce and use fwnode_for_each_child_node_scoped()
- mmt65xx: improve write-then-read transactions
- k1: various fixes around bus errors and resets
- usual share of cleanups, minor improvements, PM fixes...
at24 updates:
- add the compatible for Giantec GT24C256C to the device-tree
bindings"
* tag 'i2c-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (33 commits)
i2c: i801: Add support for Intel Wildcat Lake-U
dt-bindings: i2c: i2c-mt65xx: Add MediaTek MT8196/6991 compatibles
i2c: designware: Add disabling clocks when probe fails
i2c: designware: Fix clock issue when PM is disabled
i2c: busses: Fix some spelling errors
i2c: mux: Simplify boolean assignment in i2c_mux_alloc
i2c: designware: use dev_err_probe() when probing platform device
i2c: designware: convert to dev_err_probe() on request IRQ error
i2c: spacemit: ensure SDA is released after bus reset
i2c: spacemit: check SDA instead of SCL after bus reset
i2c: spacemit: disable SDA glitch fix to avoid restart delay
i2c: spacemit: remove stop function to avoid bus error
i2c: spacemit: ensure bus release check runs when wait_bus_idle() fails
i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD
i2c: boardinfo: Annotate code used in init phase only
dt-bindings: i2c: i2c-mt65xx: Document MediaTek MT6878 I2C
dt-bindings: i2c: samsung,s3c2410-i2c: Drop S3C2410
i2c: s3c2410: Drop S3C2410 OF support
dt-bindings: i2c: spacemit,k1-i2c: Minor whitespace cleanup in example
dt-bindings: i2c: exynos5: add samsung,exynos8890-hsi2c compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and support for more models in existing
ones.
The generic GPIO API has been reworked and all users converted
which allowed us to move the fields specific to the generic GPIO
implementation out of the high-level struct gpio_chip into its own
structure that wraps the gpio_chip.
Other than that, there's nothing too exciting. Mostly minor tweaks and
fixes all over the place, some refactoring and some small new features
in helper modules.
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and
pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder
API to other in-kernel users (to enable merging of a new pinctrl
driver that uses it)
- convert all remaining drivers to using the modernized generic GPIO
chip API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve
its support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO
drivers that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better
readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled
with COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding"
* tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (122 commits)
gpio: mpfs: fix setting gpio direction to output
gpio: generic: move GPIO_GENERIC_ flags to the correct header
gpio: generic: rename BGPIOF_ flags to GPIO_GENERIC_
gpio: nomadik: fix the debugfs helper stub
MAINTAINERS: Add entry on MAX7360 driver
input: misc: Add support for MAX7360 rotary
input: keyboard: Add support for MAX7360 keypad
gpio: max7360: Add MAX7360 gpio support
gpio: regmap: Allow to provide init_valid_mask callback
gpio: regmap: Allow to allocate regmap-irq device
pwm: max7360: Add MAX7360 PWM support
pinctrl: Add MAX7360 pinctrl driver
mfd: Add max7360 support
dt-bindings: mfd: gpio: Add MAX7360
rtc: Add Nuvoton NCT6694 RTC support
hwmon: Add Nuvoton NCT6694 HWMON support
watchdog: Add Nuvoton NCT6694 WDT support
can: Add Nuvoton NCT6694 CANFD support
i2c: Add Nuvoton NCT6694 I2C support
gpio: Add Nuvoton NCT6694 GPIO support
...
|
|
Add SMBus IDs on Intel Wildcat Lake-U.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
While applying the patch for commit ede965fd555a ("i2c: rtl9300: remove
broken SMBus Quick operation support"), a conflict was incorrectly solved
by adding the I2C_FUNC_SMBUS_I2C_BLOCK feature flag. But the code to handle
I2C_SMBUS_I2C_BLOCK_DATA requests will be added by a separate commit.
Fixes: ede965fd555a ("i2c: rtl9300: remove broken SMBus Quick operation support")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.18
- Add support for MediaTek MT6878 I2C
- Drop support for S3C2410
|
|
After an error occurs during probing state, dw_i2c_plat_pm_cleanup() is
called. However, this function doesn't disable clocks and the clock-enable
count keeps increasing. Should disable these clocks explicitly.
