summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen/usbtouchscreen.c
AgeCommit message (Collapse)Author
2012-05-04USB: input: usbtouchscreen.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henrik Rydberg <rydberg@euromail.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Viresh Kumar <viresh.kumar@st.com> CC: Armando Visconti <armando.visconti@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: usbtouchscreen.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henrik Rydberg <rydberg@euromail.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Viresh Kumar <viresh.kumar@st.com> CC: Armando Visconti <armando.visconti@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: input: usbtouchscreen.c: fix up dev_err() usageGreg Kroah-Hartman
We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henrik Rydberg <rydberg@euromail.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Viresh Kumar <viresh.kumar@st.com> CC: Armando Visconti <armando.visconti@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25USB: usbtouchscreen.c: remove err() usageGreg Kroah-Hartman
err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henrik Rydberg <rydberg@euromail.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Viresh Kumar <viresh.kumar@st.com> CC: Armando Visconti <armando.visconti@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09Merge commit 'v3.3-rc6' into nextDmitry Torokhov
2012-03-04Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037Armando Visconti
The Data Modul TP 72037 EasyTouch controller is derived from EGALAX controller and is capable of detecting dual contacts. Packets can be 5 bytes or 10 bytes long, depending whether one or two contacts are detected. Format is same as EGALAX touch controller, but with x and y coordinates inverted. Signed-off-by: Armando Visconti <armando.visconti@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits) Input: tc3589x-keypad - add missing kerneldoc Input: ucb1400-ts - switch to using dev_xxx() for diagnostic messages Input: ucb1400_ts - convert to threaded IRQ Input: ucb1400_ts - drop inline annotations Input: usb1400_ts - add __devinit/__devexit section annotations Input: ucb1400_ts - set driver owner Input: ucb1400_ts - convert to use dev_pm_ops Input: psmouse - make sure we do not use stale methods Input: evdev - do not block waiting for an event if fd is nonblock Input: evdev - if no events and non-block, return EAGAIN not 0 Input: evdev - only allow reading events if a full packet is present Input: add driver for pixcir i2c touchscreens Input: samsung-keypad - implement runtime power management support Input: tegra-kbc - report wakeup key for some platforms Input: tegra-kbc - add device tree bindings Input: add driver for AUO In-Cell touchscreens using pixcir ICs Input: mpu3050 - configure the sampling method Input: mpu3050 - ensure we enable interrupts Input: mpu3050 - add of_match table for device-tree probing Input: sentelic - document the latest hardware ... Fix up fairly trivial conflicts (device tree matching conflicting with some independent cleanups) in drivers/input/keyboard/samsung-keypad.c
2011-11-18USB: convert drivers/input/* to use module_usb_driver()Greg Kroah-Hartman
This converts the drivers in drivers/input/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Henk Vergonet <Henk.Vergonet@gmail.com> Cc: Alessandro Rubini <rubini@ipvvis.unipv.it> Cc: Henrik Rydberg <rydberg@euromail.se> Cc: "Magnus Hörlin" <magnus@alefors.se> Cc: Chris Moeller <kode54@gmail.c> Cc: Christoph Fritz <chf.fritz@googlemail.com> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Edwin van Vliet <edwin@cheatah.nl> Cc: Ping Cheng <pingc@wacom.com> Cc: Eduard Hasenleithner <eduard@hasenleithner.at> Cc: Alexander Strakh <strakh@ispras.ru> Cc: Glenn Sommer <gsommer@datanordisk.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-05Input: usbtouchscreen - add ELO IntelliTouch 2700 supportMichael Gebetsroither
Signed-off-by: Michael Gebetsroither <michael@mgeb.org> Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-22Input: usbtouchscreen - add support for LG Flatron T1710BGlenn Sommer
I've recently got my hands on a LG Flatron T1710B touchscreen. As other LG products, this seems to use the ITM panel. Signed-off-by: Glenn Sommer <gsommer@datanordisk.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15Input: usbtouchscreen - implement reset_resumeOliver Neukum
This implements reset_resume() by splitting init into allocations of private data structures and device initializations. Device initializations are repeated upon reset_resume. Signed-off-by: Oliver Neukum <oneukum@suse.de> Tested-by: Petr Štetiar <ynezz@true.cz> Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15Input: usbtouchscreen - implement runtime power managementOliver Neukum
