summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2011-02-11Revert "mmc: subtract boot sectors from disk size for eMMC 4.3+ devices"Colin Cross
This reverts commit 2cdc235bbeb09b2b78cd02a94ab79c265861aea9. The reverted commit incorrectly calculates the size of eMMC devices in some (all?) cases. This revert may cause problems in cases where the bootloader was bug-compatible and puts a GPT partition at the incorrect end of the eMMC device. Change-Id: Icc9ddb3d294aa2a1caeddfe8fedd2e12aa7691e1
2011-02-11Revert "mmc: fix non-arm build due to eMMC 4.3+ change"Colin Cross
This reverts commit 1c119f2c1667ea2747693f7fd2166205e1a10b09.
2011-01-07Merge commit 'v2.6.36.3' into linux-tegra-2.6.36Colin Cross
2011-01-07mmc: Fix re-probing with PM_POST_RESTORE notificationTakashi Iwai
commit 274476f8fe0b6ac9bac542cc39de12c3dd0f43f6 upstream. In the error-path where PM notifies PM_POST_RESTORE, the rescan-blockage should be cleared as well. Otherwise it'll be never re-probed. Also, as a bonus, this fixes a bug in S4 with user-mode suspend in the current code, as it sends PM_POST_RESTORE instead of PM_POST_HIBERNATION wrongly. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-07mmc: atmel-mci: fix multiblock SDIO transfersNicolas Ferre
commit 2f1d791882d21a4002a719fb016a1ac21c8bd6b7 upstream. Based on report made by Yauhen in: "MMC: Fix multiblock SDIO transfers in AT91 MCI" patch, I report those changes to the brother driver: atmel-mci. So, this patch sets SDIO transfer types: SDIO block and SDIO byte transfers instead of using ordinary MMC block transfers. It is checking opcode for SDIO CMD53 and setting transfer type in MCI_CMDR register properly. Reported-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-07mmc: at91_mci: fix multiblock SDIO transfersYauhen Kharuzhy
commit a2255ff45143001fecbc5e5a4b58fcb999d393ae upstream. The AT91 MCI has special SDIO transfer types: SDIO block and SDIO byte transfers, but at91_mci driver doesn't use them and handles all SDIO transfers as ordinary MMC block transfers. This causes problems for multiple-block SDIO transfers (in particular for 256-bytes blocks). Fix this situation by checking the opcode for SDIO CMD53 and setting the transfer type in the AT91_MCI_CMDR register properly. This patch was tested with libertas SDIO driver: problem with TX timeouts on big packets was eliminated. Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-21Merge commit 'v2.6.36.2' into linux-tegra-2.6.36Colin Cross
2010-12-09mmc: fix rmmod race for hosts using card-detection pollingGuennadi Liakhovetski
commit d9bcbf343ec63e1104b5276195888ee06b4d086f upstream. MMC hosts that poll for card detection by defining the MMC_CAP_NEEDS_POLL flag have a race on rmmod, where the delayed work is cancelled without waiting for completed polling. To prevent this a _sync version of the work cancellation has to be used. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-21Merge commit 'v2.6.36' into linux-tegra-2.6.36Colin Cross
2010-10-19mmc: sdhci: Enable MMC_CAP_ERASEDmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2010-10-15mmc: sdio: fix SDIO suspend/resume regressionOhad Ben-Cohen
Fix SDIO suspend/resume regression introduced by 4c2ef25fe0b "mmc: fix all hangs related to mmc/sd card insert/removal during suspend/resume": PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) pm_op(): platform_pm_suspend+0x0/0x5c returns -38 PM: Device pxa2xx-mci.0 failed to suspend: error -38 PM: Some devices failed to suspend 4c2ef25fe0b moved the card removal/insertion mechanism out of MMC's suspend/resume path and into pm notifiers (mmc_pm_notify), and that broke SDIO's expectation that mmc_suspend_host() will remove the card, and squash the error, in case -ENOSYS is returned from the bus suspend handler (mmc_sdio_suspend() in this case). mmc_sdio_suspend() is using this whenever at least one of the card's SDIO function drivers does not have suspend/resume handlers - in that case it is agreed to force removal of the entire card. This patch fixes this regression by trivially bringing back that part of mmc_suspend_host(), which was removed by 4c2ef25fe0b. Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: <stable@kernel.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-07mmc: sdhci: Fix 4-bit wide support capabilityDmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2010-10-06mmc: host: sdhci-tegra: Add no hispd quirkColin Cross
Change-Id: I3a4f1b8960a5cc71af31aeef8c5285c0cfefe145 Signed-off-by: Colin Cross <ccross@android.com>
2010-10-06mmc: host: sdhci: Prevent IRQ capability from being set if quirk is setColin Cross
Change-Id: I18a622844a69ed00fee798786c28c75d10ba7c81 Signed-off-by: Colin Cross <ccross@android.com>
2010-10-06tegra: sdhci: Remove set_clock op, not neededTodd Poynor
