summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2013-02-05Merge tag 'for-linus-20130204' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fixes from David Woodhouse: "A small set of simple regression and build fixes for 3.8: - Fix a warning introduced in ONFI NAND probe - Fix commandline partition parsing - Require BITREVERSE for DiskOnChip G3 driver - Fix build failure for davinci_nand as module - Bump NFLASH_READY_RETRIES for bcm47xxnflash" * tag 'for-linus-20130204' of git://git.infradead.org/linux-mtd: mtd: nand: onfi don't WARN if we are in 16 bits mode mtd: physmap_of: fix cmdline partition method w/o linux, mtd-name mtd: docg3 fix missing bitreverse lib mtd: davinci_nand: fix modular build with CONFIG_OF=y mtd: bcm47xxnflash: increase NFLASH_READY_RETRIES
2013-01-19mtd: nand: onfi don't WARN if we are in 16 bits modeMatthieu CASTET
Commit ff3206b2450499203532af2505a7f6f8413e92c0 ('mtd: nand: onfi need to be probed in 8 bits mode') adds a WARN if the onfi probe is in 16 bits mode. This allows to detect driver that need to be fixed, but this is a bit noisy¹. Transform the WARN in a pr_err. ¹ http://article.gmane.org/gmane.linux.ports.arm.omap/91317 Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-01-19mtd: physmap_of: fix cmdline partition method w/o linux, mtd-nameBaruch Siach
Commit d68cbdd4fb (mtd: physmap_of: allow to specify the mtd name for retro compatiblity) broke cmdline partitioning using dev_name() in the kernel command line. of_property_read_string() does not touch mtd_name when linux,mtd-name is not present in the device tree, which causes map.name to be set to a random value. Fix this by initializing mtd_name to NULL. Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-01-15mtd: docg3 fix missing bitreverse libRobert Jarzmik
Fix missing dependency which can cause a build error such as: ERROR: "byte_rev_table" [drivers/mtd/devices/docg3.ko] undefined! Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-01-11mtd: davinci_nand: fix modular build with CONFIG_OF=ySergei Shtylyov
Commit cdeadd712f52b16a9285386d61ee26fd14eb4085 (mtd: nand: davinci: add OF support for davinci nand controller) has never been really build tested with the driver as a module. When the driver is built-in, the missing semicolon after structure initializer is "compensated" by MODULE_DEVICE_TABLE() macro being empty and so the initializer using the trailing semicolon on the next line; when the driver is built as a module, compilation error ensues, and as the 'davinci_all_defconfig' has the NAND driver modular, this error prevents DaVinci family kernel from building... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@vger.kernel.org # 3.7
2013-01-03Drivers: mtd: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-24mtd: bcm47xxnflash: increase NFLASH_READY_RETRIESRafał Miłecki
Recently imlemented writing support has shown that current num of retries is too low. Writing requires longer waiting than simple reading. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-12-20Merge tag 'upstream-3.8-rc1' of git://git.infradead.org/linux-ubiLinus Torvalds
Pull UBI update from Artem Bityutskiy: "Nothing exciting, just clean-ups and nicification. Oh, and one small optimization which makes UBI to use less RAM." * tag 'upstream-3.8-rc1' of git://git.infradead.org/linux-ubi: UBI: embed ubi_debug_info field in ubi_device struct UBI: introduce helpers dbg_chk_{io, gen} UBI: replace memcpy with struct assignment UBI: remove spurious comment UBI: gluebi: rename misleading variables UBI: do not allocate the memory unnecessarily UBI: use list_move_tail instead of list_del/list_add_tail
2012-12-19Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from David Woodhouse: - Various cleanups especially in NAND tests - Add support for NAND flash on BCMA bus - DT support for sh_flctl and denali NAND drivers - Kill obsolete/superceded drivers (fortunet, nomadik_nand) - Fix JFFS2 locking bug in ENOMEM failure path - New SPI flash chips, as usual - Support writing in 'reliable mode' for DiskOnChip G4 - Debugfs support in nandsim * tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits) mtd: nand: typo in nand_id_has_period() comments mtd: nand/gpio: use io{read,write}*_rep accessors mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited. mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems mtd: nand/docg4: fix and improve read of factory bbt mtd: nand/docg4: reserve bb marker area in ecclayout mtd: nand/docg4: add support for writing in reliable mode mtd: mxc_nand: reorder part_probes to let cmdline override other sources mtd: mxc_nand: fix unbalanced clk_disable() in error path mtd: nandsim: Introduce debugfs infrastructure mtd: physmap_of: error checking to prevent a NULL pointer dereference mtg: docg3: potential divide by zero in doc_write_oob() mtd: bcm47xxnflash: writing support mtd: tests/read: initialize buffer for whole next page mtd: at91: atmel_nand: return bit flips for the PMECC read_page() mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c mtd: nand: onfi need to be probed in 8 bits mode mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width mtd: nand: print flash size during detection mted: nand_wait_ready timeout fix ...
