summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)Author
2018-09-09iio: ad9523: Fix return value for ad952x_store()Lars-Peter Clausen
commit 9a5094ca29ea9b1da301b31fd377c0c0c4c23034 upstream. A sysfs write callback function needs to either return the number of consumed characters or an error. The ad952x_store() function currently returns 0 if the input value was "0", this will signal that no characters have been consumed and the function will be called repeatedly in a loop indefinitely. Fix this by returning number of supplied characters to indicate that the whole input string has been consumed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Fixes: cd1678f96329 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-09iio: ad9523: Fix displayed phaseLars-Peter Clausen
commit 5a4e33c1c53ae7d4425f7d94e60e4458a37b349e upstream. Fix the displayed phase for the ad9523 driver. Currently the most significant decimal place is dropped and all other digits are shifted one to the left. This is due to a multiplication by 10, which is not necessary, so remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Fixes: cd1678f9632 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24iio: pressure: bmp280: fix relative humidity unitTomasz Duszynski
[ Upstream commit 13399ff25f179811ce9c1df1523eb39f9e4a4772 ] According to IIO ABI relative humidity reading should be returned in milli percent. This patch addresses that by applying proper scaling and returning integer instead of fractional format type specifier. Note that the fixes tag is before the driver was heavily refactored to introduce spi support, so the patch won't apply that far back. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Fixes: 14beaa8f5ab1 ("iio: pressure: bmp280: add humidity support") Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03iio:buffer: make length types match kfifo typesMartin Kelly
commit c043ec1ca5baae63726aae32abbe003192bc6eec upstream. Currently, we use int for buffer length and bytes_per_datum. However, kfifo uses unsigned int for length and size_t for element size. We need to make sure these matches or we will have bugs related to overflow (in the range between INT_MAX and UINT_MAX for length, for example). In addition, set_bytes_per_datum uses size_t while bytes_per_datum is an int, which would cause bugs for large values of bytes_per_datum. Change buffer length to use unsigned int and bytes_per_datum to use size_t. Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [bwh: Backported to 4.9: - Drop change to iio_dma_buffer_set_length() - Adjust filename, context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06iio:kfifo_buf: check for uint overflowMartin Kelly
commit 3d13de4b027d5f6276c0f9d3a264f518747d83f2 upstream. Currently, the following causes a kernel OOPS in memcpy: echo 1073741825 > buffer/length echo 1 > buffer/enable Note that using 1073741824 instead of 1073741825 causes "write error: Cannot allocate memory" but no OOPS. This is because 1073741824 == 2^30 and 1073741825 == 2^30+1. Since kfifo rounds up to the nearest power of 2, it will actually call kmalloc with roundup_pow_of_two(length) * bytes_per_datum. Using length == 1073741825 and bytes_per_datum == 2, we get: kmalloc(roundup_pow_of_two(1073741825) * 2 or kmalloc(2147483648 * 2) or kmalloc(4294967296) or kmalloc(UINT_MAX + 1) so this overflows to 0, causing kmalloc to return ZERO_SIZE_PTR and subsequent memcpy to fail once the device is enabled. Fix this by checking for overflow prior to allocating a kfifo. With this check added, the above code returns -EINVAL when enabling the buffer, rather than causing an OOPS. Signed-off-by: Martin Kelly <mkelly@xevo.com> cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13iio: magnetometer: st_magn_spi: fix spi_device_id tableLorenzo Bianconi
[ Upstream commit c83761ff0aac954aa368c623bb0f0d1a3214e834 ] Remove LSM303DLHC, LSM303DLM from st_magn_id_table since LSM303DL series does not support spi interface Fixes: 872e79add756 (iio: magn: Add STMicroelectronics magn driver) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13iio: light: rpr0521 poweroff for probe failsMikko Koivunen
[ Upstream commit 12d74949133e2450533894ea01ce0c56646ce006 ] Set sensor measurement off after probe fail in pm_runtime_set_active() or iio_device_register(). Without this change sensor measurement stays on even though probe fails on these calls. This is maybe rare case, but causes constant power drain without any benefits when it happens. Power drain is 20-500uA, typically 180uA. Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13iio: hi8435: cleanup reset gpioNikita Yushchenko
