summaryrefslogtreecommitdiff
path: root/drivers/md
AgeCommit message (Collapse)Author
2017-01-12dm space map metadata: fix 'struct sm_metadata' leak on failed createBenjamin Marzinski
[ Upstream commit 314c25c56c1ee5026cf99c570bdfe01847927acb ] In dm_sm_metadata_create() we temporarily change the dm_space_map operations from 'ops' (whose .destroy function deallocates the sm_metadata) to 'bootstrap_ops' (whose .destroy function doesn't). If dm_sm_metadata_create() fails in sm_ll_new_metadata() or sm_ll_extend(), it exits back to dm_tm_create_internal(), which calls dm_sm_destroy() with the intention of freeing the sm_metadata, but it doesn't (because the dm_space_map operations is still set to 'bootstrap_ops'). Fix this by setting the dm_space_map operations back to 'ops' if dm_sm_metadata_create() fails when it is set to 'bootstrap_ops'. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-01-12md/raid5: limit request size according to implementation limitsKonstantin Khlebnikov
[ Upstream commit e8d7c33232e5fdfa761c3416539bc5b4acd12db5 ] Current implementation employ 16bit counter of active stripes in lower bits of bio->bi_phys_segments. If request is big enough to overflow this counter bio will be completed and freed too early. Fortunately this not happens in default configuration because several other limits prevent that: stripe_cache_size * nr_disks effectively limits count of active stripes. And small max_sectors_kb at lower disks prevent that during normal read/write operations. Overflow easily happens in discard if it's enabled by module parameter "devices_handle_discard_safely" and stripe_cache_size is set big enough. This patch limits requests size with 256Mb - 8Kb to prevent overflows. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Shaohua Li <shli@kernel.org> Cc: Neil Brown <neilb@suse.com> Cc: stable@vger.kernel.org Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2017-01-12dm crypt: mark key as invalid until properly loadedOndrej Kozina
[ Upstream commit 265e9098bac02bc5e36cda21fdbad34cb5b2f48d ] In crypt_set_key(), if a failure occurs while replacing the old key (e.g. tfm->setkey() fails) the key must not have DM_CRYPT_KEY_VALID flag set. Otherwise, the crypto layer would have an invalid key that still has DM_CRYPT_KEY_VALID flag set. Cc: stable@vger.kernel.org Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-11-25md: be careful not lot leak internal curr_resync value into metadata. -- (all)NeilBrown
[ Upstream commit 1217e1d1999ed6c9c1e1b1acae0a74ab70464ae2 ] mddev->curr_resync usually records where the current resync is up to, but during the starting phase it has some "magic" values. 1 - means that the array is trying to start a resync, but has yielded to another array which shares physical devices, and also needs to start a resync 2 - means the array is trying to start resync, but has found another array which shares physical devices and has already started resync. 3 - means that resync has commensed, but it is possible that nothing has actually been resynced yet. It is important that this value not be visible to user-space and particularly that it doesn't get written to the metadata, as the resync or recovery checkpoint. In part, this is because it may be slightly higher than the correct value, though this is very rare. In part, because it is not a multiple of 4K, and some devices only support 4K aligned accesses. There are two places where this value is propagates into either ->curr_resync_completed or ->recovery_cp or ->recovery_offset. These currently avoid the propagation of values 1 and 3, but will allow 3 to leak through. Change them to only propagate the value if it is > 3. As this can cause an array to fail, the patch is suitable for -stable. Cc: stable@vger.kernel.org (v3.7+) Reported-by: Viswesh <viswesh.vichu@gmail.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-11-25md: sync sync_completed has correct value as recovery finishes.NeilBrown
[ Upstream commit 5ed1df2eacc0ba92c8c7e2499c97594b5ef928a8 ] There can be a small window between the moment that recovery actually writes the last block and the time when various sysfs and /proc/mdstat attributes report that it has finished. During this time, 'sync_completed' can have the wrong value. This can confuse monitoring software. So: - don't set curr_resync_completed beyond the end of the devices, - set it correctly when resync/recovery has completed. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-11-23dm table: fix missing dm_put_target_type() in dm_table_add_target()tang.junhui
[ Upstream commit dafa724bf582181d9a7d54f5cb4ca0bf8ef29269 ] dm_get_target_type() was previously called so any error returned from dm_table_add_target() must first call dm_put_target_type(). Otherwise the DM target module's reference count will leak and the associated kernel module will be unable to be removed. Also, leverage the fact that r is already -EINVAL and remove an extra newline. Fixes: 36a0456 ("dm table: add immutable feature") Fixes: cc6cbe1 ("dm table: add always writeable feature") Fixes: 3791e2f ("dm table: add singleton feature") Cc: stable@vger.kernel.org # 3.2+ Signed-off-by: tang.junhui <tang.junhui@zte.com.cn> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-09-15dm crypt: fix free of bad values after tfm allocation failureEric Biggers
[ Upstream commit 5d0be84ec0cacfc7a6d6ea548afdd07d481324cd ] If crypt_alloc_tfms() had to allocate multiple tfms and it failed before the last allocation, then it would call crypt_free_tfms() and could free pointers from uninitialized memory -- due to the crypt_free_tfms() check for non-zero cc->tfms[i]. Fix by allocating zeroed memory. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-09-15dm crypt: fix error with too large biosMikulas Patocka
