summaryrefslogtreecommitdiff
path: root/drivers/mmc/card
AgeCommit message (Collapse)Author
2012-07-10mmc: block: replace __blk_end_request() with blk_end_request()Subhash Jadavani
For completing any block request, MMC block driver is calling: spin_lock_irq(queue) __blk_end_request() spin_unlock_irq(queue) But if we analyze the sources of latency in kernel using ftrace, __blk_end_request() function at times may take up to 6.5ms with spinlock held and irq disabled. __blk_end_request() calls couple of functions and ftrace output shows that blk_update_bidi_request() function is almost taking 6ms. There are 2 function to end the current request: ___blk_end_request() and blk_end_request(). Both these functions do same thing except that blk_end_request() function doesn't take up the spinlock while calling the blk_update_bidi_request(). This patch replaces all __blk_end_request() calls with blk_end_request() and __blk_end_request_all() calls with blk_end_request_all(). Testing done: 20 process concurrent read/write on sd card and eMMC. Ran this test for almost a day on multicore system and no errors observed. This change is not meant for improving MMC throughput; it's basically about becoming fair to other threads/interrupts in the system. By holding spin lock and interrupts disabled for longer duration, we won't allow other threads/interrupts to run at all. Actually slight performance degradation at file system level can be expected as we are not holding the spin lock during blk_update_bidi_request() which means our mmcqd thread may get preempted for other high priority thread or any interrupt in the system. These are performance numbers (100MB file write) with eMMC running in DDR mode: Without this patch: Name of the Test Value Unit LMDD Read Test 53.79 MBPS LMDD Write Test 18.86 MBPS IOZONE Read Test 51.65 MBPS IOZONE Write Test 24.36 MBPS With this patch: Name of the Test Value Unit LMDD Read Test 52.94 MBPS LMDD Write Test 16.70 MBPS IOZONE Read Test 52.08 MBPS IOZONE Write Test 23.29 MBPS Read numbers are fine. Write numbers are bit down (especially LMDD write), may be because write requests normally have large transfer size and which means there are chances that while mmcq is executing blk_update_bidi_request(), it may get interrupted by interrupts or other high priority thread. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-26mmc: block: fix the data timeout issue with ACMD22Subhash Jadavani
If multi block write operation fails for SD card, during error handling we send the SD_APP_SEND_NUM_WR_BLKS (ACMD22) to know how many blocks were already programmed by card. But mmc_sd_num_wr_blocks() function which sends the ACMD22 calculates the data timeout value from csd.tacc_ns and csd.tacc_clks parameters which will be 0 for block addressed (>2GB cards) SD card. This would result in timeout_ns and timeout_clks being 0 in the mmc_request passed to host driver. This means host controller would program its data timeout timer value with 0 which could result in DATA TIMEOUT errors from controller. To fix this issue, mmc_sd_num_wr_blocks() should instead just call the mmc_set_data_timeout() to calculate the data timeout value. mmc_set_data_timeout() function ensures that non zero timeout value is set even for block addressed SD cards. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-17mmc: block: Allow disabling 512B sector size emulationSaugata Das
This patch adds support for large sector size of 4KB by disabling emulation. This patch passes eMMC DATA_SECTOR_SIZE as the logical block size during mmc_blk_alloc_req. In order to use this patch for 4KB sector size, ensure that USE_NATIVE_SECTOR is enabled, partition table is 4KB sector size aligned and file system block and sector size are 4KB multiples. Signed-off-by: Saugata Das <saugata.das@linaro.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-09mmc: card: Avoid null pointer dereferencePhilippe De Swert
After the null check on md the code jumped to cmd_done, which then will dereference md in mmc_blk_put. This patch avoids the possible null pointer dereference in that case. Signed-off-by: Philippe De Swert <philippedeswert@gmail.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-09mmc: queue: remove redundant memsetsVenkatraman S
Not needed to memset, as they are pointers and are assigned to proper values in the next line anyway. Signed-off-by: Venkatraman S <svenkatr@ti.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-09mmc: queue: rename mmc_request functionVenkatraman S
The name mmc_request is used for both the issue function and a data structure, which creates conflicts in symbol lookups in editors. Rename the function to mmc_request_fn. Signed-off-by: Venkatraman S <svenkatr@ti.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-20mmc: remove MMC bus legacy suspend/resume methodChuanxiao Dong