[ Upstream commit 61305664a542f874283f74bf0b27ddb31f5045d7 ] Reset GPIO is active low. Currently driver uses gpiod_set_value(1) to clean reset, which depends on device tree to contain GPIO_ACTIVE_HIGH - that does not match reality. This fixes driver to use _raw version of gpiod_set_value() to enforce active-low semantics despite of what's written in device tree. Allowing device tree to override that only opens possibility for errors and does not add any value. Additionally, use _cansleep version to make things work with i2c-gpio and other sleeping gpio drivers. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13iio: hi8435: avoid garbage event at first enableNikita Yushchenko
[ Upstream commit ee19ac340c5fdfd89c6348be4563453c61ab54a9 ] Currently, driver generates events for channels if new reading differs from previous one. This "previous value" is initialized to zero, which results into event if value is constant-one. Fix that by initializing "previous value" by reading at event enable time. This provides reliable sequence for userspace: - enable event, - AFTER THAT read current value, - AFTER THAT each event will correspond to change. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13iio: pressure: zpa2326: report interrupted case as failureNicholas Mc Guire
[ Upstream commit e7215fe4d51e69c9d2608ad0c409d48e844d0adc ] If the timeout-case prints a warning message then probably the interrupted case should also. Further, wait_for_completion_interruptible_timeout() returns long not int. Fixes: commit 03b262f2bbf4 ("iio:pressure: initial zpa2326 barometer support") Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-28iio: st_pressure: st_accel: pass correct platform data to initMichael Nosthoff
commit 8b438686a001db64c21782d04ef68111e53c45d9 upstream. Commit 7383d44b added a pointer pdata which get set to the default platform_data when non was defined in the device. But it did not pass this pointer to the st_sensors_init_sensor call but still used the maybe uninitialized platform_data from dev. This breaks initialization when no platform_data is given and the optional st,drdy-int-pin devicetree option is not set. This commit fixes this. Cc: stable@vger.kernel.org Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly") Signed-off-by: Michael Nosthoff <committed@heine.so> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24iio: hid-sensor: fix return of -EINVAL on invalid values in ret or valueColin Ian King
[ Upstream commit c894acc7bf400d039bf740420b22f0b71b7fb504 ] Ensure that when an invalid value in ret or value is found -EINVAL is returned. A previous commit broke the way the return error is being returned and instead caused the return code in ret to be re-assigned rather than be returned. Fixes: 5d9854eaea776 ("iio: hid-sensor: Store restore poll and hysteresis on S3") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24iio: st_pressure: st_accel: Initialise sensor platform data properlyShrirang Bagul
[ Upstream commit 7383d44b84c94aaca4bf695a6bd8a69f2295ef1a ] This patch fixes the sensor platform data initialisation for st_pressure and st_accel device drivers. Without this patch, the driver fails to register the sensors when the user removes and re-loads the driver. 1. Unload the kernel modules for st_pressure $ sudo rmmod st_pressure_i2c $ sudo rmmod st_pressure 2. Re-load the driver $ sudo insmod st_pressure $ sudo insmod st_pressure_i2c Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28iio: adis_lib: Initialize trigger before requesting interruptLars-Peter Clausen
commit f027e0b3a774e10302207e91d304bbf99e3a8b36 upstream. The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty #257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52f4ac6 ("staging:iio: Add common ADIS library") Reported-by: Robin Getz <Robin.Getz@analog.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28iio: buffer: check if a buffer has been set up when poll is calledStefan Windfeldt-Prytz
commit 4cd140bda6494543f1c1b0ccceceaa44b676eef6 upstream. If no iio buffer has been set up and poll is called return 0. Without this check there will be a null pointer dereference when calling poll on a iio driver without an iio buffer. Cc: stable@vger.kernel.org Signed-off-by: Stefan Windfeldt-Prytz <stefan.windfeldt@axis.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09iio: adc: ti-ads1015: add 10% to conversion wait timeLadislav Michl