[ Upstream commit 4e870e948fbabf62b78e8410f04c67703e7c816b ] When dm-crypt processes writes, it allocates a new bio in crypt_alloc_buffer(). The bio is allocated from a bio set and it can have at most BIO_MAX_PAGES vector entries, however the incoming bio can be larger (e.g. if it was allocated by bcache). If the incoming bio is larger, bio_alloc_bioset() fails and an error is returned. To avoid the error, we test for a too large bio in the function crypt_map() and use dm_accept_partial_bio() to split the bio. dm_accept_partial_bio() trims the current bio to the desired size and asks DM core to send another bio with the rest of the data. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-09-15dm log writes: fix check of kthread_run() return valueVladimir Zapolskiy
[ Upstream commit 91e630d9ae6de6f740ef7c8176736eb55366833e ] The kthread_run() function returns either a valid task_struct or ERR_PTR() value, check for NULL is invalid. This change fixes potential for oops, e.g. in OOM situation. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-09-15dm log writes: fix bug with too large biosMikulas Patocka
[ Upstream commit 7efb367320f56fc4d549875b6f3a6940018ef2e5 ] bio_alloc() can allocate a bio with at most BIO_MAX_PAGES (256) vector entries. However, the incoming bio may have more vector entries if it was allocated by other means. For example, bcache submits bios with more than BIO_MAX_PAGES entries. This results in bio_alloc() failure. To avoid the failure, change the code so that it allocates bio with at most BIO_MAX_PAGES entries. If the incoming bio has more entries, bio_add_page() will fail and a new bio will be allocated - the code that handles bio_add_page() failure already exists in the dm-log-writes target. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Josef Bacik <jbacik@fb,com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-09-15dm log writes: move IO accounting earlier to fix error pathMikulas Patocka
[ Upstream commit a5d60783df61fbb67b7596b8a0f6b4b2e05251d5 ] Move log_one_block()'s atomic_inc(&lc->io_blocks) before bio_alloc() to fix a bug that the target hangs if bio_alloc() fails. The error path does put_io_block(lc), so atomic_inc(&lc->io_blocks) must occur before invoking the error path to avoid underflow of lc->io_blocks. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Josef Bacik <jbacik@fb,com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-08-31dm flakey: fix reads to be issued if drop_writes configuredMike Snitzer
[ Upstream commit 299f6230bc6d0ccd5f95bb0fb865d80a9c7d5ccc ] v4.8-rc3 commit 99f3c90d0d ("dm flakey: error READ bios during the down_interval") overlooked the 'drop_writes' feature, which is meant to allow reads to be issued rather than errored, during the down_interval. Fixes: 99f3c90d0d ("dm flakey: error READ bios during the down_interval") Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-08-31bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.Kent Overstreet
[ Upstream commit acc9cf8c66c66b2cbbdb4a375537edee72be64df ] This patch fixes a cachedev registration-time allocation deadlock. This can deadlock on boot if your initrd auto-registeres bcache devices: Allocator thread: [ 720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds. [ 720.732361] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.732963] [<ffffffffa05192b8>] bch_bucket_alloc+0x188/0x360 [bcache] [ 720.733538] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.734137] [<ffffffffa05302bd>] bch_prio_write+0x19d/0x340 [bcache] [ 720.734715] [<ffffffffa05190bf>] bch_allocator_thread+0x3ff/0x470 [bcache] [ 720.735311] [<ffffffff816ee41c>] ? __schedule+0x2dc/0x950 [ 720.735884] [<ffffffffa0518cc0>] ? invalidate_buckets+0x980/0x980 [bcache] Registration thread: [ 720.710403] INFO: task bash:3531 blocked for more than 120 seconds. [ 720.715226] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.715805] [<ffffffffa05235cd>] __bch_btree_map_nodes+0x12d/0x150 [bcache] [ 720.716409] [<ffffffffa0522d30>] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache] [ 720.717008] [<ffffffffa05236e4>] bch_btree_insert+0xf4/0x170 [bcache] [ 720.717586] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.718191] [<ffffffffa0527d9a>] bch_journal_replay+0x14a/0x290 [bcache] [ 720.718766] [<ffffffff810cc90d>] ? ttwu_do_activate.constprop.94+0x5d/0x70 [ 720.719369] [<ffffffff810cf684>] ? try_to_wake_up+0x1d4/0x350 [ 720.719968] [<ffffffffa05317d0>] run_cache_set+0x580/0x8e0 [bcache] [ 720.720553] [<ffffffffa053302e>] register_bcache+0xe2e/0x13b0 [bcache] [ 720.721153] [<ffffffff81354cef>] kobj_attr_store+0xf/0x20 [ 720.721730] [<ffffffff812a2dad>] sysfs_kf_write+0x3d/0x50 [ 720.722327] [<ffffffff812a225a>] kernfs_fop_write+0x12a/0x180 [ 720.722904] [<ffffffff81225177>] __vfs_write+0x37/0x110 [ 720.723503] [<ffffffff81228048>] ? __sb_start_write+0x58/0x110 [ 720.724100] [<ffffffff812cedb3>] ? security_file_permission+0x23/0xa0 [ 720.724675] [<ffffffff812258a9>] vfs_write+0xa9/0x1b0 [ 720.725275] [<ffffffff8102479c>] ? do_audit_syscall_entry+0x6c/0x70 [ 720.725849] [<ffffffff81226755>] SyS_write+0x55/0xd0 [ 720.726451] [<ffffffff8106a390>] ? do_page_fault+0x30/0x80 [ 720.727045] [<ffffffff816f2cae>] system_call_fastpath+0x12/0x71 The fifo code in upstream bcache can't use the last element in the buffer, which was the cause of the bug: if you asked for a power of two size, it'd give you a fifo that could hold one less than what you asked for rather than allocating a buffer twice as big. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-08-31bcache: register_bcache(): call blkdev_put() when cache_alloc() failsEric Wheeler
