summaryrefslogtreecommitdiff
path: root/drivers/ide/ide-floppy.c
AgeCommit message (Collapse)Author
2008-04-28ide: add ide_pad_transfer() helperBartlomiej Zolnierkiewicz
* Add ide_pad_transfer() helper (which uses ->{in,out}put_data methods internally so the transfer is also padded to drive+host requirements) and use it instead of ide_atapi_{write_zeros,discard_data}(). * Remove no longer needed ide_atapi_{write_zeros,discard_data}(). Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: add ide_execute_pkt_cmd() helperBartlomiej Zolnierkiewicz
Add ide_execute_pkt_cmd() helper for executing PACKET command, then convert ATAPI device drivers to use it. As a nice side-effect this fixes ide-{floppy,tape,scsi} w.r.t. ide_lock taking (ide-cd was OK). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-{floppy,tape,scsi}: 400ns delay is required after executing the commandBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: always use ->OUTBSYNC method for executing commandsBartlomiej Zolnierkiewicz
Always use ->OUTBSYNC method for executing commands so the posting is done if needed (this affects only pmac and scc_pata host drivers at the moment). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: merge ->atapi_*put_bytes and ->ata_*put_data methodsBartlomiej Zolnierkiewicz
* Merge ->atapi_{in,out}put_bytes and ->ata_{in,out}put_data methods into new ->{in,out}put_data methods which take number of bytes to transfer as an argument and always do padding. While at it: * Use 'hwif' or 'drive->hwif' instead of 'HWIF(drive)'. There should be no functional changes caused by this patch (all users of ->ata_{in,out}put_data methods were using multiply-of-4 word counts). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27ide: add struct ide_io_ports (take 3)Bartlomiej Zolnierkiewicz
* Add struct ide_io_ports and use it instead of `unsigned long io_ports[]` in ide_hwif_t. * Rename io_ports[] in hw_regs_t to io_ports_array[]. * Use un-named union for 'unsigned long io_ports_array[]' and 'struct ide_io_ports io_ports' in hw_regs_t. * Remove IDE_*_OFFSET defines. v2: * scc_pata.c build fix from Stephen Rothwell. v3: * Fix ctl_adrr typo in Sparc-specific part of ns87415.c. (Noticed by Andrew Morton) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: add struct ide_dma_ops (take 3)Bartlomiej Zolnierkiewicz
Add struct ide_dma_ops and convert core code + drivers to use it. While at it: * Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods. * Drop "ide_" "infixes" from DMA methods. * au1xxx-ide.c: - use auide_dma_{test_irq,end}() directly in auide_dma_timeout() * pdc202xx_old.c: - drop "old_" "infixes" from DMA methods * siimage.c: - add siimage_dma_test_irq() helper - print SATA warning in siimage_init_one() * Remove no longer needed ->init_hwif implementations. v2: * Changes based on review from Sergei: - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/ - s/drive->hwif/hwif/ in idefloppy_pc_intr(). - fix patch description w.r.t. au1xxx-ide changes - fix au1xxx-ide build - fix naming for cmd64*_dma_ops - drop "ide_" and "old_" infixes - s/hpt3xxx_dma_ops/hpt37x_dma_ops/ - s/hpt370x_dma_ops/hpt370_dma_ops/ - use correct DMA ops for HPT302/N, HPT371/N and HPT374 - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/ v3: * Two bugs slipped in v2 (noticed by Sergei): - use correct DMA ops for HPT374 (for real this time) - handle HPT370/HPT370A properly Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26IDE: Coding Style fixes to drivers/ide/ide-floppy.cPaolo Ciarrocchi
File is now error free. Compile tested. [bart: minor fixes, md5sum checked] Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: use generic ATAPI packet command flags in ide-{floppy,tape}Borislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-floppy: rename end_request handler properlyBorislav Petkov
mv idefloppy_do_end_request -> idefloppy_end_request as is the case with ide-cd Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-floppy: convert driver to using generic ide_atapi_pcBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: remove IDE_*_REG macrosBartlomiej Zolnierkiewicz
* Add IDE_{ALTSTATUS,IREASON,BCOUNTL,BCOUNTH}_OFFSET defines. * Remove IDE_*_REG macros - this results in more readable and slightly smaller code. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide: add ide_atapi_{discard_data,write_zeros} inline helpersBartlomiej Zolnierkiewicz
Add ide_atapi_{discard_data,write_zeros} inline helpers to <linux/ide.h> and use them instead of home-brewn helpers in ide-{floppy,tape,scsi}. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18ide-floppy: remove struct idefloppy_id_gcwBorislav Petkov
Bart: - minor fixups Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide: add ide_read_error() inline helperBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide: add ide_read_[alt]status() inline helpersBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: bump driver version numberBorislav Petkov