[ Upstream commit fe895ac88b9fbdf2026f0bfd56c82747bb9d7c48 ] As user's guide "ADS1015EVM, ADS1115EVM, ADS1015EVM-PDK, ADS1115EVM-PDK User Guide (Rev. B)" (http://www.ti.com/lit/ug/sbau157b/sbau157b.pdf) states at page 16: "Note that both the ADS1115 and ADS1015 have internal clocks with a ±10% accuracy. If performing FFT tests, frequencies may appear to be incorrect as a result of this tolerance range.", add those 10% to converion wait time. Cc: Daniel Baluta <daniel.baluta@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30iio: light: fix improper return valuePan Bian
[ Upstream commit db4e5376d058af8924fafd0520a0942d92538d0e ] In function cm3232_reg_init(), it returns 0 even if the last call to i2c_smbus_write_byte_data() returns a negative value (indicates error). As a result, the return value may be inconsistent with the execution status, and the caller of cm3232_reg_init() will not be able to detect the error. This patch fixes the bug. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188641 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15iio: proximity: sx9500: claim direct mode during raw proximity readsAlison Schofield
[ Upstream commit 6b2e7589b82ff534dd5c6d67dd83c53f13691bec ] Driver was checking for direct mode but not locking it. Use the claim/release helper functions to guarantee the device stays in direct mode during raw reads of proximity data. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Reviewed-by: Vlad Dogaru <ddvlad@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15iio: magnetometer: mag3110: claim direct mode during raw writesAlison Schofield
[ Upstream commit 80dea21f95a4672cce545f48dc2ca500b69a2584 ] Driver was checking for direct mode but not locking it. Use claim/release helper functions to guarantee the device stays in direct mode during raw writes. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15iio: pressure: ms5611: claim direct mode during oversampling changesAlison Schofield
[ Upstream commit 3bc1abcddb24f55b9c251e03caa4f9bd22ff748b ] Driver was checking for direct mode before changing oversampling ratios, but was not locking it. Use the claim/release helper functions to guarantee the device stays in direct mode while the oversampling ratios are being updated. Continue to use the drivers private state lock to protect against conflicting direct mode access of the state data. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15iio: trigger: free trigger resource correctlyAlison Schofield
[ Upstream commit 10e840dfb0b7fc345082dd9e5fff3c1c02e7690e ] These stand-alone trigger drivers were using iio_trigger_put() where they should have been using iio_trigger_free(). The iio_trigger_put() adds a module_put which is bad since they never did a module_get. In the sysfs driver, module_get/put's are used as triggers are added & removed. This extra module_put() occurs on an error path in the probe routine (probably rare). In the bfin-timer & interrupt trigger drivers, the module resources are not explicitly managed, so it's doing a put on something that was never get'd. It occurs on the probe error path and on the remove path (not so rare). Tested with the sysfs trigger driver. The bfin & interrupt drivers were build tested & inspected only. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27iio: dummy: events: Add missing breakLars-Peter Clausen
commit be94a6f6d488b4767662e8949dc62361bd1d6311 upstream. Add missing break in iio_simple_dummy_write_event_config() for the voltage threshold event enable attribute. Without this writing to the in_voltage0_thresh_rising_en always returns -EINVAL even though the change was correctly applied. Fixes: 3e34e650db197 ("iio: dummy: Demonstrate the usage of new channel types") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21iio: adc: xilinx: Fix error handlingChristophe JAILLET
[ Upstream commit ca1c39ef76376b67303d01f94fe98bb68bb3861a ] Reorder error handling labels in order to match the way resources have been allocated. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12iio: adc: mcp320x: Fix oops on module unloadLukas Wunner
