summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2011-02-17Merge branches 'nes' and 'qib' into for-nextRoland Dreier
2011-02-17IB/qib: Prevent double completions after a timeout or RNR errorMike Marciniszyn
There is a double completion associated with error handling for RC QPs. The sequence is: - The do_rc_ack() routine fields an RNR nack and there are 0 rnr_retries configured on the QP. - qib_error_qp() stops the pending timer - qib_rc_send_complete() is called from sdma_complete() - qib_rc_send_complete() starts the timer because the msb of the psn just completed says an ack is needed. - a bunch of flushes occur as ipoib posts WQEs to an error'ed QP - rc_timeout() calls qib_restart_rc() - qib_restart_rc() calls qib_send_complete() with a IB_WC_RETRY_EXC_ERR on a wqe that has already been completed in the past The fix avoids starting the timer since another packet will never arrive. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-10IB/qib: Fix double add_timer()Mike Marciniszyn
The following panic BUG_ON occurs during qib testing: Kernel BUG at include/linux/timer.h:82 RIP [<ffffffff881f7109>] :ib_qib:start_timer+0x73/0x89 RSP <ffffffff80425bd0> <0>Kernel panic - not syncing: Fatal exception <0>Dumping qib trace buffer from panic qib_set_lid INFO: IB0:1 got a lid: 0xf8 Done dumping qib trace buffer BUG: warning at kernel/panic.c:137/panic() (Tainted: G The flaw is due to a missing state test when processing responses that results in an add_timer() call when the same timer is already queued. This code was executing in parallel with a QP destroy on another CPU that had changed the state to reset, but the missing test caused to response handling code to run on into the panic. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-03RDMA/nes: Don't generate async events for unregistered devicesMaciej Sosnowski
nes_port_ibevent() should not be called when the nes RDMA device is not registered with the RDMA core. Add missing checks of of_device_registered flag. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Update missed conversion of flush_scheduled_work() RDMA/ucma: Copy iWARP route information on queries RDMA/amso1100: Fix compile warnings RDMA/cxgb4: Set the correct device physical function for iWARP connections RDMA/cxgb4: Limit MAXBURST EQ context field to 256B IB/qib: Hold link for TX SERDES settings mlx4_core: Add ConnectX-3 device IDs
2011-01-29Merge branches 'amso1100', 'cma', 'cxgb4', 'misc', 'mlx4' and 'qib' into ↵Roland Dreier
for-next
2011-01-28RDMA: Update missed conversion of flush_scheduled_work()Tejun Heo
Commit f06267104dd9 ("RDMA: Update workqueue usage") introduced ib_wq and removed the use of flush_scheduled_work(); however, during the merge process one chunk was lost in ib_sa_remove_one(). Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28RDMA/ucma: Copy iWARP route information on queriesSteve Wise
For iWARP rdma_cm ids, the "route" information is the L2 src and next hop addresses. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28RDMA/amso1100: Fix compile warningsRalf Thielow
Fix compile warnings on 32-bit by using "0" instead of "(u64) NULL" to assign to "c2_vq_req->reply_msg". Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com> [ Change from "(unsigned long) NULL" to plain old "0" as suggested by Bart Van Assche <bvanassche@acm.org>. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28RDMA/cxgb4: Set the correct device physical function for iWARP connectionsSteve Wise
The PF passed to FW was 0, causing PCI failures in an SR-IOV environment. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28RDMA/cxgb4: Limit MAXBURST EQ context field to 256BSteve Wise
MAXBURST cannot exceed 256B for on-chip queues. With a 512B MAXBURST, we can lock up the chip. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-28IB/qib: Hold link for TX SERDES settingsMitko Haralanov
Hold the IB link at DISABLED until we get the correct TX settings on mezz boards. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Update workqueue usage RDMA/nes: Fix incorrect SFP+ link status detection on driver init RDMA/nes: Fix SFP+ link down detection issue with switch port disable RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE events RDMA/nes: Fix bonding on iw_nes IB/srp: Test only once whether iu allocation succeeded IB/mlx4: Handle protocol field in multicast table RDMA: Use vzalloc() to replace vmalloc()+memset(0) mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long) IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long)
2011-01-16Merge branches 'misc', 'mlx4', 'mthca', 'nes' and 'srp' into for-nextRoland Dreier
2011-01-16RDMA: Update workqueue usageTejun Heo
* ib_wq is added, which is used as the common workqueue for infiniband instead of the system workqueue. All system workqueue usages including flush_scheduled_work() callers are converted to use and flush ib_wq. * cancel_delayed_work() + flush_scheduled_work() converted to cancel_delayed_work_sync(). * qib_wq is removed and ib_wq is used instead. This is to prepare for deprecation of flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16RDMA/nes: Fix incorrect SFP+ link status detection on driver initMaciej Sosnowski
