summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2016-02-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just small driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: colibri-vf50-ts - add missing #include <linux/of.h> Input: adp5589 - fix row 5 handling for adp5589 Input: edt-ft5x06 - fix setting gain, offset, and threshold via device tree Input: vmmouse - fix absolute device registration Input: serio - drop warnings in case of EPROBE_DEFER from serio_find_driver() Input: cap11xx - add missing of_node_put Input: sirfsoc-onkey - allow modular build Input: xpad - remove unused function
2016-02-09Input: colibri-vf50-ts - add missing #include <linux/of.h>Geert Uytterhoeven
drivers/input/touchscreen/colibri-vf50-ts.c: In function ‘vf50_ts_probe’: drivers/input/touchscreen/colibri-vf50-ts.c:302: error: implicit declaration of function ‘of_property_read_u32’ Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-02-09Input: adp5589 - fix row 5 handling for adp5589Lars-Peter Clausen
The adp5589 has row 5, don't skip it when creating the GPIO mapping. Otherwise the pin gets reserved as used and it is not possible to use it as a GPIO. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-02-09Input: edt-ft5x06 - fix setting gain, offset, and threshold via device treePhilipp Zabel
A recent patch broke parsing the gain, offset, and threshold parameters from device tree. Instead of setting the cached values and writing them to the correct registers during probe, it would write the values from DT into the register address variables and never write them to the chip during normal operation. Fixes: 2e23b7a96372 ("Input: edt-ft5x06 - use generic properties API") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: vmmouse - fix absolute device registrationDmitry Torokhov
We should set device's capabilities first, and then register it, otherwise various handlers already present in the kernel will not be able to connect to the device. Reported-by: Lauri Kasanen <cand@gmx.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: serio - drop warnings in case of EPROBE_DEFER from serio_find_driver()Grygorii Strashko
Now serio_find_driver() will print warnings in case device_attach() returns -EPROBE_DEFER. Those warnings are obsolete, in genral, because: - DD core can report the same if required - since commit 013c074f8642 ("PM / sleep: prohibit devices probing during suspend/hibernation") the devices probing is prohibited during System suspend and deferred device will be carefully reprobed once Resume is finished. Hence, drop warnings in case of EPROBE_DEFER from serio_find_driver(). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: cap11xx - add missing of_node_putAmitoj Kaur Chawla
for_each_child_of_node performs an of_node_get on each iteration, so to break out of the loop an of_node_put is required. Found using Coccinelle. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: sirfsoc-onkey - allow modular buildArnd Bergmann
CONFIG_INPUT may itself be a loadable module, but the sirf power key driver is listed as 'bool', which makes it possible to select a broken configuration with the driver built-in but the subsystem not loaded. In this configuration, we get a link error: drivers/input/built-in.o: In function `sirfsoc_pwrc_isr': drivers/input/misc/sirfsoc-onkey.c:63: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_isr': include/linux/input.h:414: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_probe': drivers/input/misc/sirfsoc-onkey.c:132: undefined reference to `devm_input_allocate_device' drivers/input/misc/sirfsoc-onkey.c:139: undefined reference to `input_set_capability' drivers/input/misc/sirfsoc-onkey.c:161: undefined reference to `input_register_device' drivers/input/built-in.o: In function `sirfsoc_pwrc_report_event': drivers/input/misc/sirfsoc-onkey.c:48: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_report_event': include/linux/input.h:414: undefined reference to `input_event' drivers/input/built-in.o:(.debug_addr+0x24): undefined reference to `input_event' drivers/input/built-in.o:(.debug_addr+0xbc): undefined reference to `devm_input_allocate_device' drivers/input/built-in.o:(.debug_addr+0x104): undefined reference to `input_set_capability' drivers/input/built-in.o:(.debug_addr+0x128): undefined reference to `input_register_device' This marks the driver as 'tristate' so it becomes possible to have it in a loadable module, mainly to help with randconfig builds. We also have to add a missing semicolon here, which ended up not being needed in built-in mode because the following MODULE_DEVICE_TABLE is an empty macro followed by another semicolon then. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-27Input: xpad - remove unused functionArnd Bergmann
There are two definitions of xpad_identify_controller(), one is used when CONFIG_JOYSTICK_XPAD_LEDS is set, but the other one is empty and never used, and we get a gcc warning about it: drivers/input/joystick/xpad.c:1210:13: warning: 'xpad_identify_controller' defined but not used [-Wunused-function] This removes the second definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cae705baa40b ("Input: xpad - re-send LED command on present event") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "The second round of updates for the input subsystem, mainly changes to xpad driver to better hanlde Xbox One controllers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio-keys - allow disabling individual buttons in DT Input: gpio-keys - allow setting input device name in DT Input: xpad - correct xbox one pad device name Input: atmel_mxt_ts - improve touchscreen size/orientation handling Input: xpad - use LED API when identifying wireless controllers Input: xpad - workaround dead irq_out after suspend/ resume Input: xpad - update Xbox One Force Feedback Support Input: xpad - correctly handle concurrent LED and FF requests Input: xpad - handle "present" and "gone" correctly Input: xpad - remove spurious events of wireless xpad 360 controller
2016-01-21Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 4.5 merge window.
