summaryrefslogtreecommitdiff
path: root/drivers/ieee1394
AgeCommit message (Collapse)Author
2008-02-02ieee1394: sbp2: fix bogus s/g access changeStefan Richter
sg_dma_len(sg) is invalid before the s/g list is DMA-mapped. This fixes a post 2.6.24 regression which prevents access to SBP-2 devices on several architectures, introduced by "ieee1394: sbp2: s/g list access cosmetics", commit 825f1df545ab0289185373b0eaf06fb0b3487422. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30ieee1394: ohci1394: don't schedule IT tasklets on IR eventsStefan Richter
Bug noted by Pieter Palmers: Isochronous transmit tasklets were scheduled on isochronous receive events, in addition to the proper isochronous receive tasklets. http://marc.info/?l=linux1394-devel&m=119783196222802 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30ieee1394: sbp2: raise default transfer size limitStefan Richter
This patch speeds up sbp2 a little bit --- but more importantly, it brings the behavior of sbp2 and fw-sbp2 closer to each other. Like fw-sbp2, sbp2 now does not limit the size of single transfers to 255 sectors anymore, unless told so by a blacklist flag or by module load parameters. Only very old bridge chips have been known to need the 255 sectors limit, and we have got one such chip in our hardwired blacklist. There certainly is a danger that more bridges need that limit; but I prefer to have this issue present in both fw-sbp2 and sbp2 rather than just one of them. An OXUF922 with 400GB 7200RPM disk on an S400 controller is sped up by this patch from 22.9 to 23.5 MB/s according to hdparm. The same effect could be achieved before by setting a higher max_sectors module parameter. On buses which use 1394b beta mode, sbp2 and fw-sbp2 will now achieve virtually the same bandwidth. Fw-sbp2 only remains faster on 1394a buses due to fw-core's gap count optimization. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30ieee1394: remove unused codeStefan Richter
The code has been in "#if 0 - #endif" since Linux 2.6.12. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30ieee1394: small cleanup after "nopage"Stefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30ieee1394: nopageNick Piggin
Convert ieee1394 from nopage to fault. Remove redundant vma range checks (correct resource range check is retained). Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30ieee1394: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30ieee1394: sbp2: s/g list access cosmeticsStefan Richter
Replace sg->length by sg_dma_len(sg). Rename a variable for shorter line lengths and eliminate some superfluous local variables. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30ieee1394: sbp2: prepare for s/g chainingStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30x86: early boot debugging via FireWire (ohci1394_dma=early)Bernhard Kaindl
This patch adds a new configuration option, which adds support for a new early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch() to decide wether OHCI-1394 FireWire controllers should be initialized and enabled for physical DMA access to allow remote debugging of early problems like issues ACPI or other subsystems which are executed very early. If the config option is not enabled, no code is changed, and if the boot paramenter is not given, no new code is executed, and independent of that, all new code is freed after boot, so the config option can be even enabled in standard, non-debug kernels. With specialized tools, it is then possible to get debugging information from machines which have no serial ports (notebooks) such as the printk buffer contents, or any data which can be referenced from global pointers, if it is stored below the 4GB limit and even memory dumps of of the physical RAM region below the 4GB limit can be taken without any cooperation from the CPU of the host, so the machine can be crashed early, it does not matter. In the extreme, even kernel debuggers can be accessed in this way. I wrote a small kgdb module and an accompanying gdb stub for FireWire which allows to gdb to talk to kgdb using remote remory reads and writes over FireWire. An version of the gdb stub fore FireWire is able to read all global data from a system which is running a a normal kernel without any kernel debugger, without any interruption or support of the system's CPU. That way, e.g. the task struct and so on can be read and even manipulated when the physical DMA access is granted. A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt and I've put a copy online at ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt It also has links to all the tools which are available to make use of it another copy of it is online at: ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff Signed-Off-By: Bernhard Kaindl <bk@suse.de> Tested-By: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits) [SCSI] usbstorage: use last_sector_bug flag universally [SCSI] libsas: abstract STP task status into a function [SCSI] ultrastor: clean up inline asm warnings [SCSI] aic7xxx: fix firmware build [SCSI] aacraid: fib context lock for management ioctls [SCSI] ch: remove forward declarations [SCSI] ch: fix device minor number management bug [SCSI] ch: handle class_device_create failure properly [SCSI] NCR5380: fix section mismatch [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices [SCSI] IB/iSER: add logical unit reset support [SCSI] don't use __GFP_DMA for sense buffers if not required [SCSI] use dynamically allocated sense buffer [SCSI] scsi.h: add macro for enclosure bit of inquiry data [SCSI] sd: add fix for devices with last sector access problems [SCSI] fix pcmcia compile problem [SCSI] aacraid: add Voodoo Lite class of cards. [SCSI] aacraid: add new driver features flags [SCSI] qla2xxx: Update version number to 8.02.00-k7. [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command. ...
