summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen/Makefile
AgeCommit message (Collapse)Author
2013-06-30Input: cyttsp4 - SPI driver for Cypress TMA4XX touchscreen devicesFerruh Yigit
Cypress TrueTouch(tm) Standard Product controllers, Generation4 devices, SPI adapter module. This driver adds communication support with TTSP controller using SPI bus. Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-30Input: cyttsp4 - I2C driver for Cypress TMA4XX touchscreen devicesFerruh Yigit
Cypress TrueTouch(tm) Standard Product controllers, Generation4 devices, I2C adapter module. This driver adds communication support with TTSP controller using I2C bus. Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-30Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devicesFerruh Yigit
Cypress TrueTouch(tm) Standard Product controllers, Generetion4 devices, Core driver. Core driver is interface between host and TTSP controller and processes data sent by controller. Responsibilities of module are IRQ handling, reading system information registers and sending multi-touch protocol type B events. Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-30Input: cyttsp - I2C driver split into two modulesFerruh Yigit
Existing I2C code is for TrueTouch Gen3 devices TrueTouch Gen4 device is using same protocol, will split driver into two pieces to use common code with both drivers. Read/Write functions parameter list modified, since shared code will be used by two separate drivers and these drivers are not sharing same structs, parameters updated to use common structures. Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "As usual, there are a couple of new drivers, input core now supports managed input devices (devres), a slew of drivers now have device tree support and a bunch of fixes and cleanups." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits) Input: walkera0701 - fix crash on startup Input: matrix-keymap - provide a proper module license Input: gpio_keys_polled - switch to using gpio_request_one() Input: gpio_keys - switch to using gpio_request_one() Input: wacom - fix touch support for Bamboo Fun CTH-461 Input: xpad - add a few new VID/PID combinations Input: xpad - minor formatting fixes Input: gpio-keys-polled - honor 'autorepeat' setting in platform data Input: tca8418-keypad - switch to using managed resources Input: tca8418_keypad - increase severity of failures in probe() Input: tca8418_keypad - move device ID tables closer to where they are used Input: tca8418_keypad - use dev_get_platdata() to retrieve platform data Input: tca8418_keypad - use a temporary variable for parent device Input: tca8418_keypad - add support for shared interrupt Input: tca8418_keypad - add support for device tree bindings Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driver Input: bu21013_ts - add support for Device Tree booting Input: bu21013_ts - move GPIO init and exit functions into the driver Input: bu21013_ts - request regulator that actually exists ARM: ux500: Strip out duplicate touch screen platform information ...
2012-11-27Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driverAlexander Shiyan
The kernel does not contain the symbol SA1100_BITSY so the driver is never compiled and can be removed safely. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-05input: TSC: ti_tscadc: Rename the existing touchscreen driverPatil, Rachna
Make way for addition of MFD driver. The existing touchsreen driver is a MFD client. For better readability we rename the file to indicate its functionality as only touchscreen. Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-24Input: add driver for FT5x06 based EDT displaysSimon Budig
This is a driver for the EDT "Polytouch" family of touch controllers based on the FocalTech FT5x06 line of chips. Signed-off-by: Simon Budig <simon.budig@kernelconcepts.de> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-17Input: add MELFAS mms114 touchscreen driverJoonyoung Shim
This is a initial driver for new touchscreen chip mms114 of MELFAS. It uses I2C interface and supports 10 multi touch. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-04-29Input: add support for DA9052/53 touch screen controllerAshish Jangam
This driver adds support for DA9052/53 4-wire resistive ADC interfaced touchscreen controller. DA9052/53 is a multi-function device, therefore this driver depends on DA9052/53 core. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: add support for Wacom Stylus device with I2C interfaceTatsunosuke Tobita
