summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2015-11-20various: fix pci_set_dma_mask return value checkingChristoph Hellwig
pci_set_dma_mask returns a negative errno value, not a bool like pci_dma_supported. This of course was just a giant test for attention :) Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jongman Heo <jongman.heo@samsung.com> Tested-by: Jongman Heo <jongman.heo@samsung.com> [pcnet32] Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10netup_unidvb: use pci_set_dma_mask insted of pci_dma_supportedChristoph Hellwig
This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Sergey Kozlov <serjk@netup.ru> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10cx23885: use pci_set_dma_mask insted of pci_dma_supportedChristoph Hellwig
This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Pawel Osciak <pawel@osciak.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10cx25821: use pci_set_dma_mask insted of pci_dma_supportedChristoph Hellwig
This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10cx88: use pci_set_dma_mask insted of pci_dma_supportedChristoph Hellwig
This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10saa7134: use pci_set_dma_mask insted of pci_dma_supportedChristoph Hellwig
This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10saa7164: use pci_set_dma_mask insted of pci_dma_supportedChristoph Hellwig
This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-10tw68-core: use pci_set_dma_mask insted of pci_dma_supportedChristoph Hellwig
This ensures the dma mask that is supported by the driver is recorded in the device structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Pawel Osciak <pawel@osciak.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09remove abs64()Andrew Morton
Switch everything to the new and more capable implementation of abs(). Mainly to give the new abs() a bit of a workout. Cc: Michal Nazarewicz <mina86@mina86.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman
sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05Merge tag 'spi-v4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-11-05Merge tag 'media/v4.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "Media updates, including: - Lots of improvements at the kABI documentation - Split of Videobuf2 into a common part and a V4L2 specific one - Split of the VB2 tracing events into a separate header file - s5p-mfc got support for Exynos 5433 - v4l2 fixes for 64-bits alignment when running 32 bits userspace on ARM - Added support for SDR radio transmitter at core, vivid and hackrf drivers - Some y2038 fixups - Some improvements at V4L2 colorspace support - saa7164 converted to use the V4L2 core control framework - several new boards additions, cleanups and fixups PS: There are two patches for scripts/kernel-doc that are needed by the documentation patches on Media. Jon is OK on merging those via my tree" * tag 'media/v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (146 commits) [media] c8sectpfe: Remove select on CONFIG_FW_LOADER_USER_HELPER_FALLBACK [media] DocBook media: update copyright/version numbers [media] ivtv: Convert to get_user_pages_unlocked() [media] media/v4l2-ctrls: fix setting autocluster to manual with VIDIOC_S_CTRL [media] DocBook media: Fix a typo in encoder cmd [media] DocBook: add SDR specific info to G_MODULATOR / S_MODULATOR [media] DocBook: add SDR specific info to G_TUNER / S_TUNER [media] hackrf: do not set human readable name for formats [media] hackrf: add support for transmitter [media] hackrf: switch to single function which configures everything [media] hackrf: add control for RF amplifier [media] DocBook: add modulator type field [media] v4l: add type field to v4l2_modulator struct [media] DocBook: document SDR transmitter [media] v4l2: add support for SDR transmitter [media] DocBook: document tuner RF gain control [media] v4l2: add RF gain control [media] v4l2: rename V4L2_TUNER_ADC to V4L2_TUNER_SDR [media] media/vivid-osd: fix info leak in ioctl [media] media: videobuf2: Move v4l2-specific stuff to videobuf2-v4l2 ...