The SDHCI controller specifies a maximum SDCLK speed of 48MHz, which is now in agreement with the platform clock, and so the SDHCI host max_clk no longer needs to be overriden. Change-Id: Ie8c7f643d956cfd1bb83675708336278482c40d8 Signed-off-by: Todd Poynor <toddpoynor@google.com>
2010-10-06mmc: fix non-arm build due to eMMC 4.3+ changeOlof Johansson
drivers/mmc/core/mmc.c:228: error: ‘SZ_256K’ undeclared (first use in this function) Introduced by: mmc: subtract boot sectors from disk size for eMMC 4.3+ devices (SZ_* doesn't exist on anything but arm) Change-Id: I981217adea4ef56bf870562b6711488f3f4bf830 Signed-off-by: Olof Johansson <olof@lixom.net>
2010-10-06mmc: sdhci-tegra: Always call sdhci suspend/resume functionsDmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2010-10-06mmc: sdhci: Skip mmc suspend/resume ops for SDIO device,Dmitry Shmidt
enable/disable sdc irq instead of request/free, mask all sdc interrupts on suspend Change-Id: I3fb137363c6e639882b796aff8b80784c5256a71 Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2010-10-06mmc: subtract boot sectors from disk size for eMMC 4.3+ devicesGary King
the csd sector count reported by eMMC 4.3+ cards includes the boot partition size; subtract this from the size reported to the disk since the boot partition is inaccessible Change-Id: I601b83aa0159b7aa446409ea8c945b256dd0b5b1 Signed-off-by: Gary King <gking@nvidia.com>
2010-10-06tegra-sdhci: treat -1 as invalid card detect GPIOGary King
0 is a valid GPIO number (GPIO_PA0), so the check in the tegra SDHCI driver for a valid card detect pin should compare against -1 instead Change-Id: I47ad31eaf89472b2e6938978d72a9d0b92a74958 Signed-off-by: Gary King <gking@nvidia.com>
2010-10-06drivers: mmc: sdhci-tegra: Add suspend/resume processingDmitry Shmidt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2010-10-06mmc: sdhci: Initial Tegra sdhci driverColin Cross
Change-Id: I6a761b978224fe91dc7928ef5595af2cbd66fc92 Signed-off-by: Colin Cross <ccross@android.com>
2010-09-26mmc: sdhci-s3c: fix NULL ptr access in sdhci_s3c_removeMarek Szyprowski
If not all clocks have been defined in platform data, the driver will cause a null pointer dereference when it is removed. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-09-26mmc: sdhci-s3c: fix incorrect spinlock usage after mergeMarek Szyprowski
In the commit f522886e202a34a2191dd5d471b3c4d46410a9a0 a merge conflict in the sdhci-s3c driver been fixed. However the fix used incorrect spinlock operation - it caused a race with sdhci interrupt service. The correct way to solve it is to use spin_lock_irqsave/irqrestore() calls. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-09-09drivers/mmc/host/imxmmc.c: adjust confusing if indentationJulia Lawall
Move the second if (reg & ...) test into the branch indicated by its indentation. The test was previously always executed after the if containing that branch, but it was always false unless the if branch was taken. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Pavel Pisa <ppisa@pikron.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09omap hsmmc: fix a racing case between kmmcd and omap_hsmmc_suspendEthan Du
If suspend called when kmmcd is doing host->ops->disable, as kmmcd already increased host->en_dis_recurs to 1, the mmc_host_enable in suspend function will return directly without increase the nesting_cnt, which will cause the followed register access carried out to the disabled host. mmc_suspend_host will enable host itself. No need to enable host before it. Also works on kmmcd will get flushed in mmc_suspend_host, enable host after it will be safe. So make the mmc_host_enable after it. [cjb: rebase against current Linus] Signed-off-by: Ethan <ethan.too@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org> Acked-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09mmc: at91_mci: add missing linux/highmem.h includeMarc Kleine-Budde
Fix the following error: at91_mci.c: In function 'at91_mci_sg_to_dma': at91_mci.c:236: error: implicit declaration of function 'kmap_atomic' at91_mci.c:236: error: 'KM_BIO_SRC_IRQ' undeclared (first use in this function) at91_mci.c:236: error: (Each undeclared identifier is reported only once at91_mci.c:236: error: for each function it appears in.) at91_mci.c:236: warning: assignment makes pointer from integer without a cast at91_mci.c:252: error: implicit declaration of function 'kunmap_atomic' at91_mci.c: In function 'at91_mci_post_dma_read': at91_mci.c:302: error: 'KM_BIO_SRC_IRQ' undeclared (first use in this function) at91_mci.c:302: warning: assignment makes pointer from integer without a cast at91_mci.c:317: error: implicit declaration of function 'flush_kernel_dcache_page' Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <avictor.za@gmail.com> Cc: Wolfgang Muees <wolfgang.mues@auerswald.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09omap_hsmmc: remove unused local `state'Sergio Aguirre
