summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2013-04-05firmware,IB/qib: revert firmware file moveMike Marciniszyn
Commit e2eed58b4fbf ("IB/qib: change QLogic to Intel") moved a firmware file potentially breaking the ABI. This patch reverts that aspect of the fix as well as reverting the firmware name as used in qib. Reported-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-25Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fixes from Roland Dreier: "Small batch of InfiniBand/RDMA fixes for 3.9: - Fix for TX lockup in IPoIB - QLogic -> Intel update for qib driver - Small static checker fix for qib - Fix error path return value in cxgb4" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: change QLogic to Intel IB/ipath: Silence a static checker warning IPoIB: Fix send lockup due to missed TX completion RDMA/cxgb4: Fix error return code in create_qp()
2013-03-22Merge branches 'cxgb4', 'ipoib' and 'qib' into for-nextRoland Dreier
2013-03-22IB/qib: change QLogic to IntelVinit Agnihotri
These changes modify the qib driver as part of acquiring the InfiniBand assets of QLogic. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-03-22IB/ipath: Silence a static checker warningDan Carpenter
I have a static checker which complains that 0x255 is too high for the "dev->opstats[opcode]" array. It turns out that the hardware has already validated the opcode at this point so it can't actually overflow. However, silencing the warning is good and this matches how the opcode is treated in qib_ib_rcv() as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-03-22IPoIB: Fix send lockup due to missed TX completionMike Marciniszyn
Commit f0dc117abdfa ("IPoIB: Fix TX queue lockup with mixed UD/CM traffic") attempts to solve an issue where unprocessed UD send completions can deadlock the netdev. The patch doesn't fully resolve the issue because if more than half the tx_outstanding's were UD and all of the destinations are RC reachable, arming the CQ doesn't solve the issue. This patch uses the IB_CQ_REPORT_MISSED_EVENTS on the ib_req_notify_cq(). If the rc is above 0, the UD send cq completion callback is called directly to re-arm the send completion timer. This issue is seen in very large parallel filesystem deployments and the patch has been shown to correct the issue. Cc: <stable@vger.kernel.org> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-03-22RDMA/cxgb4: Fix error return code in create_qp()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix ARM BPF JIT handling of negative 'k' values, from Chen Gang. 2) Insufficient space reserved for bridge netlink values, fix from Stephen Hemminger. 3) Some dst_neigh_lookup*() callers don't interpret error pointer correctly, fix from Zhouyi Zhou. 4) Fix transport match in SCTP active_path loops, from Xugeng Zhang. 5) Fix qeth driver handling of multi-order SKB frags, from Frank Blaschka. 6) fec driver is missing napi_disable() call, resulting in crashes on unload, from Georg Hofmann. 7) Don't try to handle PMTU events on a listening socket, fix from Eric Dumazet. 8) Fix timestamp location calculations in IP option processing, from David Ward. 9) FIB_TABLE_HASHSZ setting is not controlled by the correct kconfig tests, from Denis V Lunev. 10) Fix TX descriptor push handling in SFC driver, from Ben Hutchings. 11) Fix isdn/hisax and tulip/de4x5 kconfig dependencies, from Arnd Bergmann. 12) bnx2x statistics don't handle 4GB rollover correctly, fix from Maciej Żenczykowski. 13) Openvswitch bug fixes for vport del/new error reporting, missing genlmsg_end() call in netlink processing, and mis-parsing of LLC/SNAP ethernet types. From Rich Lane. 14) SKB pfmemalloc state should only be propagated from the head page of a compound page, fix from Pavel Emelyanov. 15) Fix link handling in tg3 driver for 5715 chips when autonegotation is disabled. From Nithin Sujir. 16) Fix inverted test of cpdma_check_free_tx_desc return value in davinci_emac driver, from Mugunthan V N. 17) vlan_depth is incorrectly calculated in skb_network_protocol(), from Li RongQing. 18) Fix probing of Gobi 1K devices in qmi_wwan driver, and fix NCM device mode backwards compat in cdc_ncm driver. From Bjørn Mork. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) inet: limit length of fragment queue hash table bucket lists qeth: Fix scatter-gather regression qeth: Fix invalid router settings handling qeth: delay feature trace tcp: dont handle MTU reduction on LISTEN socket bnx2x: fix occasional statistics off-by-4GB error vhost/net: fix heads usage of ubuf_info bridge: Add support for setting BR_ROOT_BLOCK flag. bnx2x: add missing napi deletion in error path drivers: net: ethernet: ti: davinci_emac: fix usage of cpdma_check_free_tx_desc() ethernet/tulip: DE4x5 needs VIRT_TO_BUS isdn: hisax: netjet requires VIRT_TO_BUS net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards compatibility rtnetlink: Mask the rta_type when range checking Revert "ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally" Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug smsc75xx: configuration help incorrectly mentions smsc95xx net: fec: fix missing napi_disable call net: fec: restart the FEC when PHY speed changes skb: Propagate pfmemalloc on skb from head page only ...