commit 0964e40947a630a2a6f724e968246992f97bcf1c upstream. The driver calls spi_get_drvdata() in its ->remove hook even though it has never called spi_set_drvdata(). Stack trace for posterity: Unable to handle kernel NULL pointer dereference at virtual address 00000220 Internal error: Oops: 5 [#1] SMP ARM [<8072f564>] (mutex_lock) from [<7f1400d0>] (iio_device_unregister+0x24/0x7c [industrialio]) [<7f1400d0>] (iio_device_unregister [industrialio]) from [<7f15e020>] (mcp320x_remove+0x20/0x30 [mcp320x]) [<7f15e020>] (mcp320x_remove [mcp320x]) from [<8055a8cc>] (spi_drv_remove+0x2c/0x44) [<8055a8cc>] (spi_drv_remove) from [<805087bc>] (__device_release_driver+0x98/0x134) [<805087bc>] (__device_release_driver) from [<80509180>] (driver_detach+0xdc/0xe0) [<80509180>] (driver_detach) from [<8050823c>] (bus_remove_driver+0x5c/0xb0) [<8050823c>] (bus_remove_driver) from [<80509ab0>] (driver_unregister+0x38/0x58) [<80509ab0>] (driver_unregister) from [<7f15e69c>] (mcp320x_driver_exit+0x14/0x1c [mcp320x]) [<7f15e69c>] (mcp320x_driver_exit [mcp320x]) from [<801a78d0>] (SyS_delete_module+0x184/0x1d0) [<801a78d0>] (SyS_delete_module) from [<80108100>] (ret_fast_syscall+0x0/0x1c) Fixes: f5ce4a7a9291 ("iio: adc: add driver for MCP3204/08 12-bit ADC") Cc: Oskar Andero <oskar.andero@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12iio: adc: mcp320x: Fix readout of negative voltagesLukas Wunner
commit e6f4794371ee7cce1339e7ca9542f1e703c5f84a upstream. Commit f686a36b4b79 ("iio: adc: mcp320x: Add support for mcp3301") returns a signed voltage from mcp320x_adc_conversion() but neglects that the caller interprets a negative return value as failure. Only mcp3301 (and the upcoming mcp3550/1/3) is affected as the other chips are incapable of measuring negative voltages. Fix and while at it, add mcp3301 to the list of supported chips at the top of the file. Fixes: f686a36b4b79 ("iio: adc: mcp320x: Add support for mcp3301") Cc: Andrea Galbusera <gizero@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12iio: ad7793: Fix the serial interface resetDragos Bogdan
commit 7ee3b7ebcb74714df6d94c8f500f307e1ee5dda5 upstream. The serial interface can be reset by writing 32 consecutive 1s to the device. 'ret' was initialized correctly but its value was overwritten when ad7793_check_platform_data() was called. Since a dedicated reset function is present now, it should be used instead. Fixes: 2edb769d246e ("iio:ad7793: Add support for the ad7798 and ad7799") Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12IIO: BME280: Updates to Humidity readings need ctrl_reg write!Colin Parker
commit 4b1f0c31f96c45e8521dd84aae50f2aa4aecfb7b upstream. The ctrl_reg register needs to be written after any write to the humidity registers. The value written to the ctrl_reg register does not necessarily need to change, but a write operation must occur. The regmap_update_bits functions will not write to a register if the register value matches the value to be written. This saves unnecessary bus operations. The change in this patch forces a bus write during the chip_config operation by switching to regmap_write_bits. This will fix issues where the Humidity Sensor Oversampling bits are not updated after initialization. Signed-off-by: Colin Parker <colin.parker@aclima.io> Acked-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12iio: core: Return error for failed read_regMatt Fornero
commit 3d62c78a6eb9a7d67bace9622b66ad51e81c5f9b upstream. If an IIO device returns an error code for a read access via debugfs, it is currently ignored by the IIO core (other than emitting an error message). Instead, return this error code to user space, so upper layers can detect it correctly. Signed-off-by: Matt Fornero <matt.fornero@mathworks.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12iio: ad_sigma_delta: Implement a dedicated reset functionDragos Bogdan
commit 7fc10de8d49a748c476532c9d8e8fe19e548dd67 upstream. Since most of the SD ADCs have the option of reseting the serial interface by sending a number of SCLKs with CS = 0 and DIN = 1, a dedicated function that can do this is usefull. Needed for the patch: iio: ad7793: Fix the serial interface reset Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path ↵Christophe JAILLET
of 'twl4030_madc_probe()' commit 7f70be6e4025db0551e6863e7eb9cca07122695c upstream. Commit 7cc97d77ee8a has introduced a call to 'regulator_disable()' in the .remove function. So we should also have such a call in the .probe function in case of error after a successful 'regulator_enable()' call. Add a new label for that and use it. Fixes: 7cc97d77ee8a ("iio: adc: twl4030: Fix ADC[3:6] readings") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()'Christophe JAILLET
