summaryrefslogtreecommitdiff
path: root/drivers/mfd/Makefile
AgeCommit message (Collapse)Author
2015-03-12mfd: Add support for Skyworks SKY81452 driverGyungoh Yoo
Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-12mfd: intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD DriverRaymond Tan
In Quark X1000, there's a single PCI device that provides both an I2C controller and a GPIO controller. This MFD driver will split the 2 devices for their respective drivers. This patch is based on Josef Ahmad's initial work for Quark enabling. Acked-by: Michael Turquette <mturquette@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Weike Chen <alvin.chen@intel.com> Signed-off-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-04mfd: max77843: Add max77843 MFD driver core driverJaewon Kim
This patch adds MAX77843 core/irq driver to support PMIC, MUIC(Micro USB Interface Controller), Charger, Fuel Gauge, LED and Haptic device. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-04mfd: Add support for the MediaTek MT6397 PMICFlora Fu
This adds support for the MediaTek MT6397 PMIC. This is a multifunction device with the following sub modules: - Regulator - RTC - Audio codec - GPIO - Clock It is interfaced to the host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6397 MFD is a child device of the pwrap. Signed-off-by: Flora Fu, MediaTek Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03mfd: rtsx: Remove LCTLR definationMicky Ching
To enable/disable ASPM we should find LINK CONTROL register in PCI config space. All old chip use 0x80 address, but new chip may use another address, so we using pci_find_capability() to get LINK CONTROL address. rtsx_gops.c was removed, we consider to put some common operations to this file, but the actual thing is, only a group of chips are in common ops1, and another group of chips in common ops2, it is hard to decide put which ops into generic ops file. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-22mfd: qcom-rpm: Driver for the Qualcomm RPMBjorn Andersson
Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-22mfd: Add support for DA9150 combined charger & fuel-gauge deviceAdam Thomson
DA9150 is a combined Charger and Fuel-Gauge IC, with additional GPIO and GPADC functionality. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-22mfd: rt5033: Add Richtek RT5033 driver core.Beomho Seo
This patch adds a new driver for Richtek RT5033 driver. RT5033 is a Multifunction device which includes battery charger, fuel gauge, flash LED current source, LDO and synchronous Buck converter. It is interfaced to host controller using I2C interface. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: rtsx: Fix PM suspend for 5227 & 5249Micky Ching
Fix rts5227&5249 failed send buffer cmd after suspend, PM_CTRL3 should reset before send any buffer cmd after suspend. Otherwise, buffer cmd will failed, this will lead resume fail. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: Add atmel-hlcdc driverBoris Brezillon
The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5 family or sama5d3 family) exposes 2 subdevices: - a display controller (controlled by a DRM driver) - a PWM chip The MFD device provides a regmap and several clocks (those connected to this hardware block) to its subdevices. This way concurrent accesses to the iomem range are handled by the regmap framework, and each subdevice can safely access HLCDC registers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-10mfd: Add support for Diolan DLN-2 devicesOctavian Purdila
This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO Master Adapter DLN-2. Details about the device can be found here: https://www.diolan.com/i2c/i2c_interface.html. Information about the USB protocol can be found in the Programmer's Reference Manual [1], see section 1.7. Because the hardware has a single transmit endpoint and a single receive endpoint the communication between the various DLN2 drivers and the hardware will be muxed/demuxed by this driver. Each DLN2 module will be identified by the handle field within the DLN2 message header. If a DLN2 module issues multiple commands in parallel they will be identified by the echo counter field in the message header. The DLN2 modules can use the dln2_transfer() function to issue a command and wait for its response. They can also register a callback that is going to be called when a specific event id is generated by the device (e.g. GPIO interrupts). The device uses handle 0 for sending events. [1] https://www.diolan.com/downloads/dln-api-manual.pdf Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: Add support for Qualcomm SPMI PMICsJosh Cartwright