2008-01-24ieee1394: use class iteration apiDave Young
Convert to use the class iteration api. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-11[SCSI] relax scsi dma alignmentJames Bottomley
This patch relaxes the default SCSI DMA alignment from 512 bytes to 4 bytes. I remember from previous discussions that usb and firewire have sector size alignment requirements, so I upped their alignments in the respective slave allocs. The reason for doing this is so that we don't get such a huge amount of copy overhead in bio_copy_user() for udev. (basically all inquiries it issues can now be directly mapped). Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-11-04ieee1394: iso and async streams: s/g list fixJens Axboe
Torsten Kaiser wrote: > Looking that calltrace upwards, it seems replacing the > memset(dma->sglist,...) with sg_init_table(...) would fix the BUG_ON() > as that inits the SG_MAGIC. Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-11-02cleanup asm/scatterlist.h includesAdrian Bunk
Not architecture specific code should not #include <asm/scatterlist.h>. This patch therefore either replaces them with #include <linux/scatterlist.h> or simply removes them if they were unused. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-31ieee1394: ieee1394_transactions.c: remove dead codeAdrian Bunk
This patch removes dead code spotted by the Intel C Compiler. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-24SG: Change sg_set_page() to take length and offset argumentJens Axboe
Most drivers need to set length and offset as well, so may as well fold those three lines into one. Add sg_assign_page() for those two locations that only needed to set the page, where the offset/length is set outside of the function context. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23[PATCH] Fix breakage after SG cleanupsRalf Baechle
Commits 58b053e4ce9d2fc3023645c1b96e537c72aa8d9a ("Update arch/ to use sg helpers") 45711f1af6eff1a6d010703b4862e0d2b9afd056 ("[SG] Update drivers to use sg helpers") fa05f1286be25a8ce915c5dd492aea61126b3f33 ("Update net/ to use sg helpers") converted many files to use the scatter gather helpers without ensuring that the necessary headerfile <linux/scatterlist> is included. This happened to work for ia64, powerpc, sparc64 and x86 because they happened to drag in that file via their <asm/dma-mapping.h>. On most of the others this probably broke. Instead of increasing the header file spider web I choose to include <linux/scatterlist.h> directly into the affectes files. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22[SG] Update drivers to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16ieee1394: ieee1394_core.c: use DEFINE_SPINLOCK for spinlock definitionMatthias Kaehlcke
drivers/ieee1394/ieee1394_core.c: Define spinlock using DEFINE_SPINLOCK instead of assignment to SPIN_LOCK_UNLOCKED Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16ieee1394: csr1212: proper refcountingStefan Richter
At least since nodemgr got rid of coarse global locking, accesses to struct csr1212_keyval's reference counter should be atomic and coupled with proper barriers. Also, calls to csr1212_keep_keyval(kv) should occur before kv is being used. (We probably should convert refcnt to struct kref, but how to keep csr1212_destroy_keyval's implementation non-recursively then?) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16ieee1394: nodemgr: fix leak of struct csr1212_keyvalStefan Richter
csr1212_keep_keyval(kv) in nodemgr_process_root_directory was unbalanced if ne->vendor_name_kv already exists. This happens for example if eth1394 or raw1394 modify the local config ROM and it is parsed again. As a bonus, the attempt to add the vendor_name_kv sysfs attribute when it already exists is now fixed for good. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16ieee1394: pcilynx: I2C cleanupsJean Delvare
* Delete optional and empty i2c client_register and client_unregister callbacks. * Use the proper i2c adapter ID. * Don't use a template to initialize the i2c_adapter structure, it's inefficient. * Update a misleading comment on why we use i2c_transfer rather than higher level i2c functions. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16ieee1394: Fix kthread stopping in nodemgr_host_threadSatyam Sharma