commit 245a396a9b1a67ac5c3228737c261b3e48708a2a upstream. If 'devm_regulator_get()' fails, we should go through the existing error handling path instead of returning directly, as done is all the other error handling paths in this function. Fixes: 7cc97d77ee8a ("iio: adc: twl4030: Fix ADC[3:6] readings") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modificationsHans de Goede
[ Upstream commit fa2849e9649b5180ffc4cb3c3b005261c403093a ] For some reason the axp288_adc driver was modifying the AXP288_ADC_TS_PIN_CTRL register, changing bits 0-1 depending on whether the GP_ADC channel or another channel was written. These bits control when a bias current is send to the TS_PIN, the GP_ADC has its own pin and a separate bit in another register to control the bias current. Not only does changing when to enable the TS_PIN bias current (always or only when sampling) when reading the GP_ADC make no sense at all, the code is modifying these bits is writing the entire register, assuming that all the other bits have their default value. So if the firmware has configured a different bias-current for either pin, then that change gets clobbered by the write, likewise if the firmware has set bit 2 to indicate that the battery has no thermal sensor, this will get clobbered by the write. This commit fixes all this, by simply removing all writes to the AXP288_ADC_TS_PIN_CTRL register, they are not needed to read the GP_ADC pin, and can actually be harmful. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-08iio: adc: imx25-gcq: Fix module autoloadJavier Martinez Canillas
[ Upstream commit 8f0d7daf53972da0004f7a5a4d938c85333db300 ] If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/iio/adc/fsl-imx25-gcq.ko | grep alias $ After this patch: $ modinfo drivers/iio/adc/fsl-imx25-gcq.ko | grep alias alias: of:N*T*Cfsl,imx25-gcqC* alias: of:N*T*Cfsl,imx25-gcq Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09iio: adc: ti-ads1015: add adequate wait time to get correct conversionAkinobu Mita
commit 4744d4e2afebf9644a439da9ca73d822fdd67bd9 upstream. This driver assumes that the device is operating in the continuous conversion mode which performs the conversion continuously. So this driver inserts a wait time before reading the conversion register if the configuration is changed from a previous request. Currently, the wait time is only the period required for a single conversion that is calculated as the reciprocal of the sampling frequency. However we also need to wait for the the previous conversion to complete. Otherwise we probably get the conversion result for the previous configuration when the sampling frequency is lower. Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09iio: adc: ti-ads1015: don't return invalid value from buffer setup callbacksAkinobu Mita
commit a6fe5e52d5ecfc98530034d6c9db73777cf41ede upstream. pm_runtime_get_sync() and pm_runtime_put_autosuspend() return 0 on success, 1 if the device's runtime PM status was already requested status or error code on failure. So a positive return value doesn't indicate an error condition. However, any non-zero return values from buffer preenable and postdisable callbacks are recognized as an error and this driver reuses the return value from pm_runtime_get_sync() and pm_runtime_put_autosuspend() in these callbacks. This change fixes the false error detections. Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09iio: adc: ti-ads1015: avoid getting stale result after runtime resumeAkinobu Mita
commit 73e3e3fc50de50cfd68e945d85679c983ed31bd9 upstream. This driver assumes that the device is operating in the continuous conversion mode which performs the conversion continuously. So this driver doesn't insert a wait time before reading the conversion register if the configuration is not changed from a previous request. This assumption is broken if the device is runtime suspended and entered a power-down state. The forthcoming request causes reading a stale result from the conversion register as the device is runtime resumed just before. Fix it by adding a flag to detect that condition and insert a necessary wait time. Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09iio: adc: ti-ads1015: enable conversion when CONFIG_PM is not setAkinobu Mita