During iw_nes initialization the link status for SFP+ PHY is always detected as "up" regardless of real state (cable either connected or disconnected). Add SFP+ PHY specific link status detection to the iw_nes initialization procedure. Use link status recheck for netdev_open to detect delayed state updates. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16RDMA/nes: Fix SFP+ link down detection issue with switch port disableMaciej Sosnowski
In case of SFP+ PHY, link status check at interrupt processing can give false results. For proper link status change detection a delayed recheck is needed to give nes registers time to settle. Add a periodic link status recheck scheduled at interrupt to detect potential delayed registers state changes. Addresses: http://bugs.openfabrics.org/bugzilla/show_bug.cgi?id=2117 Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE eventsMaciej Sosnowski
Depending on link state change, IB_EVENT_PORT_ERR or IB_EVENT_PORT_ACTIVE should be generated when handling MAC interrupts. Plugging in a cable happens to result in series of interrupts changing driver's link state a number of times before finally staying at link up (e.g. link up, link down, link up, link down, ..., link up). To prevent sending series of redundant IB_EVENT_PORT_ACTIVE and IB_EVENT_PORT_ERR events, we use a timer to debounce them in nes_port_ibevent(). Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-16RDMA/nes: Fix bonding on iw_nesMaciej Sosnowski
Enable configuring bonds on nes devices by adding missing support for master net_device to the driver. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-13IB/srp: Test only once whether iu allocation succeededBart Van Assche
Merge the two tests in srp_queuecommand() of whether information unit allocation succeeded into one. An intended side effect of this change is that we fix the warning: drivers/infiniband/ulp/srp/ib_srp.c: In function 'srp_queuecommand': drivers/infiniband/ulp/srp/ib_srp.c:1116: warning: 'req' may be used uninitialized in this function (seen with CONFIG_CC_OPTIMIZE_FOR_SIZE=y at least with gcc 4.4.4) Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-12IB/mlx4: Handle protocol field in multicast tableAleksey Senin
The newest device firmware stores IB vs. Ethernet protocol in two bits in members_count field of multicast group table (0: Infiniband, 1: Ethernet). When changing the QP members count for a multicast group, it important not to reset this information. When calling multicast attach first time, the protocol type should be specified. In this patch we always set it IB, but in the future we will handle Ethernet too. When looking for a QP, the protocol type shoud be checked too. Signed-off-by: Aleksey Senin <alekseys@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12RDMA: Use vzalloc() to replace vmalloc()+memset(0)Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long)Roland Dreier
Some systems have PCI addresses that don't fit in unsigned long (eg some 32-bit PowerPC 440 systems have 36-bit bus addresses). Fix up mlx4 drivers by using phys_addr_t where appropriate, so we don't truncate any PCI resource addresses before ioremapping them. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-11IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long)John L. Burr
Some systems have PCI addresses that don't fit in unsigned long (eg some 32-bit PowerPC 440 systems have 36-bit bus addresses). Fix up the driver by using phys_addr_t where appropriate, so we don't truncate any PCI resource addresses before ioremapping them. Signed-off-by: John L. Burr <jlburr@cadence.com> [ Update to apply to current driver source. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits) IB/qib: Fix refcount leak in lkey/rkey validation IB/qib: Improve SERDES tunning on QMH boards IB/qib: Unnecessary delayed completions on RC connection IB/qib: Issue pre-emptive NAKs on eager buffer overflow IB/qib: RDMA lkey/rkey validation is inefficient for large MRs IB/qib: Change QPN increment IB/qib: Add fix missing from earlier patch IB/qib: Change receive queue/QPN selection IB/qib: Fix interrupt mitigation IB/qib: Avoid duplicate writes to the rcv head register IB/qib: Add a few new SERDES tunings IB/qib: Reset packet list after freeing IB/qib: New SERDES init routine and improvements to SI quality IB/qib: Clear WAIT_SEND flags when setting QP to error state IB/qib: Fix context allocation with multiple HCAs IB/qib: Fix multi-Florida HCA host panic on reboot IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE better IB/qib: UD send with immediate receive completion has wrong size IB/qib: Set port physical state even if other fields are invalid IB/qib: Generate completion callback on errors ...