[ Upstream commit d9dc1702b297ec4a6bb9c0326a70641b322ba886 ] register_cache() is supposed to return an error string on error so that register_bcache() will will blkdev_put and cleanup other user counters, but it does not set 'char *err' when cache_alloc() fails (eg, due to memory pressure) and thus register_bcache() performs no cleanup. register_bcache() <----------\ <- no jump to err_close, no blkdev_put() | | +->register_cache() | <- fails to set char *err | | +->cache_alloc() ---/ <- returns error This patch sets `char *err` for this failure case so that register_cache() will cause register_bcache() to correctly jump to err_close and do cleanup. This was tested under OOM conditions that triggered the bug. Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-08-19dm: set DMF_SUSPENDED* _before_ clearing DMF_NOFLUSH_SUSPENDINGMike Snitzer
[ Upstream commit eaf9a7361f47727b166688a9f2096854eef60fbe ] Otherwise, there is potential for both DMF_SUSPENDED* and DMF_NOFLUSH_SUSPENDING to not be set during dm_suspend() -- which is definitely _not_ a valid state. This fix, in conjuction with "dm rq: fix the starting and stopping of blk-mq queues", addresses the potential for request-based DM multipath's __multipath_map() to see !dm_noflush_suspending() during suspend. Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-08-19dm rq: fix the starting and stopping of blk-mq queuesSasha Levin
[ Upstream commit 7d9595d848cdff5c7939f68eec39e0c5d36a1d67 ] Improve dm_stop_queue() to cancel any requeue_work. Also, have dm_start_queue() and dm_stop_queue() clear/set the QUEUE_FLAG_STOPPED for the blk-mq request_queue. On suspend dm_stop_queue() handles stopping the blk-mq request_queue BUT: even though the hw_queues are marked BLK_MQ_S_STOPPED at that point there is still a race that is allowing block/blk-mq.c to call ->queue_rq against a hctx that it really shouldn't. Add a check to dm_mq_queue_rq() that guards against this rarity (albeit _not_ race-free). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # must patch dm.c on < 4.8 kernels Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-08-19dm flakey: error READ bios during the down_intervalMike Snitzer
[ Upstream commit 99f3c90d0d85708e7401a81ce3314e50bf7f2819 ] When the corrupt_bio_byte feature was introduced it caused READ bios to no longer be errored with -EIO during the down_interval. This had to do with the complexity of needing to submit READs if the corrupt_bio_byte feature was used. Fix it so READ bios are properly errored with -EIO; doing so early in flakey_map() as long as there isn't a match for the corrupt_bio_byte feature. Fixes: a3998799fb4df ("dm flakey: add corrupt_bio_byte feature") Reported-by: Akira Hayakawa <ruby.wktk@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-08-19dm: fix second blk_delay_queue() parameter to be in msec units not jiffiesSasha Levin
[ Upstream commit bd9f55ea1cf6e14eb054b06ea877d2d1fa339514 ] Commit d548b34b062 ("dm: reduce the queue delay used in dm_request_fn from 100ms to 10ms") always intended the value to be 10 msecs -- it just expressed it in jiffies because earlier commit 7eaceaccab ("block: remove per-queue plugging") did. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Fixes: d548b34b062 ("dm: reduce the queue delay used in dm_request_fn from 100ms to 10ms") Cc: stable@vger.kernel.org # 4.1+ -- stable@ backports must be applied to drivers/md/dm.c Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-07-10dm snapshot: disallow the COW and origin devices from being identicalDingXiang
[ Upstream commit 4df2bf466a9c9c92f40d27c4aa9120f4e8227bfc ] Otherwise loading a "snapshot" table using the same device for the origin and COW devices, e.g.: echo "0 20971520 snapshot 253:3 253:3 P 8" | dmsetup create snap will trigger: BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 [ 1958.979934] IP: [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1958.989655] PGD 0 [ 1958.991903] Oops: 0000 [#1] SMP ... [ 1959.059647] CPU: 9 PID: 3556 Comm: dmsetup Tainted: G IO 4.5.0-rc5.snitm+ #150 ... [ 1959.083517] task: ffff8800b9660c80 ti: ffff88032a954000 task.ti: ffff88032a954000 [ 1959.091865] RIP: 0010:[<ffffffffa040efba>] [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.104295] RSP: 0018:ffff88032a957b30 EFLAGS: 00010246 [ 1959.110219] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001 [ 1959.118180] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff880329334a00 [ 1959.126141] RBP: ffff88032a957b50 R08: 0000000000000000 R09: 0000000000000001 [ 1959.134102] R10: 000000000000000a R11: f000000000000000 R12: ffff880330884d80 [ 1959.142061] R13: 0000000000000008 R14: ffffc90001c13088 R15: ffff880330884d80 [ 1959.150021] FS: 00007f8926ba3840(0000) GS:ffff880333440000(0000) knlGS:0000000000000000 [ 1959.159047] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1959.165456] CR2: 0000000000000098 CR3: 000000032f48b000 CR4: 00000000000006e0 [ 1959.173415] Stack: [ 1959.175656] ffffc90001c13040 ffff880329334a00 ffff880330884ed0 ffff88032a957bdc [ 1959.183946] ffff88032a957bb8 ffffffffa040f225 ffff880329334a30 ffff880300000000 [ 1959.192233] ffffffffa04133e0 ffff880329334b30 0000000830884d58 00000000569c58cf [ 1959.200521] Call Trace: [ 1959.203248] [<ffffffffa040f225>] dm_exception_store_create+0x1d5/0x240 [dm_snapshot] [ 1959.211986] [<ffffffffa040d310>] snapshot_ctr+0x140/0x630 [dm_snapshot] [ 1959.219469] [<ffffffffa0005c44>] ? dm_split_args+0x64/0x150 [dm_mod] [ 1959.226656] [<ffffffffa0005ea7>] dm_table_add_target+0x177/0x440 [dm_mod] [ 1959.234328] [<ffffffffa0009203>] table_load+0x143/0x370 [dm_mod] [ 1959.241129] [<ffffffffa00090c0>] ? retrieve_status+0x1b0/0x1b0 [dm_mod] [ 1959.248607] [<ffffffffa0009e35>] ctl_ioctl+0x255/0x4d0 [dm_mod] [ 1959.255307] [<ffffffff813304e2>] ? memzero_explicit+0x12/0x20 [ 1959.261816] [<ffffffffa000a0c3>] dm_ctl_ioctl+0x13/0x20 [dm_mod] [ 1959.268615] [<ffffffff81215eb6>] do_vfs_ioctl+0xa6/0x5c0 [ 1959.274637] [<ffffffff81120d2f>] ? __audit_syscall_entry+0xaf/0x100 [ 1959.281726] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70 [ 1959.288814] [<ffffffff81216449>] SyS_ioctl+0x79/0x90 [ 1959.294450] [<ffffffff8167e4ae>] entry_SYSCALL_64_fastpath+0x12/0x71 ... [ 1959.323277] RIP [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.333090] RSP <ffff88032a957b30> [ 1959.336978] CR2: 0000000000000098 [ 1959.344121] ---[ end trace b049991ccad1169e ]--- Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1195899 Cc: stable@vger.kernel.org Signed-off-by: Ding Xiang <dingxiang@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-05-17MD: make bio mergeableShaohua Li
