summaryrefslogtreecommitdiff
path: root/drivers/mtd/devices/Makefile
AgeCommit message (Collapse)Author
2015-06-11mtd: powernv: Add powernv flash MTD abstraction driverCyril Bur
Powerpc powernv platforms allow access to certain system flash devices through a firmwarwe interface. This change adds an mtd driver for these flash devices. Minor updates from Jeremy Kerr and Joel Stanley. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Reviewed-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-22mtd: nand: Move ELM driver and rename as omap_elmEzequiel García
The ELM driver is only used by the OMAP NAND driver, so let's move it to the nand/ directory. Additionally, let's rename it to a less confusing name, so the module is built with a meaningful name, instead of the previous 'elm.ko'. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-20mtd: st_spi_fsm: Allocate resources and register with MTD frameworkLee Jones
This is a new driver. It's used to communicate with a special type of optimised Serial Flash Controller called the FSM. The FSM uses a subset of the SPI protocol to communicate with supported NOR-Flash devices. Acked-by Angus Clark <angus.clark@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-04-05mtd: doc: remove support for DoC 2000/2001/2001+Artem Bityutskiy
These drivers are deprecated for very long time, and we have a different driver for these called "diskonchip". Thus, kill the ancient cruft. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-02-04mtd: devices: elm: Add support for ELM error correctionPhilip Avinash
The ELM hardware module can be used to speedup BCH 4/8/16 ECC scheme error correction. For now only 4 & 8 bit support is added Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-29mtd: basic (read only) driver for BCMA serial flashRafał Miłecki
This registers MTD driver for serial flash platform device. Right now it supports reading only, writing still has to be implemented. Artem: minor amendments. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: ST SPEAr: Add SMI driver for serial NOR flashShiraz Hashim
SPEAr platforms (spear3xx/spear6xx/spear13xx) provide SMI (Serial Memory Interface) controller to access serial NOR flash. SMI provides a simple interface for SPI/serial NOR flashes and has certain inbuilt commands and features to support these flashes easily. It also makes it possible to map an address range in order to directly access (read/write) the SNOR over address bus. This patch intends to provide serial nor driver support for spear platforms which are accessed through SMI. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-10-14mtd: Add DiskOnChip G3 supportRobert Jarzmik
Add support for DiskOnChip G3 chips. The support is quite limited yet : - no flash writes/erases are implemented - ECC fixes are not implemented - powerdown is not implemented - IPL handling is not yet done On the brighter side, the chip reading does work. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2010-03-18mtd: small typo in MakefileMatteo Croce
Cosmetic fix: the path in the Makefile is wrong Signed-off-by: Matteo Croce <matteo@teknoraver.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: SST25L (non JEDEC) SPI Flash driverRyan Mallon
Add support for the non JEDEC SST25L SPI Flash devices. [dwmw2: Some cleanups] Signed-off-by: Andre Renaud <andre@bluewatersys.com> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: "H Hartley Sweeten" <hartleys@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-13ps3/block: Replace mtd/ps3vram by block/ps3vramGeert Uytterhoeven
Convert the PS3 Video RAM Storage Driver from an MTD driver to a plain block device driver. The ps3vram driver exposes unused video RAM on the PS3 as a block device suitable for storage or swap. Fast data transfer is achieved using a local cache in system RAM and DMA transfers via the GPU. The new driver is ca. 50% faster for reading, and ca. 10% for writing. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-08mtd/ps3vram: Add ps3vram driver for accessing video RAM as MTDJim Paris
Add ps3vram driver, which exposes unused video RAM on the PS3 as a MTD device suitable for storage or swap. Fast data transfer is achieved using a local cache in system RAM and DMA transfers via the GPU. Signed-off-by: Vivien Chappelier <vivien.chappelier@free.fr> Signed-off-by: Jim Paris <jim@jtan.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-06-04MTD/JFFS2: remove CVS keywordsAdrian Bunk
Once upon a time, the MTD repository was using CVS. This patch therefore removes all usages of the no longer updated CVS keywords from the MTD code. This also includes code that printed them to the user. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-03Revert "[MTD] Driver for AT26Fxxx dataflash devices"David Woodhouse
This reverts commit 340ea370c2ce89d1c15fbf785460f2f74314ce58. It's not needed given the other m25p80 patch (which now handles at26 "dataflash" as well as most other standard SPI flash chips), and requires a controller driver that won't be merged upstream (supplanted by drivers/spi/atmel_spi.c) ... the submitter of that at91_dataflash26.c driver concurred. Requested by David Brownell <david-b@pacbell.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17[MTD] Driver for AT26Fxxx dataflash devicesHans-Jürgen Koch
Add support for AT26Fxxx dataflash devices. These devices have a quite different commandset than the AT45xxx chips, which are handled by at91_dataflash.c, so a combined driver turned out to be more ugly than useful. Tested only on AT26F004. Signed-off-by: Hans-Jürgen Koch <hjk@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-08Remove inter_module_xxx() from DiskOnChip drivers.David Woodhouse
Finally putting it back how it was before Keith got at it -- yay :) Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-11[PATCH] Remove blkmtdJoern Engel
Remove the blkmtd driver. - An alternative exists (block2mtd) that hasn't had bug report for > 1 year. - Most embedded people tend to use ancient kernels with custom patches from mtd cvs and elsewhere, so the 1 year warning period neither helps nor hurts them too much. - It's in the way of klibc. The problems caused by pulling blkmtd support are fairly low, while the problems caused by delaying klibc can be fairly substantial. At best, this would be a severe burden on hpa's time. Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-13[PATCH] spi: M25 series SPI flashMike Lavender
This was originally a driver for the ST M25P80 SPI flash. It's been updated slightly to handle other M25P series chips. For many of these chips, the specific type could be probed, but for now this just requires static setup with flash_platform_data that lists the chip type (size, format) and any default partitioning to use. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Mike Lavender <mike@steroidmicros.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13[PATCH] spi: mtd dataflash driverDavid Brownell
This is a conversion of the AT91rm9200 DataFlash MTD driver to use the lightweight SPI framework, and no longer be AT91-specific. It compiles down to less than 3KBytes on ARM. The driver allows board-specific init code to provide platform_data with the relevant MTD partitioning information, and hotplugs. This version has been lightly tested. Its parent at91_dataflash driver has been pretty well banged on, although kernel.org JFFS2 dataflash support was acting broken the last time I tried it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-06 13:28:53 +0000