summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)Author
2014-07-23Input: atmel_mxt_ts - handle APP_CRC_FAIL on startupNick Dyer
If the bootloader on the touchscreen controller fails to initialise the firmware image, it stays in bootloader mode and reports a failure. It is possible to reflash a working firmware image from this state. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - calculate and check CRC in config fileNick Dyer
By validating the checksum, we can identify if the configuration is corrupt. In addition, this patch writes the configuration in a short series of block writes rather than as many individual values. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - download device config using firmware loaderNick Dyer
The existing implementation which encodes the configuration as a binary blob in platform data is unsatisfactory since it requires a kernel recompile for the configuration to be changed, and it doesn't deal well with firmware changes that move values around on the chip. Atmel define an ASCII format for the configuration which can be exported from their tools. This patch implements a parser for that format which loads the configuration via the firmware loader and sends it to the MXT chip. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - implement device tree supportStephen Warren
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - set pointer emulation on touchpadsBenson Leung
Touchpads are pointers, so make sure to pass the correct values to input_mt_report_pointer_emulation(). Without this, tap-to-click doesn't work. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - move input device init into separate functionNick Dyer
It is useful to initialise the input device later: - Screen parameters may not be not known yet, for instance if waiting for firmware loader to return. - Device may be in bootloader mode on probe (but could still be recovered by firmware download). In addition, later devices have a different touchscreen object (T100) which requires handling differently. This also reduces the complexity of the probe function. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - initialise IRQ before probingNick Dyer
The maXTouch chips use the CHG line to generate status events in bootloader mode, and during configuration download, before there is enough information to configure the input device. Therefore set up the interrupt handler earlier. However, this introduces states where parts of the interrupt processing must not run. Use data->object_table as a way to tell whether the chip information is valid, and data->input_dev as a way to tell whether it is valid to generate input report. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-21Input: zforce - add regulator handlingHeiko Stuebner
It's possible that the controller has an individually switchable power supply. Therefore add support to control a supplying regulator. As this is not always the case, the regulator is requested as optional. Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-20Input: s3c2410_ts - fix preparing/enabling clockVasily Khoruzhick
Use clk_prepare_enable/clk_disable_unprepare to make the driver work properly with common clock framework. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-18Input: edt-ft5x06 - remove unnecessary null testFabian Frederick
Fix checkpatch warning: "WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required" Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-06-15Input: ti_am335x_tsc - warn about incorrect spellingFelipe Balbi
In the hopes that people run new kernels on their devices, let's add a warning message asking users to have their DTS file fixed. The goal is that by Linux 4.0 we will be able to remove support for the bogus version of our touchscreen's DTS. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-06-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A big update to the Atmel touchscreen driver, devm support for polled input devices, several drivers have been converted to using managed resources, and assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits) Input: synaptics - fix resolution for manually provided min/max Input: atmel_mxt_ts - fix invalid return from mxt_get_bootloader_version Input: max8997_haptic - add error handling for regulator and pwm Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set Input: elantech - deal with clickpads reporting right button events Input: edt-ft5x06 - fix an i2c write for M09 support Input: omap-keypad - remove platform data support ARM: OMAP2+: remove unused omap4-keypad file and code Input: ab8500-ponkey - switch to using managed resources Input: max8925_onkey - switch to using managed resources Input: 88pm860x-ts - switch to using managed resources Input: 88pm860x_onkey - switch to using managed resources Input: intel-mid-touch - switch to using managed resources Input: wacom - process outbound for newer Cintiqs Input: wacom - set stylus_in_proximity when pen is in range DTS: ARM: OMAP3-N900: Add tsc2005 support Input: tsc2005 - add DT support Input: add common DT binding for touchscreens Input: jornada680_kbd - switch top using managed resources Input: adp5520-keys - switch to using managed resources ...
2014-06-07Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 3.16.
