summaryrefslogtreecommitdiff
path: root/drivers/leds/leds-lp5521.c
AgeCommit message (Collapse)Author
2014-02-27drivers/leds: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-01-28Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu: "Basically this cycle is mostly cleanup for LED subsystem" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: s3c24xx: Remove hardware.h inclusion leds: replace list_for_each with list_for_each_entry leds: kirkwood: Cleanup in header files leds: pwm: Remove a warning on non-DT platforms leds: leds-pwm: fix duty time overflow. leds: leds-mc13783: Remove unneeded mc13xxx_{un}lock leds: leds-mc13783: Remove duplicate field in platform data drivers: leds: leds-tca6507: check CONFIG_GPIOLIB whether defined for 'gpio_base' leds: lp5523: Support LED MUX configuration on running a pattern leds: lp5521/5523: Fix multiple engine usage bug LEDS: tca6507 - fix up some comments. LEDS: tca6507: add device-tree support for GPIO configuration. LEDS: tca6507 - fix bugs in parsing of device-tree configuration.
2014-01-27leds: lp5521/5523: Fix multiple engine usage bugMilo Kim
Whenever the engine is loaded by the user-application, the operation mode is reset first. But it has a problem in case of multiple engine used because previous engine settings are cleared. The driver should update not whole 8bits but each engine bit by masking. On the other hands, whole engines should be reset when the driver is unloaded and on initializing the LP5523 driver. So, new functions are used for this handling - lp5521/5523_stop_all_engines(). Cc: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-01-10leds: lp5521/5523: Remove duplicate mutexMilo Kim
It can be a problem when a pattern is loaded via the firmware interface. LP55xx common driver has already locked the mutex in 'lp55xx_firmware_loaded()'. So it should be deleted. On the other hand, locks are required in store_engine_load() on updating program memory. Reported-by: Pali Rohár <pali.rohar@gmail.com> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com> Cc: <stable@vger.kernel.org>
2013-08-26leds: lp5521: remove unnecessary writing commandsMilo Kim
This patch reduces the number of programming commands. (Count of sending commands) Old code: 32 + program size (32 counts for clearing program memory) New code: 32 Pattern buffer is initialized to 0 in this function. Just update new program data and remaining buffers are filled with 0. So it's needless to clear whole area. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-08-26leds: lp5521: restore legacy device attributesMilo Kim
git commit 9ce7cb170f97f83a78dc948bf7d25690f15e1328 may cause an application confict, engineN_mode and engineN_load. This interface should be maintained for compatibility. Restored device attributes are 'engineN_mode' and 'engineN_load'. A 'selftest' attribute macro is replaced with LP55xx common macro. Use a mutex in lp5521_update_program_memory() : This function is called when an user-application writes a 'engineN_load' file or pattern data is loaded from generic firmware interface. So, writing program memory should be protected. If an error occurs on accessing this area, just it returns as -EINVAL quickly. This error code is exact same as old driver function, lp5521_do_store_load() because it should be kept for an user-application compatibility. Even the driver is changed, we can use the application without re-compiling sources. 'led_pattern' attribute is not included : engineN_mode and _load were created for custom user-application. 'led_pattern' is an exception. I added this attribute not for custom application but for simple test. Now it is used only in LP5562 driver, not LP5521. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-08-26leds: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-06-20leds: lp5521: Properly setup of_device_id tableAxel Lin
Don't mix of_device_id entry in i2c_device_id table. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-06-20leds: lp55xx: add support for Device Tree bindingsLinus Walleij
This patch allows the lp5521 driver to be successfully probed and initialised when Device Tree support is enabled. Based on a patch by Gabriel Fernandez, rewritten in accordance with review feedback. Cc: Gabriel Fernandez <gabriel.fernandez@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01leds: lp55xx: configure the clock detectionKim, Milo
Now LP55xx provides automatic clock detection API, lp55xx_is_extclk_used(). The clock configuration can be done by the driver itself. (a) Concept The default value is set by each driver with clock selection. The internal clock selection bit is updated in case that the external clock is not detected or clock rate is not 32KHz. (b) Change on LP55xx platform data The clock configuration is done automatically, so no need to define 'update_config' in the platform side. Correlated information are removed in the documentations and header. (c) Definitions moved from header to driver files CONFIG register values are moved each driver, LP5521 and LP5562. Not necessary definitions are removed also. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-04-01leds: lp55xx: fix the sysfs read operationKim, Milo