Fixes: 7272194ed391f ("i2c-designware: add minimal support for runtime PM")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
When the driver is removed, the clocks are first enabled by
calling pm_runtime_get_sync(), and then disabled with
pm_runtime_put_sync().
If CONFIG_PM=y, clocks for this controller are disabled when it's in
the idle state. So the clocks are properly disabled when the driver
exits.
Othewise, the clocks are always enabled and the PM functions have
no effect. Therefore, the driver exits without disabling the clocks.
# cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
18
# echo 1214a000.i2c > /sys/bus/platform/drivers/i2c_designware/bind
# cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
20
# echo 1214a000.i2c > /sys/bus/platform/drivers/i2c_designware/unbind
# cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
20
To ensure that the clocks can be disabled correctly even without
CONFIG_PM=y, should add the following fixes:
- Replace with pm_runtime_put_noidle(), which only decrements the runtime
PM usage count.
- Call i2c_dw_prepare_clk(false) to explicitly disable the clocks.
Fixes: 7272194ed391f ("i2c-designware: add minimal support for runtime PM")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Fix spelling errors in some comments.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Add calls to dev_err_probe() on error paths that can return
-EPROBE_DEFER when probing platform device. Namely when requesting the
reset controller, when probing for lock support and when requesting the
clocks.
PCI device probing already use dev_err_probe().
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Simplify the error handling of devm_request_irq() in
i2c_dw_probe_master() and i2c_dw_probe_slave() by converting to:
return dev_err_probe();
instead of calling:
dev_err();
return ret;
This also handle deferred probe error without spamming the log.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
After performing a conditional bus reset, the controller must ensure
that the SDA line is actually released.
Previously, the reset routine only performed a single check,
which could leave the bus in a locked state in some situations.
This patch introduces a loop that toggles the reset cycle and issues
a reset request up to SPACEMIT_BUS_RESET_CLK_CNT_MAX times, checking
SDA after each attempt. If SDA is released before the maximum count,
the function returns early. Otherwise, a warning is emitted.
This change improves bus recovery reliability.
Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
After calling spacemit_i2c_conditionally_reset_bus(),
the controller should ensure that the SDA line is release
before proceeding.
Previously, the driver checked the SCL line instead,
which does not guarantee that the bus is truly idle.
This patch changes the check to verify SDA. This ensures
proper bus recovery and avoids potential communication errors
after a conditional reset.
Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The K1 I2C controller has an SDA glitch fix that introduces a small
delay on restart signals. While this feature can suppress glitches
on SDA when SCL = 0, it also delays the restart signal, which may
cause unexpected behavior in some transfers.
The glitch itself does not affect normal I2C operation, because
the I2C specification allows SDA to change while SCL is low.
To ensure correct transmission for every message, we disable the
SDA glitch fix by setting the RCR.SDA_GLITCH_NOFIX bit during
initialization.
This guarantees that restarts are issued promptly without
unintended delays.
Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Previously, STOP handling was split into two separate steps:
1) clear TB/STOP/START/ACK bits
2) issue STOP by calling spacemit_i2c_stop()
This left a small window where the control register was updated
twice, which can confuse the controller. While this race has not
been observed with interrupt-driven transfers, it reliably causes
bus errors in PIO mode.
Inline the STOP sequence into the IRQ handler and ensure that
control register bits are updated atomically in a single writel().
Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
spacemit_i2c_wait_bus_idle() only returns 0 on success or a negative
error code on failure.
Since 'ret' can never be positive, the final 'else' branch was
unreachable, and spacemit_i2c_check_bus_release() was never called.
This commit guarantees we attempt to release the bus whenever waiting for
an idle bus fails.
Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The old IC does not support the I2C_MASTER_WRRD (write-then-read)
function, but the current code’s handling of i2c->auto_restart may
potentially lead to entering the I2C_MASTER_WRRD software flow,
resulting in unexpected bugs.