MMC bus is using legacy suspend/resume method, which is not compatible if runtime pm callbacks are used. In this scenario, MMC bus suspend/resume callbacks cannot be called when system entering S3. So change to use the new defined dev_pm_ops for system sleeping mode. Tested on AM335x Platform. Solves major issue/crash reported at http://www.mail-archive.com/linux-omap@vger.kernel.org/msg65425.html Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Tested-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-20mmc: fixes for eMMC v4.5 sanitize operationAdrian Hunter
eMMC v4.5 sanitize operation erases all copies of unmapped data. However trim or erase operations must be used first to unmap the required sectors. That was not being done. Fixes apply to linux 3.2 on. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: <stable@vger.kernel.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-20mmc: fixes for eMMC v4.5 discard operationAdrian Hunter
eMMC v4.5 discard operation is significantly different from the existing trim operation because it is not guaranteed to work with the new sanitize operation. Consequently mmc_can_trim() is separated from mmc_can_discard(). Also the new discard operation does not result in the sectors being set to all-zeros, so discard_zeroes_data must not be set. In addition, the new discard has the same timeout as trim, but from v4.5 trim is defined to use the hc timeout. The timeout calculation is adjusted accordingly. Fixes apply to linux 3.2 on. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: <stable@vger.kernel.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-05mmc: block: Remove use of mmc_blk_set_blksizeUlf Hansson
According to the specifications for SD and (e)MMC default blocksize (named BLOCKLEN in Spec.) must always be 512 bytes. Since we hardcoded to always use 512 bytes, we do not explicitly have to set it. Future improvements should potentially make it possible to use a greater blocksize than 512 bytes, but until then let's skip this. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Reviewed-by: Subhash Jadavani <subhashj@codeauora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-28Merge tag 'mmc-merge-for-3.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: Core: * Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices that support Data Tag will provide increased throughput for metadata. * Faster detection of card removal on I/O errors. Drivers: * dw_mmc now supports eMMC Power Off Notify, has PCI support, and implements pre_req and post_req for asynchronous requests. * omap_hsmmc now supports device tree. * esdhc now has power management support. * sdhci-tegra now supports Tegra30 devices. * sdhci-spear now supports hibernation. * tmio_mmc now supports using a GPIO for card detection. * Intel PCH now supports 8-bit bus transfers. * tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits) mmc: sh_mmcif: simplify bitmask macros mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug mmc: sh_mobile_sdhi: add a callback for board specific init code mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function mmc: sh_mobile_sdhi: do not manage PM clocks manually mmc: tmio_mmc: remove unused sdio_irq_enabled flag mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper mmc: tmio: calculate the native hotplug condition only once mmc: simplify mmc_cd_gpio_request() by removing two parameters mmc: sdhci-pci: allow 8-bit bus width for Intel PCH mmc: sdhci: check interrupt flags in ISR again mmc: sdhci-pci: Add MSI support mmc: core: warn when card doesn't support HPI mmc: davinci: Poll status for small size transfers mmc: davinci: Eliminate spurious interrupts mmc: omap_hsmmc: Avoid a regulator voltage change with dt mmc: omap_hsmmc: Convert hsmmc driver to use device tree mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-25mmc: MMC-4.5 Data Tag SupportSaugata Das
MMC-4.5 data tag feature will be used to store the file system meta-data in the tagged region of eMMC. This will improve the write and subsequent read transfer time for the meta data. Signed-off-by: Saugata Das <saugata.das@linaro.org> Tested-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile 1 from Al Viro: "This is _not_ all; in particular, Miklos' and Jan's stuff is not there yet." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits) ext4: initialization of ext4_li_mtx needs to be done earlier debugfs-related mode_t whack-a-mole hfsplus: add an ioctl to bless files hfsplus: change finder_info to u32 hfsplus: initialise userflags qnx4: new helper - try_extent() qnx4: get rid of qnx4_bread/qnx4_getblk take removal of PF_FORKNOEXEC to flush_old_exec() trim includes in inode.c um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it um: embed ->stub_pages[] into mmu_context gadgetfs: list_for_each_safe() misuse ocfs2: fix leaks on failure exits in module_init ecryptfs: make register_filesystem() the last potential failure exit ntfs: forgets to unregister sysctls on register_filesystem() failure logfs: missing cleanup on register_filesystem() failure jfs: mising cleanup on register_filesystem() failure make configfs_pin_fs() return root dentry on success configfs: configfs_create_dir() has parent dentry in dentry->d_parent configfs: sanitize configfs_create() ...