2013-03-15Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bugZhouyi Zhou
When neighbour table is full, dst_neigh_lookup/dst_neigh_lookup_skb will return -ENOBUFS which is absolutely non zero, while all the code in kernel which use above functions assume failure only on zero return which will cause panic. (for example: : https://bugzilla.kernel.org/show_bug.cgi?id=54731). This patch corrects above error with smallest changes to kernel source code and also correct two return value check missing bugs in drivers/infiniband/hw/cxgb4/cm.c Tested on my x86_64 SMP machine Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13mlx4: remove leftover idr_pre_get() callTejun Heo
Commit 6a9200603d76 ("IB/mlx4: convert to idr_alloc()") forgot to remove idr_pre_get() call in mlx4_ib_cm_paravirt_init(). It's unnecessary and idr_pre_get() will soon be deprecated. Remove it. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jack Morgenstein <jackm@dev.mellanox.co.il> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-03fs: Limit sys_mount to only request filesystem modules.Eric W. Biederman
Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27idr: remove MAX_IDR_MASK and move left MAX_IDR_* into idr.cTejun Heo
MAX_IDR_MASK is another weirdness in the idr interface. As idr covers whole positive integer range, it's defined as 0x7fffffff or INT_MAX. Its usage in idr_find(), idr_replace() and idr_remove() is bizarre. They basically mask off the sign bit and operate on the rest, so if the caller, by accident, passes in a negative number, the sign bit will be masked off and the remaining part will be used as if that was the input, which is worse than crashing. The constant is visible in idr.h and there are several users in the kernel. * drivers/i2c/i2c-core.c:i2c_add_numbered_adapter() Basically used to test if adap->nr is a negative number which isn't -1 and returns -EINVAL if so. idr_alloc() already has negative @start checking (w/ WARN_ON_ONCE), so this can go away. * drivers/infiniband/core/cm.c:cm_alloc_id() drivers/infiniband/hw/mlx4/cm.c:id_map_alloc() Used to wrap cyclic @start. Can be replaced with max(next, 0). Note that this type of cyclic allocation using idr is buggy. These are prone to spurious -ENOSPC failure after the first wraparound. * fs/super.c:get_anon_bdev() The ID allocated from ida is masked off before being tested whether it's inside valid range. ida allocated ID can never be a negative number and the masking is unnecessary. Update idr_*() functions to fail with -EINVAL when negative @id is specified and update other MAX_IDR_MASK users as described above. This leaves MAX_IDR_MASK without any user, remove it and relocate other MAX_IDR_* constants to lib/idr.c. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: "Marciniszyn, Mike" <mike.marciniszyn@intel.com> Cc: Jack Morgenstein <jackm@dev.mellanox.co.il> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Wolfram Sang <wolfram@the-dreams.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27IB/qib: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Mike Marciniszyn <infinipath@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27IB/ocrdma: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27IB/mlx4: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jack Morgenstein <jackm@dev.mellanox.co.il> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27IB/ipath: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. [yongjun_wei@trendmicro.com.cn: use GFP_NOWAIT under spin lock] Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27IB/ehca: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27IB/cxgb4: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27IB/cxgb3: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27IB/amso1100: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Cc: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27IB/core: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. v2: Mike triggered WARN_ON() in idr_preload() because send_mad(), which may be used from non-process context, was calling idr_preload() unconditionally. Preload iff @gfp_mask has __GFP_WAIT. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reported-by: "Marciniszyn, Mike" <mike.marciniszyn@intel.