This implement USB autosuspend while the device is opened for devices that do remote wakeup with a fallback to open/close for those devices that don't. Devices that require the host to constantly poll them are never autosuspended. Signed-off-by: Oliver Neukum <oneukum@suse.de> Tested-by: Petr Štetiar <ynezz@true.cz> Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-15Input: usbtouchscreen - implement basic suspend/resumeOliver Neukum
This implements basic support for suspend & resume. Signed-off-by: Oliver Neukum <oneukum@suse.de> Tested-by: Petr Štetiar <ynezz@true.cz> Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-28Input: usbtouchscreen - add support for ET&T TC4UM touchscreen controllerPetr Štetiar
This patch adds support for the ET&T TC4UM 4-wire USB touchscreen controller and tries to reuse the bits for TC5UH controller in kernel already. Data interface is same. Tested-by: Roger Pueyo Centelles <rogerpueyo@rogerpueyo.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-08Input: usbtouchscreen - reduce number fo be16_to_cpu conversionsDmitry Torokhov
Let's perform be16_to_cpu() conversions once for each received packet, and then use cached values. Makes code a little bit easier to follow. Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: usbtouchscreen - support bigger iNexio touchscreens Input: ads7846 - return error on regulator_get() failure Input: twl4030-vibra - correct the power down sequence Input: enable onkey driver of max8925 Input: use ABS_CNT rather than (ABS_MAX + 1)
2010-05-26Input: usbtouchscreen - support bigger iNexio touchscreensOndrej Zary
Bigger Nexio touchscreens not only send more data but also the header values are modified somewhat. Fix the header (it's a guesswork but it works at least on one 46" touchscreen with 2.00SMS firmware) and also increase rept_size. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (229 commits) USB: remove unused usb_buffer_alloc and usb_buffer_free macros usb: musb: update gfp/slab.h includes USB: ftdi_sio: fix legacy SIO-device header USB: kl5usb105: reimplement using generic framework USB: kl5usb105: minor clean ups USB: kl5usb105: fix memory leak USB: io_ti: use kfifo to implement write buffering USB: io_ti: remove unsused private counter USB: ti_usb: use kfifo to implement write buffering USB: ir-usb: fix incorrect write-buffer length USB: aircable: fix incorrect write-buffer length USB: safe_serial: straighten out read processing USB: safe_serial: reimplement read using generic framework USB: safe_serial: reimplement write using generic framework usb-storage: always print quirks USB: usb-storage: trivial debug improvements USB: oti6858: use port write fifo USB: oti6858: use kfifo to implement write buffering USB: cypress_m8: use kfifo to implement write buffering USB: cypress_m8: remove unused drain define ... Fix up conflicts (due to usb_buffer_alloc/free renaming) in drivers/input/tablet/acecad.c drivers/input/tablet/kbtab.c drivers/input/tablet/wacom_sys.c drivers/media/video/gspca/gspca.c sound/usb/usbaudio.c
2010-05-20USB: rename usb_buffer_alloc() and usb_buffer_free() usersDaniel Mack
For more clearance what the functions actually do, usb_buffer_alloc() is renamed to usb_alloc_coherent() usb_buffer_free() is renamed to usb_free_coherent() They should only be used in code which really needs DMA coherency. All call sites have been changed accordingly, except for staging drivers. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Pedro Ribeiro <pedrib@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-19Input: usbtouchscreen - switch to using kmemdup()Julia Lawall
Use kmemdup when some other buffer is immediately copied into the allocated region. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-28Merge branch 'next' into for-linusDmitry Torokhov
2010-02-21Input: usbtouchscreen - extend coordinate range for Generaltouch devicesRoy Yin
Generaltouch protocol allows for coordinates in [0, 0xffff] range and there are devices reporting coordinates as high as 0x7fff so let's update the driver to reflect that. Signed-off-by: Roy Yin <yhch@generaltouch.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: usbtouchscreen - fix leaks and check return value of usb_submit_urb()Ondrej Zary
Fix urb leak in error path of initialization and make sure we handle errors from initial usb_submit_urb(). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: usbtouchscreen - add NEXIO (or iNexio) supportOndrej Zary