2012-03-20debugfs-related mode_t whack-a-moleAl Viro
all of those should be umode_t... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20Merge tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds
Pull TTY/serial patches from Greg KH: "tty and serial merge for 3.4-rc1 Here's the big serial and tty merge for the 3.4-rc1 tree. There's loads of fixes and reworks in here from Jiri for the tty layer, and a number of patches from Alan to help try to wrestle the vt layer into a sane model. Other than that, lots of driver updates and fixes, and other minor stuff, all detailed in the shortlog." * tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits) serial: pxa: add clk_prepare/clk_unprepare calls TTY: Wrong unicode value copied in con_set_unimap() serial: PL011: clear pending interrupts serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset. vt: NULL dereference in vt_do_kdsk_ioctl() tty: serial: vt8500: fix annotations for probe/remove serial: remove back and forth conversions in serial_out_sync serial: use serial_port_in/out vs serial_in/out in 8250 serial: introduce generic port in/out helpers serial: reduce number of indirections in 8250 code serial: delete useless void casts in 8250.c serial: make 8250's serial_in shareable to other drivers. serial: delete last unused traces of pausing I/O in 8250 pch_uart: Add module parameter descriptions pch_uart: Use existing default_baud in setup_console pch_uart: Add user_uartclk parameter pch_uart: Add Fish River Island II uart clock quirks pch_uart: Use uartclk instead of base_baud mpc5200b/uart: select more tolerant uart prescaler on low baudrates tty: moxa: fix bit test in moxa_start() ...
2012-03-08TTY: remove re-assignments to tty_driver membersJiri Slaby
All num, magic and owner are set by alloc_tty_driver. No need to re-set them on each allocation site. pti driver sets something different to what it passes to alloc_tty_driver. It is not a bug, since we don't use the lines parameter in any way. Anyway this is fixed, and now we do the right thing. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13mmc: block: Init ro_lock sysfs attr to fix lockdep warningsRabin Vincent
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-02TTY: use tty_standard_installJiri Slaby
Use the helper in the rest of the tty drivers. This is a simple replacement. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-13Merge tag 'mmc-merge-for-3.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc MMC highlights for 3.3: Core: * Support for the HS200 high-speed eMMC mode. * Support SDIO 3.0 Ultra High Speed cards. * Kill pending block requests immediately if card is removed. * Enable the eMMC feature for locking boot partitions read-only until next power on, exposed via sysfs. Drivers: * Runtime PM support for Intel Medfield SDIO. * Suspend/resume support for sdhci-spear. * sh-mmcif now processes requests asynchronously. * tag 'mmc-merge-for-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (58 commits) mmc: fix a deadlock between system suspend and MMC block IO mmc: sdhci: restore the enabled dma when do reset all mmc: dw_mmc: miscaculated the fifo-depth with wrong bit operation mmc: host: Adds support for eMMC 4.5 HS200 mode mmc: core: HS200 mode support for eMMC 4.5 mmc: dw_mmc: fixed wrong bit operation for SDMMC_GET_FCNT() mmc: core: Separate the timeout value for cache-ctrl mmc: sdhci-spear: Fix compilation error mmc: sdhci: Deal with failure case in sdhci_suspend_host mmc: dw_mmc: Clear the DDR mode for non-DDR mmc: sd: Fix SDR12 timing regression mmc: sdhci: Fix tuning timer incorrect setting when suspending host mmc: core: Add option to prevent eMMC sleep command mmc: omap_hsmmc: use threaded irq handler for card-detect. mmc: sdhci-pci: enable runtime PM for Medfield SDIO mmc: sdhci: Always pass clock request value zero to set_clock host op mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTION mmc: sdhci-pci: get gpio numbers from platform data mmc: sdhci-pci: add platform data mmc: sdhci: prevent card detection activity for non-removable cards ...