2016-01-20Merge tag 'armsoc-multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
2016-01-17Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
2016-01-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - new driver for eGalaxTouch serial touchscreen - new driver for TS-4800 touchscreen - an update for Goodix touchscreen driver - PS/2 mouse module was reworked to limit number of protocols we try on pass-through ports to speed up their detection time - wacom_w8001 touchscreen driver now reports pen and touch via separate instances of input devices - other driver changes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits) Input: elantech - mark protocols v2 and v3 as semi-mt Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE Input: gpio-keys - fix check for disabling unsupported keys Input: omap-keypad - remove dead check Input: ti_am335x_tsc - fix HWPEN interrupt handling Input: omap-keypad - set tasklet data earlier Input: rohm_bu21023 - fix handling of retrying firmware update Input: ALPS - report v3 pinnacle trackstick device only if is present Input: ALPS - detect trackstick presence for v7 protocol Input: pcap_ts - use to_delayed_work Input: bma150 - constify bma150_cfg structure Input: i8042 - add Fujitsu Lifebook U745 to the nomux list Input: egalax_ts_serial - fix potential NULL dereference on error Input: uinput - sanity check on ff_effects_max and EV_FF Input: uinput - rework ABS validation Input: uinput - add new UINPUT_DEV_SETUP and UI_ABS_SETUP ioctl Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen" Input: goodix - add axis swapping and axis inversion support Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_send Input: goodix - add power management support ...
2016-01-13Merge tag 'char-misc-4.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here's the big set of char/misc patches for 4.5-rc1. Nothing major, lots of different driver subsystem updates, full details in the shortlog. All of these have been in linux-next for a while" * tag 'char-misc-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (71 commits) mei: fix fasync return value on error parport: avoid assignment in if parport: remove unneeded space parport: change style of NULL comparison parport: remove unnecessary out of memory message parport: remove braces parport: quoted strings should not be split parport: code indent should use tabs parport: fix coding style parport: EXPORT_SYMBOL should follow function parport: remove trailing white space parport: fix a trivial typo coresight: Fix a typo in Kconfig coresight: checking for NULL string in coresight_name_match() Drivers: hv: vmbus: Treat Fibre Channel devices as performance critical Drivers: hv: utils: fix hvt_op_poll() return value on transport destroy Drivers: hv: vmbus: fix the building warning with hyperv-keyboard extcon: add Maxim MAX3355 driver Drivers: hv: ring_buffer: eliminate hv_ringbuffer_peek() Drivers: hv: remove code duplication between vmbus_recvpacket()/vmbus_recvpacket_raw() ...
2016-01-13Input: gpio-keys - allow disabling individual buttons in DTLaxman Dewangan
Add support to disable buttons from DT via status property if given button is not supported on given platforms. This will help re-using existing dtsi files across multiple platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-13Input: gpio-keys - allow setting input device name in DTLaxman Dewangan
Allow specifying name if input device via device tree property. This helps userspace code to get name and perform proper event to key mapping in some cases (for example, on Android). Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-12Merge branch 'xpad' into nextDmitry Torokhov
Bring in update to xpad driver improves support of Xbox One and wireless controllers and fixes handling of concurrent requests to force feedback and LEDs.
2016-01-12Input: xpad - correct xbox one pad device namePavel Rojtberg
Apparently the Covert Forces ID is not Covert Forces pad exclusive, but rather denotes a new firmware version that can be found on all new controllers and can be also updated on old hardware using Windows 10. see: https://github.com/paroj/xpad/issues/19 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-11Input: atmel_mxt_ts - improve touchscreen size/orientation handlingNick Dyer
Both T100 and T9 handle range and orientation in a similar fashion. Reduce duplication between the two implementations. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-11Merge branch 'next' into for-linusDmitry Torokhov
Prepare first round of input updates for 4.5 merge window.