2011-01-10Merge branches 'cxgb4', 'ipath', 'ipoib', 'mlx4', 'mthca', 'nes', 'qib' and ↵Roland Dreier
'srp' into for-next
2011-01-10IB/qib: Fix refcount leak in lkey/rkey validationMike Marciniszyn
The mr optimization introduced a reference count leak on an exception test. The lock/refcount manipulation is moved down and the problematic exception test now calls bail to insure that the lock is released. Additional fixes as suggested by Ralph Campbell <ralph.campbell@qlogic.org>: - reduce lock scope of dma regions - use explicit values on returns vs. automatic ret value Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Improve SERDES tunning on QMH boardsMike Marciniszyn
Improve the QMH SERDES tunning on initial driver load by having the driver go through a link state change. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Unnecessary delayed completions on RC connectionMike Marciniszyn
Currently on receipt of a response message (ACKs, RDMA Response, Atomic Responses etc.) if the SDMA completion counter is not advanced the driver delays the completion of the WQE. In most cases this is overly pessimistic as the response (ACK) to a previously transmitted send implies that the send is complete. Ensure that SDMA queue is progressed appropriately before determining if a send has delayed completions. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Issue pre-emptive NAKs on eager buffer overflowMike Marciniszyn
Under congestion resulting in eager buffer overflow attempt to send pre-emptive NAKs if header queue entries with TID errors are generated and a valid header is present. This prevents long timeouts and flow restarts if a trailing set of packets are dropped due to eager overflows. Pre-emptive NAKs are currently only supported for RDMA writes. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: RDMA lkey/rkey validation is inefficient for large MRsMike Marciniszyn
The current code loops during rkey/lkey validiation to isolate the MR for the RDMA, which is expensive when the current operation is inside a very large memory region. This fix optimizes rkey/lkey validation routines for user memory regions and fast memory regions. The MR entry can be isolated by shifts/mods instead of looping. The existing loop is preserved for phys memory regions for now. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Change QPN incrementMike Marciniszyn
Changing from +1 to +2 allows for better QP distribution across receive contexts. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add fix missing from earlier patchMike Marciniszyn
The upstream code was missing part of a receive/error race fix from the internal tree. Add the missing part, which makes future merges possible. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Change receive queue/QPN selectionMike Marciniszyn
The basic idea is that on SusieQ, the difficult part of mapping QPN to context is handled by the mapping registers so the generic QPN allocation doesn't need to worry about chip specifics. For Monty and Linda, there is no mapping table so the qpt->mask (same as dd->qpn_mask), is used to see if the QPN to context falls within [zero..dd->n_krcv_queues). Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Fix interrupt mitigationMike Marciniszyn
For SusieQ we need to write to the interrupt timer register before updating the header queue head with interrupt count. This is to ensure that the timer is enabled properly and a receive available interrupt is delivered. Otherwise this interrupt can be lost if the receiver header/eager queues are full before the timer is enabled. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Avoid duplicate writes to the rcv head registerMike Marciniszyn
Avoid duplicate writes to the head register as this can lead to lost interrupts if the context goes full before the second write is done. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add a few new SERDES tuningsMike Marciniszyn
Add new SERDES tuning to aid manufacturing. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Reset packet list after freeingMike Marciniszyn
Reset the list pointers after freeing the SDMA packet list. This is done to any potential double-free cases. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: New SERDES init routine and improvements to SI qualityMike Marciniszyn
Implement new SERDES initialization routine and improvements to signal integrity -- disable LE1 adaptation, disable LOS after link-up, set better SERDES parameters. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Clear WAIT_SEND flags when setting QP to error stateMike Marciniszyn
If these flags are set when the QP is transitioned to the error state, it will wait until the flags are cleared, which may never happen if the error transition is due to a link going down. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Fix context allocation with multiple HCAsMike Marciniszyn
The driver was incorrectly choosing HCAs on which to allocate new user contexts based on overall count of usable ports regardless whether the usable port was on the currently selected HCA. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Fix multi-Florida HCA host panic on rebootMike Marciniszyn
Add check when setting configured contexts that the value does not exceed the number of contexts allocated for the card. If the value exceeds the already allocated count, set it to what is already allocated. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE betterMike Marciniszyn
When the link transitions from ACTIVE_DEFERRED to ACTIVE, the driver only sees the ACTIVE state. With this change, it will check whether the state was already ACTIVE and if so, it will not generated IB events and will not clear symbol error counts. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: UD send with immediate receive completion has wrong sizeMike Marciniszyn
The code to generate receive completion entries for UD send with immediate contains the wrong payload length. This is because when the code to compute the payload size was moved, the value of hdrsize didn't get moved too. The fix is to update tlen directly. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Set port physical state even if other fields are invalidMike Marciniszyn
The IBTA vol. 1 release 1.2.1 spec. says: C14-24.2.1: If PortInfo:Portstate=Down, then a SubnSet(PortInfo) shall make any changes it specifies to PortInfo:PortPhysicalState; any other result is vendor-dependent. The patch changes the error handling so that the reply says there are invalid fields but still attempts to set fields that are in range including PortInfo:PortPhysicalState. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Generate completion callback on errorsMike Marciniszyn
According to IBTA vol. 1, C11-30.1.1, a notification callback is invoked if the CQ is armed for the next solicited completion event or an error completion. The error case wasn't being generated correctly. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add support for the new QME7362 cardMike Marciniszyn
Add support to recognize another board variation named QME7362. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add receive header queue size module parametersMike Marciniszyn
The receive header queue sizes need to modified for performance tuning. Three module parameters are added to support this. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-02 16:29:28 +0000