2012-12-17mtd: nandsim: use prandom_bytesAkinobu Mita
This also removes unnecessary memset call which is immediately overwritten with random bytes. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Laight <david.laight@aculab.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...
2012-12-13Merge tag 'pm-merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC power management and clock changes from Olof Johansson: "This branch contains a largeish set of updates of power management and clock setup. The bulk of it is for OMAP/AM33xx platforms, but also a few around hotplug/suspend/resume on Exynos. It includes a split-up of some of the OMAP clock data into separate files which adds to the diffstat, but gross delta is fairly reasonable." * tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support watchdog: OMAP: fixup for ARM multiplatform support ARM: EXYNOS: Add flush_cache_all in suspend finisher ARM: EXYNOS: Remove scu_enable from cpuidle ARM: EXYNOS: Fix soft reboot hang after suspend/resume ARM: EXYNOS: Add support for rtc wakeup ARM: EXYNOS: fix the hotplug for Cortex-A15 ARM: OMAP2+: omap_device: Correct resource handling for DT boot ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count ARM: OMAP2+: PRM: initialize some PRM functions early ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=n ARM: OMAP4: USB: power down MUSB PHY during boot ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP2xxx: clock: drop obsolete clock data ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections ARM: AM33xx: clock: drop obsolete clock data ARM: OMAP3xxx: clk: drop obsolete clock data ...
2012-12-13Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform conversion patches from Olof Johansson: "Here are more patches in the progression towards multiplatform, sparse irq conversions in particular. Tegra has a handful of cleanups and general groundwork, but is not quite there yet on full enablement. Platforms that are enabled through this branch are VT8500 and Zynq. Note that i.MX was converted in one of the earlier cleanup branches as well (before we started a separate topic for multiplatform). And both new platforms for this merge window, sunxi and bcm, were merged with multiplatform support enabled." Fix up conflicts mostly as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: zynq: Remove all unused mach headers ARM: zynq: add support for ARCH_MULTIPLATFORM ARM: zynq: make use of debug_ll_io_init() ARM: zynq: remove TTC early mapping ARM: tegra: move debug-macro.S to include/debug ARM: tegra: don't include iomap.h from debug-macro.S ARM: tegra: decouple uncompress.h and debug-macro.S ARM: tegra: simplify DEBUG_LL UART selection options ARM: tegra: select SPARSE_IRQ ARM: tegra: enhance timer.c to get IO address from device tree ARM: tegra: enhance timer.c to get IRQ info from device tree ARM: timer: fix checkpatch warnings ARM: tegra: add TWD to device tree ARM: tegra: define DT bindings for and instantiate RTC ARM: tegra: define DT bindings for and instantiate timer clocksource/mtu-nomadik: use apb_pclk clk: ux500: Register mtu apb_pclocks ARM: plat-nomadik: convert platforms to SPARSE_IRQ mfd/db8500-prcmu: use the irq_domain_add_simple() mfd/ab8500-core: use irq_domain_add_simple() ...