2016-01-11Input: elantech - mark protocols v2 and v3 as semi-mtBenjamin Tissoires
When using a protocol v2 or v3 hardware, elantech uses the function elantech_report_semi_mt_data() to report data. This devices are rather creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid touch is reported. Anyway, userspace (libinput) is now confused by these (0,0) touches, and detect them as palm, and rejects them. Commit 3c0213d17a09 ("Input: elantech - fix semi-mt protocol for v3 HW") was sufficient enough for xf86-input-synaptics and libinput before it has palm rejection. Now we need to actually tell libinput that this device is a semi-mt one and it should not rely on the actual values of the 2 touches. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-11Merge branch 'patchwork' into v4l_for_linusMauro Carvalho Chehab
* patchwork: (204 commits) [media] rc: sunxi-cir: Initialize the spinlock properly [media] rtl2832: do not filter out slave TS null packets [media] rtl2832: print reg number on error case [media] rtl28xxu: return demod reg page from driver cache [media] coda: enable MPEG-2 ES decoding [media] coda: don't start streaming without queued buffers [media] coda: hook up vidioc_prepare_buf [media] coda: relax coda_jpeg_check_buffer for trailing bytes [media] coda: make to_coda_video_device static [media] s5p-mfc: remove volatile attribute from MFC register addresses [media] s5p-mfc: merge together s5p_mfc_hw_call and s5p_mfc_hw_call_void [media] s5p-mfc: use spinlock to protect MFC context [media] s5p-mfc: remove unnecessary callbacks [media] s5p-mfc: make queue cleanup code common [media] s5p-mfc: use one implementation of s5p_mfc_get_new_ctx [media] s5p-mfc: constify s5p_mfc_codec_ops structures [media] au8522: Avoid memory leak for device config data [media] ir-lirc-codec.c: don't leak lirc->drv-rbuf [media] uvcvideo: small cleanup in uvc_video_clock_update() [media] uvcvideo: Fix reading the current exposure value of UVC ...
2016-01-11Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPEPeter Hutterer
As of e0361b70175 ("Input: wacom_w8001 - split the touch and pen devices into two devices") the touch events aren't multiplexed over the same device anymore, the use of ABS_MT_TOOL_TYPE is superfluous. And even before then it only ever sent MT_TOOL_TYPE_FINGER anyway. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-10Input: gpio-keys - fix check for disabling unsupported keysDmitry Torokhov
Commit 4ea14a53d8f881034fa9e186653821c4e3d9a8fb ("Input: gpio-keys - report error when disabling unsupported key") tried let user know that they attempted to disable an unsupported key, unfortunately the check is wrong as it believes that all codes are invalid. Fix it by ensuring that keys that we try to disable are subset of keys (or switches) that device reports. Fixes: 4ea14a53d8f8 ("Input: gpio-keys - report error when disabling unsupported key") Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-07Input: omap-keypad - remove dead checkDmitry Torokhov
Commit da1f026b532ce944d74461497dc6d8c16456466e ("Keyboard: omap-keypad: use matrix_keypad.h") switched the driver to use matrix keypad infrastructure, which made array of keycodes to be unsigned short, and caused the test for negativity never trigger. This leads to the following static checker warning: drivers/input/keyboard/omap-keypad.c:158 omap_kp_tasklet() warn: 'keycodes[]' is never negative. Given that we did not care about this check for a few years already let's simply remove it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-07Input: ti_am335x_tsc - fix HWPEN interrupt handlingDave Gerlach
Remove write to REG_IRQCLR and REG_IRQWAKEUP in interrupt handler for IRQENB_HW_PEN as the resume handler should and does clear REG_IRQWAKEUP. IRQENB_HW_PEN bit is set in irqclr so that all interrupts get cleared later so let IRQENB_HW_PEN be cleared by that. Without this patch wakeup events from TSC_ADC do not work because pending interrupts in TSC_ADC were causing HW_PEN interrupt, needed for wake from suspend modes, to get disabled immediately by IRQ handler after being enabled and preventing wake from happening. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-07Input: omap-keypad - set tasklet data earlierDan Carpenter
It feels like we should set the tasklet data before enabling it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-07Input: rohm_bu21023 - fix handling of retrying firmware updateDmitry Torokhov
Because of the wrong condition we'd never retry firmware update. Acked-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-06Merge branch 'goodix' into nextDmitry Torokhov
Merge several improvements to Goodix touchscreen driver: - power management support - configuration upload - axis swapping and inversion
2016-01-06Input: ALPS - report v3 pinnacle trackstick device only if is presentPali Rohár