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-22[media] m88ds3103: use own reg update_bits() implementationAntti Palosaari
Device stopped to tuning some channels after regmap conversion. Reason is that regmap_update_bits() works a bit differently for partially volatile registers than old homemade routine. Return back to old routine in order to fix issue. Fixes: 478932b16052f5ded74685d096ae920cd17d6424 Cc: <stable@kernel.org> # 4.2+ Reported-by: Mark Clarkstone <hello@markclarkstone.co.uk> Tested-by: Mark Clarkstone <hello@markclarkstone.co.uk> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-22[media] rtl28xxu: fix control message flawsAntti Palosaari
Add lock to prevent concurrent access for control message as control message function uses shared buffer. Without the lock there may be remote control polling which messes the buffer causing IO errors. Increase buffer size and add check for maximum supported message length. Link: https://bugzilla.kernel.org/show_bug.cgi?id=103391 Fixes: c56222a6b25c ("[media] rtl28xxu: move usb buffers to state") Cc: <stable@vger.kernel.org> # 4.0+ Signed-off-by: Antti Palosaari <crope@iki.fi>
2015-10-22[media] v4l2-flash-led-class: Add missing VIDEO_V4L2 Kconfig dependencyJacek Anaszewski
Fixes the following randconfig problem: drivers/built-in.o: In function `v4l2_flash_release': (.text+0x12204f): undefined reference to `v4l2_async_unregister_subdev' drivers/built-in.o: In function `v4l2_flash_release': (.text+0x122057): undefined reference to `v4l2_ctrl_handler_free' drivers/built-in.o: In function `v4l2_flash_close': v4l2-flash-led-class.c:(.text+0x12208f): undefined reference to `v4l2_fh_is_singular' v4l2-flash-led-class.c:(.text+0x1220c8): undefined reference to `__v4l2_ctrl_s_ctrl' drivers/built-in.o: In function `v4l2_flash_open': v4l2-flash-led-class.c:(.text+0x12227f): undefined reference to `v4l2_fh_is_singular' drivers/built-in.o: In function `v4l2_flash_init_controls': v4l2-flash-led-class.c:(.text+0x12274e): undefined reference to `v4l2_ctrl_handler_init_class' v4l2-flash-led-class.c:(.text+0x122797): undefined reference to `v4l2_ctrl_new_std_menu' v4l2-flash-led-class.c:(.text+0x1227e0): undefined reference to `v4l2_ctrl_new_std' v4l2-flash-led-class.c:(.text+0x122826): undefined reference to `v4l2_ctrl_handler_setup' v4l2-flash-led-class.c:(.text+0x122839): undefined reference to `v4l2_ctrl_handler_free' drivers/built-in.o: In function `v4l2_flash_init': (.text+0x1228e2): undefined reference to `v4l2_subdev_init' drivers/built-in.o: In function `v4l2_flash_init': (.text+0x12293b): undefined reference to `v4l2_async_register_subdev' drivers/built-in.o: In function `v4l2_flash_init': (.text+0x122949): undefined reference to `v4l2_ctrl_handler_free' drivers/built-in.o:(.rodata+0x20ef8): undefined reference to `v4l2_subdev_queryctrl' drivers/built-in.o:(.rodata+0x20f10): undefined reference to `v4l2_subdev_querymenu' Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Hans Verkuil <hans.verkuil@cisco.com>
2015-10-22[media] netup_unidvb: fix potential crash when spi is NULLAbylay Ospan
Signed-off-by: Abylay Ospan <aospan@netup.ru> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-22[media] si2168: Bounds check firmwareLaura Abbott
When reading the firmware and sending commands, the length must be bounds checked to avoid overrunning the size of the command buffer and smashing the stack if the firmware is not in the expected format: si2168 11-0064: found a 'Silicon Labs Si2168-B40' si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' si2168 11-0064: firmware download failed -95 Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa085708f Add the proper check. Cc: stable@kernel.org Reported-by: Stuart Auchterlonie <sauchter@redhat.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-22[media] si2157: Bounds check firmwareLaura Abbott
When reading the firmware and sending commands, the length must be bounds checked to avoid overrunning the size of the command buffer and smashing the stack if the firmware is not in the expected format. Add the proper check. Cc: stable@kernel.org Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-22[media] ir-hix5hd2: drop the use of IRQF_NO_SUSPENDSudeep Holla
This driver doesn't claim the IR transmitter to be wakeup source. It even disables the clock and the IR during suspend-resume cycle. This patch removes yet another misuse of IRQF_NO_SUSPEND. Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Guoxiong Yan <yanguoxiong@huawei.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-22[media] c8sectpfe: fix return of garbageSudip Mukherjee
The variable err was never initialized, that means we had been checking a garbage value in the for loop. Moreover if the segment is not outside the firmware file then also we have been returning the garbage. Initialize it to 0 so that on success we return the value and no need to check in the for loop also as it is initially 0 and whenever that value changes we have done a break from the loop. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-22[media] c8sectpfe: fix ininitialized error return on firmware load failureColin Ian King
static analysis with cppcheck detected the following error: [drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:1210]: (error) Uninitialized variable: ret ret is never initialised, so garbage is being returned. Instead return the error return from the call of request_firmware_nowait Signed-off-by: Colin Ian King <colin.king@canonical.com>
2015-10-22[media] lnbh25: Fix lnbh25_attach() function return typeJavier Martinez Canillas