This adds support for Wacom Stylus device with I2C interface. [Dan Carpenter <dan.carpenter@oracle.com>: fix NULL-pointer dereference in error handling path.] Signed-off-by: Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-17Input: ili210x - add support for Ilitek ILI210x based touchscreensOlivier Sobrie
The driver supports chipsets ILI2102, ILI2102s, ILI2103, ILI2103s and ILI2105. Such kind of controllers can be found in Amazon Kindle Fire devices. Reviewed-by: Jan Paesmans <jan.paesmans@gmail.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-04Input: add support for TI Touchscreen controllerRachna Patil
This patch adds support for TI's touchscreen controller for a 4/5/8 wire resistive panel that is directly fed to the ADC. This touchscreen controller will be part of AM335x TI SoC. The TRM can be found at: http://www.ti.com/lit/ug/spruh73a/spruh73a.pdf Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-31Input: add Cypress TTSP capacitive multi-touch screen supportJavier Martinez Canillas
Cypress TrueTouch(tm) Standard Product controllers are found in a wide range of embedded devices. This driver add support for a variety of TTSP controllers. Since the hardware is capable of tracking identifiable contacts, multi-touch protocol type B (stateful) is used to report contact information. The driver is composed of a core driver that process the data sent by the contacts and a set of bus specific interface modules. This patch adds the base core TTSP driver. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-30Input: add driver for pixcir i2c touchscreensJianchun Bian
This patch adds a driver for PIXCIR's I2C connected touchscreens. Signed-off-by: Jianchun <jcbian@pixcir.com.cn> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-27Input: add driver for AUO In-Cell touchscreens using pixcir ICsHeiko Stübner
Some displays from AUO have a so called in-cell touchscreen, meaning it is built directly into the display unit. Touchdata is gathered through PIXCIR Tango-ICs and processed in an Atmel ATmega168P with custom firmware. Communication between the host system and ATmega is done via I2C. Devices using this touch solution include the Dell Streak5 and the family of Qisda ebook readers. The driver reports single- and multi-touch events including touch area values. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-15Input: add EETI eGalax I2C capacitive multi touch driverZhang Jiejing
This patch adds the EETI eGalax serial multi touch controller driver. EETI eGalax serial touch screen controller is a I2C based multiple capacitive touch screen controller, it can support 5 touch events maximum. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-28Input: add a driver for TSC-40 serial touchscreenSebastian Andrzej Siewior
This patch adds the TSC-40 serial touchscreen driver and should be compatible with TSC-10 and TSC-25. The driver was written by Linutronix on behalf of Bachmann electronic GmbH. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-11Input: add driver for Maxim max11801 touchscreen controllerZhang Jiejing
Add MAXI max11801 resistive touchscreen controller driver. This driver uses Auto Mode and Aperture Mode. Support for other max1180x devices can be added to this driver as well, as they use almost the same register addresses and codes. You can find data sheet here: http://www.maxim-ic.com/datasheet/index.mvp/id/5943 Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Merge branch 'tsc2005' into nextDmitry Torokhov
2011-03-16Input: introduce tsc2005 driverLauri Leukkunen
Discussions: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg26748.html Introduce a driver for the Texas Instruments TSC2005 touchscreen controller (http://focus.ti.com/docs/prod/folders/print/tsc2005.html). The patch is based on a driver by Lauri Leukkunen, with modifications by David Brownell, Phil Carmody, Imre Deak, Hiroshi DOYU, Ari Kauppi, Tony Lindgren, Jarkko Nikula, Eero Nurkkala and Roman Tereshonkov. Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com> [aaro.koskinen@nokia.com: patch description, rebasing & cleanup] Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> [ext-srikar.1.bhavanarayana@nokia.com: various fixes] Signed-off-by: Srikar <ext-srikar.1.bhavanarayana@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: qt602240_ts - rename to atmel_mxt_tsDmitry Torokhov
Since the driver will be supporting whole range of Atmels mXT touchscreen controllers we better rename it to atmel_mxt_ts. Acked-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllersMark Brown
Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-15Input: add ST1232 touchscreen controller driverTony SIM