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband update from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.9: - SRP error handling fixes from Bart Van Assche - Implementation of memory windows for mlx4 from Shani Michaeli - Lots of cxgb4 HW driver fixes from Vipul Pandya - Make iSER work for virtual functions, other fixes from Or Gerlitz - Fix for bug in qib HW driver from Mike Marciniszyn - IPoIB fixes from me, Itai Garbi, Shlomo Pongratz, Yan Burman - Various cleanups and warning fixes from Julia Lawall, Paul Bolle, Wei Yongjun" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (41 commits) IB/mlx4: Advertise MW support IB/mlx4: Support memory window binding mlx4: Implement memory windows allocation and deallocation mlx4_core: Enable memory windows in {INIT, QUERY}_HCA mlx4_core: Disable memory windows for virtual functions IPoIB: Free ipoib neigh on path record failure so path rec queries are retried IB/srp: Fail I/O requests if the transport is offline IB/srp: Avoid endless SCSI error handling loop IB/srp: Avoid sending a task management function needlessly IB/srp: Track connection state properly IB/mlx4: Remove redundant NULL check before kfree IB/mlx4: Fix compiler warning about uninitialized 'vlan' variable IB/mlx4: Convert is_xxx variables in build_mlx_header() to bool IB/iser: Enable iser when FMRs are not supported IB/iser: Avoid error prints on EAGAIN registration failures IB/iser: Use proper define for the commands per LUN value advertised to SCSI ML IB/uverbs: Implement memory windows support in uverbs IB/core: Add "type 2" memory windows support mlx4_core: Propagate MR deregistration failures to caller mlx4_core: Rename MPT-related functions to have mpt_ prefix ...
2013-02-26Merge branches 'core', 'cxgb4', 'ipoib', 'iser', 'misc', 'mlx4', 'qib' and ↵Roland Dreier
'srp' into for-next
2013-02-25IB/mlx4: Advertise MW supportShani Michaeli
Indicate memory windows support through device capabilities, kernel verb entries and the relevant uverbs command mask entries. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/mlx4: Support memory window bindingShani Michaeli
* Implement memory windows binding in mlx4_ib_post_send. * Implement mlx4_ib_bind_mw by deferring to mlx4_ib_post_send. * Rename MLX4_WQE_FMR_PERM_* flags to MLX4_WQE_FMR_AND_BIND_PERM_*, indicating that they are used both for fast registration work requests, and for memory window bind work requests. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25mlx4: Implement memory windows allocation and deallocationShani Michaeli
Implement MW allocation and deallocation in mlx4_core and mlx4_ib. Pass down the enable bind flag when registering memory regions. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IPoIB: Free ipoib neigh on path record failure so path rec queries are retriedRoland Dreier
If IPoIB fails to look up a path record (eg if it tries during an SM failover when one SM is dead but the new one hasn't taken over yet), the driver ends up with a neighbour structure but no address handle (AH). There's no mechanism to recover from this: any further packets sent to this destination will be silently dumped in ipoib_start_xmit(). Fix this by freeing the neighbour structures when a path rec query fails, so that the next packet queued to be sent will trigger a new path record query. Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/srp: Fail I/O requests if the transport is offlineBart Van Assche
If an SRP target is no longer reachable and srp_reset_host() fails to reconnect then ib_srp will invoke scsi_remove_host(). That function will invoke __scsi_remove_device() for each LUN. And that last function will change the device state from SDEV_TRANSPORT_OFFLINE into SDEV_CANCEL. Certain user space software, e.g. older versions of multipathd, continue queueing I/O to SCSI devices that are in the SDEV_CANCEL state. If these I/O requests are submitted as SG_IO that means that the REQ_PREEMPT flag will be set and hence that these requests will be passed to srp_queuecommand(). These requests will time out. If new requests are queued fast enough from user space these active requests will prevent __scsi_remove_device() to finish. Avoid this by failing I/O requests in the SDEV_CANCEL state if the transport is offline. Introduce a new variable to keep track of the transport state instead of failing requests if (!target->connected || target->qp_in_error), so that the SCSI error handler has a chance to retry commands after a transport layer failure occurred. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/srp: Avoid endless SCSI error handling loopBart Van Assche