2012-12-13mtd: nand: typo in nand_id_has_period() commentsBrian Norris
The simple example provided in the comments for nand_id_has_period() actually has a period of 3, not 2. Silly mistake... Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-13mtd: nand/gpio: use io{read,write}*_rep accessorsMatthew Leach
The {read,write}s{b,w,l} operations are not defined by all architectures and are being removed from the asm-generic/io.h interface. This patch replaces the usage of these string functions in the mtd gpio accessors with io{read,write}{8,16,32}_rep calls instead. Signed-off-by: Matthew Leach <matthew@mattleach.net> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-13mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited.NeilBrown
If you create a block2mtd device that is larger than main memory, and write to all of it, then lots of pages will be dirtied but they will never be flushed out as nothing calls any variant of balance_dirty_pages. It would be nice to call set_page_dirty_balance(), but that isn't exported, so just call balance_dirty_pages_ratelimited() directly. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-13mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problemsWolfram Sang
It could happen (1 out of 100 times) that NAND did not start up correctly after warm rebooting, so the kernel could not find the UBI or DMA timed out due to a stalled BCH. When resetting BCH together with GPMI, the issue could not be observed anymore (after 10000+ reboots). We probably need the consistent state already before sending any command to NAND, even when no ECC is needed. I chose to keep the extra reset for BCH when changing the flash layout to be on the safe side. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Huang Shijie <b32955@freescale.com> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-12Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC updates from Olof Johansson: "This contains the bulk of new SoC development for this merge window. Two new platforms have been added, the sunxi platforms (Allwinner A1x SoCs) by Maxime Ripard, and a generic Broadcom platform for a new series of ARMv7 platforms from them, where the hope is that we can keep the platform code generic enough to have them all share one mach directory. The new Broadcom platform is contributed by Christian Daudt. Highbank has grown support for Calxeda's next generation of hardware, ECX-2000. clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also taken on maintainership of the platform. Beyond this there has been a bunch of work from a number of people on converting more platforms to IRQ domains, pinctrl conversion, cleanup and general feature enablement across most of the active platforms." Fix up trivial conflicts as per Olof. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits) mfd: vexpress-sysreg: Remove LEDs code irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids irq: versatile: delete dangling variable ARM: sunxi: add missing include for mdelay() ARM: EXYNOS: Avoid early use of of_machine_is_compatible() ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers ARM: sunxi: Add missing sun4i.dtsi file pinctrl: samsung: Do not initialise statics to 0 ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup ...
2012-12-12Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
2012-12-12Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
2012-12-12mtd: nand/docg4: fix and improve read of factory bbtMike Dunn
This patch does two things related to reading the factory badblock table during initialization: (1) fix error where a non-zero return code from docg4_read_page() is assumed to be an error (it was later changed to be max_bitflips; thanks to Brian Norris for bringing this to my attention a while back), and (2) if there is an error reading the factory bbt, it tries reading another (redundant) factory bbt table. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-12mtd: nand/docg4: reserve bb marker area in ecclayoutMike Dunn
Modify the nand_ecclayout to place the two bb marker bytes in the oob region off-limits to the user. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-12mtd: nand/docg4: add support for writing in reliable modeMike Dunn