The Qualcomm SPMI PMIC chips are components used with the Snapdragon 800 series SoC family. This driver exists largely as a glue mfd component, it exists to be an owner of an SPMI regmap for children devices described in device tree. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: Add HI6421 PMIC Core driverGuodong Xu
This adds driver to support HiSilicon Hi6421 PMIC. Hi6421 includes multi- functions, such as regulators, codec, ADCs, Coulomb counter, etc. This driver includes core APIs _only_. Drivers for individul components, like voltage regulators, are implemented in corresponding driver directories and files. Registers in Hi6421 are memory mapped, so using regmap-mmio API. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: RK808: Add new mfd driver for RK808Chris Zhong
The RK808 chip is a power management IC for multimedia and handheld devices. It contains the following components: - Regulators - RTC - Clkout The RK808 core driver is registered as a platform driver and provides communication through I2C with the host device for the different components. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Zhang Qing <zhangqing@rock-chips.com> Tested-by: Heiko <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: Add Ricoh RN5T618 PMIC core driverBeniamino Galvani
Ricoh RN5T618 is a power management IC which integrates 3 step-down DCDC converters, 7 low-dropout regulators, a Li-ion battery charger, fuel gauge, ADC, GPIOs and a watchdog timer. This commit adds a MFD core driver to support the I2C communication with the device. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-24mfd: menf21bmc: Introduce MEN 14F021P00 BMC MFD Core driverAndreas Werner
The MEN 14F021P00 Board Management Controller provides an I2C interface to the host to access the feature implemented in the BMC. The BMC is a PIC Microntroller assembled on CPCI Card from MEN Mikroelektronik and on a few Box/Display Computer. Added MFD Core driver, supporting the I2C communication to the device. The MFD driver currently supports the following features: - Watchdog - LEDs - Hwmon (voltage monitoring) Signed-off-by: Andreas Werner <andreas.werner@men.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-21mfd: max77686: Convert to use regmap_irqJavier Martinez Canillas
By using the generic IRQ support in the Register map API, it is possible to get rid max77686-irq.c and simplify the code. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09Merge branches 'ib-mfd-extcon-regulator-3.17', 'ib-mfd-gpio-3.17' and ↵Lee Jones
'ib-mfd-mmc-3.17' into ibs-for-mfd-merged
2014-06-17mfd: intel_soc_pmic: Crystal Cove supportZhu, Lejun
This patch provides chip-specific support for Crystal Cove. Crystal Cove is the PMIC in Baytrail-T platform. Also adds Intel SoC PMIC support to the build files. Signed-off-by: Yang, Bin <bin.yang@intel.com> Signed-off-by: Zhu, Lejun <lejun.zhu@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-17mfd: max77693: Handle IRQs using regmapRobert Baldyga
This patch modifies mfd driver to use regmap for handling interrupts. It allows to simplify irq handling process. This modifications needed to make small changes in function drivers, which use interrupts. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-06Merge tag 'mfd-for-linus-3.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next Pull MFD updates from Lee Jones: "Changes to existing drivers: - increase DT coverage: arizona, mc13xxx, stmpe-i2c, syscon, sun6i-prcm - regmap use of and/or clean-up: tps65090, twl6040 - basic renaming: max14577 - use new cpufreq helpers: db8500-prcmu - increase regulator support: stmpe, arizona, wm5102 - reduce legacy GPIO overhead: stmpe - provide necessary remove path: bcm590xx - expand sysfs presence: kempld - move driver specific code out to drivers: rtc-s5m, arizona - clk handling: twl6040 - use managed (devm_*) resources: ipaq-micro - clean-up/remove unused/duplicated code: tps65218, sec, pm8921, abx500-core, db8500-prcmu, menelaus - build/boot/sematic bug fixes: rtsx_usb, stmpe, bcm590xx, abx500, mc13xxx, rdc321x-southbridge, mfd-core, sec, max14577, syscon, cros_ec_spi - constify stuff: sm501, tps65910, tps6507x, tps6586x, max77686, max8997, kempld, max77693, max8907, rtsx_usb, db8500-prcmu, max8998, wm8400, sec, lp3943, max14577, as3711, omap-usb-host, ipaq-micro Support for new devices: - add support for max77836 into max14577 - add support for tps658640 into tps6586x - add support for cros-ec-i2c-tunnel into cros_ec - add new driver for rtsx_usb_sdmmc and rtsx_usb_ms - add new driver for axp20x - add new driver for sun6i-prcm - add new driver for ipaq-micro" * tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (77 commits) mfd: wm5102: Correct default for LDO Control 2 register mfd: menelaus: Use module_i2c_driver mfd: tps65218: Terminate of match table mfd: db8500-prcmu: Remove check for CONFIG_DBX500_PRCMU_DEBUG mfd: ti-keystone-devctrl: Add bindings for device state control mfd: palmas: Format the header file mfd: abx500-core: Remove unused function abx500_dump_all_banks() mfd: arizona: Correct addresses of always-on trigger registers mfd: max14577: Cast to architecture agnostic data type i2c: ChromeOS EC tunnel driver mfd: cros_ec: Sync to the latest cros_ec_commands.h from EC sources mfd: cros_ec: spi: Increase cros_ec_spi deadline from 5ms to 100ms mfd: cros_ec: spi: Make the cros_ec_spi timeout more reliable mfd: cros_ec: spi: Add mutex to cros_ec_spi mfd: cros_ec: spi: Calculate delay between transfers correctly mfd: arizona: Correct error message for addition of main IRQ chip mfd: wm8997: Add registers for high power mode mfd: arizona: Add MICVDD to mapped regulators mfd: ipaq-micro: Make mfd_cell array const mfd: ipaq-micro: Use devm_ioremap_resource() ...
2014-06-03mfd: Add driver for Atmel Microcontroller on iPaq h3xxxLinus Walleij
This adds a driver for the Atmel Microcontroller found on the iPAQ h3xxx series. This device handles some keys, the touchscreen, and the battery monitoring. This is a port of a driver from handhelds.org 2.6.21 kernel, written by Alessandro Gardich based on Andrew Christians original HAL-driver. It has been heavily cleaned and converted to mfd-core by Dmitry Artamonow and rewritten again for the v3.x series kernels by Linus Walleij, bringing back some of the functionality lost from Andrew's original driver. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alessandro Gardich <gremlin@gremlin.it> Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: Add support for sun6i PRCM (Power/Reset/Clock Management) unitBoris BREZILLON
The PRCM (Power/Reset/Clock Management) block exposes several subdevices in different subsystems (clk, reset ...) Add basic support for the PRCM unit with clk (AR100, AHB0, and APB0 clks) and reset controller subdevices. Other subdevices might be added later (if needed). Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: AXP20x: Add mfd driver for AXP20x PMICCarlo Caione
This patch introduces the preliminary support for PMICs X-Powers AXP202 and AXP209. The AXP209 and AXP202 are the PMUs (Power Management Unit) used by A10, A13 and A20 SoCs and developed by X-Powers, a sister company of Allwinner. The core enables support for two subsystems: - PEK (Power Enable Key) - Regulators Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-05-15mfd: vexpress: Define the device as MFD cellsPawel Moll
This patch - finally, after over 6 months! :-( - addresses Samuel's request to split the vexpress-sysreg driver into smaller portions and define the device in a form of MFD cells: * LEDs code has been completely removed and replaced with "gpio-leds" nodes in the tree (referencing dedicated GPIO subnodes in sysreg - bindings documentation updated); this also better fits the reality as some variants of the motherboard don't have all the LEDs populated * syscfg bridge code has been extracted into a separate driver (placed in drivers/misc for no better place) * all the ID & MISC registers are defined as sysconf making them available for other drivers should they need to use them (and also to the user via /sys/kernel/debug/regmap which can be helpful in platform debugging) Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15mfd: vexpress: Convert custom func API to regmapPawel Moll
Components of the Versatile Express platform (configuration microcontrollers on motherboard and daughterboards in particular) talk to each other over a custom configuration bus. They provide miscellaneous functions (from clock generator control to energy sensors) which are represented as platform devices (and Device Tree nodes). The transactions on the bus can be generated by different "bridges" in the system, some of which are universal for the whole platform (for the price of high transfer latencies), others restricted to a subsystem (but much faster). Until now drivers for such functions were using custom "func" API, which is being replaced in this patch by regmap calls. This required: * a rework (and move to drivers/bus directory, as suggested by Samuel and Arnd) of the config bus core, which is much simpler now and uses device model infrastructure (class) to keep track of the bridges; non-DT case (soon to be retired anyway) is simply covered by a special device registration function * the new config-bus driver also takes over device population, so there is no need for special matching table for of_platform_populate nor "simple-bus" hack in the arm64 model dtsi file (relevant bindings documentation has been updated); this allows all the vexpress devices fit into normal device model, making it possible to remove plenty of early inits and other hacks in the near future * adaptation of the syscfg bridge implementation in the sysreg driver, again making it much simpler; there is a special case of the "energy" function spanning two registers, where they should be both defined in the tree now, but backward compatibility is maintained in the code * modification of the relevant drivers: * hwmon - just a straight-forward API change * power/reset driver - API change * regulator - API change plus error handling simplification * osc clock driver - this one required larger rework in order to turn in into a standard platform driver Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mike Turquette <mturquette@linaro.org>
2014-03-19mfd: Remove obsolete ti-ssp driverArnd Bergmann
The tnetv107x platform is getting removed, so this driver is not needed any more. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: Add bcm590xx pmu driverMatt Porter
Add a driver for the BCM590xx PMU multi-function devices. The driver initially supports regmap initialization and instantiation of the voltage regulator device function of the PMU. Signed-off-by: Matt Porter <mporter@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: pm8xxx: Move pm8xxx-irq.c contents into only driver that uses itStephen Boyd
The pm8xxx-irq.c code is practically mandatory given that the pm8921-core driver will WARN about it missing and the Kconfig marks it as default y when a PM8xxx chips is enabled. The only reason the file was split out was because we planned to support other pm8xxx chips with different pm8xxx-core.c files. Now that we have DT on ARM this isn't necessary because we should be able to support all the ssbi based PM8xxx chips in one driver and one file with no data bloat. Let's move this code into the only driver that uses it right now (pm8921) so that it's always compiled when needed. In the future we can rename pm8921-core.c to something more generic. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: Add realtek USB card reader driverRoger Tseng
Realtek USB card reader provides a channel to transfer command or data to flash memory cards. This driver exports host instances for mmc and memstick subsystems and handles basic works. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: tps65218: Add driver for the TPS65218 PMICKeerthy
The TPS65218 chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators. - Over Temperature warning and Shut down. This patch adds support for tps65218 mfd device. At this time only the regulator functionality is made available. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: twl4030-madc: Move driver to drivers/iio/adcSebastian Reichel
This is a driver for an A/D converter, which belongs into drivers/iio/adc. Signed-off-by: Sebastian Reichel <sre@debian.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: Add LP3943 MFD driverMilo Kim
LP3943 has 16 output pins which can be used as GPIO expander and PWM generator. * Regmap I2C interface for R/W LP3943 registers * Atomic operations for output pin assignment The driver should check whether requested pin is available or not. If the pin is already used, pin request returns as a failure. A driver data, 'pin_used' is checked when gpio_request() and pwm_request() are called. If the pin is available, then pin_used is set. And it is cleared when gpio_free() and pwm_free(). * Device tree support Compatible strings for GPIO and PWM driver. LP3943 platform data is PWM related, so parsing the device tree is implemented in the PWM driver. Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max14577: Add max14577 MFD driver coreChanwoo Choi
This patch adds max14577 core/irq driver to support MUIC(Micro USB IC) device and charger device and support irq domain method to control internal interrupt of max14577 device. Also, this patch supports DT binding with max14577_i2c_parse_dt(). The MAXIM 14577 chip contains Micro-USB Interface Circuit and Li+ Battery Charger. It contains accessory and USB charger detection logic. It supports USB 2.0 Hi-Speed, UART and stereo audio signals over Micro-USB connector. The battery charger is compliant with the USB Battery Charging Specification Revision 1.1. It has also SFOUT LDO output for powering USB devices. Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-10-23mfd: Add support for ams AS3722 PMICLaxman Dewangan