Instead of repurposing the auto_restart flag, add a separate flag
to signal I2C_MASTER_WRRD operations.
Also fix handling of msgs. If the operation (i2c->op) is
I2C_MASTER_WRRD, then the msgs pointer is incremented by 2.
For all other operations, msgs is simply incremented by 1.
Fixes: b2ed11e224a2 ("I2C: mediatek: Add driver for MediaTek MT8173 I2C controller")
Signed-off-by: Leilk.Liu <leilk.liu@mediatek.com>
Suggested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Samsung S3C2410 SoC was removed from the Linux kernel in the
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of "samsung,s3c2410-i2c" compatible.
However, there is still a user of "s3c2410-i2c" platform device ID,
S3C64xx platform, so that part needs to stay.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250830103601.82046-3-krzysztof.kozlowski@linaro.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm device driver updates for v6.18
Introduce support for loading firmware into the QUP serial engines from
Linux, which allows deferring selection of which protocol (uart, i2c,
spi, etc) a given SE should have until the OS loads.
Also introduce the "object invoke" interface in the SCM driver, to
provide interface to the Qualcomm TEE driver.
* tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
firmware: qcom: scm: add support for object invocation
firmware: qcom: tzmem: export shm_bridge create/delete
Link: https://lore.kernel.org/r/20250921020225.595403-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The MR1.CKS field is 3 bits wide and all the possible values (from 0 to
7) are valid. This is true for all the SoCs currently integrated in
upstream Linux. Take into account CKS=7 which allows setting bus
frequencies lower than 50KHz. This may be useful at least for debugging.
Fixes: d982d6651419 ("i2c: riic: remove clock and frequency restrictions")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Pull changes from the immutable branch between MFD, GPIO, HWMON, I2C,
CAN, RTC and Watchdog trees containing GPIO support for Nuvoton NCT6694.
|
|
Add provision to load firmware of Serial engine for I2C protocol from
Linux Execution Environment on running on APPS processor.
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Co-developed-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
Signed-off-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250911043256.3523057-5-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This driver supports I2C adapter functionality for NCT6694 MFD
device based on USB interface.
Each I2C controller uses the default baudrate of 100kHz, which
can be overridden via module parameters.
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-4-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/drivers
Microchip ARM64 SoC updates for v6.18:
This update includes:
- basic infrastructure support for Microchip LAN969x SoC
- SoC ARCH symbols (existing SparX-5, new LAN969x) under the
ARCH_MICROCHIP hidden symbol (already in use by AT91 in 6.17)
- addition of that new symbol for drivers that are shared by
Microchip SoC-s now and in the future
* tag 'microchip-soc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
crypto: atmel-aes: make it selectable for ARCH_MICROCHIP
char: hw_random: atmel: make it selectable for ARCH_MICROCHIP
i2c: at91: make it selectable for ARCH_MICROCHIP
spi: atmel: make it selectable for ARCH_MICROCHIP
tty: serial: atmel: make it selectable for ARCH_MICROCHIP
mfd: at91-usart: Make it selectable for ARCH_MICROCHIP
arm64: lan969x: Add support for Microchip LAN969x SoC
arm64: Add config for Microchip SoC platforms
Link: https://lore.kernel.org/r/20250915123548.13722-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add compatible and the hardware struct for Tegra256. Tegra256 controllers
use a different parent clock. Hence the timing parameters are different
from the previous generations to meet the expected frequencies.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Add a a driver for the I2C auxbus child device of the Intel USBIO USB
IO-expander used by the MIPI cameras on various new (Meteor Lake and
later) Intel laptops.
Co-developed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250911181343.77398-4-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
LAN969x uses the Atmel TWI I2C, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Remove the SMBus Quick operation from this driver because it is not
natively supported by the hardware and is wrongly implemented in the
driver.
The I2C controllers in Realtek RTL9300 and RTL9310 are SMBus-compliant
but there doesn't seem to be native support for the SMBus Quick
operation. It is not explicitly mentioned in the documentation but
looking at the registers which configure an SMBus transaction, one can
see that the data length cannot be set to 0. This suggests that the
hardware doesn't allow any SMBus message without data bytes (except for
those it does on it's own, see SMBus Block Read).