Acknowledge major ide-floppy code refactoring and cleanup by bumping the driver version number. Also, remove a wrong comment. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: fix most of the remaining checkpatch.pl issuesBorislav Petkov
such as ERROR: switch and case should be at the same indent ERROR: need spaces around that '=' (ctx:VxV) ERROR: trailing statements should be on next line WARNING: no space between function name and open parenthesis '(' WARNING: printk() should include KERN_ facility level ERROR: That open brace { should be on the previous line ERROR: use tabs not spaces ERROR: do not use assignment in if condition WARNING: braces {} are not necessary for single statement blocks ERROR: need space after that ',' (ctx:VxV) WARNING: line over 80 characters ERROR: do not use assignment in if condition ... and so on. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: remove atomic test_*bit macrosBorislav Petkov
..and replace them with flag enums. Bart: - fix idefloppy_media_changed() return value Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: remove unused flag PC_ABORTBorislav Petkov
This flag was never being set in the code so remove it. By the way, the code in the second patch was being executed unconditionally, i.e. in case pc->retries > IDEFLOPPY_MAX_PC_RETRIES is true (actually that is the only case when the outer if-test passed), !test_bit(PC_ABORT, &pc->flags) was always true so the comment is now incorrect and has to go. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: remove IDEFLOPPY_DEBUG_INFOBorislav Petkov
This info is already available through ioctl() and /proc Bart: - dump 'gcw.packet_size' for unsupported packet sizes Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: remove unused IDEFLOPPY_USE_READ12Borislav Petkov
This flag is not being set anywhere in the driver so it can go. Bart: - minor CodingStyle fixup Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: merge idefloppy_{input,output}_buffersBorislav Petkov
We merge idefloppy_{input,output}_buffers() into idefloppy_io_buffers() by introducing a 4th arg. called direction. According to its value we atapi_input_bytes() or atapi_output_bytes(). Also, this simplifies the interrupt handler logic a bit. Finally, rename idefloppy_io_buffers() to ide_floppy_io_buffers(). Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: use an xfer_func_t and io_buf_t typedefs in order to unify rwBorislav Petkov
Also, move xfer_func_t typedef to the ide.h since it is used by two drivers now (more coming). Bart: - use __func__ while at it Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: remove IDEFLOPPY_DEBUG_BUGS macroBorislav Petkov
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: mv idefloppy_{should_,}report_errorBorislav Petkov
In addition to shortening the function name, move the printk-call into the function thereby saving some code lines. Also, make the function out_of_line since it is not on a performance critical path. Finally, rename the reworked function to ide_floppy..(). Bart: - minor CodingStyle fixup Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: report DMA handling in idefloppy_pc_intr() properlyBorislav Petkov
Bart: - use 'hwif' instead of 'HWIF(drive)' - minor CodingStyle fixup Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: factor out ioctl handlers from idefloppy_ioctl()Borislav Petkov
By passing idefloppy_floppy_t *floppy to the factored out functions, we get rid of (almost) all local vars so stack usage should be at minimum here. Also, we merge idefloppy_begin_format() into idefloppy_format_start() since it is its only user. Also, rename idefloppy_format_start() to idefloppy_format_unit(). Finally, rename the reworked functions to ide_floppy..(). Bart - minor CodingStyle fixup Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: remove struct idefloppy_capacity_descriptorBorislav Petkov
Also, - remove the accompanying 4 byte idefloppy_capacity_header. - rename functions from idefloppy_... to ide_floppy_... after cleanup. - simplify loop in ide_floppy_get_capacity() by reversing if-test condition logically. - finally, fix white space and checkpatch.pl issues Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: remove struct idefloppy_flexible_disk_pageBorislav Petkov
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: remove struct idefloppy_mode_parameter_headerBorislav Petkov
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: remove struct idefloppy_request_sense_resultBorislav Petkov
While at it, collapse idefloppy_analyze_error() into idefloppy_request_sense_callback() since the latter was its only user. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: remove struct idefloppy_inquiry_resultBorislav Petkov