2014-06-07Input: atmel_mxt_ts - fix invalid return from mxt_get_bootloader_versionNick Dyer
The patch e57a66aa8534: "Input: atmel_mxt_ts - read and report bootloader version" from May 18, 2014, leads to the following static checker warning: drivers/input/touchscreen/atmel_mxt_ts.c:437 mxt_get_bootloader_version() warn: signedness bug returning '(-5)' drivers/input/touchscreen/atmel_mxt_ts.c 429 static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val) 430 { 431 struct device *dev = &data->client->dev; 432 u8 buf[3]; 433 434 if (val & MXT_BOOT_EXTENDED_ID) { 435 if (mxt_bootloader_read(data, &buf[0], 3) != 0) { 436 dev_err(dev, "%s: i2c failure\n", __func__); 437 return -EIO; ^^^^ This gets truncated into a number from 0-255 and anyway the caller doesn't check for errors. (reported by Dan Carpenter) Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-06-07Input: edt-ft5x06 - fix an i2c write for M09 supportRobert Woerle
The driver sends 3 bytes instead of 2 when accessing a register on the M09 firmware, so writing to gain seems to overflow into the offset register. Signed-off-by: Robert Woerle <robert@linuxdevelopment.de> Acked-By: Simon Budig <simon.budig@kernelconcepts.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-06-02Merge tag 'soc-for-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next Pull part one of ARM SoC updates from Olof Johansson: "A quite large set of SoC updates this cycle. In no particular order: - Multi-cluster power management for Samsung Exynos, adding support for big.LITTLE CPU switching on EXYNOS5 - SMP support for Marvell Armada 375 and 38x - SMP rework on Allwinner A31 - Xilinx Zynq support for SOC_BUS, big endian - Marvell orion5x platform cleanup, modernizing the implementation and moving to DT. - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so that their platform can be enabled in the same kernel binary as most of the other v7 platforms in the tree. \o/ The work isn't quite complete, there's some driver fixes still needed, but the basics now work. New SoC support added: - Freescale i.MX6SX - LSI Axxia AXM55xx SoCs - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800 - STi STIH407 plus a large set of various smaller updates for different platforms. I'm probably missing some important one here" * tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits) ARM: exynos: don't run exynos4 l2x0 setup on other platforms ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug ARM: EXYNOS: mcpm rename the power_down_finish ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC clk: exynos5410: register clocks using common clock framework ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084 ARM: sunxi: allow building without reset controller Documentation: devicetree: arm: sort enable-method entries ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks ARM: dts: axxia: Add reset controller power: reset: Add Axxia system reset driver ARM: axxia: Adding defconfig for AXM55xx ...
2014-05-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "A couple of driver/build fixups and also redone quirk for Synaptics touchpads on Lenovo boxes (now using PNP IDs instead of DMI data to limit number of quirks)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - change min/max quirk table to pnp-id matching Input: synaptics - add a matches_pnp_id helper function Input: synaptics - T540p - unify with other LEN0034 models Input: synaptics - add min/max quirk for the ThinkPad W540 Input: ambakmi - request a shared interrupt for AMBA KMI devices Input: pxa27x-keypad - fix generating scancode Input: atmel-wm97xx - only build for AVR32 Input: fix ps2/serio module dependency
2014-05-29Input: 88pm860x-ts - switch to using managed resourcesHimangi Saraogi
Let's switch the driver to use managed resources, this will simplify error handling and driver unbinding logic. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-29Input: intel-mid-touch - switch to using managed resourcesHimangi Saraogi
Let's switch the driver to use managed resources, this will simplify error handling and driver unbinding logic. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-29Input: tsc2005 - add DT supportSebastian Reichel
This adds DT support to the tsc2005 touchscreen driver. It also adds regulator support to the driver if booted via DT. Reviewed-by: Pavel Machek <pavel@ucw.cz> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-29Input: add common DT binding for touchscreensSebastian Reichel
Add common DT binding documentation for touchscreen devices and implement input_parse_touchscreen_of_params, which parses the common properties and configures the input device accordingly. The method currently does not interpret the axis inversion properties, since there is no matching flag in the generic linux input device. Reviewed-by: Pavel Machek <pavel@ucw.cz> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-28Input: da9034-ts - switch to using managed resourcesHimangi Saraogi
Let's switch the driver to use managed resources, this will simplify error handling and allows us to get rid of da9034_touch_remove(). Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-28Input: mcs5000_ts - switch to using managed resourcesBeomho Seo
Let's switch the driver to use managed resources, this will simplify error handling and driver unbinding logic. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-28Input: mcs5000_ts - fix incorrect input device nameBeomho Seo
This patch fix a typo error in MELFAS MCS-5000 controller driver. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-28Input: mms114 - fix incorrect input device nameBeomho Seo
This patch fix a typo error in mms114 touchscreen driver. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: atmel_mxt_ts - handle multiple input reports in one messageNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: atmel_mxt_ts - rename touchscreen defines to include T9Nick Dyer
This avoids confusion with the newer T100 touchscreen object. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: atmel_mxt_ts - rename pressure to amplitude to match specNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: atmel_mxt_ts - read screen config from chipNick Dyer
By reading the touchscreen configuration from the settings that the maXTouch chip is actually using, we can remove some platform data. The matrix size is not used for anything, and results in some rather confusing code to re-read it because it may change when configuration is downloaded, so don't print it out. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - add check for incorrect firmware file formatNick Dyer