commit e8245c68350104b6022b6783719e843d69ea7c43 upstream. The ADS1015 device have two operating modes, continuous conversion mode and single-shot mode. This driver assumes that the continuous conversion mode is selected by runtime resume callback when the ADC result is requested. If CONFIG_PM is disabled, the device is always in the default single-shot mode and no one begins a single conversion. So the conversion register doesn't contain valid ADC result. Fix it by changing the continuous mode in probe function. Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09iio: adc: ti-ads1015: fix scale information for ADS1115Akinobu Mita
commit 8d0e8e795623bd6229cf48bb7777a1c456c370ed upstream. The ti-ads1015 driver supports ADS1015 and ADS1115 devices. The same scale information is used for both devices in this driver, however they have actually different values and the ADS1115's one is not correct. These devices have the same full-scale input voltage range for each PGA selection. So instead of adding another hardcoded scale information, compute a correct scale on demand from each device's resolution. Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-09iio: adc: ti-ads1015: fix incorrect data rate setting updateAkinobu Mita
commit 0d106b74c558e3000aa0e058b4725cacb70ce77a upstream. The ti-ads1015 driver has eight iio voltage channels and each iio channel can hold own sampling frequency information. The ADS1015 device only have a single config register which contains an input multiplexer selection, PGA and data rate settings. So the driver should load the correct settings when the input multiplexer selection is changed. However, regardless of which channlel is currently selected, changing any iio channel's sampling frequency information immediately overwrites the current data rate setting in the config register. It breaks the current data rate setting if the different channel's sampling frequency information is changed because the data rate setting is not reloaded when the input multiplexer is switched. This removes the unexpected config register update and correctly load the data rate setting before getting adc result. Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30iio: hid-sensor-trigger: Fix the race with user space powering up sensorsSrinivas Pandruvada
commit f1664eaacec31035450132c46ed2915fd2b2049a upstream. It has been reported for a while that with iio-sensor-proxy service the rotation only works after one suspend/resume cycle. This required a wait in the systemd unit file to avoid race. I found a Yoga 900 where I could reproduce this. The problem scenerio is: - During sensor driver init, enable run time PM and also set a auto-suspend for 3 seconds. This result in one runtime resume. But there is a check to avoid a powerup in this sequence, but rpm is active - User space iio-sensor-proxy tries to power up the sensor. Since rpm is active it will simply return. But sensors were not actually powered up in the prior sequence, so actaully the sensors will not work - After 3 seconds the auto suspend kicks If we add a wait in systemd service file to fire iio-sensor-proxy after 3 seconds, then now everything will work as the runtime resume will actually powerup the sensor as this is a user request. To avoid this: - Remove the check to match user requested state, this will cause a brief powerup, but if the iio-sensor-proxy starts immediately it will still work as the sensors are ON. - Also move the autosuspend delay to place when user requested turn off of sensors, like after user finished raw read or buffer disable Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30iio: imu: adis16480: Fix acceleration scale factor for adis16480Dragos Bogdan
commit fdd0d32eb95f135041236a6885d9006315aa9a1d upstream. According to the datasheet, the range of the acceleration is [-10 g, + 10 g], so the scale factor should be 10 instead of 5. Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-16iio: adc: vf610_adc: Fix VALT selection value for REFSEL bitsStefan-Gabriel Mirea
commit d466d3c1217406b14b834335b5b4b33c0d45bd09 upstream. In order to select the alternate voltage reference pair (VALTH/VALTL), the right value for the REFSEL field in the ADCx_CFG register is "01", leading to 0x800 as register mask. See section 8.2.6.4 in the reference manual[1]. [1] http://www.nxp.com/docs/en/reference-manual/VFXXXRM.pdf Fixes: a775427632fd ("iio:adc:imx: add Freescale Vybrid vf610 adc driver") Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-16iio: light: tsl2563: use correct event codeAkinobu Mita