This patch introduces support for Sitronix ST1232 integrated capacitive touchscreen with LCD module. The touchscreen is multitouch capable and can report coordinates of up to two contact points. Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com> Reviewed-by: Trilok Soni <tsoni@codeaurora.org> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-25Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (50 commits) davinci: fix remaining board support after io_pgoffst removal davinci: mityomapl138: make file local data static arm/davinci: remove duplicated include davinci: Initial support for Omapl138-Hawkboard davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom davinci: add tnetv107x touchscreen platform device input: add driver for tnetv107x touchscreen controller davinci: add keypad config for tnetv107x evm board davinci: add tnetv107x keypad platform device input: add driver for tnetv107x on-chip keypad controller net: davinci_emac: cleanup unused cpdma code net: davinci_emac: switch to new cpdma layer net: davinci_emac: separate out cpdma code net: davinci_emac: cleanup unused mdio emac code omap: cleanup unused davinci mdio arch code davinci: cleanup mdio arch code and switch to phy_id net: davinci_emac: switch to new mdio omap: add mdio platform devices davinci: add mdio platform devices net: davinci_emac: separate out davinci mdio ... Fix up trivial conflict in drivers/input/keyboard/Kconfig (two entries added next to each other - one from the davinci merge, one from the input merge)
2010-10-13Input: add ROHM BU21013 touch panel controller supportNaveen Kumar Gaddipati
Add the ROHM BU21013 capacitive touch panel controller support with i2c interface. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-24input: add driver for tnetv107x touchscreen controllerCyril Chemparathy
This patch adds support for tnetv107x's on-chip touchscreen controller. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-05Merge branch 'mrst-touchscreen' into nextDmitry Torokhov
Conflicts: drivers/input/touchscreen/Makefile
2010-09-01Input: mrst-touchscreen - move out of stagingDmitry Torokhov
The driver is in reasonable shape now so let's move it out of staging. Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-28Input: add LPC32xx touchscreen controller driverKevin Wells
This patch set introduces support for the LPC32xx touchscreen controller driver. The LPC32xx touchscreen controller supports automated event detection and X/Y data conversion for resistive touchscreens. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Durgesh Pattamatta <durgesh.pattamatta@nxp.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-12input: STMPE touch controller supportLuotao Fu
This one adds a driver for STMPE touchscreen controllers. This driver depends on the stmpexxx mfd core driver. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-07-31Input: cy8ctmg110 - capacitive touchscreen supportSamuli Konttila
Add support for the cy8ctmg110 capacitive touchscreen used on some embedded devices. (Some clean up by Alan Cox) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-14Input: Add ATMEL QT602240 touchscreen driverJoonyoung Shim
The chip's full name is AT42QT602240 or ATMXT224. This is a capacitive touchscreen supporting 10-contact multitouch and using I2C interface. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-03Input: ad7879 - split bus logic outMike Frysinger
The ad7879 driver is using the old bus method of only supporting one at a time (I2C or SPI). So refactor it like the other input drivers that support multiple busses simultaneously. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-28input: Touchscreen driver for TPS6507xTodd Fischer
Add touch screen input driver for TPS6507x family of multi-function chips. Uses the TPS6507x MFD driver. No interrupt support due to testing limitations of current hardware. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-04-13Input: add driver for hampshire serial touchscreensAdam Bennett
Adds support for Hampshire TSHARC serial touchscreens. Implements Hampshire's 4-byte communication protocol. Signed-off-by: Adam Bennett <abennett72@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-13Input: remove now deprecated corgi_ts.c touchscreen driverEric Miao
The corgi touchscreen is now deprecated in favour of the generic ads7846.c driver. The noise reduction technique used in corgi_ts.c, which is to wait till vsync before ADC sampling, is also integrated into ads7846 driver now. Provided that the original driver is not generic and is difficult to maintain, it will be removed now. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-07input: Enable touch on 88pm860xHaojian Zhuang