The controller on the docg4 has a "reliable" mode, where consecutive 2k pages are used in parallel. The initial program loader (IPL) on my Treo 680 expects the secondary program loader (SPL) to be written in this mode. This patch adds support for writing data in reliable mode, by way of a module parameter. Support for reading in this mode (as the IPL does) is not supported yet, but alternate (even-numbered) 2k pages written in reliable mode can be read normally (odd-numbered pages will contain junk and generate ecc errors). Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-11Merge tag 'pm+acpi-for-3.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: - Introduction of device PM QoS flags. - ACPI device power management update allowing subsystems other than PCI to use it more easily. - ACPI device enumeration rework allowing additional kinds of devices to be enumerated via ACPI. From Mika Westerberg, Adrian Hunter, Mathias Nyman, Andy Shevchenko, and Rafael J. Wysocki. - ACPICA update to version 20121018 from Bob Moore and Lv Zheng. - ACPI memory hotplug update from Wen Congyang and Yasuaki Ishimatsu. - Introduction of acpi_handle_<level>() messaging macros and ACPI-based CPU hot-remove support from Toshi Kani. - ACPI EC updates from Feng Tang. - cpufreq updates from Viresh Kumar, Fabio Baltieri and others. - cpuidle changes to quickly notice governor prediction failure from Youquan Song. - Support for using multiple cpuidle drivers at the same time and cpuidle cleanups from Daniel Lezcano. - devfreq updates from Nishanth Menon and others. - cpupower update from Thomas Renninger. - Fixes and small cleanups all over the place. * tag 'pm+acpi-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (196 commits) mmc: sdhci-acpi: enable runtime-pm for device HID INT33C6 ACPI: add Haswell LPSS devices to acpi_platform_device_ids list ACPI: add documentation about ACPI 5 enumeration pnpacpi: fix incorrect TEST_ALPHA() test ACPI / PM: Fix header of acpi_dev_pm_detach() in acpi.h ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000 ACPI : do not use Lid and Sleep button for S5 wakeup ACPI / PNP: Do not crash due to stale pointer use during system resume ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set spi / ACPI: add ACPI enumeration support gpio / ACPI: add ACPI support PM / devfreq: remove compiler error with module governors (2) cpupower: IvyBridge (0x3a and 0x3e models) support cpupower: Provide -c param for cpupower monitor to schedule process on all cores cpupower tools: Fix warning and a bug with the cpu package count cpupower tools: Fix malloc of cpu_info structure cpupower tools: Fix issues with sysfs_topology_read_file cpupower tools: Fix minor warnings cpupower tools: Update .gitignore for files created in the debug directories ...
2012-12-11Merge tag 'pinctrl-for-v3.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl changes from Linus Walleij: "These are the first and major pinctrl changes for the v3.8 merge cycle. Some of this is used as merge base for other trees so I better be early on the trigger. As can be seen from the diffstat the major changes are: - A big conversion of the AT91 pinctrl driver and the associated ACKed platform changes under arch/arm/max-at91 and its device trees. This has been coordinated with the AT91 maintainers to go in through the pinctrl tree. - A larger chunk of changes to the SPEAr drivers and the addition of the "plgpio" driver for the SPEAr as well. - The removal of the remnants of the Nomadik driver from the arch/arm tree and fusion of that into the Nomadik driver and platform data header files. - Some local movement in the Marvell MVEBU drivers, these now have their own subdirectory. - The addition of a chunk of code to gpiolib under drivers/gpio to register gpio-to-pin range mappings from the GPIO side of things. This has been requested by Grant Likely and is now implemented, it is particularly useful for device tree work. Then we have incremental updates all over the place, many of these are cleanups and fixes from Axel Lin who has done a great job of removing minor mistakes and compilation annoyances." * tag 'pinctrl-for-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (114 commits) ARM: mmp: select PINCTRL for ARCH_MMP pinctrl: Drop selecting PINCONF for MMP2, PXA168 and PXA910 pinctrl: pinctrl-single: Fix error check condition pinctrl: SPEAr: Update error check for unsigned variables gpiolib: Fix use after free in gpiochip_add_pin_range gpiolib: rename pin range arguments pinctrl: single: support gpio request and free pinctrl: generic: add input schmitt disable parameter pinctrl/u300/coh901: stop spawning pinctrl from GPIO pinctrl/u300/coh901: let the gpio_chip register the range pinctrl: add function to retrieve range from pin gpiolib: return any error code from range creation pinctrl: make range registration defer properly gpiolib: rename find_pinctrl_* gpiolib: let gpiochip_add_pin_range() specify offset ARM: at91: pm9g45: add mmc support ARM: at91: Animeo IP: add mmc support ARM: at91: dt: add mmc pinctrl for Atmel reference boards ARM: at91: dt: at91sam9: add mmc pinctrl support ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards ...