[ Upstream commit 9c573de3283af007ea11c17bde1e4568d9417328 ] blk_queue_split marks bio unmergeable, which makes sense for normal bio. But if dispatching the bio to underlayer disk, the blk_queue_split checks are invalid, hence it's possible the bio becomes mergeable. In the reported bug, this bug causes trim against raid0 performance slash https://bugzilla.kernel.org/show_bug.cgi?id=117051 Reported-and-tested-by: Park Ju Hyung <qkrwngud825@gmail.com> Fixes: 6ac45aeb6bca(block: avoid to merge splitted bio) Cc: stable@vger.kernel.org (v4.3+) Cc: Ming Lei <ming.lei@canonical.com> Cc: Neil Brown <neilb@suse.de> Reviewed-by: Jens Axboe <axboe@fb.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18md: multipath: don't hardcopy bio in .make_request pathMing Lei
[ Upstream commit fafcde3ac1a418688a734365203a12483b83907a ] Inside multipath_make_request(), multipath maps the incoming bio into low level device's bio, but it is totally wrong to copy the bio into mapped bio via '*mapped_bio = *bio'. For example, .__bi_remaining is kept in the copy, especially if the incoming bio is chained to via bio splitting, so .bi_end_io can't be called for the mapped bio at all in the completing path in this kind of situation. This patch fixes the issue by using clone style. Cc: stable@vger.kernel.org (v3.14+) Reported-and-tested-by: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18dm thin metadata: don't issue prefetches if a transaction abort has failedJoe Thornber
[ Upstream commit 2eae9e4489b4cf83213fa3bd508b5afca3f01780 ] If a transaction abort has failed then we can no longer use the metadata device. Typically this happens if the superblock is unreadable. This fix addresses a crash seen during metadata device failure testing. Fixes: 8a01a6af75 ("dm thin: prefetch missing metadata pages") Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18md/raid5: preserve STRIPE_PREREAD_ACTIVE in break_stripe_batch_listNeilBrown
[ Upstream commit 550da24f8d62fe81f3c13e3ec27602d6e44d43dc ] break_stripe_batch_list breaks up a batch and copies some flags from the batch head to the members, preserving others. It doesn't preserve or copy STRIPE_PREREAD_ACTIVE. This is not normally a problem as STRIPE_PREREAD_ACTIVE is cleared when a stripe_head is added to a batch, and is not set on stripe_heads already in a batch. However there is no locking to ensure one thread doesn't set the flag after it has just been cleared in another. This does occasionally happen. md/raid5 maintains a count of the number of stripe_heads with STRIPE_PREREAD_ACTIVE set: conf->preread_active_stripes. When break_stripe_batch_list clears STRIPE_PREREAD_ACTIVE inadvertently this could becomes incorrect and will never again return to zero. md/raid5 delays the handling of some stripe_heads until preread_active_stripes becomes zero. So when the above mention race happens, those stripe_heads become blocked and never progress, resulting is write to the array handing. So: change break_stripe_batch_list to preserve STRIPE_PREREAD_ACTIVE in the members of a batch. URL: https://bugzilla.kernel.org/show_bug.cgi?id=108741 URL: https://bugzilla.redhat.com/show_bug.cgi?id=1258153 URL: http://thread.gmane.org/5649C0E9.2030204@zoner.cz Reported-by: Martin Svec <martin.svec@zoner.cz> (and others) Tested-by: Tom Weber <linux@junkyard.4t2.com> Fixes: 1b956f7a8f9a ("md/raid5: be more selective about distributing flags across batch.") Cc: stable@vger.kernel.org (v4.1 and later) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18bcache: fix cache_set_flush() NULL pointer dereference on OOMEric Wheeler
[ Upstream commit f8b11260a445169989d01df75d35af0f56178f95 ] When bch_cache_set_alloc() fails to kzalloc the cache_set, the asyncronous closure handling tries to dereference a cache_set that hadn't yet been allocated inside of cache_set_flush() which is called by __cache_set_unregister() during cleanup. This appears to happen only during an OOM condition on bcache_register. Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18bcache: cleaned up error handling around register_cache()Eric Wheeler
[ Upstream commit 9b299728ed777428b3908ac72ace5f8f84b97789 ] Fix null pointer dereference by changing register_cache() to return an int instead of being void. This allows it to return -ENOMEM or -ENODEV and enables upper layers to handle the OOM case without NULL pointer issues. See this thread: http://thread.gmane.org/gmane.linux.kernel.bcache.devel/3521 Fixes this error: gargamel:/sys/block/md5/bcache# echo /dev/sdh2 > /sys/fs/bcache/register bcache: register_cache() error opening sdh2: cannot allocate memory BUG: unable to handle kernel NULL pointer dereference at 00000000000009b8 IP: [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache] PGD 120dff067 PUD 1119a3067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: veth ip6table_filter ip6_tables (...) CPU: 4 PID: 3371 Comm: kworker/4:3 Not tainted 4.4.2-amd64-i915-volpreempt-20160213bc1 #3 Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013 Workqueue: events cache_set_flush [bcache] task: ffff88020d5dc280 ti: ffff88020b6f8000 task.ti: ffff88020b6f8000 RIP: 0010:[<ffffffffc05a7e8d>] [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache] Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net> Tested-by: Marc MERLIN <marc@merlins.org> Cc: <stable@vger.kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18bcache: fix race of writeback thread starting before complete initializationEric Wheeler