2012-01-11mmc: card: Kill block requests if card is removedSujit Reddy Thumma
Kill block requests when the host realizes that the card is removed from the slot and is sure that subsequent requests are bound to fail. Do this silently so that the block layer doesn't output unnecessary error messages. Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: boot partition ro lock supportJohan Rudholm
Enable boot partitions to be read-only locked until next power on via a sysfs entry. There will be one sysfs entry for each boot partition: /sys/block/mmcblkXbootY/ro_lock_until_next_power_on Each boot partition is locked by writing 1 to its file. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: John Beckett <john.beckett@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: core: check for zero length ioctl dataJohan Rudholm
If the read or write buffer size associated with the command sent through the mmc_blk_ioctl is zero, do not prepare data buffer. This enables a ioctl(2) call to for instance send a MMC_SWITCH to set a byte in the ext_csd. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: mmc_test: align max_seg_sizePer Forlin
If max_seg_size is unaligned, mmc_test_map_sg() may create sg element sizes that are not aligned with 512 byte. Fix, align max_seg_size at mmc_test_area_init(). Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11mmc: card: Use manufacturer ID symbols in card quirks.Chris Ball
No functional change; adds macros for card manufacturer IDs. Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Andrei E. Warkentin <andrey.warkentin@gmail.com> Cc: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
2012-01-03switch debugfs to umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-10mmc: core: Add quirk for long data read timeStefan Nilsson XK
Adds a quirk that sets the data read timeout to a fixed value instead of relying on the information in the CSD. The timeout value chosen is 300ms since that has proven enough for the problematic cards found, but could be increased if other cards require this. This patch also enables this quirk for certain Micron cards known to have this problem. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-27mmc: core: add workaround for controllers with broken multiblock readsPaul Walmsley
Due to hardware bugs, some MMC host controllers don't support multiple-block reads[1]. To resolve, add a new MMC capability flag, MMC_CAP2_NO_MULTI_READ, which can be set by affected host controller drivers. When this capability is set, all reads will be issued one sector at a time. 1. See for example Advisory 2.1.1.128 "MMC: Multiple Block Read Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ Revision F (October 2010) (SPRZ278F), available from http://focus.ti.com/lit/er/sprz278f/sprz278f.pdf Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Dave Hylands <dhylands@gmail.com> Tested-by: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: core: Add cache control for eMMC4.5 deviceSeungwon Jeon
This patch adds cache feature of eMMC4.5 Spec. If device supports cache capability, host can utilize some specific operations. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: core: new discard feature support at eMMC v4.5Kyungmin Park
MMC v4.5 supports the DISCARD feature (CMD38). It's different from trim and there's no check bit. Currently it's only supported at v4.5. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: core: mmc sanitize feature support for v4.5Kyungmin Park
In the v4.5, there's no secure erase & trim support. Instead it supports the sanitize feature. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: replace printk with appropriate display macroGirish K S
All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: Add module.h to drivers/mmc users assuming implicit presence.Paul Gortmaker
We are cleaning up the implicit presence of module.h; these guys are some of the people who just assume it will be there. Call it out explitly for those that really need it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: core: general purpose MMC partition support.Namjae Jeon
It allows gerneral purpose partitions in MMC Device. And I try to simply make mmc_blk_alloc_parts using mmc_part structure suggested by Andrei Warkentin. After patching, we see general purpose partitions like this: > cat /proc/partitions 179 0 847872 mmcblk0 179 192 4096 mmcblk0gp3 179 160 4096 mmcblk0gp2 179 128 4096 mmcblk0gp1 179 96 1052672 mmcblk0gp0 179 64 1024 mmcblk0boot1 179 32 1024 mmcblk0boot0 Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Andrei Warkentin <awarkentin@vmware.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: block: support no access to boot partitionsAdrian Hunter
Intel Medfield platform blocks access to eMMC boot partitions which results in switch errors. Since there is no access, mmcboot0/1 devices should not be created. Add a host capability to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: block: fix boot partition switch error pathAdrian Hunter