The ams AS3722 is a compact system PMU suitable for mobile phones, tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down controller, 11 LDOs, RTC, automatic battery, temperature and over-current monitoring, 8 GPIOs, ADC and a watchdog. Add MFD core driver for the AS3722 to support core functionality. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-10-23mfd: Add STw481x driverLinus Walleij
This adds a driver for the STw481x PMICs found in the Nomadik family of platforms. This one uses pure device tree probing. Print some of the OTP registers on boot and register a regulator MFD child. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-08-20mfd: da9063: Add IRQ supportKrystian Garbaciak
This patch adds a regmap irqchip for DA9063 IRQs. It depends on git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git tags/regmap-irq-ack-mask Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-08-20mfd: da9063: Add Dialog DA9063 core driverKrystian Garbaciak
This is MFD module providing access to registers and interrupts of DA906x series PMIC. It is used by other functional modules, registered as MFD cells. Driver uses regmap with paging to access extended register list. Register map is divided into two pages, where the second page is used during initialisation. This module provides support to following functional cells: - Regulators - RTC - HWMON - OnKey (power key misc input device) - Vibration (force-feedback input device) - Watchdog - LEDs Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-24mfd: Kontron PLD mfd driverKevin Strasser
Add core MFD driver for the on-board PLD found on some Kontron embedded modules. The PLD device may provide functions like watchdog, GPIO, UART and I2C bus. The following modules are supported: * COMe-bIP# * COMe-bPC2 (ETXexpress-PC) * COMe-bSC# (ETXexpress-SC T#) * COMe-cCT6 * COMe-cDC2 (microETXexpress-DC) * COMe-cPC2 (microETXexpress-PC) * COMe-mCT10 * ETX-OH Originally-From: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-18mfd: arizona: Integrate wm8997 into Arizona mfdCharles Keepax
The wm8997 is a compact, high-performance audio hub CODEC with SLIMbus interfacing, for smartphones, tablets and other portable audio devices based on the Arizona platform. This patch integrates the wm8997 into the Arizona mfd. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-11mfd: Move ssbi driver into drivers/mfdArnd Bergmann
There is no reason for ssbi to have its own top-level driver directory when the only users of this interface are all MFD drivers. The only mainline driver using it at the moment (PM8921) is marked broken and in fact does not compile. I have verified that fixing the trivial build breakage in pm8921 links in the new ssbi code just fine, but that can be a separate patch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-19mfd: si476x: Add header files and Kbuild plumbingAndrey Smirnov
This patch adds all necessary header files and Kbuild plumbing for the core driver for Silicon Laboratories Si476x series of AM/FM tuner chips. The driver as a whole is implemented as an MFD device and this patch adds a core portion of it that provides all the necessary functionality to the two other drivers that represent radio and audio codec subsystems of the chip. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-19mfd: rtsx: Support RTS5249Wei WANG
RTS5249 supports SD UHS-II interface. In order to support SD UHS-II,the definitions of some internal registers of RTS5249 have to be modified and are different from its predecessors. So we need this patch to ensure RTS5249 can work, even SD/MMC stack doesn't support UHS-II interface. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-05mfd: Add ChromeOS EC SPI driverSimon Glass
This uses a SPI bus to talk to the ChromeOS EC. The protocol is defined by the EC and is fairly simple, with a length byte, checksum, command byte and version byte (to permit easy creation of new commands). Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-05mfd: Add ChromeOS EC I2C driverSimon Glass
This uses an I2C bus to talk to the ChromeOS EC. The protocol is defined by the EC and is fairly simple, with a length byte, checksum, command byte and version byte (to permit easy creation of new commands). Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-05mfd: Add ChromeOS EC implementationSimon Glass