[ Upstream commit 07cc6ef8edc47f8b4fc1e276d31127a0a5863d4d ] The bch_writeback_thread might BUG_ON in read_dirty() if dc->sb==BDEV_STATE_DIRTY and bch_sectors_dirty_init has not yet completed its related initialization. This patch downs the dc->writeback_lock until after initialization is complete, thus preventing bch_writeback_thread from proceeding prematurely. See this thread: http://thread.gmane.org/gmane.linux.kernel.bcache.devel/3453 Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net> Tested-by: Marc MERLIN <marc@merlins.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18RAID5: check_reshape() shouldn't call mddev_suspendShaohua Li
[ Upstream commit 27a353c026a879a1001e5eac4bda75b16262c44a ] check_reshape() is called from raid5d thread. raid5d thread shouldn't call mddev_suspend(), because mddev_suspend() waits for all IO finish but IO is handled in raid5d thread, we could easily deadlock here. This issue is introduced by 738a273 ("md/raid5: fix allocation of 'scribble' array.") Cc: stable@vger.kernel.org (v4.1+) Reported-and-tested-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18md/raid5: Compare apples to apples (or sectors to sectors)Jes Sorensen
[ Upstream commit e7597e69dec59b65c5525db1626b9d34afdfa678 ] 'max_discard_sectors' is in sectors, while 'stripe' is in bytes. This fixes the problem where DISCARD would get disabled on some larger RAID5 configurations (6 or more drives in my testing), while it worked as expected with smaller configurations. Fixes: 620125f2bf8 ("MD: raid5 trim support") Cc: stable@vger.kernel.org v3.7+ Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18dm: fix excessive dm-mq context switchingMike Snitzer
[ Upstream commit 6acfe68bac7e6f16dc312157b1fa6e2368985013 ] Request-based DM's blk-mq support (dm-mq) was reported to be 50% slower than if an underlying null_blk device were used directly. One of the reasons for this drop in performance is that blk_insert_clone_request() was calling blk_mq_insert_request() with @async=true. This forced the use of kblockd_schedule_delayed_work_on() to run the blk-mq hw queues which ushered in ping-ponging between process context (fio in this case) and kblockd's kworker to submit the cloned request. The ftrace function_graph tracer showed: kworker-2013 => fio-12190 fio-12190 => kworker-2013 ... kworker-2013 => fio-12190 fio-12190 => kworker-2013 ... Fixing blk_insert_clone_request()'s blk_mq_insert_request() call to _not_ use kblockd to submit the cloned requests isn't enough to eliminate the observed context switches. In addition to this dm-mq specific blk-core fix, there are 2 DM core fixes to dm-mq that (when paired with the blk-core fix) completely eliminate the observed context switching: 1) don't blk_mq_run_hw_queues in blk-mq request completion Motivated by desire to reduce overhead of dm-mq, punting to kblockd just increases context switches. In my testing against a really fast null_blk device there was no benefit to running blk_mq_run_hw_queues() on completion (and no other blk-mq driver does this). So hopefully this change doesn't induce the need for yet another revert like commit 621739b00e16ca2d ! 2) use blk_mq_complete_request() in dm_complete_request() blk_complete_request() doesn't offer the traditional q->mq_ops vs .request_fn branching pattern that other historic block interfaces do (e.g. blk_get_request). Using blk_mq_complete_request() for blk-mq requests is important for performance. It should be noted that, like blk_complete_request(), blk_mq_complete_request() doesn't natively handle partial completions -- but the request-based DM-multipath target does provide the required partial completion support by dm.c:end_clone_bio() triggering requeueing of the request via dm-mpath.c:multipath_end_io()'s return of DM_ENDIO_REQUEUE. dm-mq fix #2 is _much_ more important than #1 for eliminating the context switches. Before: cpu : usr=15.10%, sys=59.39%, ctx=7905181, majf=0, minf=475 After: cpu : usr=20.60%, sys=79.35%, ctx=2008, majf=0, minf=472 With these changes multithreaded async read IOPs improved from ~950K to ~1350K for this dm-mq stacked on null_blk test-case. The raw read IOPs of the underlying null_blk device for the same workload is ~1950K. Fixes: 7fb4898e0 ("block: add blk-mq support to blk_insert_cloned_request()") Fixes: bfebd1cdb ("dm: add full blk-mq support to request-based DM") Cc: stable@vger.kernel.org # 4.1+ Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-03-07dm: fix dm_rq_target_io leak on faults with .request_fn DM w/ blk-mq pathsMike Snitzer
[ Upstream commit 4328daa2e79ed904a42ce00a9f38b9c36b44b21a ] Using request-based DM mpath configured with the following stacking (.request_fn DM mpath ontop of scsi-mq paths): echo Y > /sys/module/scsi_mod/parameters/use_blk_mq echo N > /sys/module/dm_mod/parameters/use_blk_mq 'struct dm_rq_target_io' would leak if a request is requeued before a blk-mq clone is allocated (or fails to allocate). free_rq_tio() wasn't being called. kmemleak reported: unreferenced object 0xffff8800b90b98c0 (size 112): comm "kworker/7:1H", pid 5692, jiffies 4295056109 (age 78.589s) hex dump (first 32 bytes): 00 d0 5c 2c 03 88 ff ff 40 00 bf 01 00 c9 ff ff ..\,....@....... e0 d9 b1 34 00 88 ff ff 00 00 00 00 00 00 00 00 ...4............ backtrace: [<ffffffff81672b6e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811dbb63>] kmem_cache_alloc+0xc3/0x1e0 [<ffffffff8117eae5>] mempool_alloc_slab+0x15/0x20 [<ffffffff8117ec1e>] mempool_alloc+0x6e/0x170 [<ffffffffa00029ac>] dm_old_prep_fn+0x3c/0x180 [dm_mod] [<ffffffff812fbd78>] blk_peek_request+0x168/0x290 [<ffffffffa0003e62>] dm_request_fn+0xb2/0x1b0 [dm_mod] [<ffffffff812f66e3>] __blk_run_queue+0x33/0x40 [<ffffffff812f9585>] blk_delay_work+0x25/0x40 [<ffffffff81096fff>] process_one_work+0x14f/0x3d0 [<ffffffff81097715>] worker_thread+0x125/0x4b0 [<ffffffff8109ce88>] kthread+0xd8/0xf0 [<ffffffff8167cb8f>] ret_from_fork+0x3f/0x70 [<ffffffffffffffff>] 0xffffffffffffffff crash> struct -o dm_rq_target_io struct dm_rq_target_io { ... } SIZE: 112 Fixes: e5863d9ad7 ("dm: allocate requests in target when stacking on blk-mq devices") Cc: stable@vger.kernel.org # 4.0+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-03dm snapshot: fix hung bios when copy error occursMikulas Patocka