If CONFIG_DVB_LNBH25 is disabled, a stub static inline function is defined that just prints a warning about the driver being disabled but the function return type was wrong which caused a build error. Fixes: e025273b86fb ("[media] lnbh25: LNBH25 SEC controller driver") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-22[media] horus3a: Fix horus3a_attach() function parametersJavier Martinez Canillas
If CONFIG_DVB_HORUS3A is disabled a stub static inline function is defined that just prints a warning about the driver being disabled but the function parameters were wrong which caused a build error. Fixes: a5d32b358254f ("[media] horus3a: Sony Horus3A DVB-S/S2 tuner driver") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-10-20[media] c8sectpfe: Remove select on CONFIG_FW_LOADER_USER_HELPER_FALLBACKTakashi Iwai
c8sectpfe driver selects CONFIG_FW_LOADER_USER_HELPER_FALLBACK by some reason, but this option is known to be harmful, leading to minutes of stalls at boot time. The option was intended for only compatibility for an old exotic system that mandates the udev interaction, and not a thing a driver selects by itself. Let's remove it. Fixes: 850a3f7d5911 ('[media] c8sectpfe: Add Kconfig and Makefile for the driver') Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-20[media] ivtv: Convert to get_user_pages_unlocked()Jan Kara
Convert ivtv_yuv_prep_user_dma() to use get_user_pages_unlocked() so that we don't unnecessarily leak knowledge about mm locking into drivers code. CC: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] media/v4l2-ctrls: fix setting autocluster to manual with VIDIOC_S_CTRLAntonio Ospite
Since commit 5d0360a4f027576e5419d4a7c711c9ca0f1be8ca it's not possible anymore to set auto clusters from auto to manual using VIDIOC_S_CTRL. For example, setting autogain to manual with gspca/ov534 driver and this sequence of commands does not work: v4l2-ctl --set-ctrl=gain_automatic=1 v4l2-ctl --list-ctrls | grep gain_automatic # The following does not work v4l2-ctl --set-ctrl=gain_automatic=0 v4l2-ctl --list-ctrls | grep gain_automatic Changing the value using VIDIOC_S_EXT_CTRLS (like qv4l2 does) works fine. The apparent cause by looking at the changes in 5d0360a and comparing with the code path for VIDIOC_S_EXT_CTRLS seems to be that the code in v4l2-ctrls.c::set_ctrl() is not calling user_to_new() anymore after calling update_from_auto_cluster(master). However the root cause of the problem is that calling update_from_auto_cluster(master) overrides also the _master_ control state calling cur_to_new() while it was supposed to only update the volatile controls. Calling user_to_new() after update_from_auto_cluster(master) was just masking the original bug by restoring the correct new value of the master control before making the changes permanent. Fix the original bug by making update_from_auto_cluster() not override the new master control value. Signed-off-by: Antonio Ospite <ao2@ao2.it> Cc: <stable@vger.kernel.org> # for v3.17 and up Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] hackrf: do not set human readable name for formatsAntti Palosaari
Format names are set by core nowadays. Remove name from driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] hackrf: add support for transmitterAntti Palosaari
HackRF SDR device has both receiver and transmitter. There is limitation that receiver and transmitter cannot be used at the same time (half-duplex operation). That patch implements transmitter support to existing receiver only driver. Signed-off-by: Antti Palosaari <crope@iki.fi> [hans.verkuil@cisco.com: fix krobot unused variable warning] [hans.verkuil@cisco.com: add back s_modulator from PATCHv4] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] hackrf: switch to single function which configures everythingAntti Palosaari
Implement single funtion, hackrf_set_params(), which handles all needed settings. Controls and other IOCTLs are just wrappers to that function. That way we can get easily better control what we could do on different device states - sleeping, receiving, transmitting. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] hackrf: add control for RF amplifierAntti Palosaari
There is Avago MGA-81563 amplifier just right after antenna connector. It could be turned on/off and its gain is around 12dB. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] v4l: add type field to v4l2_modulator structAntti Palosaari
Add type field to that struct like it counterpart v4l2_tuner already has. We need type field to distinguish different tuner types from each others for transmitter too. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] v4l2: add support for SDR transmitterAntti Palosaari
New IOCTL ops: vidioc_enum_fmt_sdr_out vidioc_g_fmt_sdr_out vidioc_s_fmt_sdr_out vidioc_try_fmt_sdr_out New vb2 buffertype: V4L2_BUF_TYPE_SDR_OUTPUT New v4l2 capability: V4L2_CAP_SDR_OUTPUT Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] v4l2: add RF gain controlAntti Palosaari
Add new RF tuner gain control named RF Gain. That is aimed for first amplifier chip right after antenna connector. There is existing LNA Gain control, which is quite same, but it is aimed for cases amplifier is integrated to tuner chip. Some designs have both, as almost all recent tuner silicons has integrated LNA/RF amplifier in any case. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] v4l2: rename V4L2_TUNER_ADC to V4L2_TUNER_SDRAntti Palosaari
SDR receiver has ADC (Analog-to-Digital Converter) and SDR transmitter has DAC (Digital-to-Analog Converter). Originally I though it could be good idea to have own type for receiver and transmitter, but now I feel one common type for SDR is enough. So lets rename it. Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: this was added in 4.4, so update 4.2 to 4.4] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] media/vivid-osd: fix info leak in ioctlSalva Peiró