This patch moves v3 pinnacle code for trackstick detection from alps_hw_init_v3() to alps_set_protocol() so ALPS_DUALPOINT flag can be cleared before registering trackstick input device in kernel. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-06Input: ALPS - detect trackstick presence for v7 protocolPali Rohár
This patch adds detection of trackstick for v7 protocol devices. Code in this patch is used in official Dell touchpad linux drivers for Dell models: Dell Latitude E5250/5250, E5450/5450, E5550/5550 Detection code and base reg for alps v3 rushmore and v7 devices is exacly same. Also user in bug https://bugzilla.kernel.org/show_bug.cgi?id=94801 reported that Toshiba Sattellite Z30-A-1DG has only alps v7 touchpad device without trackstick and kernel reports to userspace also redundant trackstick device. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-04Input: xpad - use LED API when identifying wireless controllersDmitry Torokhov
When lighting up the segment identifying wireless controller, Instead of sending command directly to the controller, let's do it via LED API (usinf led_set_brightness) so that LED object state is in sync with controller state and we'll light up the correct segment on resume as well. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-04Input: xpad - workaround dead irq_out after suspend/ resumePavel Rojtberg
The irq_out urb is dead after suspend/ resume on my x360 wr pad. (also reproduced by Zachary Lund [0]) Work around this by implementing suspend, resume, and reset_resume callbacks and properly shutting down URBs on suspend and restarting them on resume. [0]: https://github.com/paroj/xpad/issues/6 Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-04Input: xpad - update Xbox One Force Feedback SupportPierre-Loup A. Griffais
There's apparently a serial number woven into both input and output packets; neglecting to specify a valid serial number causes the controller to ignore the rumble packets. The scale of the rumble was also apparently halved in the packets. The initialization packet had to be changed to allow force feedback to work. see https://github.com/paroj/xpad/issues/7 for details. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-04Input: xpad - correctly handle concurrent LED and FF requestsPavel Rojtberg
Track the status of the irq_out URB to prevent submission iof new requests while current one is active. Failure to do so results in the "URB submitted while active" warning/stack trace. Store pending brightness and FF effect in the driver structure and replace it with the latest requests until the device is ready to process next request. Alternate serving LED vs FF requests to make sure one does not starve another. See [1] for discussion. Inspired by patch of Sarah Bessmer [2]. [1]: http://www.spinics.net/lists/linux-input/msg40708.html [2]: http://www.spinics.net/lists/linux-input/msg31450.html Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-02Input: pcap_ts - use to_delayed_workGeliang Tang
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-02Input: bma150 - constify bma150_cfg structureJulia Lawall
The bma150_cfg structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-02Input: i8042 - add Fujitsu Lifebook U745 to the nomux listAurélien Francillon
Without i8042.nomux=1 the Elantech touch pad is not working at all on a Fujitsu Lifebook U745. This patch does not seem necessary for all U745 (maybe because of different BIOS versions?). However, it was verified that the patch does not break those (see opensuse bug 883192: https://bugzilla.opensuse.org/show_bug.cgi?id=883192). Signed-off-by: Aurélien Francillon <aurelien@francillon.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-21Drivers: hv: vmbus: fix the building warning with hyperv-keyboardDexuan Cui
With the recent change af3ff643ea91ba64dd8d0b1cbed54d44512f96cd (Drivers: hv: vmbus: Use uuid_le type consistently), we always get this warning: CC [M] drivers/input/serio/hyperv-keyboard.o drivers/input/serio/hyperv-keyboard.c:427:2: warning: missing braces around initializer [-Wmissing-braces] { HV_KBD_GUID, }, ^ drivers/input/serio/hyperv-keyboard.c:427:2: warning: (near initialization for .id_table[0].guid.b.) [-Wmissing-braces] The patch fixes the warning. Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-21Merge tag 'v4.4-rc6' into develLinus Walleij
Linux 4.4-rc6
2015-12-19Input: egalax_ts_serial - fix potential NULL dereference on errorDan Carpenter