2012-12-10Revert "revert "Revert "mm: remove __GFP_NO_KSWAPD""" and associated damageLinus Torvalds
This reverts commits a50915394f1fc02c2861d3b7ce7014788aa5066e and d7c3b937bdf45f0b844400b7bf6fd3ed50bac604. This is a revert of a revert of a revert. In addition, it reverts the even older i915 change to stop using the __GFP_NO_KSWAPD flag due to the original commits in linux-next. It turns out that the original patch really was bogus, and that the original revert was the correct thing to do after all. We thought we had fixed the problem, and then reverted the revert, but the problem really is fundamental: waking up kswapd simply isn't the right thing to do, and direct reclaim sometimes simply _is_ the right thing to do. When certain allocations fail, we simply should try some direct reclaim, and if that fails, fail the allocation. That's the right thing to do for THP allocations, which can easily fail, and the GPU allocations want to do that too. So starting kswapd is sometimes simply wrong, and removing the flag that said "don't start kswapd" was a mistake. Let's hope we never revisit this mistake again - and certainly not this many times ;) Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-10mtd: mxc_nand: reorder part_probes to let cmdline override other sourcesLothar Waßmann
The cmdline is the easiest to change source of information. Thus let it take precedence over 'RedBoot' and 'ofpart'. This makes the mxc_nand driver to be in sync with all other NAND drivers that support 'cmdlinepart' partition parsing. Also change 'const char *' to 'const char const *' as advised by checkpatch.pl Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10mtd: mxc_nand: fix unbalanced clk_disable() in error pathLothar Waßmann
If nand_scan_ident() or nand_scan_tail() fails, the NAND chip may have been deselected and the clock already disabled. Thus, check 'clk_act' in the error path to decide whether the clock still needs to be disabled. This fixes a: |WARNING: at drivers/clk/clk.c:472 __clk_disable+0x3c/0x78() Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10mtd: nandsim: Introduce debugfs infrastructureEzequiel Garcia
It's more user friendly to report debug information and statistics through debugfs, than to use printing facilites. This patch introduces a very minimal debugfs infrastructure and moves eraseblock wear report to an entry located at: /sys/kernel/debug/nandsim/wear_report This means we can remove rptwear option and just let the user get the wear report when we needs to. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10mtd: physmap_of: error checking to prevent a NULL pointer dereferenceAnton Prins
This patch solves a NULL pointer dereference, this may occur if the tuple is not mappable (jumps to continue in the for-loop). Out of the loop possible results are: - info->list_size == 0 if no of the tuples is mappable - info->list_size == 1 - info->list_size > 1 If no one of the supplied tuples is mappable (info->list_size == 0) and info->cmtd will not be set. But it is used in mtd_device_parse_register, OOPS! actually it should generate an error in this case! Signed-off-by: Anton Prins <anton.prins@nl.bosch.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10mtg: docg3: potential divide by zero in doc_write_oob()Dan Carpenter
If we set oobdelta to zero then we will either return -EINVAL or hit a divide (modulus) by zero on the next line when we check "(ooblen % oobdelta)". It's better to just return -EINVAL here instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10mtd: bcm47xxnflash: writing supportRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10UBI: embed ubi_debug_info field in ubi_device structEzequiel Garcia
ubi_debug_info struct was dynamically allocated which is always suboptimal, for it tends to fragment memory and make the code error-prone. Fix this by embedding it in ubi_device struct. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10UBI: introduce helpers dbg_chk_{io, gen}Ezequiel Garcia