The vivid_fb_ioctl() code fails to initialize the 16 _reserved bytes of struct fb_vblank after the ->hcount member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Salva Peiró <speirofr@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] media: videobuf2: Move v4l2-specific stuff to videobuf2-v4l2Junghak Sung
Move v4l2-specific stuff from videobu2-core to videobuf2-v4l2 without doing any functional changes. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] media: videobuf2: Prepare to divide videobuf2Junghak Sung
Prepare to divide videobuf2 - Separate vb2 trace events from v4l2 trace event. - Make wrapper functions that will move to v4l2-side. - Make vb2_core_* functions that will remain in core-side. - Add a callback function table for buffer operation which makes vb2-core to be able to invoke a v4l2-side functions. - Rename internal functions as vb2_*. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] media: videobuf2: Replace v4l2-specific data with vb2 dataJunghak Sung
Simple changes that replace v4l2-specific data with vb2 data in videobuf2-core. enum v4l2_buf_type --> int enum v4l2_memory --> enum vb2_memory VIDEO_MAX_FRAME --> VB2_MAX_FRAME VIDEO_MAX_PLANES --> VB2_MAX_PLANES struct v4l2_fh *owner --> void *owner V4L2_TYPE_IS_MULTIPLANAR() --> is_multiplanar V4L2_TYPE_IS_OUTPUT() --> is_output Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] media: videobuf2: Change queue_setup argumentJunghak Sung
Replace struct v4l2_format * with void * to make queue_setup() for common use. And then, modify all device drivers related with this change. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix missing const in fimc-lite.c] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] s5p-mfc: use MFC_BUF_FLAG_EOS to identify last buffers in decoder ↵Andrzej Hajda
capture queue MFC driver never delivered EOS event to apps feeding constantly its capture buffer with fresh buffers. The patch fixes it by marking last buffers returned by MFC with MFC_BUF_FLAG_EOS flag and firing EOS event on de-queuing such buffers. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] s5p-mfc: end-of-stream handling for newer encodersAndrzej Hajda
MFC encoder supports end-of-stream handling for encoder in version 5 of hardware. This patch adds it also for newer version. It was successfully tested on MFC-v8. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] s5p-mfc: fix spelling errorsIngi Kim
This patch fixes spelling errors in mfc encoder. inavild -> invaild Signed-off-by: Ingi Kim <ingi2.kim@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] media: vb2 dma-sg: Fully cache synchronise buffers in prepare and finishTiffany Lin
In videobuf2 dma-sg memory types the prepare and finish ops, instead of passing the number of entries in the original scatterlist as the "nents" parameter to dma_sync_sg_for_device() and dma_sync_sg_for_cpu(), the value returned by dma_map_sg() was used. Albeit this has been suggested in comments of some implementations (which have since been corrected), this is wrong. Fixes: d790b7eda953 ("vb2-dma-sg: move dma_(un)map_sg here") Cc: stable@vger.kernel.org # for v3.19 and up Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] media: vb2 dma-contig: Fully cache synchronise buffers in prepare ↵Tiffany Lin
and finish In videobuf2 dma-contig memory type the prepare and finish ops, instead of passing the number of entries in the original scatterlist as the "nents" parameter to dma_sync_sg_for_device() and dma_sync_sg_for_cpu(), the value returned by dma_map_sg() was used. Albeit this has been suggested in comments of some implementations (which have since been corrected), this is wrong. Fixes: 199d101efdba ("v4l: vb2-dma-contig: add prepare/finish to dma-contig allocator") Cc: stable@vger.kernel.org # for v3.8 and up Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-20[media] smiapp: Export OF module alias informationJavier Martinez Canillas
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the driver was matched using the I2C id_table or the of_match_table. So technically there's no need for a driver to export the OF table since currently it's not used. In fact, the I2C device ID table is mandatory for I2C drivers since a i2c_device_id is passed to the driver's probe function even if the I2C core used the OF table to match the driver. And since the I2C core uses different tables, OF-only drivers needs to have duplicated data that has to be kept in sync and also the dev node compatible manufacturer prefix is stripped when reporting the MODALIAS. To avoid the above, the I2C core behavior may be changed in the future to not require an I2C device table for OF-only drivers and report the OF module alias. So, it's better to also export the OF table to prevent breaking module autoloading if that happens. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-10[media] demux.h: Convert MPEG-TS demux caps to an enumMauro Carvalho Chehab
While we can't document #defines, documenting enums are well supported by kernel-doc. So, convert the bitmap defines into an enum. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-10[media] demux.h: Convert TS filter type into enumMauro Carvalho Chehab
The usage of #define at the kABI is fine, but it doesn't allow adding a proper description. As those defines deserve a proper documentation, let's convert them into an enum and document them at device-drivers DocBook. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-10[media] DocBook: document typedef dmx_section_cb at demux.hMauro Carvalho Chehab
The dvb/kdapi.tmpl has already an extensive documentation about this callback. Now that we've added function typedefs at kernel-doc, add such documentation at demux.h, for it to appear at device-drivers DocBook. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>