The nodemgr host thread can exit on its own even when kthread_should_stop is not true, on receiving a signal (might never happen in practice, as it ignores signals). But considering kthread_stop() must not be mixed with kthreads that can exit on their own, I think changing the code like this is clearer. This change means the thread can cut its sleep short when receive a signal but looking at the code around, that sounds okay (and again, it might never actually recieve a signal in practice). Signed-off-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16ieee1394: sbp2: fix unsafe iteration over list of devicesStefan Richter
sbp2_host_reset and sbp2_handle_status_write are not serialized against sbp2_alloc_device and sbp2_remove_device. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16ieee1394: pcilynx: superfluous local variablesStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16ieee1394: eth1394: fix lock imbalanceStefan Richter
bad_proto can be reached from points which did not take priv->lock. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16ieee1394: eth1394: superfluous local variableStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-10[NET]: Move hardware header operations out of netdevice.Stephen Hemminger
Since hardware header operations are part of the protocol class not the device instance, make them into a separate object and save memory. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Wrap hard_header_parseStephen Hemminger
Wrap the hard_header_parse function to simplify next step of header_ops conversion. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-20ieee1394: ohci1394: fix initialization if built non-modularStefan Richter
Initialization of ohci1394 was broken according to one reporter if the driver was statically linked, i.e. not built as loadable module. Dmesg: PCI: Device 0000:02:07.0 not available because of resource collisions ohci1394: Failed to enable OHCI hardware. This was reported for a Toshiba Satellite 5100-503. The cause is commit 8df4083c5291b3647e0381d3c69ab2196f5dd3b7 in Linux 2.6.19-rc1 which only served purposes of early remote debugging via FireWire. This functionality is better provided by the currently out-of-tree driver ohci1394_earlyinit. Reversal of the commit was OK'd by Andi Kleen. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-25ieee1394: sbp2: fix sbp2_remove_device for error casesStefan Richter
Bug found by Olaf Hering <olh@suse.de>: sbp2util_remove_command_orb_pool requires a valid lu->hi pointer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-02ieee1394: sbp2: more correct Kconfig dependenciesStefan Richter
Make the option SBP2_PHYS_DMA available on all architectures where it compiles. This includes x86-64 where I runtime-tested it successfully. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-02ieee1394: revert "sbp2: enforce 32bit DMA mapping"Stefan Richter
Revert commit 0555659d63c285ceb7ead3115532e1b71b0f27a7 from 2.6.22-rc1. The dma_set_mask call somehow failed on a PowerMac G5, PPC64: http://lkml.org/lkml/2007/8/1/344 Should there ever occur a DMA mapping beyond the physical DMA range, a proper SBP-2 firmware will report transport errors. So let's leave it at that. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Olaf Hering <olh@suse.de>
2007-07-26raw1394 __user annotationAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20mm: Remove slab destructors from kmem_cache_create().Paul Mundt
Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-17Freezer: make kernel threads nonfreezable by defaultRafael J. Wysocki
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits) [SCSI] ibmvscsi: convert to use the data buffer accessors [SCSI] dc395x: convert to use the data buffer accessors [SCSI] ncr53c8xx: convert to use the data buffer accessors [SCSI] sym53c8xx: convert to use the data buffer accessors [SCSI] ppa: coding police and printk levels [SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc [SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c [SCSI] remove the dead CYBERSTORMIII_SCSI option [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA [SCSI] Clean up scsi_add_lun a bit [SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs [SCSI] sni_53c710: Cleanup [SCSI] qla4xxx: Fix underrun/overrun conditions [SCSI] megaraid_mbox: use mutex instead of semaphore [SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation. [SCSI] qla2xxx: update version to 8.02.00-k1. [SCSI] qla2xxx: add support for NPIV [SCSI] stex: use resid for xfer len information [SCSI] Add Brownie 1200U3P to blacklist [SCSI] scsi.c: convert to use the data buffer accessors ...