The current implementation of SMBus Quick operation passes a length of
0 (which is actually invalid). Before the fix of a bug in a previous
commit, this led to a read operation of 16 bytes from any register (the
one of a former transaction or any other value.
This caused issues like soft-bricked SFP modules after a simple probe
with i2cdetect which uses Quick by default. Running this with SFP
modules whose EEPROM isn't write-protected, some of the initial bytes
are overwritten because a 16-byte write operation is executed instead of
a Quick Write. (This temporarily soft-bricked one of my DAC cables.)
Because SMBus Quick operation is obviously not supported on these
controllers (because a length of 0 cannot be set, even when no register
address is set), remove that instead of claiming there is support. There
also shouldn't be any kind of emulated 'Quick' which just does another
kind of operation in the background. Otherwise, specific issues occur
in case of a 'Quick' Write which actually writes unknown data to an
unknown register.
Fixes: c366be720235 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250831100457.3114-4-jelonek.jonas@gmail.com
|
|
Add an explicit check for the xfer length to 'rtl9300_i2c_config_xfer'
to ensure the data length isn't within the supported range. In
particular a data length of 0 is not supported by the hardware and
causes unintended or destructive behaviour.
This limitation becomes obvious when looking at the register
documentation [1]. 4 bits are reserved for DATA_WIDTH and the value
of these 4 bits is used as N + 1, allowing a data length range of
1 <= len <= 16.
Affected by this is the SMBus Quick Operation which works with a data
length of 0. Passing 0 as the length causes an underflow of the value
due to:
(len - 1) & 0xf
and effectively specifying a transfer length of 16 via the registers.
This causes a 16-byte write operation instead of a Quick Write. For
example, on SFP modules without write-protected EEPROM this soft-bricks
them by overwriting some initial bytes.
For completeness, also add a quirk for the zero length.
[1] https://svanheule.net/realtek/longan/register/i2c_mst1_ctrl2
Fixes: c366be720235 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250831100457.3114-3-jelonek.jonas@gmail.com
|
|
Fix the current check for number of channels (child nodes in the device
tree). Before, this was:
if (device_get_child_node_count(dev) >= RTL9300_I2C_MUX_NCHAN)
RTL9300_I2C_MUX_NCHAN gives the maximum number of channels so checking
with '>=' isn't correct because it doesn't allow the last channel
number. Thus, fix it to:
if (device_get_child_node_count(dev) > RTL9300_I2C_MUX_NCHAN)
Issue occured on a TP-Link TL-ST1008F v2.0 device (8 SFP+ ports) and fix
is tested there.
Fixes: c366be720235 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250831100457.3114-2-jelonek.jonas@gmail.com
|
|
Hide the Intel Birch Stream SoC TCO WDT feature since it was removed.
On platforms with PCH TCO WDT, this redundant device might be rendering
errors like this:
[ 28.144542] sysfs: cannot create duplicate filename '/bus/platform/devices/iTCO_wdt'
Fixes: 8c56f9ef25a3 ("i2c: i801: Add support for Intel Birch Stream SoC")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220320
Signed-off-by: Chiasheng Lee <chiasheng.lee@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250901125943.916522-1-chiasheng.lee@linux.intel.com
|
|
The expected on-wire format of an SMBus Block Write is
S Addr Wr [A] Comm [A] Count [A] Data [A] Data [A] ... [A] Data [A] P
Everything starting from the Count byte is provided by the I2C subsystem in
the array data->block. But the driver was skipping the Count byte
(data->block[0]) when sending it to the RTL93xx I2C controller.
Only the actual data could be seen on the wire:
S Addr Wr [A] Comm [A] Data [A] Data [A] ... [A] Data [A] P
This wire format is not SMBus Block Write compatible but matches the format
of an I2C Block Write. Simply adding the count byte to the buffer for the
I2C controller is enough to fix the transmission.