According to a sysfs documentation(Documentation/filesystem/sysfs.txt), scnprintf() should be used in a read operation method. It guarantees safe buffer size(PAGE_SIZE) which is allocated by the sysfs. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp5521/5523: add author and copyright descriptionMilo(Woogyom) Kim
Now LP5521 and LP5523 drivers are based on new lp55xx structure. So the author and copyrights are updated. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: clean up headersMilo(Woogyom) Kim
Remove unused headers and sort them alphabetically Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: clean up definitionsMilo(Woogyom) Kim
Remove unused definitions and change hex values to capital letters Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: clean up unused data and functionsMilo(Woogyom) Kim
Old data structures and I2C function are not used any more. Each driver uses the lp55xx common data and functions. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: clean up _remove()Milo(Woogyom) Kim
Replace lp5521/5523_unregister_sysfs() with lp55xx_unregister_sysfs(). On unloading the driver, running engines should be stopped. Use explicit driver function, lp5521/5523_stop_engine(). Unused functions are removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: code refactoring on selftest functionMilo(Woogyom) Kim
LP5521 and LP5523 have a selftest function which is run via the sysfs. Use lp55xx driver data and R/W functions rather than lp5521/5523 private data and functions. Additionally, if-statements are changed for code simplicity. Unused functions, lp5521/5523_read() are removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: use common device attribute driver functionMilo(Woogyom) Kim
lp5521/5523_register_sysfs() are replaced with lp55xx common driver function, lp55xx_register_sysfs(). Chip specific device attributes are configurable using 'dev_attr_group'. Error condition name is changed: use specific error condition, 'err_register_sysfs' rather than unclear name, 'fail2'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp5521: use generic firmware interfaceMilo(Woogyom) Kim
LP55xx common driver provides generic firmware interface for running a LED pattern. LP5521 and LP5523 have many device attributes for running patterns. This patch cleans up those complex code. Removed device attributes: engine1_mode engine2_mode engine3_mode engine1_load engine2_load engine3_load led_pattern All device attributes and functions are replaced with two callback functions, 'firmware_cb' and 'run_engine'. New engine functions: lp5521_load/stop/run_engine(), lp5521_update_program_memory() and lp5521_wait_opmode_done() Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: use lp55xx_unregister_leds()Milo(Woogyom) Kim
To unregister led class devices and sysfs attributes, LP5521 and LP5523 have each driver function. This patch makes both drivers simple using common driver function, lp55xx_unregister_leds(). And some unused variables are removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: provide common LED current settingMilo(Woogyom) Kim
LED current is configurable via the sysfs. Max current is a read-only attribute. These attributes code can be shared in lp55xx common driver. Device attributes: 'led_current' and 'max_current' move to lp55xx common driver Replaced functions: show_max_current() => lp55xx_show_max_current() show_current() => lp55xx_show_current() store_current() => lp55xx_store_current() LED setting function: set_led_current() Current registers are device specific, so configurable function is added in each driver. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: use lp55xx_set_brightness()Milo(Woogyom) Kim
lp5521_set_brightness() and lp5523_set_brightness() are replaced with common function, lp55xx_set_brightness(). This function is invoked when the brightness of each LED channel is updated. LP5521 and LP5523 have different register address for the brightness control, so this work is done by chip specific brightness_work_fn(). lp5521/5523_led_brightness_work(): use lp55xx_led and lp55xx_chip data structure. use lp55xx write function. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: use lp55xx_init_led() common functionMilo(Woogyom) Kim
lp5521_init_led() and lp5523_init_led() are replaced with one common function, lp55xx_init_led(). Max channels is configurable, so it's used in lp55xx_init_led(). 'LP5523_LEDS' are changed to 'LP5523_MAX_LEDS'. lp55xx_set_brightness, lp55xx_led_attributes: skeleton Will be filled in next patches. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: use lp55xx common led registration functionMilo(Woogyom) Kim