2007-07-15ieee1394: forgotten dereference...Al Viro
Going through the string and waiting for _pointer_ to become '\0' is not what the authors meant... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Ben Collins <ben.collins@ubuntu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10ieee1394: remove old isochronous ABIStefan Richter
Based on patch "the scheduled removal of RAW1394_REQ_ISO_{SEND,LISTEN}" from Adrian Bunk, November 20 2006. This patch also removes the underlying facilities in ohci1394 and disables them in pcilynx. That is, hpsb_host_driver.devctl() and hpsb_host_driver.transmit_packet() are no longer used for iso reception and transmission. Since video1394 and dv1394 only work with ohci1394 and raw1394's rawiso interface has never been implemented in pcilynx, pcilynx is now no longer useful for isochronous applications. raw1394 will still handle the request types but will complete the requests with errors that indicate API version conflicts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10ieee1394: sbp2: change some module parameters from int to boolStefan Richter
This is upwards compatible, except that integer values other than 0 or 1 are no longer accepted. But values like "Y", "N", "no", "nnoooh!" work now. Also, improve a comment on the serialize_io parameter and make the ORB_SET_EXCLUSIVE macro ultra-safe. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10ieee1394: first minimal NUMA awarenessStefan Richter
Association of a host device with a node on NUMA machines optimizes allocations of skbs given from the networking stack to eth1394. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10ieee1394: eth1394: revert parent device to that in 2.6.20Stefan Richter
After ieee1394 was converted away from class_device like the networking subsystem was already in 2.6.21, eth1394's device may point to the fw-host device as its parent again like in 2.6.20. This affects userspace tools which examine the sysfs representation of eth1394's device. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10ieee1394: nodemgr: parallelize between several hostsStefan Richter
Remove the global nodemgr_serialize mutex which enclosed most of the host thread event loop. This allows for parallelism between several host adapter cards. Properly serialize the driver hooks .update(), .suspend(), .resume(), and .remove() by means of device->sem. These hooks can be called from outside the host threads' contexts. Get() and put() the device.driver when calling its hooks. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10ieee1394: convert ieee1394 from "struct class_device" to "struct device"Kay Sievers
Here is a straightforward conversion to "struct device". The "struct class_device" will be removed from the kernel. It seems to work fine for me with and without CONFIG_SYSFS_DEPRECATED set. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10ieee1394: raw1394: fix a 32/64-bits compat fixStefan Richter
I was told that only i386 aligns 64 bit integers at 4 bytes boundaries while all other architectures (32 bit architectures with 64 bit siblings) align it on 8 bytes boundaries. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10ieee1394: raw1394: Add ioctl() for 32bit userland on 64bit kernel, amendmentStefan Richter
Pointed out by Arnd Bergmann: PPC32 aligns this at 64bit, IA32 packs it. A kernel-wide available __compat_u64 which is 4-byte aligned on AMD64 and IA64 would be nicer though. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10ieee1394: raw1394: Add ioctl() for 32bit userland on 64bit kernelPetr Vandrovec
Add compat_ioctl. Although all structures are more or less same, raw1394_iso_packets got pointer inside, and raw1394_cycle_timer got unwanted padding in the middle. I did not add any translation for ioctls passing array of integers around as integers seem to have same size (32 bits) on all architectures supported by Linux. Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Acked-by: Dan Dennedy <dan@dennedy.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (split into 3 patches)