summaryrefslogtreecommitdiff
path: root/drivers/media/video/v4l2-event.c
AgeCommit message (Collapse)Author
2011-11-12Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] v4l2-ctrl: Send change events to all fh for auto cluster slave controls [media] v4l2-event: Don't set sev->fh to NULL on unsubscribe [media] v4l2-event: Remove pending events from fh event queue when unsubscribing [media] v4l2-event: Deny subscribing with a type of V4L2_EVENT_ALL [media] MAINTAINERS: add a maintainer for s5p-mfc driver [media] v4l: s5p-mfc: fix reported capabilities [media] media: vb2: reset queued list on REQBUFS(0) call [media] media: vb2: set buffer length correctly for all buffer types [media] media: vb2: add a check for uninitialized buffer [media] mxl111sf: fix build warning [media] mxl111sf: remove pointless if condition in mxl111sf_config_spi [media] mxl111sf: check for errors after mxl111sf_write_reg in mxl111sf_idac_config [media] mxl111sf: fix return value of mxl111sf_idac_config [media] uvcvideo: GET_RES should only be checked for BITMAP type menu controls
2011-11-08[media] v4l2-event: Don't set sev->fh to NULL on unsubscribeHans de Goede
Setting sev->fh to NULL causes problems for the del op added in the next patch of this series, since this op needs a way to get to its own data structures, and typically this will be done by using container_of on an embedded v4l2_fh struct. The reason the original code is setting sev->fh to NULL is to signal to users of the event framework that the unsubscription has happened, but since their is no shared lock between the event framework and users of it, this is inherently racy, and it also turns out to be unnecessary as long as both the event framework and the user of the framework do their own locking properly and the user guarantees that it holds no references to the subcribed_event structure after its del operation has been called. This is best explained by looking at the only code currently checking for sev->fh being set to NULL on unsubscribe, which is the v4l2-ctrls.c send_event function. Here is the relevant code from v4l2-ctrls: send_event(): if (sev->fh && (sev->fh != fh || (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK))) v4l2_event_queue_fh(sev->fh, &ev); Now lets say that v4l2_event_unsubscribe and v4l2-ctrls: send_event() race on the same sev, then the following could happens: 1) send_event checks sev->fh, finds it is not NULL <thread switch> 2) v4l2_event_unsubscribe sets sev->fh NULL 3) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks as the thread calling send_event holds the ctrl_lock <thread switch> 4) send_event calls v4l2_event_queue_fh(sev->fh, &ev) which not is equivalent to calling: v4l2_event_queue_fh(NULL, &ev) 5) oops, NULL pointer deref. Now again without setting sev->fh to NULL in v4l2_event_unsubscribe and without the (now senseless since always true) sev->fh != NULL check in 1) send_event is about to call v4l2_event_queue_fh(sev->fh, &ev) <thread switch> 2) v4l2_event_unsubscribe removes sev->list from the fh->subscribed list <thread switch> 3) send_event calls v4l2_event_queue_fh(sev->fh, &ev) 4) v4l2_event_queue_fh blocks on the fh_lock spinlock <thread switch> 5) v4l2_event_unsubscribe unlocks the fh_lock spinlock 6) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks as the thread calling send_event holds the ctrl_lock <thread switch> 8) v4l2_event_queue_fh takes the fh_lock 7) v4l2_event_queue_fh calls v4l2_event_subscribed, does not find it since sev->list has been removed from fh->subscribed already -> does nothing 9) v4l2_event_queue_fh releases the fh_lock 10) the caller of send_event releases the ctrl lock (mutex) <thread switch> 11) v4l2_ctrls del_event takes the ctrl lock 12) v4l2_ctrls del_event removes sev->node from the ev_subs list 13) v4l2_ctrls del_event releases the ctrl lock 14) v4l2_event_unsubscribe frees the sev, to which no references are being held anymore Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08[media] v4l2-event: Remove pending events from fh event queue when unsubscribingHans de Goede
The kev pointers inside the pending events queue (the available queue) of the fh point to data inside the sev, unsubscribing frees the sev, thus making these pointers point to freed memory! This patch fixes these dangling pointers in the available queue by removing all matching pending events on unsubscription. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-08[media] v4l2-event: Deny subscribing with a type of V4L2_EVENT_ALLHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-31drivers/media: Add export.h for EXPORT_SYMBOL/THIS_MODULE as requiredPaul Gortmaker
These two macros were in module.h but now module.h is no longer sprayed across every source file imaginable, so the users need to expicitly call out their use of them. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-27[media] v4l2-ctrls/v4l2-events: small coding style cleanupsHans Verkuil
Thanks to Laurent Pinchart <laurent.pinchart@ideasonboard.com>. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-event: add optional merge and replace callbacksHans Verkuil
