summaryrefslogtreecommitdiff
path: root/drivers/mtd/bcm47xxpart.c
AgeCommit message (Collapse)Author
2015-01-07mtd: bcm47xxpart: support SquashFS with an original magicRafał Miłecki
SquashFS is supposed to use magic defined as SQUASHFS_MAGIC. What we were supporting so far (SQSH_MAGIC) is something ZTE specific. This patch adds support for Xiaomi R1D. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-01-07mtd: bcm47xxpart: lower minimal blocksize to 4Ki (from 64Ki)Rafał Miłecki
Some devices like Netgear WNR1000v3 or WGR614v10 have partitions aligned to 0x1000. Using bigger blocksize stopped us from detecting some parts. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-01-07mtd: bcm47xxpart: support TRX data partition being UBIRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-22mtd: bcm47xxpart: only register partitions if the trx header was filledHauke Mehrtens
Sometimes the trx offsets are 0, in that case there is no partition and we should not try to add one. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> [Brian: rewrapped] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-22mtd: bcm47xxpart: alloc memory for more partitionsRafał Miłecki
This is needed for some new Netgear devices (e.g. R6250). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: bcm47xxpart: find NVRAM partitions in middle blocksRafał Miłecki
Old devices used to have NVRAM at the very end of flash and they could be unaligned (starting at some offset in a block). In new devices NVRAM can be located quite randomly, however it seems to always start at the beginning of a block. For example Netgear R6250 has NVRAM located right after the bootloader, before the kernel partition. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: bcm47xxpart: allow enabling on ARCH_BCM_5301XRafał Miłecki
Home routers based on SoCs like BCM53010 (AKA BCM4708) use flashes which can be nicely partitioned with bcm47xxpart. Header bcm47xx_nvram.h is not available on bcm53xx, so don't include it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: bcm47xxpart: avoid overflowing when registering trxRafał Miłecki
Our code parsing "trx" header registers few partitions at once (in one loop iteration). Add extra check in that place. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: bcm47xxpart: fix off by one in partitions limitRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-07mtd: bcm47xxpart: alternative MAGIC for board_data partitionRafał Miłecki
Some devices (like WNDR3700v3) have board_data without MPFR magic, some extra header or extra NVRAM around 0x100. In such case we have to look for another magic which is BD 0B 0D BD (BD probably stands for Board Data). It's located "far far away", so instead of extending buffer add another mtd_read. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-07mtd: bcm47xxpart: find boot partition by CFE magicRafał Miłecki
Some devices have even nicer-to-recognize CFE thanks to the magic. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: make register_mtd_parser return voidAxel Lin
register_mtd_parser never fails; hence make it return void. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: bcm47xxpart: detect "factory" partitionRafał Miłecki
A new type of partition with magic FCTY was found on Huawei E970: 46 43 54 59 4b 51 37 4e 41 42 31 38 41 32 39 30 |FCTYKQ7NAB18A290| Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: bcm47xxpart: detect block aligned Squashfs partitionRafał Miłecki
Most of the bcm47xx devices use TRX format for storing kernel and some partition like Squashfs or JFFS2. This is pretty flexible solution, CFE (the bootloader) just writes (and later boots) TRX at some hardcoded place and paritions can vary in the size. However some devices don't use TRX format. Very recently we have discovered ZTE H218N that has kernel and rootfs partitions at some "random" places. This patch allows Linux find a rootfs partition after installing custom image with a CFE bootloader. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06mtd: bcm47xxpart: handle malloc failuresHauke Mehrtens
Handle return NULL in malloc. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-03-08mtd: bcm47xxpart: look for NVRAM at the end of deviceRafał Miłecki
NVRAM is always placed at the end of device and it does not have to start at the beginning of a block, so check few possible offsets. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-03-08Revert "mtd: bcm47xxpart: improve probing of nvram partition"Rafał Miłecki
This reverts commit be3781b71ac03723b552dc156931620634ef1b22. Some CFE bootloaders have NVRAM at offset 0x1000. With that patch we were detecting such a bootloaders as a standard NVRAM partition. Changing anything in this pseudo-NVRAM resulted in corrupted bootloader and bricked device! Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-03-02Merge tag 'for-linus-20130301' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD update from David Woodhouse: "Fairly unexciting MTD merge for 3.9: - misc clean-ups in the MTD command-line partitioning parser (cmdlinepart) - add flash locking support for STmicro chips serial flash chips, as well as for CFI command set 2 chips. - new driver for the ELM error correction HW module found in various TI chips, enable the OMAP NAND driver to use the ELM HW error correction - added number of new serial flash IDs - various fixes and improvements in the gpmi NAND driver - bcm47xx NAND driver improvements - make the mtdpart module actually removable" * tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd: (45 commits) mtd: map: BUG() in non handled cases mtd: bcm47xxnflash: use pr_fmt for module prefix in messages mtd: davinci_nand: Use managed resources mtd: mtd_torturetest can cause stack overflows mtd: physmap_of: Convert device allocation to managed devm_kzalloc() mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement. mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional. mtd: atmel_nand: avoid to report an error when lookup table offset is 0. mtd: bcm47xxsflash: adjust names of bus-specific functions mtd: bcm47xxpart: improve probing of nvram partition mtd: bcm47xxpart: add support for other erase sizes mtd: bcm47xxnflash: register this as normal driver mtd: bcm47xxnflash: fix message mtd: bcm47xxsflash: register this as normal driver mtd: bcm47xxsflash: write number of written bytes mtd: gpmi: add sanity check for the ECC mtd: gpmi: set the Golois Field bit for mx6q's BCH mtd: devices: elm: Removes <xx> literals in elm DT node mtd: gpmi: fix a dereferencing freed memory error mtd: fix the wrong timeo for panic_nand_wait() ...
2013-02-15MIPS: BCM47XX: add bcm47xx prefix in front of nvram function namesHauke Mehrtens
The nvram functions are exported and used by some normal drivers. To prevent name clashes with ofter parts of the kernel code add a bcm47xx_ prefix in front of the function names and the header file name. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4744/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-04mtd: bcm47xxpart: improve probing of nvram partitionHauke Mehrtens
The nvram in the nvram partition does not start at the beginning of the partition on every device. Sometimes they are stating in the middle of a partition or the first 0x1000 bytes are free. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04mtd: bcm47xxpart: add support for other erase sizesHauke Mehrtens
To make the partitions writable they should aligned to erase sizes of the flash. If the erase size is small use 0x10000. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04mtd: bcm47xxpart: register extra "firmware" partitionRafał Miłecki
It's required for accessing trx header (usually re-calculating a checksum) and for writing a new firmware. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-02-04mtd: bcm47xxpart: simplify size calculation to one loopRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2012-09-29mtd: bcm47part driver for BCM47XX chipsetsRafał Miłecki
This driver provides parser detecting partitions on BCM47XX flash memories. It has many differences in comparison to BCM63XX, like: 1) Different CFE with no more trivial MAGICs 2) More partitions types (board_data, ML, POT) 3) Supporting more than 1 flash on a device which resulted in decision of writing new parser. It uses generic mtd interface and was successfully tested with Netgear WNDR4500 router which has 2 flash memories: serial one and NAND one. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>