[ Upstream commit 385277bfb57faac44e92497104ba542cdd82d5fe ] When there is an error copying a chunk dm-snapshot can incorrectly hold associated bios indefinitely, resulting in hung IO. The function copy_callback sets pe->error if there was error copying the chunk, and then calls complete_exception. complete_exception calls pending_complete on error, otherwise it calls commit_exception with commit_callback (and commit_callback calls complete_exception). The persistent exception store (dm-snap-persistent.c) assumes that calls to prepare_exception and commit_exception are paired. persistent_prepare_exception increases ps->pending_count and persistent_commit_exception decreases it. If there is a copy error, persistent_prepare_exception is called but persistent_commit_exception is not. This results in the variable ps->pending_count never returning to zero and that causes some pending exceptions (and their associated bios) to be held forever. Fix this by unconditionally calling commit_exception regardless of whether the copy was successful. A new "valid" parameter is added to commit_exception -- when the copy fails this parameter is set to zero so that the chunk that failed to copy (and all following chunks) is not recorded in the snapshot store. Also, remove commit_callback now that it is merely a wrapper around pending_complete. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-01bcache: Change refill_dirty() to always scan entire disk if necessaryKent Overstreet
[ Upstream commit 627ccd20b4ad3ba836472468208e2ac4dfadbf03 ] Previously, it would only scan the entire disk if it was starting from the very start of the disk - i.e. if the previous scan got to the end. This was broken by refill_full_stripes(), which updates last_scanned so that refill_dirty was never triggering the searched_from_start path. But if we change refill_dirty() to always scan the entire disk if necessary, regardless of what last_scanned was, the code gets cleaner and we fix that bug too. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-01bcache: prevent crash on changing writeback_runningStefan Bader
[ Upstream commit 8d16ce540c94c9d366eb36fc91b7154d92d6397b ] Added a safeguard in the shutdown case. At least while not being attached it is also possible to trigger a kernel bug by writing into writeback_running. This change adds the same check before trying to wake up the thread for that case. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-01bcache: allows use of register in udev to avoid "device_busy" error.Gabriel de Perthuis
[ Upstream commit d7076f21629f8f329bca4a44dc408d94670f49e2 ] Allows to use register, not register_quiet in udev to avoid "device_busy" error. The initial patch proposed at https://lkml.org/lkml/2013/8/26/549 by Gabriel de Perthuis <g2p.code@gmail.com> does not unlock the mutex and hangs the kernel. See http://thread.gmane.org/gmane.linux.kernel.bcache.devel/2594 for the discussion. Cc: Denis Bychkov <manover@gmail.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Gabriel de Perthuis <g2p.code@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-01bcache: unregister reboot notifier if bcache fails to unregister deviceZheng Liu
[ Upstream commit 2ecf0cdb2b437402110ab57546e02abfa68a716b ] In bcache_init() function it forgot to unregister reboot notifier if bcache fails to unregister a block device. This commit fixes this. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Tested-by: Joshua Schmid <jschmid@suse.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-01bcache: fix a leak in bch_cached_dev_run()Al Viro
[ Upstream commit 4d4d8573a8451acc9f01cbea24b7e55f04a252fe ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Joshua Schmid <jschmid@suse.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-01bcache: clear BCACHE_DEV_UNLINK_DONE flag when attaching a backing deviceZheng Liu
[ Upstream commit fecaee6f20ee122ad75402c53d8278f9bb142ddc ] This bug can be reproduced by the following script: #!/bin/bash bcache_sysfs="/sys/fs/bcache" function clear_cache() { if [ ! -e $bcache_sysfs ]; then echo "no bcache sysfs" exit fi cset_uuid=$(ls -l $bcache_sysfs|head -n 2|tail -n 1|awk '{print $9}') sudo sh -c "echo $cset_uuid > /sys/block/sdb/sdb1/bcache/detach" sleep 5 sudo sh -c "echo $cset_uuid > /sys/block/sdb/sdb1/bcache/attach" } for ((i=0;i<10;i++)); do clear_cache done The warning messages look like below: [ 275.948611] ------------[ cut here ]------------ [ 275.963840] WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xb8/0xd0() (Tainted: P W --------------- ) [ 275.979253] Hardware name: Tecal RH2285 [ 275.994106] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:09.0/0000:08:00.0/host4/target4:2:1/4:2:1:0/block/sdb/sdb1/bcache/cache' [ 276.024105] Modules linked in: bcache tcp_diag inet_diag ipmi_devintf ipmi_si ipmi_msghandler bonding 8021q garp stp llc ipv6 ext3 jbd loop sg iomemory_vsl(P) bnx2 microcode serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support i7core_edac edac_core shpchp ext4 jbd2 mbcache megaraid_sas pata_acpi ata_generic ata_piix dm_mod [last unloaded: scsi_wait_scan] [ 276.072643] Pid: 2765, comm: sh Tainted: P W --------------- 2.6.32 #1 [ 276.089315] Call Trace: [ 276.105801] [<ffffffff81070fe7>] ? warn_slowpath_common+0x87/0xc0 [ 276.122650] [<ffffffff810710d6>] ? warn_slowpath_fmt+0x46/0x50 [ 276.139361] [<ffffffff81205c08>] ? sysfs_add_one+0xb8/0xd0 [ 276.156012] [<ffffffff8120609b>] ? sysfs_do_create_link+0x12b/0x170 [ 276.172682] [<ffffffff81206113>] ? sysfs_create_link+0x13/0x20 [ 276.189282] [<ffffffffa03bda21>] ? bcache_device_link+0xc1/0x110 [bcache] [ 276.205993] [<ffffffffa03bfa08>] ? bch_cached_dev_attach+0x478/0x4f0 [bcache] [ 