Atmel supplies firmware files in ASCII HEX format (.enc) which must be converted before they can be loaded by kernel driver. Try to detect the error and print a friendly error message rather than feeding junk to the bootloader. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - improve bootloader progress outputNick Dyer
By implementing a frame counter, print out fewer debug messages (the firmware may contain hundreds of frames). Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - implement bootloader frame retriesNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - read and report bootloader versionNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - add additional bootloader addressesNick Dyer
Move bootloaders reads/writes into separate functions. Instead of switching client->addr, define new field bootloader_addr in mxt_data. Implement lookup calculation for bootloader addresses. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - implement CRC check for configuration dataNick Dyer
The configuration is stored in NVRAM on the maXTouch chip. When the device is reset it reports a CRC of the stored configuration values. Therefore it isn't necessary to send the configuration on each probe - we can check the CRC matches and avoid a timeconsuming backup/reset cycle. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - improve error reporting and debugNick Dyer
- Add error messages for probe errors - Report type in invalid object type - Tweak some other debug output messages Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - make wait-after-reset period compatible with all chipsIiro Valkonen
The delay before the chip can be accessed after reset varies between different chips in maXTouch family. Waiting for an interrupt and a T6 status message with the RESET bit set is a better behaviour. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - wait for CHG after bootloader resetsBenson Leung
Rather than msleep for MXT_RESET_TIME and MXT_FWRESET_TIME during the transition to bootloader mode and the transition back from app, wait for the CHG assert to indicate that the transition is done. This change replaces the msleep with a wait for completion that the mxt_interrupt handler signals. Also add CHG poll after last firmware frame - some bootloader versions will assert the interrupt line after the final frame, in testing this meant that the driver attempts to read the info block too early whilst the chip is still resetting. This improves firmware update time as we no longer wait longer than necessary for each reset. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloaderBenson Leung
The driver should not immediately read bootloader status when in Application Update Mode. The CHG line will assert when the device has made a state transition and is ready to report a new status via i2c. This change adds a wait for completion in mxt_check_bootloader, and changes the mxt_interrupt handler to signal the completion. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - select FW_LOADER for firmware codeNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - define helper functions for size and instancesDaniel Kurtz
These two object table entry fields are reported 1 less than their value. When used, however, we always want the actual size and instances. To keep the object size and instances 1-byte fields, and thus preserve the object-table struct's 6-byte packed alignment, add some convenient accessor functions that do the +1 every time these fields are accessed. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - return IRQ_NONE when interrupt handler failsNick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - improve T19 GPIO keys handlingNick Dyer
* The mapping of the GPIO numbers into the T19 status byte varies between different maXTouch chips. Some have up to 7 GPIOs. Allowing a keycode array of up to 8 items is simpler and more generic. So replace #define with configurable number of keys which also allows the removal of is_tp. * Rename platform data parameters to include "t19" to prevent confusion with T15 key array. * Probe aborts early on when pdata is NULL, so no need to check. * Move "int i" to beginning of function (mixed declarations and code) * Use API calls rather than __set_bit() * Remove unused dev variable. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - remove unnecessary platform dataNick Dyer
It is not necessary to download these values to the maXTouch chip on every probe, since they are stored in NVRAM. It makes life difficult when tuning the device to keep them in sync with the config array/file, and requires a new kernel build for minor tweaks. These parameters only represent a tiny subset of the available configuration options, tracking all of these options in platform data would be a endless task. In addition, different versions of maXTouch chips may have these values in different places or may not even have them at all. Having these values also makes life more complex for device tree and other platforms where having to define a static configuration isn't helpful. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: pixcir_i2c_ts - implement wakeup from suspendRoger Quadros
Improve the suspend and resume handlers to allow the device to wakeup the system from suspend. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: pixcir_i2c_ts - get rid of pdata->attb_read_val()Roger Quadros
Get rid of the attb_read_val() platform hook. Instead, read the ATTB gpio directly from the driver. Fail if valid ATTB gpio is not provided by patform data. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: pixcir_i2c_ts - initialize interrupt mode and power modeRoger Quadros
Introduce helper functions to configure power and interrupt registers. Default to IDLE mode on probe as device supports auto wakeup to ACVIE mode on detecting finger touch. Configure interrupt mode and polarity on start up. Power down on device closure or module removal. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: pixcir_i2c_ts - use devres managed resource allocationsRoger Quadros
Use devm_() and friends for allocating memory, input device and IRQ. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-14Merge tag 'v3.15-rc5' into nextDmitry Torokhov
Merge with Linux 3.15-rc5 to sync up Wacom and other changes.
2014-05-14Input: sun4i-ts - add support for temperature sensorHans de Goede
The sun4i resisitive touchscreen controller also comes with a built-in temperature sensor. This commit adds support for it. This commit also introduces a new "ts-attached" device-tree property, when this is not set, the input part of the driver won't register. This way the internal temperature sensor can be used to measure the SoC temperature independent of there actually being a touchscreen attached to the controller. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-15 16:04:12 +0000