This fixes the following warning: drivers/mmc/host/omap_hsmmc.c: In function 'omap_hsmmc_suspend': drivers/mmc/host/omap_hsmmc.c:2275: warning: unused variable 'state' Introduced by commit ID: commit 1a13f8fa76c880be41d6b1e6a2b44404bcbfdf9e Author: Matt Fleming <matt@console-pimps.org> Date: Wed May 26 14:42:08 2010 -0700 mmc: remove the "state" argument to mmc_suspend_host() The unique usage of this var was removed there, and missed removing the respective declaration aswell. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09ARM: SAMSUNG: MMC: fix build error when both DMA and PIO mode selectedJiri Pinkava
[cjb: fix line-wrapped patch] Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz> Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Matt Fleming <matt@console-pimps.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09mmc: fix the use of kunmap_atomic() in tmio_mmc.hGuennadi Liakhovetski
kunmap_atomic() takes the cookie, returned by the kmap_atomic() as its argument and not the page address, used as an argument to kmap_atomic(). This patch fixes the compile error: In file included from drivers/mmc/host/tmio_mmc.c:37: drivers/mmc/host/tmio_mmc.h: In function 'tmio_mmc_kunmap_atomic': drivers/mmc/host/tmio_mmc.h:192: error: negative width in bit-field '<anonymous>' Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Tested-by: Magnus Damm <damm@opensource.se> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09tmio_mmc: don't clear unhandled pending interruptsYusuke Goda
Previously, it was possible for ack_mmc_irqs() to clear pending interrupt bits in the CTL_STATUS register, even though the interrupt handler had not been called. This was because of a race that existed when doing a read-modify-write sequence on CTL_STATUS. After the read step in this sequence, if an interrupt occurred (causing one of the bits in CTL_STATUS to be set) the write step would inadvertently clear it. Observed with the TMIO_STAT_RXRDY bit together with CMD53 on AR6002 and BCM4318 SDIO cards in polled mode. This patch eliminates this race by only writing to CTL_STATUS and clearing the interrupts that were passed as an argument to ack_mmc_irqs()." [matt@console-pimps.org: rewrote changelog] Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se>" Tested-by: Arnd Hannemann <arnd@arndnet.de>" Acked-by: Ian Molton <ian@mnementh.co.uk> Cc: Matt Fleming <matt@console-pimps.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: <linux-mmc@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09mmc: avoid getting CID on SDIO-only cardsDavid Vrabel
The introduction of support for SD combo cards breaks the initialization of all CSR SDIO chips. The GO_IDLE (CMD0) in mmc_sd_get_cid() causes CSR chips to be reset (this is non-standard behavior). When initializing an SDIO card check for a combo card by using the memory present bit in the R4 response to IO_SEND_OP_COND (CMD5). This avoids the call to mmc_sd_get_cid() on an SDIO-only card. Signed-off-by: David Vrabel <david.vrabel@csr.com> Acked-by: Michal Mirolaw <mirq-linux@rere.qmqm.pl> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-20drivers/mmc/host/sdhci-s3c.c: use the correct mutex and card detect functionKyungmin Park
There's some merge problem between sdhic core and sdhci-s3c host. After mutex is changed to spinlock. It needs to use use spin lock functions and use the correct card detection function. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-20sdhci: add no hi-speed bit quirk supportKyungmin Park
Some SDHCI controllers like s5pc110 don't have an HISPD bit in the HOSTCTL register. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-20s5pc110: SDHCI-s3c support on s5pc110Kyungmin Park
s5pc110 (aka s5pv210) uses the same SDHCI IP. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-18mmc: build fix: mmc_pm_notify is only available with CONFIG_PM=yUwe Kleine-König
This fixes a build breakage introduced by commit 4c2ef25fe0b8 ("mmc: fix all hangs related to mmc/sd card insert/removal during suspend/resume") Cc: David Brownell <david-b@pacbell.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-mmc@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Maxim Levitsky <maximlevitsky@gmail.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-14Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/amba_pl022: Fix probe and remove hook section annotations. spi/mpc5121: change annotations for probe and remove functions spi/bitbang: reinitialize transfer parameters for every message spi/spi-gpio: add support for controllers without MISO or MOSI pin spi/bitbang: add support for SPI_MASTER_NO_{TX, RX} modes SPI100k: Fix 8-bit and RX-only transfers spi/mmc_spi: mmc_spi adaptations for SPI bus locking API spi/mmc_spi: SPI bus locking API, using mutex Fix trivial conflict in drivers/spi/mpc512x_psc_spi.c due to 'struct of_device' => 'struct platform_device' rename and __init/__exit to __devinit/__devexit fix.