276.222794] [<ffffffffa03c4a17>] ? bch_cached_dev_store+0x627/0x780 [bcache] [ 276.239680] [<ffffffff8116783a>] ? alloc_pages_current+0xaa/0x110 [ 276.256594] [<ffffffff81203b15>] ? sysfs_write_file+0xe5/0x170 [ 276.273364] [<ffffffff811887b8>] ? vfs_write+0xb8/0x1a0 [ 276.290133] [<ffffffff811890b1>] ? sys_write+0x51/0x90 [ 276.306368] [<ffffffff8100c072>] ? system_call_fastpath+0x16/0x1b [ 276.322301] ---[ end trace 9f5d4fcdd0c3edfb ]--- [ 276.338241] ------------[ cut here ]------------ [ 276.354109] WARNING: at /home/wenqing.lz/bcache/bcache/super.c:720 bcache_device_link+0xdf/0x110 [bcache]() (Tainted: P W --------------- ) [ 276.386017] Hardware name: Tecal RH2285 [ 276.401430] Couldn't create device <-> cache set symlinks [ 276.401759] Modules linked in: bcache tcp_diag inet_diag ipmi_devintf ipmi_si ipmi_msghandler bonding 8021q garp stp llc ipv6 ext3 jbd loop sg iomemory_vsl(P) bnx2 microcode serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support i7core_edac edac_core shpchp ext4 jbd2 mbcache megaraid_sas pata_acpi ata_generic ata_piix dm_mod [last unloaded: scsi_wait_scan] [ 276.465477] Pid: 2765, comm: sh Tainted: P W --------------- 2.6.32 #1 [ 276.482169] Call Trace: [ 276.498610] [<ffffffff81070fe7>] ? warn_slowpath_common+0x87/0xc0 [ 276.515405] [<ffffffff810710d6>] ? warn_slowpath_fmt+0x46/0x50 [ 276.532059] [<ffffffffa03bda3f>] ? bcache_device_link+0xdf/0x110 [bcache] [ 276.548808] [<ffffffffa03bfa08>] ? bch_cached_dev_attach+0x478/0x4f0 [bcache] [ 276.565569] [<ffffffffa03c4a17>] ? bch_cached_dev_store+0x627/0x780 [bcache] [ 276.582418] [<ffffffff8116783a>] ? alloc_pages_current+0xaa/0x110 [ 276.599341] [<ffffffff81203b15>] ? sysfs_write_file+0xe5/0x170 [ 276.616142] [<ffffffff811887b8>] ? vfs_write+0xb8/0x1a0 [ 276.632607] [<ffffffff811890b1>] ? sys_write+0x51/0x90 [ 276.648671] [<ffffffff8100c072>] ? system_call_fastpath+0x16/0x1b [ 276.664756] ---[ end trace 9f5d4fcdd0c3edfc ]--- We forget to clear BCACHE_DEV_UNLINK_DONE flag in bcache_device_attach() function when we attach a backing device first time. After detaching this backing device, this flag will be true and sysfs_remove_link() isn't called in bcache_device_unlink(). Then when we attach this backing device again, sysfs_create_link() will return EEXIST error in bcache_device_link(). So the fix is trival and we clear this flag in bcache_device_link(). Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Tested-by: Joshua Schmid <jschmid@suse.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-01bcache: Add a cond_resched() call to gcKent Overstreet
[ Upstream commit c5f1e5adf956e3ba82d204c7c141a75da9fa449a ] Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-01bcache: fix a livelock when we cause a huge number of cache missesZheng Liu
[ Upstream commit 2ef9ccbfcb90cf84bdba320a571b18b05c41101b ] Subject : [PATCH v2] bcache: fix a livelock in btree lock Date : Wed, 25 Feb 2015 20:32:09 +0800 (02/25/2015 04:32:09 AM) This commit tries to fix a livelock in bcache. This livelock might happen when we causes a huge number of cache misses simultaneously. When we get a cache miss, bcache will execute the following path. ->cached_dev_make_request() ->cached_dev_read() ->cached_lookup() ->bch->btree_map_keys() ->btree_root() <------------------------ ->bch_btree_map_keys_recurse() | ->cache_lookup_fn() | ->cached_dev_cache_miss() | ->bch_btree_insert_check_key() -| [If btree->seq is not equal to seq + 1, we should return EINTR and traverse btree again.] In bch_btree_insert_check_key() function we first need to check upgrade flag (op->lock == -1), and when this flag is true we need to release read btree->lock and try to take write btree->lock. During taking and releasing this write lock, btree->seq will be monotone increased in order to prevent other threads modify this in cache miss (see btree.h:74). But if there are some cache misses caused by some requested, we could meet a livelock because btree->seq is always changed by others. Thus no one can make progress. This commit will try to take write btree->lock if it encounters a race when we traverse btree. Although it sacrifice the scalability but we can ensure that only one can modify the btree. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Tested-by: Joshua Schmid <jschmid@suse.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Joshua Schmid <jschmid@suse.com> Cc: Zhu Yanhai <zhu.yanhai@gmail.com> Cc: Kent Overstreet <kmo@daterainc.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-01dm thin: fix race condition when destroying thin pool workqueueNikolay Borisov
[ Upstream commit 18d03e8c25f173f4107a40d0b8c24defb6ed69f3 ] When a thin pool is being destroyed delayed work items are cancelled using cancel_delayed_work(), which doesn't guarantee that on return the delayed item isn't running. This can cause the work item to requeue itself on an already destroyed workqueue. Fix this by using cancel_delayed_work_sync() which guarantees that on return the work item is not running anymore. Fixes: 905e51b39a555 ("dm thin: commit outstanding data every second") Fixes: 85ad643b7e7e5 ("dm thin: add timeout to stop out-of-data-space mode holding IO forever") Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-11-09Revert "md: allow a partially recovered device to be hot-added to an array."NeilBrown