With this patch code is a bit more readable and there's no generated code or functionality impact. Furthermore, this abstracts implementation details and will allow to change ubi_debug_info in a less invasive way. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-04UBI: dont call ubi_self_check_all_ff() in __wl_get_peb()Richard Weinberger
As ubi_self_check_all_ff() might sleep we are not allowed to call it from atomic context. For now we call it only from ubi_wl_get_peb(). There are some code paths where it would also make sense, but these paths are currently atomic and only enabled when fastmap is used. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-04UBI: remove PEB from free tree in get_peb_for_wl()Richard Weinberger
If UBI is built without fastmap, get_peb_for_wl() has to remove the PEB manially from the free tree. Otherwise the requested PEB lives in two trees. Reported-by: Zach Sadecki <zsadecki@itwatchdogs.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-04mtd: tests/read: initialize buffer for whole next pageChristian Herzig
fix: do block-buffer initialize for the whole next page to zero. Signed-off-by: Christian Herzig <christian.herzig@keymile.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mtd: at91: atmel_nand: return bit flips for the PMECC read_page()Josh Wu
This patch fix pmecc's read_page() to return maximum number of bitflips, 0 if uncorrectable. In the commit: 3f91e94f7f511de74c0d2abe08672ccdbdd1961c ("mtd: nand: read_page() returns max_bitflips ()"), The ecc.read_page() is changed to return the maximum number of bitflips. And when meet uncorrectable bitflips it needs to return 0. See the comment in nand.h: * @read_page: function to read a page according to the ECC generator * requirements; returns maximum number of bitflips corrected in * any single ECC step, 0 if bitflips uncorrectable, -EIO hw error Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.cHarald Nordgard-Hansen
When working on a problem with some flash chips that lock up during write-buffer operations, I think there may be a bug in the linux handling of chips using cfi_cmdset_0002.c. The datasheets I have found for a number of these chips all specify that when aborting a write-buffer command, it is not enough to use the standard reset. Rather a "write-to-buffer-reset command" is needed. This command is quite similar for all chips, the main variance seem to be if the final 0xF0 can go to any address or must go to addr_unlock1. The bug is then in the recovery handling when timing out at the end of do_write_buffer, where using the normal reset command is not sufficient. Without this change, if the write-buffer command fails then any following operations on the flash also fail. Signed-off-by: Harald Nordgard-Hansen <hhansen@pvv.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mtd: nand: onfi need to be probed in 8 bits modeMatthieu CASTET
- NAND_CMD_READID want an address that it is not scaled on x16 device (it is always 0x20) - NAND_CMD_PARAM want 8 bits data Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus widthMatthieu CASTET
The driver call nand_scan_ident in 8 bit mode, then readid or onfi detection are done (and detect bus width). The driver should update its bus width before calling nand_scan_tail. This work because readid and onfi are read work 8 byte mode. Note that nand_scan_ident send command (NAND_CMD_RESET, NAND_CMD_READID, NAND_CMD_PARAM), address and read data The ONFI specificication is not very clear for x16 device if high byte of address should be driven to 0, but according to [1] it should be ok to not drive it during autodetection. [1] 3.3.2. Target Initialization [...] The Read ID and Read Parameter Page commands only use the lower 8-bits of the data bus. The host shall not issue commands that use a word data width on x16 devices until the host determines the device supports a 16-bit data bus width in the parameter page. Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mtd: nand: print flash size during detectionMatthieu CASTET