This also affects read because the I2C controller must receive the count
byte + $count * data bytes.
Fixes: c366be720235 ("i2c: Add driver for the RTL9300 I2C controller")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: <stable@vger.kernel.org> # v6.13+
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250810-i2c-rtl9300-multi-byte-v5-4-cd9dca0db722@narfation.org
|
|
The timeout for transfers was only set to 2ms. Because of this relatively
low limit, 12-byte read operations to the frontend MCU of a RTL8239 POE PSE
chip cluster was consistently resulting in a timeout.
The original OpenWrt downstream driver [1] was not using any timeout limit
at all. This is also possible by setting the timeout_us parameter of
regmap_read_poll_timeout() to 0. But since the driver currently implements
the ETIMEDOUT error, it is more sensible to increase the timeout in such a
way that communication with the (quite common) Realtek I2C-connected POE
management solution is possible.
[1] https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/realtek/files-6.12/drivers/i2c/busses/i2c-rtl9300.c;h=c4d973195ef39dc56d6207e665d279745525fcac#l202
Fixes: c366be720235 ("i2c: Add driver for the RTL9300 I2C controller")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: <stable@vger.kernel.org> # v6.13+
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250810-i2c-rtl9300-multi-byte-v5-3-cd9dca0db722@narfation.org
|
|
The RTL93xx I2C controller has 4 32 bit registers to store the bytes for
the upcoming I2C transmission. The first byte is stored in the
least-significant byte of the first register. And the last byte in the most
significant byte of the last register. A map of the transferred bytes to
their order in the registers is:
reg 0: 0x04_03_02_01
reg 1: 0x08_07_06_05
reg 2: 0x0c_0b_0a_09
reg 3: 0x10_0f_0e_0d
The i2c_read() function basically demonstrates how the hardware would pick
up bytes from this register set. But the i2c_write() function was just
pushing bytes one after another to the least significant byte of a register
AFTER shifting the last one to the next more significant byte position.
If you would then have tried to send a buffer with numbers 1-11 using
i2c_write(), you would have ended up with following register content:
reg 0: 0x01_02_03_04
reg 1: 0x05_06_07_08
reg 2: 0x00_09_0a_0b
reg 3: 0x00_00_00_00
On the wire, you would then have seen:
Sr Addr Wr [A] 04 A 03 A 02 A 01 A 08 A 07 A 06 A 05 A 0b A 0a A 09 A P
But the correct data transmission was expected to be
Sr Addr Wr [A] 01 A 02 A 03 A 04 A 05 A 06 A 07 A 08 A 09 A 0a A 0b A P
Because of this multi-byte ordering problem, only single byte i2c_write()
operations were executed correctly (on the wire).
By shifting the byte directly to the correct end position in the register,
it is possible to avoid this incorrect byte ordering and fix multi-byte
transmissions.
The second initialization (to 0) of vals was also be dropped because this
array is initialized to 0 on the stack by using `= {};`. This makes the
fix a lot more readable.
Fixes: c366be720235 ("i2c: Add driver for the RTL9300 I2C controller")
Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
Cc: <stable@vger.kernel.org> # v6.13+
Co-developed-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250810-i2c-rtl9300-multi-byte-v5-2-cd9dca0db722@narfation.org
|
|
The data->block[0] variable comes from user. Without proper check,
the variable may be very large to cause an out-of-bounds bug.
Fix this bug by checking the value of data->block[0] first.
1. commit 39244cc75482 ("i2c: ismt: Fix an out-of-bounds bug in
ismt_access()")
2. commit 92fbb6d1296f ("i2c: xgene-slimpro: Fix out-of-bounds bug in
xgene_slimpro_i2c_xfer()")
Fixes: c366be720235 ("i2c: Add driver for the RTL9300 I2C controller")
Signed-off-by: Alex Guo <alexguo1023@gmail.com>
Cc: <stable@vger.kernel.org> # v6.13+
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250810-i2c-rtl9300-multi-byte-v5-1-cd9dca0db722@narfation.org
|
|
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