Add support for NEXIO (or iNexio) USB touchscreens to usbtouchscreen driver. Tested with NEX170MRT 17" LCD monitor with integrated touchscreen (with xserver-xorg-input-evtouch 0.8.8-1): T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 54 Spd=12  MxCh= 0 D:  Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1 P:  Vendor=1870 ProdID=0001 Rev= 1.00 S:  Manufacturer=iNexio S:  Product=iNexio USB C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=00 Driver=(none) E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=255ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none) E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms No datasheet is available, this was written by capturing some data with SniffUSB in Windows: http://www.rainbow-software.org/linux_files/nexio/ Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: usbtouchscreen - find input endpoint automaticallyOndrej Zary
Find input enpoint automatically instead of assuming that the first one is OK. This is needed for devices with multiple endpoints such as iNexio where the first endpoint might be output. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-04Input: usbtouchscreen - convert from usb_device to usb_interfaceOndrej Zary
Convert usbtouchscreen from storing usb_device to usb_interface. This is needed for multi-interface touchscreen devices such as iNexio. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-11Input: make USB device ids constantMárton Németh
The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it makes sense to mark the initialization data also constant. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-29Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controllerPetr Štetiar
This patch adds support for the ET&T TC5UH 5-wire USB touchscreen controller. More info at http://www.etandt.com.tw/board_solution.html Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: usbtouchscreen - add support for Zytronic capacitive touchscreenDaniel Silverstone
Zytronic USB-attached capacitive touchscreen support within the generic USB touchscreen driver. Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk> Signed-off-by: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-23Input: usbtouchscreen - remove unneeded usb_kill_urbOliver Neukum
usb_kill_urb() in disconnect is not needed as unregistering will cause close() to be called. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-27Input: usbtouchscreen - add support for e2i touchscreen controllerFlorian Echtler
This patch adds support for the e2i touchscreen controller used in the Mimo 740 (and probably in other e2i touchscreen products). Tested on Mimo 740. Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-07Input: usbtouchscreen - support for JASTEC/DigiTech DTR-02U USB touch ↵Jim Persson
controllers Add support for the JASTEC/DigiTech DTR-02U USB touch screen controllers. Signed-off-by: Jim Persson <jim-linux@nurd.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28Input: usbtouchscreen - fix eGalax HID ignoringDaniel Ritz
Commit ec42d4481e36cbdb5b2801f957e678211a9e5ae2 broke usbtouchscreen for some eGalax/EETI devices that claim to be HID, but are not. Devices confirmed to be real HID have the class set to HID and the protocol set to 'mouse'. Some have HID class but protocol set to 'none'. Those are not HID and should be driven by usbtouchscreen. Fix the device ignoring macro by adding match for the protocol too. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-01-10Input: usbtouchscreen - allow reporting calibrated dataDan Streetman
This patch adds a module parameter to report either the raw coordinate data or the hardware-calibrated coordinate data for MicroTouch/3M touchscreens. The default is set to the raw coordinates for backwards compatibilty. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-11-19Input: usbtouchscreen - fix TSC-10 DM USB controllers without EEPROMNuno Lucas
The usbtouchscreen module implements a driver for the TSC-10 DM USB touchscreen controllers, but assumes a 2-byte response for the CMD_RESET and CMD_RATE commands, when they can be only a single byte when no EEPROM is connected. The driver worked with an earlier controller revision, but new revisions of the controller fail. It seems the problem is that the early controller had the SEL4/EEPROM-CS pin high, but the new controller has it down, making the response different. Without the fix, the controller would answer the single byte 0x06 (ACK), making the init fail with -ENODEV because buf[1] is 0xFF (as initialized before). As the single byte is the only thing we need to check it was ok, there is no need to verify the second byte. The [0x15 0x01] case is the NAK [0x15] response for when there is no data in the EEPROM [bit-0 of second byte set], so I let that be, as I don't have any controller with an EEPROM. With this patch, both the earlier and latest controller work the same. Note: This was previously submited as BUG #11961 [1] on the bugzilla tracker, but rebased to version 2.6.27.4 and with unnecessary comments and printk's removed. [1] http://bugzilla.kernel.org/show_bug.cgi?id=11961 Signed-off-by: Nuno Lucas <ntlucas@gmail.com> Acked-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-03Input: usbtouchscreen - ignore eGalax screens supporting HID protocolDaniel Ritz