This help to detect bad flash identification in case the size is not present on the name (ONFI). Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mted: nand_wait_ready timeout fixMatthieu CASTET
nand_wait_ready timeout should not assume HZ=100. Make it independent of HZ value by using msecs_to_jiffies. Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mtd: bcm47xxnflash: support NAND_CMD_STATUSRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mtd: bcm47xxnflash: define some magic numbersRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mtd: remove the "chip" parameter in nand_get_device()Huang Shijie
There are two reasons to remove the "chip" parameter in nand_get_device(): [1] The nand_release_device() does not have the "chip" parameter. [2] We can get the nand_chip by the mtd->priv field. This patch removes the "chip" parameter in nand_get_device(). Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mtd: remove the de-select chip code in nand_release_device()Huang Shijie
The nand_get_device() does not select the chip, but nand_release_device() does de-select the chip. It is really strange. With the current code, nand_sync() will de-select the chip, even if the chip has never been selected. To make the balance of select/de-select chip, it's better to remove the de-select chip code in nand_release_device() which makes the code more clear. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mtd: m25p80: modify info for Micron N25Q128Liming Wang
Micron N25Q128 has two types of flash: - One is for 1.8v supply voltage, prefixed with "n25q128a11" and the jedec code is 0x20bb18. - Another is for 3v supply voltage, prefixed with "n25q128a13" and the jedec code is 0x20ba18. So modify the original type info and add another type for Micron N25Q128. Signed-off-by: Liming Wang <walimisdev@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mtd cs553x_nand: Initialise ecc.strength before nand_scan()Nathan Williams
Loading cs553x_nand with Hynix H27U1G8F2BTR NAND flash causes this bug: kernel BUG at drivers/mtd/nand/nand_base.c:3345! invalid opcode: 0000 [#1] Modules linked in: cs553x_nand(+) vfat fat usb_storage ehci_hcd usbcore usb_comr Pid: 436, comm: modprobe Not tainted 3.6.7 #1 EIP: 0060:[<c118d205>] EFLAGS: 00010296 CPU: 0 EIP is at nand_scan_tail+0x64c/0x69c EAX: 00000034 EBX: cea6ed98 ECX: 00000000 EDX: 00000000 ESI: cea6ec00 EDI: cea6ec00 EBP: 20000000 ESP: cdd17e48 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 CR0: 8005003b CR2: 0804e119 CR3: 0d850000 CR4: 00000090 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process modprobe (pid: 436, ti=cdd16000 task=cdd1c320 task.ti=cdd16000) Stack: c12e962c c118f7ef 00000003 cea6ed98 d014b25c 20000000 fffff007 00000001 00000000 cdd53b00 d014b000 c1001021 cdd53b00 d01493c0 cdd53b00 cdd53b00 d01493c0 c1047f83 d014b4a0 00000000 cdd17f9c ce4be454 cdd17f48 cdd1c320 Call Trace: [<c118f7ef>] ? nand_scan+0x1b/0x4d [<d014b25c>] ? init_module+0x25c/0x2de [cs553x_nand] [<d014b000>] ? 0xd014afff [<c1001021>] ? do_one_initcall+0x21/0x111 [<c1047f83>] ? sys_init_module+0xe4/0x1261 [<c1031207>] ? task_work_run+0x36/0x43 [<c1265ced>] ? syscall_call+0x7/0xb Code: fa ff ff c7 86 d8 00 00 00 01 00 00 00 e9 5f fc ff ff 68 f8 26 2e c1 e8 a7 EIP: [<c118d205>] nand_scan_tail+0x64c/0x69c SS:ESP 0068:cdd17e48 Initialising ecc.strength before the call to nand_scan() fixes this. Signed-off-by: Nathan Williams <nathan@traverse.com.au> Cc: stable@vger.kernel.org [3.4+] Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03UBI: replace memcpy with struct assignmentEzequiel Garcia
This kind of memcpy() is error-prone. Its replacement with a struct assignment is prefered because it's type-safe and much easier to read. Found by coccinelle. Hand patched and reviewed. Tested by compilation only. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier struct_name; struct struct_name to; struct struct_name from; expression E; @@ -memcpy(&(to), &(from), E); +to = from; // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>