When the event queue for a subscribed event is full, then the oldest event is dropped. It would be nice if the contents of that oldest event could be merged with the next-oldest. That way no information is lost, only intermediate steps are lost. This patch adds optional replace() (called when only one kevent was allocated) and merge() (called when more than one kevent was allocated) callbacks that will be called to do this job. These two callbacks are implemented for the V4L2_EVENT_CTRL event. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-event/ctrls/fh: allocate events per fh and per type instead of ↵Hans Verkuil
just per-fh The driver had to decide how many events to allocate when the v4l2_fh struct was created. It was possible to add more events afterwards, but there was no way to ensure that you wouldn't miss important events if the event queue would fill up for that filehandle. In addition, once there were no more free events, any new events were simply dropped on the floor. For the control event in particular this made life very difficult since control status/value changes could just be missed if the number of allocated events and the speed at which the application read events was too low to keep up with the number of generated events. The application would have no idea what the latest state was for a control since it could have missed the latest control change. So this patch makes some major changes in how events are allocated. Instead of allocating events per-filehandle they are now allocated when subscribing an event. So for that particular event type N events (determined by the driver) are allocated. Those events are reserved for that particular event type. This ensures that you will not miss events for a particular type altogether. In addition, if there are N events in use and a new event is raised, then the oldest event is dropped and the new one is added. So the latest event is always available. This can be further improved by adding the ability to merge the state of two events together, ensuring that no data is lost at all. This will be added in the next patch. This also makes it possible to allow the user to determine the number of events that will be allocated. This is not implemented at the moment, but would be trivial. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-ctrls/event: remove struct v4l2_ctrl_fh, instead use ↵Hans Verkuil
v4l2_subscribed_event The v4l2_ctrl_fh struct connected v4l2_ctrl with v4l2_fh so the control would know which filehandles subscribed to it. However, it is much easier to use struct v4l2_subscribed_event directly for that and get rid of that intermediate struct. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-events/fh: merge v4l2_events into v4l2_fhHans Verkuil
Drivers that supported events used to be rare, but now that controls can also raise events this will become much more common since almost all drivers have controls. This means that keeping struct v4l2_events as a separate struct make no more sense. Merging it into struct v4l2_fh simplifies things substantially as it is now an integral part of the filehandle struct. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] v4l2-ctrls: add control eventsHans Verkuil
Whenever a control changes value or state an event is sent to anyone that subscribed to it. This functionality is useful for control panels but also for applications that need to wait for (usually status) controls to change value. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: v4l2: add core serialization lockHans Verkuil
Drivers can optionally set a pointer to a mutex in struct video_device. The core will use that to lock before calling open, read, write, unlocked_ioctl, poll, mmap or release. Updated the documentation as well and ensure that v4l2-event knows about the lock: it will unlock it before doing a blocking wait on an event and relock it afterwards. Ensure that the 'video_is_registered' check is done when the lock is held: a typical disconnect will take the lock as well before unregistering the device nodes, so to prevent race conditions the video_is_registered check should also be done with the lock held. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: event: Export the v4l2_event_init and v4l2_event_dequeue functionsLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: V4L: Events: Replace bad WARN_ON() with assert_spin_locked()Sakari Ailus
spin_is_locked() always returns zero when spinlock debugging is disabled on a single CPU machine. Replace WARN_ON() with assert_spin_locked(). Thanks to Laurent Pinchart for spotting this! Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: V4L: Events: Add backendSakari Ailus
Add event handling backend to V4L2. The backend handles event subscription and delivery to file handles. Event subscriptions are based on file handle. Events may be delivered to all subscribed file handles on a device independent of where they originate from. Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>