In the case of a switch error, do not update partition config as though the switch succeeded, and ensure blk_end_request is called on the failed request. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Andrei Warkentin <andrey.warkentin@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: block: add eMMC hardware reset supportAdrian Hunter
For cards that support hardware reset (just eMMC), try a reset and retry before returning an I/O error. However this is not done for ECC errors and is never done twice for the same operation type (READ, WRITE, DISCARD, SECURE DISCARD) until that type of operation again succeeds. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: mmc-test: add eMMC hardware reset testAdrian Hunter
MMC core provides a checking function that checks if the reset has happended. Add a test to use that function. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: fix integer assignments to pointerVenkatraman S
Fix the sparse warning output "warning: Using plain integer as NULL pointer" Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26mmc: queue: declare mmc_alloc_sg as staticVenkatraman S
Fix the sparse warning "drivers/mmc/card/queue.c:111:20: warning: symbol 'mmc_alloc_sg' was not declared. Should it be static?" Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-08-23block: separate priority boosting from REQ_METAChristoph Hellwig
Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule, and lave REQ_META purely for marking requests as metadata in blktrace. All existing callers of REQ_META except for XFS are updated to also set REQ_PRIO for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-13mmc: core: use defined R1_STATE_PRG macro for card statusJaehoon Chung
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-08-13mmc: mmc_test: avoid stalled file in debugfsAndy Shevchenko
During card removal and inserting cycle the test file in the debugfs could be stalled until the host driver removes it. Let's keep the file in the linked list and destroy it when card is removed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-21mmc: block: fixed NULL pointer dereferenceJaehoon Chung
We already check for ongoing async transfers when handling discard requests, but not in mmc_blk_issue_flush(). This patch fixes that omission. Tested with an SDHCI controller and eMMC4.41. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Per Forlin <per.forlin@linaro.org> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: block: add handling for two parallel block requests in issue_rw_rqPer Forlin
Change mmc_blk_issue_rw_rq() to become asynchronous. The execution flow looks like this: * The mmc-queue calls issue_rw_rq(), which sends the request to the host and returns back to the mmc-queue. * The mmc-queue calls issue_rw_rq() again with a new request. * This new request is prepared in issue_rw_rq(), then it waits for the active request to complete before pushing it to the host. * When the mmc-queue is empty it will call issue_rw_rq() with a NULL req to finish off the active request without starting a new request. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: queue: add a second mmc queue request memberPer Forlin
Add an additional mmc queue request instance to make way for two active block requests. One request may be active while the other request is being prepared. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: block: move error path in issue_rw_rq to a separate function.Per Forlin
Break out code without functional changes. This simplifies the code and makes way for handling two parallel requests. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar<sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: block: add a block request prepare functionPer Forlin
Break out code from mmc_blk_issue_rw_rq to create a block request prepare function. This doesn't change any functionallity. This helps when handling more than one active block request. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: block: add member in mmc queue struct to hold request dataPer Forlin
The way the request data is organized in the mmc queue struct, it only allows processing of one request at a time. This patch adds a new struct to hold mmc queue request data such as sg list, request, blk request and bounce buffers, and updates any functions depending on the mmc queue struct. This prepares for using multiple active requests in one mmc queue. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: mmc_test: test to measure how sg_len affect performancePer Forlin
Add a test that measures how the mmc bandwidth depends on the numbers of sg elements in the sg list. The transfer size if fixed and sg length goes from a few up to 512. The purpose is to measure overhead caused by multiple sg elements. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>