This is the base EC implementation, which provides a high level interface to the EC for use by the rest of the kernel. The actual communcations is dealt with by a separate protocol driver which registers itself with this interface. Interrupts are passed on through a notifier. A simple message structure is used to pass messages to the protocol driver. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Jonathan Kliegman <kliegs@chromium.org> Signed-off-by: Luigi Semenzato <semenzato@chromium.org> Signed-off-by: Olof Johansson <olofj@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14mfd: rtsx: Support RTS5227Roger Tseng
Support new model RTS5227. Signed-off-by: Roger Tseng <rogerable@realtek.com> Reviewed-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-12-16Merge tag 'mfd-3.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS update from Samuel Ortiz: "This is the MFD patch set for the 3.8 merge window. We have several new drivers, most of the time coming with their sub devices drivers: - Austria Microsystem's AS3711 - Nano River's viperboard - TI's TPS80031, AM335x TS/ADC, - Realtek's MMC/memstick card reader - Nokia's retu We also got some notable cleanups and improvements: - tps6586x got converted to IRQ domains. - tps65910 and tps65090 moved to the regmap IRQ API. - STMPE is now Device Tree aware. - A general twl6040 and twl-core cleanup, with moves to the regmap I/O and IRQ APIs and a conversion to the recently added PWM framework. - sta2x11 gained regmap support. Then the rest is mostly tiny cleanups and fixes, among which we have Mark's wm5xxx and wm8xxx patchset." Far amount of annoying but largely trivial conflicts. Many due to __devinit/exit removal, others due to one or two of the new drivers also having come in through another tree. * tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits) mfd: tps6507x: Convert to devm_kzalloc mfd: stmpe: Update DT support for stmpe driver mfd: wm5102: Add readback of DSP status 3 register mfd: arizona: Log if we fail to create the primary IRQ domain mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ mfd: tps80031: Add terminating entry for tps80031_id_table mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask() mfd: wm5102: Add tuning for revision B mfd: arizona: Defer patch initialistation until after first device boot mfd: tps65910: Fix wrong ack_base register mfd: tps65910: Remove unused data mfd: stmpe: Get rid of irq_invert_polarity mfd: ab8500-core: Fix invalid free of devm_ allocated data mfd: wm5102: Mark DSP memory regions as volatile mfd: wm5102: Correct default for LDO1_CONTROL_2 mfd: arizona: Register haptics devices mfd: wm8994: Make current device behaviour the default mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ mfd: Fix stmpe.c build when OF is not enabled mfd: jz4740-adc: Use devm_kzalloc ...
2012-12-12Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC updates from Olof Johansson: "This contains the bulk of new SoC development for this merge window. Two new platforms have been added, the sunxi platforms (Allwinner A1x SoCs) by Maxime Ripard, and a generic Broadcom platform for a new series of ARMv7 platforms from them, where the hope is that we can keep the platform code generic enough to have them all share one mach directory. The new Broadcom platform is contributed by Christian Daudt. Highbank has grown support for Calxeda's next generation of hardware, ECX-2000. clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also taken on maintainership of the platform. Beyond this there has been a bunch of work from a number of people on converting more platforms to IRQ domains, pinctrl conversion, cleanup and general feature enablement across most of the active platforms." Fix up trivial conflicts as per Olof. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits) mfd: vexpress-sysreg: Remove LEDs code irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids irq: versatile: delete dangling variable ARM: sunxi: add missing include for mdelay() ARM: EXYNOS: Avoid early use of of_machine_is_compatible() ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers ARM: sunxi: Add missing sun4i.dtsi file pinctrl: samsung: Do not initialise statics to 0 ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup ...
2012-11-23mfd: Add an AS3711 PMIC MFD driverGuennadi Liakhovetski
AS3711 is a PMIC with multiple DCDC and LDO power supplies, GPIOs, an RTC, a battery charger and a general purpose ADC. This patch adds support for the MFD with support for a regulator driver and a backlight driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>