2010-08-13Merge branch 'msm-mmc_sdcc' of ↵Linus Torvalds
git://codeaurora.org/quic/kernel/dwalker/linux-msm * 'msm-mmc_sdcc' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: mmc: msm_sdcc: Rename config MMC_MSM7X00A to MMC_MSM mmc: msm_sdcc: Compile the driver for msm7x30 mmc: msm: fix up build breakage on !PM
2010-08-12Merge branch 'msm-core' of git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds
* 'msm-core' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: msm: mmc: Add msm prefix to platform data structure msm: trout: Remove extern declaration from source file arm: msm: Fix section mismatch in smd.c. arm: msm: trout add mmc support arm: msm: trout: add trout specific gpio interrupts arm: msm: remove unused #include <linux/version.h>
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
2010-08-12mmc_test: fix large memory allocationAdrian Hunter
- Fix mmc_test_alloc_mem. - Use nr_free_buffer_pages() instead of sysinfo.totalram to determine total lowmem pages. - Change variables containing memory sizes to unsigned long. - Limit maximum test area size to 128MiB because that is the maximum MMC high capacity erase size (the maxmium SD allocation unit size is just 4MiB) Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12mmc_test: add performance testsAdrian Hunter
mmc_test provides tests aimed at testing SD/MMC hosts. This patch adds performance tests. It is advantageous to have performance tests in a kernel module like mmc_test for the following reasons: - transfer times can be measured very accurately - arbitrarily large transfers are possible - the effect of contiguous vs scattered pages can be determined The new tests are: 23. Best-case read performance 24. Best-case write performance 25. Best-case read performance into scattered pages 26. Best-case write performance from scattered pages 27. Single read performance by transfer size 28. Single write performance by transfer size 29. Single trim performance by transfer size 30. Consecutive read performance by transfer size 31. Consecutive write performance by transfer size 32. Consecutive trim performance by transfer size Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12mmc_block: add support for secure discardAdrian Hunter
Secure discard is implemented by Secure Trim if the discard is unaligned or Secure Erase otherwise. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12omap_hsmmc: add erase capabilityAdrian Hunter
Disable the data (busy) timeout for erases and set the MMC_CAP_ERASE capability. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12mmc_block: add discard supportAdrian Hunter
Enable MMC to service discard requests. In the case of SD and MMC cards that do not support trim, discards become erases. In the case of cards (MMC) that only allow erases in multiples of erase group size, round to the nearest completely discarded erase group. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12mmc: add erase, secure erase, trim and secure trim operationsAdrian Hunter
SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11mmc: add ricoh e822 pci idPablo Castillo
Signed-off-by: Pablo Castillo <CyberCastle@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Gregg Lebovitz <gregg@lebovitz.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci: add auto CMD12 support for eSDHC driverJerry Huang
Add auto CMD12 command support for eSDHC driver. This is needed by P4080 and P1022 for block read/write. Manual asynchronous CMD12 abort operation causes protocol violations on these silicons. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci: add regulator supportMarek Szyprowski
This patch adds support for regulator API to sdhci core driver. Regulators can be used to disable power in suspended state to reduce dissipated energy. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11sdhci-s3c: add support for new card detection methodsMarek Szyprowski
On some Samsung SoCs not all SDHCI controllers have card detect (CD) line. For some embedded designs it is not even needed, because ususally the device (like SDIO flash memory or wifi controller) is permanently wired to the controller. There are also systems which have a card detect line connected to some of the external interrupt lines or the presence of the card depends on some other actions (like enabling a power regulator). This patch adds support for all these cases. The following card detection methods are possible: 1. internal sdhci host card detect line 2. external event 3. external gpio interrupt 4. no card detect line, controller will poll for the card 5. no card detect line, card is permanently wired to the controller (once detected host won't poll it any more) By default, all existing code would use method #1, what is compatible with the previous version of the driver. In case of external event, two callbacks must be provided in platdata: ext_cd_init and ext_cd_cleanup. Both of them get a callback to a function that notifies the s3c-sdhci host contoller as their argument. That callback function should be called from the even dispatcher to let host notice the card insertion/removal. In case of external gpio interrupt, a gpio pin number must be provided in platdata (ext_cd_gpio parameter), as well as the information about the polarity of that gpio pin (ext_cd_gpio_invert). By default (ext_cd_gpio_invert == 0) gpio value 0 means 'card has been removed', but this can be changed to 'card has been removed' when ext_cd_gpio_invert == 1. This patch adds all required changes to sdhci-s3c driver. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-04 03:29:50 +0000