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: remove struct idefloppy_capabilities_pageBorislav Petkov
This change is rather temporary and is in preparation of using generic commands as is the case with ide-cd and the uniform cdrom layer (i.e. init_cdrom_command()) However, before this happens, we'll have to remove all typedefs and teach idefloppy_create_mode_sense_cmd() to work directly on u8 buffers. Also, since idefloppy_get_capability_page() was used to read only the sfrp bit, rename the latter so that the name reflects what it does. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: cleanup and unify debugging macro callsBorislav Petkov
* some debug_log() calls were not using "ide-floppy: " prefix * a few used printk levels different than KERN_INFO (KERN_NOTICE and KERN_ERR, which is the default one if no level is given) Bart: - fix build issues for IDEFLOPPY_DEBUG_LOG set to 1 while at it - s/__FUNCTION__/__func__/ Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: include the proper headersBorislav Petkov
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: disambiguate function namesBorislav Petkov
There were two almost identical function names in ide-floppy.c, which makes their distinction almost impossible. While ide_floppy_release() cleans up the object after the last reference to it has been dropped, idefloppy_release() is the blkdev .release method from struct block_device_operations which releases that last reference. Rename ide_floppy_release() to idefloppy_cleanup_obj() in order to make its purpose more clear. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: remove unnecessary ->handler != NULL checkBorislav Petkov
This BUG_ON is unneeded since the ->handler != NULL check is performed in ide_set_handler(). Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: replace ntoh{s,l} and hton{s,l} calls with the generic byteorderBorislav Petkov
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide-floppy: convert to generic packet commandsBorislav Petkov
Replace the ide-floppy packet commands opcode defines with the generic ones. Add a missing GPCMD_WRITE_12 (opcode 0xaa) to the generic ones in cdrom.h. The last one can be found in the current version of INF-8090, p.905. [ Bart: Tejun's libata patch also adding GPCMD_WRITE_12 got merged first ] Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-floppy: cleanup headerBorislav Petkov
Move ide-floppy historical changelog to Documentation/ide/ChangeLog.ide-floppy.1996-2002 Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: update/add my CopyrightsBartlomiej Zolnierkiewicz
The last years stuff and a trip down memory lane... Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: delete filenames/versions from commentsBartlomiej Zolnierkiewicz
Delete filenames/versions from comments. I'm leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s to maintainers of the respective drivers. While at it: * Remove unused VERSION define from ide.c. * Remove unused/stale DRV_VERSION define from au1xxx-ide.c. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-{floppy,tape}: remove debug code for dumping identify dataBartlomiej Zolnierkiewicz
IDE core supports dumping raw identify data in hdparm friendly format now so verbose identify dumping in ide-{floppy,tape}.c device drivers (done iff IDE{FLOPPY,TAPE}_DEBUG_INFO is defined to '1' and it is '0' by default) is no longer nedeed. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add ide_pktcmd_tf_load() helperBartlomiej Zolnierkiewicz
Add ide_pktcmd_tf_load() helper and convert ATAPI device drivers to use it. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide-{floppy,tape,scsi}: fix register loading order when issuing packet commandBartlomiej Zolnierkiewicz
Load IDE_BCOUNTL_REG before IDE_BCOUNTH_REG when issuing packet command. It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove atapi_ireason_t (take 3)Bartlomiej Zolnierkiewicz
Remove atapi_ireason_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible) v2: * v1 had CD and IO bits reversed in many places. * Use CD and IO defines from <linux/hdreg.h>. v3: * Fix incorrect "(ireason & IO) == test_bit()". (Noticed by Sergei) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove ata_nsector_t, ata_data_t and atapi_bcount_tBartlomiej Zolnierkiewicz
Remove ata_nsector_t, ata_data_t (unused) and atapi_bcount_t. While at it: * replace 'HWIF(drive)' by 'hwif' Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove atapi_feature_tBartlomiej Zolnierkiewicz
Remove atapi_feature_t. While at it: * replace 'HWIF(drive)' by 'hwif' Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove atapi_error_t (take 2)Bartlomiej Zolnierkiewicz
Remove atapi_error_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' v2: * Add {ILI,EOM,LFS}_ERR defines to <linux/hdreg.h>. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 03:49:12 +0000