If a SCSI command times out it is passed to the SCSI error handler. The SCSI error handler will try to abort the commands that timed out. If aborting fails, a device reset will be attempted. If the device reset also fails a host reset will be attempted. If the host reset also fails the whole procedure will be repeated. srp_abort() and srp_reset_device() fail for a QP in the error state. srp_reset_host() fails after host removal has started. Hence if the SCSI error handler gets invoked after host removal has started and with the QP in the error state an endless loop will be triggered. Modify the SCSI error handling functions in ib_srp as follows: - Abort SCSI commands properly even if the QP is in the error state. - Make srp_reset_host() reset SCSI requests even after host removal has already started or if reconnecting fails. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dave@thedillows.org> Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/srp: Avoid sending a task management function needlesslyBart Van Assche
Do not send a task management function if sending will fail anyway because either there is no RDMA/RC connection or the QP is in the error state. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dave@thedillows.org> Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/srp: Track connection state properlyBart Van Assche
Remove an assignment that incorrectly overwrites the connection state update by srp_connect_target(). Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dave@thedillows.org> Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/mlx4: Remove redundant NULL check before kfreeSyam Sidhardhan
kfree on NULL pointer is a no-op. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/mlx4: Fix compiler warning about uninitialized 'vlan' variablePaul Bolle
Building qp.o triggers this gcc warning: drivers/infiniband/hw/mlx4/qp.c: In function ‘mlx4_ib_post_send’: drivers/infiniband/hw/mlx4/qp.c:1862:62: warning: ‘vlan’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/infiniband/hw/mlx4/qp.c:1752:6: note: ‘vlan’ was declared here Looking at the code it is clear 'vlan' is only set and used if 'is_eth' is non-zero. But by initializing 'vlan' to 0xffff, on gcc (Ubuntu 4.7.2-22ubuntu1) 4.7.2 on x86-64 at least, we fix the warning, and the compiler was already setting 'vlan' to 0 in the generated code, so there's no real downside. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> [ Get rid of unnecessary move of 'is_vlan' initialization. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-25IB/mlx4: Convert is_xxx variables in build_mlx_header() to boolRoland Dreier
Matches the way they're used, and actually lets at least x86-64 generate better code: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-38 (-38) function old new delta mlx4_ib_post_send 4416 4378 -38 Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-22new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22IB/iser: Enable iser when FMRs are not supportedOr Gerlitz
Reuse the "SG unaligned for FMR" driver flow to make the initiator functional when running over driver instance which doesn't support FMRs, such as a mlx4 virtual function. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Alex Tabachnik <alext@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-22IB/iser: Avoid error prints on EAGAIN registration failuresOr Gerlitz
Under IO/CPU stress its possible that the FMR pool might not have a free FMR mapping element for iSER to use because of incomplete background unmapping processing. In that case we get -EAGAIN and the IO is pushed back to the SCSI layer which soon retries it. No need to be so verbose about that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-22IB/iser: Use proper define for the commands per LUN value advertised to SCSI MLOr Gerlitz
ISER_DEF_CMD_PER_LUN was meant to be ISCSI_DEF_XMIT_CMDS_MAX, not plain 128 Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Assorted tiny fixes queued in trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (22 commits) DocBook: update EXPORT_SYMBOL entry to point at export.h Documentation: update top level 00-INDEX file with new additions ARM: at91/ide: remove unsused at91-ide Kconfig entry percpu_counter.h: comment code for better readability x86, efi: fix comment typo in head_32.S IB: cxgb3: delay freeing mem untill entirely done with it net: mvneta: remove unneeded version.h include time: x86: report_lost_ticks doesn't exist any more pcmcia: avoid static analysis complaint about use-after-free fs/jfs: Fix typo in comment : 'how may' -> 'how many' of: add missing documentation for of_platform_populate() btrfs: remove unnecessary cur_trans set before goto loop in join_transaction sound: soc: Fix typo in sound/codecs treewide: Fix typo in various drivers btrfs: fix comment typos Update ibmvscsi module name in Kconfig. powerpc: fix typo (utilties -> utilities) of: fix spelling mistake in comment h8300: Fix home page URL in h8300/README xtensa: Fix home page URL in Kconfig ...