commit a3507e48d3f99a93a3056a34a5365f310434570f upstream. The TSL2563 driver provides three iio channels, two of which are raw ADC channels (channel 0 and channel 1) in the device and the remaining one is calculated by the two. The ADC channel 0 only supports programmable interrupt with threshold settings and this driver supports the event but the generated event code does not contain the corresponding iio channel type. This is going to change userspace ABI. Hopefully fixing this to be what it should always have been won't break any userspace code. Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-16iio: accel: bmc150: Always restore device to normal mode after suspend-resumeHans de Goede
commit e59e18989c68a8d7941005f81ad6abc4ca682de0 upstream. After probe we would put the device in normal mode, after a runtime suspend-resume we would put it back in normal mode. But for a regular suspend-resume we would only put it back in normal mode if triggers or events have been requested. This is not consistent and breaks reading raw values after a suspend-resume. This commit changes the regular resume path to also unconditionally put the device back in normal mode, fixing reading of raw values not working after a regular suspend-resume cycle. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-24iio: imu: inv_mpu6050: add accel lpf setting for chip >= MPU6500Jean-Baptiste Maneyrol
commit 948588e25b8af5e66962ed3f53e1cae1656fa5af upstream. Starting from MPU6500, accelerometer dlpf is set in a separate register named ACCEL_CONFIG_2. Add this new register in the map and set it for the corresponding chips. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-24iio: adc: ti_am335x_adc: allocating too much in probeDan Carpenter
commit 5ba5b437efaa7a502eec393c045d3bf90c92c4e9 upstream. We should be allocating enough information for a tiadc_device struct which is about 400 bytes but instead we allocate enough for a second iio_dev struct which is over 2000 bytes. Fixes: fea89e2dfcea ("iio: adc: ti_am335x_adc: use variable names for sizeof() operator") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-24iio: proximity: as3935: recalibrate RCO after resumeMatt Ranostay
commit 6272c0de13abf1480f701d38288f28a11b4301c4 upstream. According to the datasheet the RCO must be recalibrated on every power-on-reset. Also remove mutex locking in the calibration function since callers other than the probe function (which doesn't need it) will have a lock. Fixes: 24ddb0e4bba4 ("iio: Add AS3935 lightning sensor support") Cc: George McCollister <george.mccollister@gmail.com> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-24iio: st_pressure: Fix data signMarcin Niestroj
commit 1b211d48abaa0e12e6e6177c0316ff55d11fdfce upstream. Datasheet of each device (lps331ap, lps25h, lps001wp, lps22hb) says that the pressure and temperature data is a 2's complement. I'm sending this the slow way, as negative pressures on these are pretty unusual and the nature of the fixing of multiple device introduction patches will make it hard to apply to older kernels - Jonathan. Fixes: 217494e5b780 ("iio:pressure: Add STMicroelectronics pressures driver") Fixes: 2f5effcbd097 ("iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor") Fixes: 7885a8ce6800 ("iio: pressure: st: Add support for new LPS001WP pressure sensor") Fixes: e039e2f5b4da ("iio:st_pressure:initial lps22hb sensor support") Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14iio: proximity: as3935: fix iio_trigger_poll issueMatt Ranostay
commit 9122b54f266ddee09654fe3fbc503c1a60f4a01c upstream. Using iio_trigger_poll() can oops when multiple interrupts happen before the first is handled. Use iio_trigger_poll_chained() instead and use the timestamp when processed, since it will be in theory be 2 ms max latency. Fixes: 24ddb0e4bba4 ("iio: Add AS3935 lightning sensor support") Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14iio: proximity: as3935: fix AS3935_INT maskMatt Ranostay
commit 275292d3a3d62670b1b13484707b74e5239b4bb0 upstream. AS3935 interrupt mask has been incorrect so valid lightning events would never trigger an buffer event. Also noise interrupt should be BIT(0). Fixes: 24ddb0e4bba4 ("iio: Add AS3935 lightning sensor support") Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-09-30 20:07:06 +0000