The newer versions of the eGalax/EETI screen implement the HID protocol. The device IDs are still the same, but the USB interface descriptor shows the device being of HID class. Change usbtouchscreen to ignore the HID models as they are handled properly by usbhid. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-16Input: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-04Input: usbtouchscreen - don't use DMA on stackOliver Neukum
DMA on the stack is not allowed. The buffer must be kmalloced. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-17Input: usbtouchscreen - fix buffer overflow, make more egalax workDaniel Ritz
Fix a buffer overflow in mutli-packet handling code. The overflow can only happen with eGalax devices and is even there very unlikely (only non-report packet are affected any only when truncated after the first byte). Also changes the mutli-packet handling code not to drop unknown packets, but rather just drop one byte. This allows synchronizing on report packets in the data stream. It's required for some egalax devices to work at all. Also remove the pointless 'flags' member of the device struct and set the version number to 0.6, plus some minor cleanups. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: appletouch - apply idle reset logic to all touchpads Input: usbtouchscreen - add support for GoTop tablet devices Input: bf54x-keys - return real error when request_irq() fails Input: i8042 - export i8042_command()
2007-10-22Input: usbtouchscreen - add support for GoTop tablet devicesJerrold Jones
Add support for GoTop Super_Q2/GogoPen/PenPower tablets to usbtouchscreen. Protocol discovery was done by Yick Yan Lam. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-19get rid of input BIT* duplicate definesJiri Slaby
get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov
Conflicts: drivers/macintosh/adbhid.c
2007-10-12Input: usbtouchscreen - add support for GeneralTouch devicesIlya Frolov
Signed-off-by: Ilya Frolov <zeylie@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-10Input: usbtouchscreen - support DMC devices with empty EEPROMDaniel Ritz
A reply of 0x0600 means all OK, 0x1501 means OK, but EEPROM empty. The behavior with an empty EEPROM is the same as without one at all so do not fail loading the driver. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-06Input: usbtouchscreen - correctly set 'phys'Vladimir Shebordaev
This patch fixes a nasty typo in usbtouchscreen driver. The typo is inherited from the original mtouchusb. It used to make the input subsytem to incorrectly report the physical device ids to userspace that in turn is very confusing for, e.g. XInput hotplug facilities in setups with multiple identical touchscreens. Signed-off-by: Vladimir Shebordaev <vshebordaev@mail.ru> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-04Input: usbtouchscreen - add support for IdealTEK URTC1000Ondrej Zary
This patch adds support for IdealTEK URTC1000 touchscreen controllers. Documentation can be downloaded at: http://projects.tbmn.org/cgi-bin/trac.cgi/wiki/urtc-1000 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: usbtouchscreen - add support for IRTOUCHSYSTEMS touchscreensOndrej Zary
This patch adds support for IRTOUCHSYSTEMS (or UNITOP) infrared touchscreens. The touchscreen sends data in 8-byte packets. BYTE 0 - unknown meaning, seen only one value: 0x54 BYTE 1 - unknown meaning, 3 lowest bits indicate touch state values seen: 0x81, 0x82 or 0x83 bit 0 = set if the screen is touched and was not touched before (touch bit 1 = set if the screen is touched and was touched (dragging) bit 2 = set if the touch was ended (release) BYTES 2 and 3 - X position, high-order-byte first, range = 0 to 0x0FFF BYTES 4 and 5 - Y position, high-order-byte first, range = 0 to 0x0FFF BYTE 6 - unknown meaning, seen only one value: 0xFF BYTE 7 - unknown meaning, seen only one value: 0x00 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Input: usbtouchscreen - fix fallout caused by move from drivers/usbOndrej Zary
During the move from drivers/usb/input into drivers/input/touchscreen Kconfig variables were shuffled a bit to use a new namespace (CONFIG_TOUCHSCREEN) while usbtouchscreen was still using old ones. Also noticed by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-09 18:34:38 +0000