Enable touchscreen driver for the 88pm860x multi function core. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-15Input: add mc13783 touchscreen driverSascha Hauer
This driver provides support for the touchscreen interface integrated into the Freescale MC13783. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: add S3C24XX touchscreen driverArnaud Patard
S3C24XX touchscreen driver, originally written by Arnaud Patard and other contributors. The driver has had substantial testing as well as a number of tidying up passes done by Ben Dooks, as noted: - added kernel-doc comments to most of the routines - removed old code from pre adc framework days - updated device probe code to use platform id list matching - cleaned up debug, since printk() now has timestamp feature - ensure code uses dev_() reporting macros where necessary - remove ABS_PRESSURE reporting, tslib can be fixed - ensure timer is removed on driver exit - move to using dev_pmops for power management Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-10-26Input: add driver for Dynapro serial touchscreenTias Guns
This is a driver for Dynapro serial touchscreen, which used to be supported in Xorg. The driver needs updated inputattach utility to initialize serial port and create proper serio device before the driver will be bound to it. Signed-off-by: Tias Guns <tias@ulyssis.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: add driver for Atmel AT42QT2160 Sensor Chip Input: max7359 - use threaded IRQs Input: add driver for Maxim MAX7359 key switch controller Input: add driver for ADP5588 QWERTY I2C Keypad Input: add touchscreen driver for MELFAS MCS-5000 controller Input: add driver for OpenCores Keyboard Controller Input: dm355evm_keys - remove dm355evm_keys_hardirq Input: synaptics_i2c - switch to using __cancel_delayed_work() Input: ad7879 - add support for AD7889 Input: atkbd - rely on input core to restore state on resume Input: add generic suspend and resume for input devices Input: libps2 - additional locking for i8042 ports
2009-09-17Input: add touchscreen driver for MELFAS MCS-5000 controllerJoonyoung Shim
The MELPAS MCS-5000 is the touchscreen controller. The overview of this controller can see at the following website: http://www.melfas.com/product/product01.asp?k_r=eng_ This driver is tested on s3c6410 NCP board and supports only the i2c interface. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-17input: PCAP2 based touchscreen driverDaniel Ribeiro
Touchscreen driver for the PCAP2 multi function device used in Motorola EZX smartphones. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-11Input: add support for touchscreen on W90P910 ARM platformWan ZongShun
The touchscreen works in two modes, wait trigger mode and auto-semi mode. The device starts in wait trigger mode and waits until pressure is detected, then device sets WT_INT bit and raises an interrupt. The driver should put the device into auto-semi mode and prepare for reading first X and then Y coordinates. When coordinate data is ready the driver sets ADC_INT bit and raises interrupt again. [dtor@mail.ru: various cleanups] Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-19Input: add driver for EETI touchpanelsDaniel Mack
This patch adds a driver for EETI's I2C connected touchscreens. Signed-off-by: Daniel Mack <daniel@caiaq.de> Tested-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-18Input: add wm97xx accelerated driver for Atmel microprocessorsHans-Christian Egtvedt
This patch adds an accelerated driver for Atmel AVR32 AT32AP700X microprocessors. It uses interrupts on the channel B in the AC97 controller. Thus, offloading the work queue in the wm97xx-ts driver. The driver has been tested with Atmel AVR32 AT32AP7000 and Wolfson WM9712 codec. The driver can also be easily modified to support Atmel AT91 devices, as AT91 and AVR32 share the same AC97C module. [Fixed leak of atmel_wm97xx when probe fails. -- broonie] [dtor@mail.ru: do not report ABS_PRESSURE events when not measuring pressure] Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09Input: add AD7879 Touchscreen driverMichael Hennerich
[randy.dunlap@oracle.com: don't use bus_id] [dtor@mail.ru: locking and other fixups] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09Input: add AD7877 touchscreen driverMichael Hennerich
[dtor@mail.ru: locking and other fixups] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-08Input: add accelerated touchscreen support for Marvell ZyloniteMark Brown
This patch implements accelerated touchscreen support for the Marvell Zylonite development platform, supporting pen down interrupts and continuous mode data transfers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-15 04:08:41 +0000