LED class devices are registered in lp5521_register_leds() and lp5523_register_leds(). Two separate functions are merged into consolidated lp55xx function, lp55xx_register_leds(). Error handling fix: Unregistering LEDS are handled in lp55xx_register_leds() when LED registration failure occurs. So each driver error handler is changed to 'err_register_leds' Chip dependency: 'brightness_work_fn' and 'set_led_current' To make the structure abstract, both functions are configured in each driver. Those functions should be done by each driver because register control is chip-dependant work. lp55xx_init_led: skeleton Will be filled in next patch Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: use lp55xx common deinit functionMilo(Woogyom) Kim
Two separate de-init functions are merged into one common function. And it is used in err_post_init of lp55xx_init_device(). Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: clean up init functionMilo(Woogyom) Kim
lp5521/5523_init_device() are replaced with lp55xx common function, lp55xx_init_device(). Error handler in init_device: deinit function are matched with 'err_post_init' section in lp55xx_init_device(). Remove LP5523 engine intialization code: Engine functionality is not mandatory but optional. Moreover engine initialization is done internally with device reset command. Therefore, this code is unnecessary. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: use lp55xx common init function - post intMilo(Woogyom) Kim
LP5521/5523 chip configuration is replaced with lp55xx common function, lp55xx_post_init_device(). Name change: lp5521/5523_configure() to lp5521/5523_post_init_device() These are called in init function. Register access function Argument type is changed from 'i2c_client' to 'lp55xx_chip'. Use exported R/W functions of lp55xx common driver. Temporary variables in lp5521/5523_init_device() These functions will be removed but temporary variables are needed for blocking build warnings - incompatible pointer. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: use lp55xx common init function - detectMilo(Woogyom) Kim
LP5521/5523 chip detection functions are replaced with lp55xx common function, lp55xx_detect_device(). Chip dependent address and values are configurable in each driver. In init function, chip detection is executed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: use lp55xx common init function - resetMilo(Woogyom) Kim
LP5521/5523 reset device functions are moved to lp55xx common driver. Value of register address and value are chip dependent. Those are configured in each driver. In init function, reset command is executed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: use lp55xx common init function - platform dataMilo(Woogyom) Kim
LP5521/5523 platform data functions are moved to lp55xx common driver. New init function, lp55xx_init_device() is created. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp5521: clean up lp5521_configure()Milo(Woogyom) Kim
This patch is a preceding step for making common lp55xx init function. LP5521_REG_R_CURRENT register code moved: Chip specific code moved from lp5521_init_device() to lp5521_configure(). Remove engine init function: LP5521 has internal program engines which are used for running LED patterns. (blinking, ramp up/down and other emotional visual effects) Engine initialization is done by reset command in lp5521_init_device(). Remove this duplicate code. Return code: Do not use 'OR' arithmetic for the result. If some error occus, just return it. Enable latency: Use explicit named function, lp5521_wait_enable_done(). According to the datasheet, 500us is guaranteed time. Thus wait time is changed from 1000us to 500us. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: use common lp55xx data structure in _probe()Milo(Woogyom) Kim
LP5521 and LP5523 data structures have common features. Use common lp55xx data structures rather than chip specific data. Legacy code in probe is replaced with this new data structures. lp55xx_chip : Common data between lp5521_chip and lp5523_chip lp55xx_led : Common LED structure between lp5521_led and lp5523_led lp55xx_platform_data : Common platform data between lp5521_platform_data and lp5523_platform_data Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: replace name of data structureMilo(Woogyom) Kim
Change the name of chip data structure and platform data. This patch is a preceding step for cleaning up lp5521/5523 probe and remove. These data will be replaced with new lp55xx common data structures in next patch. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: do chip specific configuration on device initMilo(Woogyom) Kim
Chip specific function is configured when the device is initialized. So _configure() is moved to each device init function. If chip configuration gets failed, the device is de-initialized in each _init_device(), not probe(). For compile error fix, function type declarations are added. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: add device reset function in lp5521/5523Milo(Woogyom) Kim
Use explicit each driver function rather than raw command. These function will be merged into the lp55xx common driver. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: clean up deinit leds in lp5521/5523Milo(Woogyom) Kim
To make LED unregistration code simple, new function, _unregister_leds() is added in each driver. This patch is a preceding step for lp55xx common driver architecture. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: clean up init leds in lp5521/5523Milo(Woogyom) Kim