We didn't check input_allocate_device() for failures so it could lead to a NULL deref. Fixes: 6b0f8f9c52ef ('Input: add eGalaxTouch serial touchscreen driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a few assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elants_i2c - fix wake-on-touch Input: elan_i2c - set input device's vendor and product IDs Input: sun4i-lradc-keys - fix typo in binding documentation Input: atmel_mxt_ts - add maxtouch to I2C table for module autoload Input: arizona-haptic - fix disabling of haptics device Input: aiptek - fix crash on detecting device without endpoints Input: atmel_mxt_ts - add generic platform data for Chromebooks Input: parkbd - clear unused function pointers Input: walkera0701 - clear unused function pointers Input: turbografx - clear unused function pointers Input: gamecon - clear unused function pointers Input: db9 - clear unused function pointers
2015-12-18Input: uinput - sanity check on ff_effects_max and EV_FFElias Vanderstuyft
Currently the user can set ff_effects_max to zero with the EV_FF bit (and the FF_GAIN and/or FF_AUTOCENTER bits) set, in this case the uninitialized methods ff->set_gain and/or ff->set_autocenter can be dereferenced, resulting in a kernel oops. Check in uinput_create_device() and print a helpful message and return -EINVAL in case the check fails. Signed-off-by: Elias Vanderstuyft <elias.vds@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-18Input: uinput - rework ABS validationDavid Herrmann
Rework the uinput ABS validation to check passed absinfo data immediately, but do ABS initialization as last step in UI_DEV_CREATE. The behavior observed by user-space is not changed, as ABS initialization was never checked for errors. With this in place, the order of device initialization and abs configuration is no longer fixed. Userspace can initialize the device and afterwards set absinfo just fine. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-18Input: uinput - add new UINPUT_DEV_SETUP and UI_ABS_SETUP ioctlBenjamin Tissoires
This adds two new ioctls, UINPUT_DEV_SETUP and UI_ABS_SETUP, that replaces the old device setup method (by write()'ing "struct uinput_user_dev" to the node). The old method is not easily extendable and requires huge payloads. Furthermore, overloading write() without properly versioned objects is error-prone. Therefore, we introduce two new ioctls to replace the old method. These ioctls support all features of the old method, plus a "resolution" field for absinfo. Furthermore, it's properly forward-compatible to new ABS codes and a growing "struct input_absinfo" structure. UI_ABS_SETUP also allows user-space to skip unknown axes if not set. There is no need to copy the whole array temporarily into the kernel, but instead the caller issues several ioctl where we copy each value manually. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-18Input: elants_i2c - fix wake-on-touchJames Chen
When sending "SLEEP" command to the controller it ceases scanning completely and is unable to wake the system up from sleep, so if it is configured as a wakeup source we should simply configure interrupt for wakeup and rely on idle logic within the controller to reduce power consumption while it is not used. Signed-off-by: James Chen <james.chen@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-18[media] media: videobuf2: Move timestamp to vb2_bufferJunghak Sung
Move timestamp from struct vb2_v4l2_buffer to struct vb2_buffer for common use, and change its type to u64 in order to handling y2038 problem. This patch also includes all device drivers' changes related to this restructuring. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-18[media] vb2: drop v4l2_format argument from queue_setupHans Verkuil
The queue_setup callback has a void pointer that is just for V4L2 and is the pointer to the v4l2_format struct that was passed to VIDIOC_CREATE_BUFS. The idea was that drivers would use the information from that struct to buffers suitable for the requested format. After the vb2 split series this pointer is now a void pointer, which is ugly, and the reality is that all existing drivers will effectively just look at the sizeimage field of v4l2_format. To make this more generic the queue_setup callback is changed: the void pointer is dropped, instead if the *num_planes argument is 0, then use the current format size, if it is non-zero, then it contains the number of requested planes and the sizes array contains the requested sizes. If either is unsupported, then return -EINVAL, otherwise use the requested size(s). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-17Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen"Karsten Merker
The goodix touchscreen driver uses a "rotated_screen" flag for systems on which the touchscreen is mounted rotated by 180 degrees with respect to the display. With the addition of support for the dt properties "touchscreen-inverted-x" and "touchscreen-inverted-y", a separate "rotated_screen" flag is not necessary anymore. This patch replaces it by setting the inverted_x and inverted_y flags instead. Signed-off-by: Karsten Merker <merker@debian.org> Reviewed-by: Irina Tirdea <irina.tirdea@intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>