commit d01552a76d71f9879af448e9142389ee9be6e95b upstream. This reverts commit 7eb418851f3278de67126ea0c427641ab4792c57. This commit is poorly justified, I can find not discusison in email, and it clearly causes a problem. If a device which is being recovered fails and is subsequently re-added to an array, there could easily have been changes to the array *before* the point where the recovery was up to. So the recovery must start again from the beginning. If a spare is being recovered and fails, then when it is re-added we really should do a bitmap-based recovery up to the recovery-offset, and then a full recovery from there. Before this reversion, we only did the "full recovery from there" which is not corect. After this reversion with will do a full recovery from the start, which is safer but not ideal. It will be left to a future patch to arrange the two different styles of recovery. Reported-and-tested-by: Nate Dailey <nate.dailey@stratus.com> Signed-off-by: NeilBrown <neilb@suse.com> Fixes: 7eb418851f32 ("md: allow a partially recovered device to be hot-added to an array.") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-09md/raid5: fix locking in handle_stripe_clean_event()Roman Gushchin
commit b8a9d66d043ffac116100775a469f05f5158c16f upstream. After commit 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()") __find_stripe() is called under conf->hash_locks + hash. But handle_stripe_clean_event() calls remove_hash() under conf->device_lock. Under some cirscumstances the hash chain can be circuited, and we get an infinite loop with disabled interrupts and locked hash lock in __find_stripe(). This leads to hard lockup on multiple CPUs and following system crash. I was able to reproduce this behavior on raid6 over 6 ssd disks. The devices_handle_discard_safely option should be set to enable trim support. The following script was used: for i in `seq 1 32`; do dd if=/dev/zero of=large$i bs=10M count=100 & done neilb: original was against a 3.x kernel. I forward-ported to 4.3-rc. This verison is suitable for any kernel since Commit: 59fc630b8b5f ("RAID5: batch adjacent full stripe write") (v4.1+). I'll post a version for earlier kernels to stable. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Fixes: 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()") Signed-off-by: NeilBrown <neilb@suse.com> Cc: Shaohua Li <shli@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-09md/raid10: submit_bio_wait() returns 0 on successJes Sorensen
commit 681ab4696062f5aa939c9e04d058732306a97176 upstream. This was introduced with 9e882242c6193ae6f416f2d8d8db0d9126bd996b which changed the return value of submit_bio_wait() to return != 0 on error, but didn't update the caller accordingly. Fixes: 9e882242c6 ("block: Add submit_bio_wait(), remove from md") Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-09md/raid1: submit_bio_wait() returns 0 on successJes Sorensen
commit 203d27b0226a05202438ddb39ef0ef1acb14a759 upstream. This was introduced with 9e882242c6193ae6f416f2d8d8db0d9126bd996b which changed the return value of submit_bio_wait() to return != 0 on error, but didn't update the caller accordingly. Fixes: 9e882242c6 ("block: Add submit_bio_wait(), remove from md") Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-09dm btree: fix leak of bufio-backed block in btree_split_beneath error pathMike Snitzer
commit 4dcb8b57df3593dcb20481d9d6cf79d1dc1534be upstream. btree_split_beneath()'s error path had an outstanding FIXME that speaks directly to the potential for _not_ cleaning up a previously allocated bufio-backed block. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <thornber@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-09dm btree remove: fix a bug when rebalancing nodes after removalJoe Thornber
commit 2871c69e025e8bc507651d5a9cf81a8a7da9d24b upstream. Commit 4c7e309340ff ("dm btree remove: fix bug in redistribute3") wasn't a complete fix for redistribute3(). The redistribute3 function takes 3 btree nodes and shares out the entries evenly between them. If the three nodes in total contained (MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in the center. Fix this issue by being more careful about calculating the target number of entries for the left and right nodes. Unit tested in userspace using this program: https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.c Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-27dm thin: fix missing pool reference count decrement in pool_ctr error pathMike Snitzer
commit ba30670f4d5292c4e7f7980bbd5071f7c4794cdd upstream. Fixes: ac8c3f3df ("dm thin: generate event when metadata threshold passed") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22dm cache: fix NULL pointer when switching from cleaner policyJoe Thornber
commit 2bffa1503c5c06192eb1459180fac4416575a966 upstream. The cleaner policy doesn't make use of the per cache block hint space in the metadata (unlike the other policies). When switching from the cleaner policy to mq or smq a NULL pointer crash (in dm_tm_new_block) was observed. The crash was caused by bugs in dm-cache-metadata.c when trying to skip creation of the hint btree. The minimal fix is to change hint size for the cleaner policy to 4 bytes (only hint size supported). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22dm: fix AB-BA deadlock in __dm_destroy()Junichi Nomura
commit 2a708cff93f1845b9239bc7d6310aef54e716c6a upstream. __dm_destroy() takes io_barrier SRCU lock (dm_get_live_table) and suspend_lock in reverse order. Doing so can cause AB-BA deadlock: __dm_destroy dm_swap_table --------------------------------------------------- mutex_lock(suspend_lock) dm_get_live_table() srcu_read_lock(io_barrier) dm_sync_table() synchronize_srcu(io_barrier) .. waiting for dm_put_live_table() mutex_lock(suspend_lock) .. waiting for suspend_lock Fix this by taking the locks in proper order. Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Fixes: ab7c7bb6f4ab ("dm: hold suspend_lock while suspending device during device deletion") Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22md/bitmap: don't pass -1 to bitmap_storage_alloc.NeilBrown
commit da6fb7a9e5bd6f04f7e15070f630bdf1ea502841 upstream. Passing -1 to bitmap_storage_alloc() causes page->index to be set to -1, which is quite problematic. So only pass ->cluster_slot if mddev_is_clustered(). Fixes: b97e92574c0b ("Use separate bitmaps for each nodes in the cluster") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2026-08-04 19:59:47 +0000