To make LED initialization code simple, new function, _register_leds() is added at each driver. This patch is a preceding step for lp55xx common driver architecture. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: clean up deinit_device() in lp5521/5523Milo(Woogyom) Kim
Device de-initialization code is moved to _deinit_device() at each driver. This patch is a preceding step for lp55xx common driver architecture. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-06leds-lp55xx: clean up init_device() in lp5521/5523Milo(Woogyom) Kim
To make _probe() simple, device initialization code is moved to _init_device() at each driver. This patch is a preceding step for lp55xx common driver architecture. leds-lp5521: When 'lp5521_init_device()' gets failed, error handling should be 'fail1' rather than 'fail2'. fail1: releasing platform resource and return code fail2: releasing allocated LED devices with handling 'fail1' The 'lp5521_init_device()' is called before creating LED devices. Thus, 'goto fail1' is proper error handler of this function. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-12-15Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (47 commits) leds: leds-lp5521: return an error code on error in probe() leds: leds-clevo-mail: Use pr_* instead of printks leds: leds-rb532: Fix checkpatch errors leds: led-triggers: Fix checkpatch warnings leds: ledtrig-backlight: Fix checkpatch error leds: leds-wrap: Use <linux/io.h> instead of <asm/io.h> leds: leds-wm8350: Use dev_err instead of printk leds: leds-pwm: Fix checkpatch warning leds: leds-pca955x: Use dev_info instead of printk leds: leds-net48xx: Use linux/io.h instead of asm/io.h leds: leds-lt3593: Fix checkpatch warnings leds: leds-gpio: Use dev_info instead of printk leds: leds-da903x: Fix checkpatch error and warnings leds: leds-bd2802: Fix checkpatch warnings leds: leds-adp5520: Fix checkpatch warnings leds: led-class: Fix checkpatch warning leds: leds-ns2: use devm_gpio_request_one leds: leds-lt3593: use devm_gpio_request_one leds: leds-gpio: use devm_gpio_request_one leds: lp3944: Fix return value ...
2012-12-03leds: leds-lp5521: return an error code on error in probe()Dan Carpenter
If "buf" wasn't equal to LP5521_REG_R_CURR_DEFAULT the probe fails but we still return zero. I've changed it to print an error message and return -EINVAL. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-28leds: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jan-Simon Moeller <jansimon.moeller@gmx.de> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28leds: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jan-Simon Moeller <jansimon.moeller@gmx.de> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28leds: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jan-Simon Moeller <jansimon.moeller@gmx.de> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26leds: lp5521: Fix return valueSachin Kamat
Return the value obtained from i2c_smbus_read_byte_data() instead of -EIO. Silences the following smatch warning: drivers/leds/leds-lp5521.c:155 lp5521_read() info: why not propagate 'ret' from i2c_smbus_read_byte_data() instead of -5? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-11-26leds: leds-lp5521: replace strict_strtoul() with kstrtoul()Jingoo Han
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2012-07-24leds: convert LP5521 LED driver to devm_kzalloc() and cleanup error exit pathBryan Wu
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-05-29drivers/leds/leds-lp5521.c: fix lp5521_read() error handlingDan Carpenter
Gcc 4.6.2 complains that: drivers/leds/leds-lp5521.c: In function `lp5521_load_program': drivers/leds/leds-lp5521.c:214:21: warning: `mode' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-lp5521.c: In function `lp5521_probe': drivers/leds/leds-lp5521.c:788:5: warning: `buf' may be used uninitialized in this function [-Wuninitialized] drivers/leds/leds-lp5521.c:740:6: warning: `ret' may be used uninitialized in this function [-Wuninitialized] These are real problems if lp5521_read() returns an error. When that happens we should handle it, instead of ignoring it or doing a bitwise OR with all the other error codes and continuing. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Milo <Milo.Kim@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-lp5521.c: ret may be uninitializedSrinidhi KASAGAR
Fix it by assigning the lp5521_read return value. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Cc: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arun MURTHY <arun.murthy@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23drivers/leds/leds-lp5521.c: redefinition of register bitsKim, Milo
For better readability, values of LP5521_REG_ENABLE register were redefined= . Additional definitions: LP5521_ENABLE_DEFAULT and LP5521_ENABLE_RUN_PROGRAM= . Use definition rather than hard code value. : 0x3F -> 'LP5521_CMD_DIRECT' Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arun MURTHY <arun.murthy@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>