2013-02-21IB/uverbs: Implement memory windows support in uverbsShani Michaeli
The existing user/kernel uverbs API has IB_USER_VERBS_CMD_ALLOC/DEALLOC_MW. Implement these calls, along with destroying user memory windows during process cleanup. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-21IB/core: Add "type 2" memory windows supportShani Michaeli
This patch enhances the IB core support for Memory Windows (MWs). MWs allow an application to have better/flexible control over remote access to memory. Two types of MWs are supported, with the second type having two flavors: Type 1 - associated with PD only Type 2A - associated with QPN only Type 2B - associated with PD and QPN Applications can allocate a MW once, and then repeatedly bind the MW to different ranges in MRs that are associated to the same PD. Type 1 windows are bound through a verb, while type 2 windows are bound by posting a work request. The 32-bit memory key is composed of a 24-bit index and an 8-bit key. The key is changed with each bind, thus allowing more control over the peer's use of the memory key. The changes introduced are the following: * add memory window type enum and a corresponding parameter to ib_alloc_mw. * type 2 memory window bind work request support. * create a struct that contains the common part of the bind verb struct ibv_mw_bind and the bind work request into a single struct. * add the ib_inc_rkey helper function to advance the tag part of an rkey. Consumer interface details: * new device capability flags IB_DEVICE_MEM_WINDOW_TYPE_2A and IB_DEVICE_MEM_WINDOW_TYPE_2B are added to indicate device support for these features. Devices can set either IB_DEVICE_MEM_WINDOW_TYPE_2A or IB_DEVICE_MEM_WINDOW_TYPE_2B if it supports type 2A or type 2B memory windows. It can set neither to indicate it doesn't support type 2 windows at all. * modify existing provides and consumers code to the new param of ib_alloc_mw and the ib_mw_bind_info structure Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-21mlx4_core: Propagate MR deregistration failures to callerShani Michaeli
MR deregistration fails when memory windows are bound to the MR. Handle such failures by propagating them to the caller ULP. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-21IB/mlx4_ib: Remove local invalidate segment unused fieldsShani Michaeli
Remove unused fields from the local invalidate WQE segment structure. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-19IPoIB: Don't attempt to release resources on error flowItai Garbi
If the ipoib client info isn't found on the _remove_one callback, we must not attempt to scan the returned null list. Found by Coverity. Signed-off-by: Itai Garbi <igarbi@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-19IPoIB: Add version and firmware info to ethtool reportingYan Burman
Implement version info as well as report firmware version and bus info of the underlying IB HW device. Signed-off-by: Yan Burman <yanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-19IPoIB: Fix ipoib_neigh hashing to use the correct daddr octetsShlomo Pongratz
The hash function introduced in commit b63b70d877 ("IPoIB: Use a private hash table for path lookup in xmit path") was designd to use the 3 octets of the IPoIB HW address that holds the remote QPN. However, this currently isn't the case on little-endian machines, because the the code there uses the flags part (octet[0]) and not the last octet of the QPN (octet[3]). Fix this. The fix caused a checkpatch warning on line over 80 characters, to solve that changed the name of the temp variable that holds the daddr. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-15IB/mlx4: Adjust duplicate testJulia Lawall
Delete successive tests to the same location. The code tested the result of a previous allocation, that itself was already tested. It is changed to test the result of the most recent allocation. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-02-15IB/mlx4: Fix bug unwinding on error in mlx4_ib_init_sriov()Dan Carpenter
We have to decrement "i" before calling mlx4_ib_free_demux_ctx() or we free something that wasn't allocated. That's fine for free_pv_object() but it would lead to a NULL dereference calling mlx4_ib_free_demux_ctx(). The null dereference is because ->tun is NULL when we check: if (!ctx->tun[i]) Also we didn't free ->sriov.demux[0] so it was a small leak. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>